I can't seem to install the opensuse in my computer. Are there any requirements that needs to be met? I have a intel pentium 4 with a 40Gb of harddisk(IDE version) and 1Gb ram ddr 1.
View 6 Replies
At the moment I've got dual-bootable machine with WinXP (25GB on hard disk) and openSUSE 11.2 (20GB on hard disk). After saving the important files on my ~/home I want to wipe off all data from both my partitions and then install WinXP (with 15GB) and openSUSE 11.2 with 30GB. The problem is I'm not sure how to go about doing this? I'm guessing the problem will be the boot process. I installed openSUSE on a machine that already had WinXP and I didn't change any boot settings so it must still be controlled by XP. So presumably I'd have to:
1. Remove openSUSE first and then remove XP using the XP CD.
2. Install XP again
3. Install openSUSE on another partition as I did before but with different partition sizes.
Or should I install openSUSE first before XP? I think I'm more confident on installing XP first since I've already done it earlier. The only other complication is that this is my 'laptop' screen is broken so I use an external monitor. This is what prevented me from formatting my computer earlier.
Thanks.
i have recently put opensuse 11.2 into a computer with XP on it. I held out on GRUB, but now i need it. I was wondering in this will interfere with my XP update.
View 3 Replies View Relatedit's as the title sayes i can sftp into the ip address ok but if I put the computor name instead I get return
Code:
ssh: Could not resolve hostname server: Name or service not known Couldn't read packet: Connection reset by peer hopesome1 knows a round this
I have netbook and i have been trying to install OpenSUSE from USB
the thing is installing from USB with Mint, I could install.
I have been using FUSB, liveusb-creator3.9.2, unetbootin and Univeral-USB-Installer-v1.7.2
is there any other way to install OpenSUSE onto my Netbook which does not have CD/DVD-rom?
After installing win7 I've lost the grub menu. I tried live cd and reset it. Bu I couldn' t. When I write find /boot/grub/menu. it's write (hd0,1). how can I reset the grub menu?
View 1 Replies View RelatedI have an older Dell Inspiron 7500 laptop w/
Intel Pentium III
512 MB RAM
3.8 gig memory free
Will opensuse 11.2 gnome work on this computer? I don't need to use compiz or fancy stuff.
I have a laptop that runs openSUSE 11.2, KDE 4.3.*. I've connected an external monitor to this laptop. The problem is my laptop screen is broke and I want Linux to use my external monitor as the master output. When ever I boot it's always the laptop screen that's taken as the master and my external monitor always have the resolution of the laptop. What I want to do is disable the laptop screen and change the resolution of my external monitor when the computer boots. The following commands seem to do what I want
[code]...
I'm relevant with linux but I don't know how to make it so that when the computer boots up it asks me to login. Right now it just logs my user in.
View 3 Replies View RelatedBrand-new to Linux. Using a computer with openSUSE 11.3 (64-bit) freshly installed. Install went flawlessly without any kind of error messages.
Hardware used: MSI X58 Eclipse, Intel i7-920, 6 GB memory, Seagate 500 GB SATA.
openSUSE is the only OS installed.
After the install is finished, all programs work fine. HOWEVER when I try to shut down/restart the computer nothing happens! I basically have to use the power off button to shut down...
I want to do an apparently simple task but since I migrated to Opensuse I found no way to do it. I have an enhanced install of Opensuse 11.3, where I added softwares from different sources according to my needs. Now that it's working fine I would like to make the same kind of install for two friends of mine and for a virtual machine on Virtualbox. In Ubuntu I used remastersys and in few minutes it created a live DVD with all the content of my system, and all of this offline, without downloading anything else. In Opensuse the only resources that most resemble that are Kiwi and Suse Studio.
But it seems that in both the softwares must be downloaded from repositories online. That would not work for me because it would take a very long time to find out all the packages I installed, from what repositories and my internet connection is very slow so I could not do it all at once. I tried Clonezilla but I was not able to restore the content of my Opensuse partition to a different machine. It gave me error messages, didn't make the restore and I didn't find a solution anywhere online. How can I transfer the content of my Opensuse installation to another computer without having to use online resources?
recently I installed opensuse 11.4 in my Dell optiplex 790 desktop. everything works well. however, when I tried to restart or shutdown my computer . the computer logoff and then "freeze" at opensuse window. I have to turn off the power button forcely and turn on the computer again.
My computer configuration:
DELL Optiplex 790
Intel i5 3.1G with HD intel graphic card
Bios revision A05
Memory 8G
When my computer is going down for hibernation (ram2disk) he safes the session corretly to the disk and the statusbar reaches 100%, but the computer and screen leaves on. Maybe some acpi troubles?
It is just that the computer won't switch off so that I have to press the OnButton 3sec. When I start again the session is sucessfully restored.
I have managed to install SUSE 11.1 linux on an old ACER laptop. Everything works great unless I use the automatic install update tool. As soon as I do this the computer refuses to boot, it just gets stuck even on safe boot. What is going on ?
View 3 Replies View RelatedWell, in first place let me tell you that my HDD boot sector or i dont know what is damaged, so to boot i made a boot usb with the grubdos utility, so anytime i want to boot in win7 i have to plug my usb and select win7 from it.Today i finished downloading the opensuse iso, then i mounted the image with poweriso and initialized the install, and it asked me to restart my computer, after that when i boot from my usb pendrive it goes directly to the opensuse install, but it just showme the blackscreen and nothing happens.
View 8 Replies View RelatedIt is my first try getting Linux on my pc which is an Acer Aspire Z5610. This is not the first time for me when I am getting an Kernel Panic error on this computer.
I looked up google hoping to find an answer and I found out that it may be my BIOS's fault. I currently have Windows 7 on this PC. I have a Phoenix BIOS and there is an update for it called "Bios Linux" on the official Acer support website.
OK, after this short introduction, that's the error:
I really hope to get support for this problem as I can not literally install any other OS to this PC than Windows 7 because they fail with Kernel Panic.
Tried other Linux Editions and even Mac OS Intel Edition and IAtkos V1 and V7 and they all give kernel panic.
In my computer I already installed Windows7 and Ubuntu.
when I start my computer then my computer want which OS I want to start with.
Now I'm want to install opensuse in my computer. But I want to know is it possible to run all 3 OS in my computer and when I start my computer it will ask that which OS now want to boot
1) Windows7
2) Opensuse
3) Ubuntu
I will enter my choice and If I enter choice 2 then I will work on "Opensuse" if I enter choice 3 then I will work on "Ubuntu" if I enter choice 1 then I will work on "Windows7"
The desktop computer stores most of our family's files and is mostly powered on, installed with Debian/openSUSE (KDE4).
We have 2 more portable (also Linux, KDE4) computers and frequently need to access files stored in the desktop. Currently file transferred is by usb thumbdrive which is troublesome.
The computers are all connected to a wireless router that provides access to the internet.
Reading/goolging and understand that there are many ways to share files to the extend that I am lost - Samba, NFS, SSH .....
My problem is to find out: What is the best way to access computers within the local network? "Best" here means:
- Secure
- Relative ease to setup
- Easy to use, file access with GUI (file manager?) as the entire family is using the computers.
I got this weird kernel panic in a brand new computer that my friend bought a few days ago.
The hardware specs are:
- AMD Athlon II X3
- 4 GB RAM
- SATA HDD and DVD
- Motherboard: MSI K9N6PGM2
Whats happening? I have installed openSUSE in a lot of machines and this is the first time that i got this.
Tried with a lot of media that i have here, LiveCD's, various DVD's and nothing.
I am running OpenSUSE 11.3 GNOME, and I recently reinstalled Windows, and it overwrote GRUB. I only have an Ubuntu LiveCD (I installed with the OpenSUSE DVD), how do I get GRUB back? Note that the Ubuntu LiveCD doesn't recognize the LVM Encrypted partition, so I can't mount it.
View 2 Replies View RelatedI've recently begun using PING (Partimage is not Ghost) imaging software, and it works great with other Linux distros. Upon my first use on openSUSE, I found that I could not restore the image onto another computer. After a successful restoration of the image, I get: "Could not find /dev/mapper/isw_ddedgibjfd_ARRAY_part2 Want to fall back to /dev/mapper/isw_ddedgibjfd_ARRAY_part2? (Y/n)" during the first boot. I don't know what to do, I've tried taking multiple images, and restoring them on multiple computers, but I always get the same error.
View 7 Replies View RelatedI have installed suse 11.3 on a USB drive and can boot from it successfully. The install was done using my desktop computer. I then booted my netbook using the usb drive, linux loads and runs fine, however when i need to enter the password to make any changes it will not accept it. I can not even access the hard disk in the netbook. I rebooted using the desktop just to check that the password I was using was correct and it worked fine.
USB drive is a 250GB western digital with only linux on it
Desktop is running Windows XP service pack 3, 4GB RAM
Netbook is running Windows 7 Starter 2GB RAM.
i installed kde to my usb drive but i think the grub also went to it because im running windows 7 and now kde but would like to know how to uninstall it if i ever have to. and also i cannot boot my computer unless that specific usb is connected
View 6 Replies View RelatedI just used the on-line update to upgrade from 11.3 to 11.4. Now when I click the computer button in lower left, there are no entries under system, ie. control center, yast, install, lock, logout, shutdown. How do I get those back?
View 9 Replies View RelatedI don't know that this post fits here, nor does it fit in "Applications." installing suse doesn't seem to give you the chance to name your computer. Now my computer is called "linux-0qvi" or something strange like that. I want to name my computer. Can I do this now without screwing things up??
Also, during install, there didn't seem to be an opportunity to make a separate root password. My first (and main user) account is now set up with admin rights, so I have to type in my account password every time I do something as root. Can I set a separate dedicated root password without screwing up my system?
My wifes computor crashed during an update with a message to fill in a report. It would not respond to any key presses. The computor has been running 11.3 since it was realeased without problems other than jerky video. The computor will not boot it asks for the password but does not accept it, Although I can see the Home folder it does not mount. I have tried testdisk but although it sees the partions it cannot acess them.
View 5 Replies View Relatedafter i have installed suse 11.4 on my acer m1300 my computer (desktop) won't auto boot. if i boot it manually my computer freezes. only if i boot it in revovery mode it continues with automatic confiration and it installs suse. but even than it won't reboot and i have to shutdown the hard way. when i restart the computer freezes and won't open opensuse.
View 9 Replies View RelatedIam tring to install 11.4 on my new computer, when i start the computer the green screen pops up and syslinux starts. However when it finishes loading a dialog box pops up saying "Make sure that cd number 1 is in your drive" . Obviously it it is,
because i am booting from the dvd. I dropped to the shell where i saw this message "Inappropriate ioct1 for device". What does all this mean.
so here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
i started the installation programme and it went through a couple of options then says it has to restart the laptop when i restarted i got this message before the bios screen and then the computer does nothing
" Booting GRLDR.....
Turning on gate a 20 .... Success
Srating cmain() .... _"
