OpenSUSE Install :: Default Root Partition Size For 11.2 - Too Large?
Jan 28, 2010
When I installed opensuse 11.2 64-bit (KDE) the installer set the root partition to 20GB by default. That seemed unnecessarily large, so I reduced it to 16GB. I then completed the install (basically a default KDE install minus games & educational stuff) and still had more than 8GB free. I'm aware that these days hard drive storage space is quite cheap, but it's not so cheap for me as I have an SSD. Would it not be reasonable to reduce the default root partition size to 12GB, or perhaps vary it according to the software package load selected?
I'm dual booting with Win Xp at the moment and have been google-ing and tinkering about with my distro and i'm learning new stuff everyday but I have a question about something that's been bothering me. I think i've figured out that the / partition is similar to the C: Drive in windows which contains program files n stuff am i right? and the home partition which contains users and their files is an offshoot of the root?
So if this is the case, i was in the expert partitioner in YAST to see how the the drive was partitioned and was wondering if the / partition was too big and if i could decrease the size and add it to the /home?. My sys specs are 512mb RAM Dell Dimension 3000 with an 80GB HDD 2.8Ghz Intel Celeron. I also have a 80Gb and 160Gb External laptop drives mainly for my movies n music n stuff. Also is the Swap partition a good size for the spec of computer i have?
I am using OS 11.0 Every time I boot my laptop (dell inspiron 9300 - ati video M300). I get the desktop display as 1920 X 1200. This is too large for my default. I use KRandRTray to resize back to 1024 X 768. How can I set 1024 X 768 as the default but still have the option to go to 1920 X 1200?
I would like to increase the size of my root partition on OpenSuse 11.3. Currently, I have 11.3 installed on a dual boot laptop with Windows 7. My partitions look as follows:-
As can be observed above, I have used almost 70% of the available partition space with only 1.7 GB remaining. I have plans to install Microsoft Office 2007 on Wine and I know that 1.7 GB is not enough for the installation. I don't mind reducing the size of my Windows partitions in order to increase the size of the root.
want to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
I installed Fedora 15/Gnome 3 because I liked the Universal Access Settings widget for controlling the appearance of my living room computer attached to my TV. It should (when it becomes more stable) make it easy to zoom in on the screen when I'm on the couch. There is also a Large Text setting that allows me to toggle between normal text size and perhaps 125% text size.
I'd like to set that value to about 200%, but don't see how to do it. dconf-editor didn't seem to have a way. gnome-tweak-tool has a way to make all fonts bigger or smaller but I want to easily switch between normal text size when I'm sitting close and large text from the UAS. Screwing around with gnome-tweak-tool would require me to be up-close. It looks like UAS is controlled by /usr/share/gnome-control-center/ui/uap.ui, but it is a wickedly complex xml file & I don't know what to edit. Is there a per user way to change the behavior?
I am relatively new to Linux and Opensuse. I created the / root partition and now it is growing and maxing out. I have partitioner available to me but how do I change the partition size when the root partition is mounted. Do I login as root and then umount or modify fstab and restart and change from command line or do I format and reinstall everything? I have room to expand but not sure how to manage this?
i am running ubuntu 10.10 and windows7 on a asus eee 1015. currently i have two partitions: 80GB for windows (NTFS) and 160Gb for Ubuntu (ext4).
I want to:
- shrink the windows partition (easy, no worries);
- Shrink the ubuntu partition
- join the space thus created in a third partition that i can use for storage, media etc accessible by both windows and ubuntu
The problem:
- i could not manage to get gparted live to run off USB stick (i get the unable to find medium.... error)
- even if i would get gparted to work and i succeed in shrinking the ubuntu partition as well, the two spaces reclaimed will be divided by the ubuntu partition, which means they cannot be joined in a third partition.
so here is what i want to do:
- shrink windows and create a new partition;
- format this new partition as ext4;
- somehow "clone" the data on my current ubuntu root into the new partition;
- format the current root as NTFS and use it as the storage partition
i am aware this may mean i would have to re-set grub etc but would the cloning of the partition be possible? that i would need to clone data from a 160G partition into a 40G partition.
BY THE WAY - forgot to mention that i have tried to load clonezilla off an USB drive and i get the same error: "unable to find medium..."
I recently installed Fedora 13 on an 80 gigabyte hard drive, and it split the space in two, giving root and the normal partition both 36 gigabytes. I need at least 60 gig or more for my home partition. What can I do to shrink the root one? I currently do not have accsess to the install media or a rescue disk.
I have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
I have setup my opensuse 11.3 machine w/ LVM support for everything but boot. I have the following disks:
/dev/sda1 - 70.57 MB /boot /dev/sda2 - 5.81 GB back up for original windows /dev/sda3 - 292.21 GB LVM group.
When I attempt to resize the 70.57 MB partition, it tells me that 70.57 mb is the max that this partition can be. This was true even during the install
My laptop has a 60GB hard drive, which my ex-husband set up with a 20GB partition for Windows XP and a 40GB partition with Suse 11, which suited me fine at the time. However, I'm now finding that I need to install a whole bunch of extra Windows programs relating to my work, and the 20GB partition is no longer sufficient, while I'm hardly using any space at all under Linux.
how I might go about redistributing the space between the two partitions (any other solutions to my lack of space problem also welcome)? Please bear in mind that I'm pretty clueless when it comes to this kind of thing!
When running the umount command like this as superuser: umount /dev/sda8. get the following message:umount: /home: device is busy.(In some cases useful info about processes that usethe device is found by lsof(8) or fuser(1))
I use Fedora 12 AMD64 and I partition my HDD with Default partitioning what happen when temp partition is full by files ?Can this happen ? for example my temp partition full by files and my system can not use temp partition .!can I say my Fedora clear temp after each reboot .?
I have installed ubuntu in my 500GB passport drive. The ubuntu partition size is 120GB. I want to increase the root partition size because i ran out of disk space for "/" I have installed Gparted and accidentally created new partition table. Then all my disk space turned into unallocated space. So, i immateriality rebooted my system. Then, I am not able to boot into the drive. Moreover it is not detecting in windows too. How to undone that "MISTAKE" ??
fedora 12.i have one partition which is mounted on a rootfiles folder having space of 700gb which is located on a /directory.but when im adding data on rootfiles my /root directory space is also getting increased.so could any one telme how to increase the size of root partition.i want to resize my rootfiles folder to 600db and want to add 100gb to my / directory.how can i do this plz helpme this is important 4 me.first i will free 100gb then i will add 100gb to root directory.but i dont want to loose any data on rootfiles folder.
what's the difference (if any) between choosing to boot from the MBR, the root partition or enabling neither? Referring to: pic23-MBR switch.png - Windows Live Would one be better for dual boots for example? (Using Vista too)
First upgrade to 11.3 no problem. Then I got a disk issue. so got an old 80 gig sata drive, config new partition table, format etc. Install perfect as ever.
Then grub failed ....no grub menue.
I changed to MRB boot. this worked but initrd takes a long time and sometime hangs ?!? What could be the issue ? Harddrive?!
During install process I assigned only 6GB for my root partition and now I'm almost running out of space. I have 11.1 installed and I wanted to update to 11.3 but there are problems with i855 video card with newest distro versions so I won't install it. Since everything is installed and configured I don't want to install 11.1 again.
I'm having some problems with a hosted openSUSE 11.2 server. It was running fine until I did a "zypper up" to apply patches. This included a kernel update.
On reboot the root partition does not mount the / partition giving the following error:
Unrecognized mount option "defaults.noatime", or missing value mount: wrong fs type, bad option, bad superblock on /dev/md2.
Through an Ubuntu rescue disk (this is what Hetzner provides) the disk can be mounted without problems.
( I installed a fresh openSUSE 11.2 with a similar configuration and got the same results after the update)
The server is a hosted installation from Hetzner in Germany with just the basics for LAMP setup.
The disk setup is as follows using software raid1: swap /dev/md0 (/dev/sda1 /dev/sdb1) /boot /dev/md1 (/dev/sda2 /dev/sdb2) / /dev/md2 (/dev/sda3 /dev/sdb3)
Recently, I had to switch harddrives on one of my servers due to the need for hardware.
However, when I switched back to the original harddrive I got a surprise : Instead of booting normally in OpenSuse 11.3, it booted in the grub shell.
I did a root ( hd0,1) but when I attempted the setup cmd it failed. Thinking that I probably was a configuration error ( nothing was changed - the drive had spent some time in a nice anti static bag ) I booted using a USB key.
To my surprise I got a message stating that parted couldn't read the other partitions ( boot and swap ) and hence I would not be able to edit then. Fortunately, the data partition seemed OK so I can backup the data.
Preferbly, I would like to be able to restore my original system.
I tried two times to make an new partition (after the FAT partition on it) on my external hard drive with YaST>Partitioner.Fist I had tried ext3 now I have ext2 on it.Both times the partition (or the corresponding folder in /media) was only writeable to the superuser/root but not to a normal user (readable to the normal user). Root is the owner.The FAT-Partition on the same external drive is owned by the normal user who was logged in as I plugged the USB-cable in.I can unmount both partitions als normal user in natilus.1. Can I start nautilus as root to change the permissions?2. What have I done wrong? Should I use an SuSE Live-CD or an CD with an special partitioning-program instead?ng X20) openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition). I have also 2 NTFS partitions for Windows XP (System and Data), and a FAT, a root (/) and a swarp partition.
I installed 11.4 (64 bit) and all went amazingly smooth. I created three logical partitions (boot, swap and home in this order) and an extended partition with root and backup. Just prior to the installation, my external backup drive went belly up so I created a 40 gig partition to "fill in" the backup duties until I purchased a new one. I got it and set it up and then deleted the 40 gig backup partition thinking I would just add the now unallocated space to the root partition but alas it was not meant to be. I can't resize the root partition while it's mounted and I can't unmount it and have a working system. The 40 gigs of space is sitting right next to root (no having to jump or resize other partitions to combine the two). Is there a way to do this or did I just waste 40 gigs worth of real estate.
I am so sorry but this is not for me. I cant make this work. I want to install windows xp back in my pc, i just give up with Linux, I lack the expertise to do anything here.
When I installed OpenSuse 11.2 it mounted I configured to mount all of my windows/NTFS partition. However, one problem is that only root can write to it. I was trying to change it to '777' permission. However, as root I can't change permission. chmod doesn't work and neither does using nautilus (as root) work.I even tried unmounting it and then doing a chmod. That didn't work either.
I just looked at the "posting permissions" and unfortunately I'm unable to insert the screen copy of the kde manager's representation of the goal I want to hit.I got a dual boot system with 4 hard disks and grub installed on /dev/sdd1. Windows xp sp2 (only used for professional audio tools, don't whip me ^^) is installed on /dev/sdc1. The disk sdc is partitioned with the following settings:
Code:
/dev/sdc1 * 1 498 4000153+ b W95 FAT32 /dev/sdc2 499 18922 147990780 f W95 Ext'd (LBA) /dev/sdc5 499 1494 8000338+ b W95 FAT32 /dev/sdc6 1495 18922 139990378+ 7 HPFS/NTFS
When I partitioned the disk I was believing 4 Go were sufficient for windows xp but after years I realized that many applications were using the C: by default (no way to change it thru regedit or another workaround, hard-coding probably) installing stuffs and under windows this is impossible to use such blessed things like the unix's symbolic links !So right now I'm a little tight with the remaining space to work with windows xp. (Of course the swap file has been moved to another partition since the first day I installed xp...)
I have is to use the 7Go of unused space on this disk to size up the /dev/sdc1 partition. When using kde partition manager I noticed that there is no way to use the unused disk space to size up /dev/sdc1 directly.Do you think if I create a partition with the 7 Go of unused space that there is a way to size up /dev/sdc1 without messing up the bootloader ? I don't think GRUB matters about the new partition, it should get the /dev/sdc7 entry. For the backup there is no problem this partition is completely backed up every two weeks (as an image) so the datas may not be lost as a real catastrophic... but if there is danger for the other partitions... that's will be more annoying... but solvable ^^
Once partitioned I believe that there will be a way to "merge" the /dev/sdc1 and /dev/sdc7 partitions and then I would enjoy a new xp partition with 7Gb of free space (it would change from my actual 300Mb !!).Technically it would be possible this is just a question of chaining the different blocks each others and refer to the new space added.The last block in /dev/sdc1 would point to the first block that starts /dev/sdc7 and "that's all"... and /dev/sdc7 would disappear as a partition.
I want to install Linux Mint 11 (just came out) to a USB drive. My USB drive is 34 gb. So I want to put a 1-2 gb partition on it and install mint just to that. Is that possible? I am a noob so I want to use [URL] but the screenshots don't show an option for a partition or state any extra steps that might be involved in doing this (there's a tutorial for doing this for one of the Ubuntus using fdisk, but I don't have any linux installs right now).
I am planning to dual boot Bt4 + SL 6 or Debian 6 ( whatever comes first ) So i am wondering what will be the default disk footprint of Bt4... Never used it installed in HDD only in usb install or live mode...
