OpenSUSE Install :: Gnome3 - NVidia Drivers - Multiple Monitor Fail ?
Jul 24, 2011
I have installed openSUSE with Gnome3.
I had to install the nVidia proprietary drives so the OS would boot into Gnome3 and not fail safe mode. Without the proprietary drivers installed the display settings said:
Driver: software rasterizer in use
After installing the nVidia drivers Gnome3 works in one monitor, but I would like to be able to use my other two monitors (totaling three with two video cards.)
When I run nvidia-settings to generate an xorg.conf file it hangs, so I used nvidia-xorgconf to generate the xorg file and then used nvidia-settings to configure my extra screens.
This fails with a permissions error, running sudo nvidia-settings fails with the following error:
ERROR:
So, I ran nvidia-settings, saved the settings file to my /home/$USER dir, then copied xorg.conf to /etc/X11/
Logging out and logging back into Gnome fails with the error:
This problem extends to Ubuntu running Gnome3, so my thinking is:
a) Imma id10t and something in my xorg.conf file is wrong,
b) there is an issue with Gnome3/nVidia/Multiple displays.
I would really like to use Gnome3, it works on multiple other machines (ironically all ATI devices) just not the machine I use all day long...
Here is my xorg.conf file as generated by nvidia-settings.
Code:
View 6 Replies
ADVERTISEMENT
Apr 22, 2015
When i finish install debian7.8 wheezy in my Acer computer(graphics :GT750M+ Inter HD Graphics Family),
it appear:
"GNOME3 Failed to Load"
" Unfortunately GNOME 3failed to start properly anmode"
"This most likely means your system(graphics hardwcapable of ....."
i check system's Driver status:Gallium 0.4 on llvmpipe(LLVM 0x209) Experience Fallback so i try to install nvidia drivers in debian,but i have failed many times. everytimes i finish install nvidia drivers i 'startx " failed
View 3 Replies
View Related
May 25, 2011
I have recently installed FC15 on my system. Dual monitor support seems to be broken with my setup. I am using the latest NVIDIA binary blob driver (270.41.19). I compiled my own kernel for it, version 2.6.39.
When gnome3 starts it almost manages to boot up, but then it crashes and gives me the option of logging out. I have my system booting into target 'multi-user.target' since I was doing some other stuff and I use `startx' to start gnome3. I tried running having X use xinerama and not use xinerama, both cause gnome3 to crash, albeit in different ways. Other than that I am running a stock install as far as I know.
If there are some logs I should be looking at for gnome3.
View 4 Replies
View Related
Jun 7, 2010
I am trying to install nVidia drivers on CentOS 5.4 and it is requiring kernel-source
# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
For the installation of kernel source, I have followed the steps on [URL]. I followed the steps under 2.1 and they worked for me. Now what can be done for the installation of the kernel-source package. When I am trying to install nVidia drivers, I am getting error, following are lines from installation log of Driver.
-> Tagging shared libraries with chcon -t textrel_shlib_t.
-> License accepted.
-> Installing NVIDIA driver version 185.18.31.
-> No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site; this means that the installer will need to compile a kernel interface for your kernel.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
ERROR: Unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL]. I want to install driver.
# rpm -q kernel-
kernel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-devel
kernel-devel-2.6.18-92.el5
kernel-devel-2.6.18-164.15.1.el5.centos.plus
kernel-devel-2.6.18-194.3.1.el5
kernel-devel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-source
package kernel-source is not installed
The nVidia Driver I am installing is:
NVIDIA-Linux-x86-185.18.31-pkg1.run
# uname -a
Linux harvey 2.6.18-194.3.1.el5PAE #1 SMP Thu May 13 13:48:44 EDT 2010 i686 i686 i386 GNU/Linux
Only reason to install the proper driver is to use dual monitor.
View 6 Replies
View Related
Mar 9, 2010
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
How can I fix the display settings?
View 6 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
May 12, 2011
NVidia drivers fail to load ?
Code:
If I hit the option Restart X it boots and displays normally but I always get this while booting
View 1 Replies
View Related
Mar 3, 2010
I tried installing the latest NVidia proprietary drivers, but it was epic fail.
OpenSUSE 11.2
It fails with an "unable to compile kernel module" error.
I stupidly overwrote the log file without backing it up. It had a lot of compile warnings, but I didn't see anything that looked like a compile error. I'll try to generate it again.
View 8 Replies
View Related
Apr 17, 2010
Laptop with Nvidia integrated GO 6100. Now stuck in low graphics mode.
Uninstall/reinstall ENVY. No joy.
"Hardware Drivers" reports that Nvidia drivers version 173 are activated at the moment, but not in use. Got the same report from the 185s. 'nvidia-xconfig' produced no results.
Not sure where to go from here. Please assist.
On a positive note, my onboard Broadcom wireless is working without ndiswrapper.
View 2 Replies
View Related
Feb 7, 2010
I need to install the latest drivers for my Nvidia card. I have the Quadro FX 1800.I don't think the Nvidia One click installation will work with this card.I downloaded the drivers from Nvidia and tried to install them but their directions are very confusing. It says "exit x windows" and "restart in init 3". I don't know what that means.Can someone tell me step-by-step how to compile and install the nvidia drivers?I have opensuse 11.2 64-bit clean install with all the defaults, and the Quadro FX 1800.
View 6 Replies
View Related
Apr 3, 2010
I am running openSUSE 11.2 64-bit KDE version. I would like to install drivers for my Nvidia GTX 285 1gb video card. How exactly would I do this?
View 2 Replies
View Related
Mar 30, 2010
Lappy is a Dell XPS M1330
Intel core 2 T7500 2.2Ghz 4gig Ram
Nvidia GeForce 8400M GS
HDD 320
1 64bit system installs but wont let me do updates so now using 32bit thats ok
2 How do I update drivers? My screen seems to have ghosting around the edges
3 On firefox when scrolling down the page its jerky Ive used firefox on most of my Pcs and never had this problem Im duel booting ubuntu and suse and using the internet on ubuntu so far other than these problems suse is fine
View 3 Replies
View Related
Feb 10, 2010
Alright I've been trying despretly to installed the nvidia drivers.If reinstalled them over and over but it just wont work. I have Gefore GTX 275 and I installed it using the one-click install.
It apperently installs but it doesn't run or something.
View 6 Replies
View Related
Jul 15, 2010
Like a guy earlier today report a problem with Opensuse 11.2 working fine on his machine but 11.3 is not. I have somewhat the same problem. The default installation freezes randomly. I have seen this error before with Intel video cards but never with NVIDIA. Right now, I'm using VESA in failsafe mode and trying to install some drivers from this repo.
I'll try and find a fix for this. (Hope their is one)BTW, can anyone confirm when the official drivers for NVIDIA cards are coming out?
View 8 Replies
View Related
Apr 24, 2011
Basically everything was going fine, and i was enjoying the OpenSuse experience, then downloaded djl (Games Launcher) , installed some games and found that i had a very very very bad frame rate (about 1FPS), and my GPU is a NVIDIA GTS250 (1GB), and runs most games flawlessly under m$, so i went about installing the graphics drivers for my card. I followed the instructions and was under the assumption that i installed the correct ones, but now i cannot boot into any graphical interface. I think that it should be a graphics issue, as this was one of the few things done before rebooting. I have tried booting into the normal mode, and the failsafe, I have read many other "Not booting'' posts, and have tried their solutions without success, there include: Changing the boot parameters Logging in and manually trying to boot up the gui (init 3.... init 5... etc)
When the computer tries to load up OpenSuse in normal mode, it comes up with the normal loading screen, and then about 90% of the way it stops for about 30 seconds, and then switches over to a CLI, asking for a login, going through the log a couple of things fail, did have these noted down (but cannot find and will post along with other commands that i am asked to do) I want to try and avoid a reinstall as it took me a long time to get the WiFi card working.
View 9 Replies
View Related
Aug 26, 2011
I've recently jump from the Ubuntu/Mint ship, and figured I've give a polished KDE distribution a shot. Of course I turned to OpenSuSE, and I love it so far. I've resisted KDE quite a lot since 4.x came out but it's really come along. Much better than the (in my opinion) monstrous disaster that Gnome has become.
Anyways, on to my problem: I've installed the proprietary Nvidia drivers via the one-click-install shown in the wiki, and that worked great. But now my resolution at boot - that is the boot/loading screen, not my desktop - is shown at a very low resolution instead of my native resolution, like it was with OpenSuSE's default open-source Nvidia driver, which I'm guessing is Nouveau. On Ubuntu, this was pretty easy to correct; all you had to do was edit /etc/default/grub and put your resolution there, and tinker with some other options so that instead of Plymouth trying to set its own, it just carries over Grub's specified resolution. But I can't seem to do that with OpenSuSE. For one, I don't see /etc/default/grub, and more than that, I don't think you guys use Plymouth. I could be wrong on that second point, though. So, how can I change the boot screen's resolution to my native resolution? I'm using the latest Stable release (11.4) and latest Nvidia drivers. Other than that, the install is new.
View 5 Replies
View Related
Mar 10, 2010
i have a viewsonic VA712b monitor that used to get 1280x1024 resolution on my dell optiplex gx260 that had the intel video card.i upgraded my motherboard cpu and memory..the nvidia 6100 that is onboard seems like it would be an improvement to my old onboard intel but the best resolution i can get is 1024x768
i installed the nvidia 185 drivers and it's not recognizing my monitor as a flat panel lcd but as a crt, also it won't set the correct refreshrate - either 60 or 75.. it's set at 50... since xorg 7.4 no longer uses a xorg.conf file.. i'm not sure how to go about manually adjusting the settings to ones that will actually work. i mean other than buying a separate graphics car (URL)
View 1 Replies
View Related
Jul 5, 2010
I have compiled the proprietary nvidia drivers for 11.3. When I boot, even using the nomodeset boot option, the nouveau module still loads, causing gdm/X to fail. I am able to manually remove the modules with rmmod and restart gdm. Everything then works normally. I have added the line "blacklist nouveau" to both 50-blacklist.conf and 99-local.conf in /etc/modprobe.d
View 7 Replies
View Related
Oct 6, 2010
After installation of 11.3 I had intermittent hangs and blurred icons.
"My Computer" told me I had a Nvidia GeForce 9100 and a driver called "gallium". That was the problem.
I added "ftp://download.nvidia.com/opensuse/11.3" to my repository and found a new driver to install. That solved my problems. Now my systems are rock solid.
View 9 Replies
View Related
Jul 21, 2011
My install of 11.4 (& 12.1) won't load unless I add the X11failsafe option to the loading of 11.4 (& 12.1) in the Grub menu.lst file. They bomb out after resetting the video when booting. I don't need to do this with my 11.3 install. Upon closer inspection 11.3 is using the nouveau nVidia driver, whereas both 11.4 & 12.1 are using the fbdev nVidia driver. My Hardware is a GEForce 6150SE and a Samsung SyncMaster 933SN. I have a couple of questions
1) What do I lose by adding the X11failsafe option in Menu.lst?
2) Can I, should I, replace the fbdev driver with something else. If yes, What? Nouveau?
View 2 Replies
View Related
Jan 11, 2010
I have a Compaq Presario CQ60 laptop with an Nvidia 8200M graphics card. When I try to enable visual effects I am asked to install the Nvidia restricted driver. When I do this and reboot, I get 6 copies of the Ubuntu screen on my display. Does anyone know what is causing this? I'm not sure which version it installed, I assume either 173 or 185. I have downloaded version 190 from the Nvidia web site. Should I install that version? If so, it is a .run file, how do I install it?Also, how do I reinstall the old driver. I fixed the problem this time by reinstalling Ubuntu, but that will get old if I have to do it too often.
View 4 Replies
View Related
Mar 7, 2010
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
View 16 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jan 1, 2010
I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
View 8 Replies
View Related
Jun 9, 2010
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Dec 12, 2010
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies
View Related
May 5, 2011
I am trying to solve multiple issues with my 64x natty install using gnome3 ppa( official ppa from gnome3). I have this setup on two machines, one is a fresh install the other is a upgrade. They both have most of these issues. Here they are: 1) Nautilus will not launch from the favorites bar. It does launch from a shortcut on the desktop. It will not run from the terminal unless I am root. 2) Number lock is disabled at startup (enabled in my bios). I used to be able to enable after nattty had started, I no longer can, though num lock light is lit - number keypad does not work!
3) I have set gnome3 set to let nautilus draw the background and desktop, I get a white screen at boot until Nautilus is launched then I get a background and some desktop icons(no computer or network icons). If I plug in a usb drive the icon appears on my desktop, when I select it I loose the background and have to select it again.
4) Wireless randomly will drop the connection, have to reconnect, sometimes it will, sometimes I have to reboot. I have Fedora installed on a 2nd hard drive on the machine with a clean install and the only similarity is it displays the default desktop until I launch Nautilus, then my background and desktop are displayed with all of the icons. From there on out Fedora has none of these issues. I have used Ubuntu Gnome and XFCE as my only os since 6.0 and have never had this many problems. Both machines would not run the gdm because of Nvidia issues after the upgrade and clean install. I DO NOT want to give up on Ubuntu as I tell all my friends and family to use it.
View 2 Replies
View Related
May 28, 2010
The problem is that Ubuntu 10.04 as delivered is not compatible with the Nvidia driver installed with 10.04. This problem is widely reported, as is a fix for it. The usual form of the fix is as follows:
To fix the above error message use the following procedure
1) Download Newest Nvidia drivers from here
2) Open module blacklist as admin gksudo gedit /etc/modprobe.d/blacklist.conf
[code]...
View 1 Replies
View Related
Sep 2, 2010
I have a Asus UL80j, Nvidia GeForce 310m w/ 1gb mem, i3 core processor and 4 gb ram. Windows 7 HP came on, I love Fedora so I dual boot. I installed the Fedora 13, did yum update all is good. I attempt to use the compiz for cool effects however, it freezes my system.
I attempt to install the nvidia graphics driver from thread [url] and follow the instructions to perform the install and reboot.
First it loads the fedora logo like always and then boom, black screen with a blinking white underscore mocking me. Reboot once more and get the load out of pass/fails and see nvidia.ko for kernel...... [NOT FOUND] blah blah [FAIL] blah blah [FAIL]
View 3 Replies
View Related
