OpenSUSE Multimedia :: Setting Sansa MTP Player To Show As Media Device?
Jun 1, 2011
I'm using OpenSUSE-11.4+KDE and have not been able to access my Sansa Express drive. I can pull it up part way, but it acts as read only. I'm not sure what settings I may need to make in the Partitioner to fix this.If I boot into a LiveCD of LinuxMint10-KDE and plug it in it is instantly identified as a "Media Device," and I have access into the MTP section of it I believe.
I prefer using Banshee, but will use Dolphin to manual drop files it I can get the Sansa drive to operate as with Read+Write. I've seen this device listed here at "plug and play" [URL]../HCL:Gadgets#Media_Players
View 2 Replies
ADVERTISEMENT
May 9, 2011
I am trying to set my default media player as MPlayer and selecting it with a right click in the menu, open with and then telling it to open with every time. It then opens it in MPlayer that time no problem but then next time I just double click on the file (or any file with same type) it just opens it with the original default player. I've tried using SMplayer as well as default and it does the same thing. I'm on Ubuntu 10.04.
View 3 Replies
View Related
May 26, 2011
in software.opensuse.org site if we serch for a software the result will be like the following
vlc
KDE:Unstablelayground/openSUSE_11.4_KDE_Distro_Factory This is the stripped version of the VLC media Player. VLC media player is a highly portable multimedia player for various audio and video
[more]
1-Click Install
Manual Package Download
Go to OBS Project
i586 vlc-1.1.6.99-1.11.i586.rpm
src vlc-1.1.6.99-1.11.src.rpm
x86_64 vlc-1.1.6.99-1.11.x86_64.rpm
if i like to keep the setup(rpm) of the software which i should chose the above?
View 9 Replies
View Related
Jan 2, 2011
Hardware: Sandisk Sansa m260
Software: 2.2.5A
When I copy files over ( from a PC running Ubuntu 10.10 ) to my Sansa m260 each track is listed multiple times. When I look at the contents with my file explorer on my PC I see only one copy of each track.
I tried deleting all files and starting over again on a fresh battery.
View 1 Replies
View Related
Apr 14, 2011
Ubuntu 10.04 won't recognise my Sandisk Sansa Clip+ as installed on comp. It sees memory sticks and memory cards. Are there drivers that I need to install?? Anything in Synaptic Package Manager that needs to be installed?
View 4 Replies
View Related
Jul 11, 2011
I've no sound in any media player (vlc mplayer, flash in firefox etc)
I installed my media codecs the "hard way" i.e. Multi-media and Restricted Format Installation Guide
Don't recall anything going amiss with that
Sound works in Yast when doing the sound check. The OpenSuse boot dingle sounds fine. Just nothing in the music players
I used MMcheck script mentioned in this post
Multi-media and Restricted Format Installation Guide
View 4 Replies
View Related
Jan 31, 2010
I'm struggling to find a way to sync my media player (Sony W995 - it just appears as a disk when plugged in, so it should be OK I think). I can kind of get something working by adding the mount point as a 'Local Music' folder. The problem is, there doesn't seem to be a way of 'syncing' to Local folders. Further more, my music collection is in FLAC format on my PC - but I need to transcode it to mp3 when syncing with my media player. Is this possible? I don't expect to be syncing the other way at all.
Otherwise, I'm stuck with manually transcoding/copying files with Dolphin
View 3 Replies
View Related
May 31, 2010
Trying to use banshee to import music into Creative zen mp3 players but a pop up says 'import to library is not implemented for MTP devices yet'. Anyone know how to fix this?
View 9 Replies
View Related
Aug 11, 2010
I was unable to play windows media player content from WEB using Firefox. Firefox is asking to install missing plug-ins. But when I click on "install missing plug-in" button, its showing "No plug-ins found". In windows its played by windows Media player plug-in.
View 3 Replies
View Related
Mar 24, 2011
As most do now my local library has a decent catalog of audiobooks, which I would like to be able to listen to on my iPod. These books can be downloaded only by using Overdrive Media Console (which is available only for Windows and Mac, and also requires Windows Media Player to work!) and iTunes if you want to transfer to an iPod.
I've searched around for Linux friendly solutions. They fall into two categories, try Wine/virtual machine/dual boot to run the required software, or give up. But pretty much everything I have found is about four years old now. Has anything changed in the last few years, or is this still pretty much the way things are? At the moment I use my girlfriend's Vista computer to download books, but I would like to be as Windows free as possible, and able to do it on my own computer.
Can anyone offer advice for being able to download audiobooks and put them on an iPod, with a minimum of non-Linux software? Relatedly, I would also be quite happy to replace the iPod firmware with Rockbox, but from what I can tell that would make library audiobooks even less accessible (so asking if this is an option is like asking for $10 after being refused $1).
View 3 Replies
View Related
Apr 13, 2010
I recently installed VLC Media Player and now wonder how I could make it my default media player in Ubuntu because every time I want to listen to a song, I have to right click and "Open With...VLC Media Player".
View 2 Replies
View Related
Apr 13, 2011
Ubuntu10.10.i want a media player with all media codecs.it should able to play all formats of videos and audios so please suggest me a media player.(i used km player in windows i want a media player like that)
View 1 Replies
View Related
Aug 9, 2010
I have two soundcards on f13, latest kern. I want a media player that lets me choose out device, while the system uses its own, a la mpc-homecinema on Win7
View 4 Replies
View Related
Oct 20, 2010
Crystal Player has one very good playback speed troubleshooting feature - it uses large buffer of decoded frames (about 50% of RAM). Is there any player with such features in ubuntu?
View 4 Replies
View Related
Aug 1, 2011
When playing coyright protected DVD's in Ubuntu 10.10: the following errors occur:Movie Player Error message:Error occured Could not read from resourceVLC media Player Error essage:Playback failure:DVDRead could not read block 0.Non copyright protected DVD's play fine
View 2 Replies
View Related
Mar 4, 2011
I have an ipod classic 160gb, that I sync with my machine at home.
I use Linux at work, and want to just plug my ipod and just listen to the tracks, with all the playlists and such. I don't want to sync nothing, I just want to listen to the tracks as if I was using the ipod itself.
Why? Because this way I can use the usb port.
So, I don't want to manage my ipod in Linux, I just want to listen to the tracks on it in Linux, like it was a local library but it's instead in my ipod.
(I've tried gtkpod, it works to show my files, but I can't play, shuffle, etc. It would be interesting to have a complete audio software to handle everything like it was a local library)
View 2 Replies
View Related
Jun 11, 2011
Kernel 2.6.21.5, Slackware 12.0 When I click on some audio stream links in my web browser (Mozilla Firefox), the stream comes in a URL ending in .pls, usually listen.pls. As I want mplayer to play it and not the default player, I intend to make the first the default one. In Firefox (2.0.0.4) I can do Edit>Preferences>Content>File Types>Manage and change the actions associated with each file type. However, if the type is, say, PDF, I can can only change the action if a PDF file has anytime been downloaded. So, the same goes for a PLS file.
You have an example of the kind of link I talk about here: [URL] In the case of a radio broadcast audio stream, I am not downloading it, I think. At least, the Download window does not open. The Download window not having open itsef, the PLS type does not appear in the window Edit>...>File Types>Manage leads to. And so, I cannot change the action. The action would be 'Open them with this application': mplayer.
View 2 Replies
View Related
Aug 27, 2010
Iam using opensuse 11.1. I want to know which is the best player that can be used in suse, which should support all codecs. I have tried totem player, xine, kaffeine, Noautun etc. But none of them is good. I have tried to install vlc player, but it shows a lot of dependencies too..it was not successful.
View 2 Replies
View Related
Aug 27, 2010
I can not get my desktop running Ubuntu 9.10 to recognize my SANSA clip music player. When I plug it in (nothing), No icon on desktop, nothing in Nautilus. I've verified the USB ports are working by plugging in thumb drives and my I-pod.
When I hook the SANSA to my wife's laptop running Ubuntu 8.04 it works great no problems. I must have a setting wrong on my computer, but have NO idea how to fix it.
View 2 Replies
View Related
Jul 25, 2011
Is there a way to get removable media to automount to the /media folder when the "show desktop" option in nautilus is not checked?
View 1 Replies
View Related
Apr 19, 2011
Since I can't get LinuxMCE diskless mds to work I am going to try and use another approach. What I want to do is be able to store media (pics, audio, ripped dvds) on a central server and access the across the network with a media player in Ubuntu or Kubuntu that I can connect to the TV and entertainment system.
What media player to use and how I should set that up? I might use windows server for the shares just because I am used to it unless theres a better way. I have a pretty beefy server just waiting for media files.
View 2 Replies
View Related
Feb 26, 2011
It seems to me that there is a media player that can play .iso files. which one or ones do this so that I don't have to install the dozen or so that are in the repositories.
View 5 Replies
View Related
May 14, 2010
I have just upgraded my ubuntu dist from 9.10 to 10.04 via the Update Manager inside gnome. I spend a lot of my spare time lying in bed watching (legal) movies using VLC Media Player. I have never before the dist upgrade had any issues with this although since the upgrade I have found the VIDEO in the movie crashes usually around halfway through the movie although the audio remains fine and continues through to the end of the movie.
View 2 Replies
View Related
Jun 4, 2010
I am trying to stream a live dvb feed to windows media player on a number of desktops. I have VLC and all the codecs etc installed.
I am starting my stream with the following command:
Code:
After vlc loads, I get the following error:
Code:
It seems your FFMPEG (libavcodec) installation lacks the following encoder: MPEG Audio layer 1/2/3.
If you don't know how to fix this, ask for support from your distribution.
This is not an error inside VLC media player. Do not contact the VideoLAN project about this issue. After some searching around, I found a guide on setting up ffmpeg at [url] which I have followed. I am still getting the error.
Do I need to add any other codecs to make this work?
View 4 Replies
View Related
Aug 22, 2010
Unfortunately, being the fact that I'm a gamer; I need to dual boot with Windows 7. I'm after a nice music player with a similar GUI to Banshee or Rhythmbox in their minimalism. Something as Gnome looking as possible and very lightweight on recources.
View 2 Replies
View Related
Oct 12, 2010
Ubuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies
View Related
Jan 1, 2010
Okay running on 64bit karmic 9.10 i have been trying to get this .ts file to play nicely on vlc, but no success of getting it work nicely what so ever. It actually starts under VLC and gives image and sound but not the way i would prefer it. I don't quite get it but when i start it with vlc it actually displays it with lower resolution this is HD file, as its a stream capture from tv but it outputs it with much smaller resolution about 320 x 180. Tried it with other players too but the only one that accepted it nicely was xine "but problems ahead again" it outputs no sound? the image though was and is what it should be.
Tried it with Totem too and it did accept it too actually "hurray! but with the same symptoms as VLC + it doesn't output any sound out from the file only the image is what gets generated out from the player. I ran VLC from the terminal and it outputs following data when i start to play the file:
[Code]...
so if any ONE knows what should i do, feel free to step up and advise me would be appreciated (thanks in advance) If this has value if's mpeg2 ts file. And no...the file ain't corrupted that much i know, but what could generate this problem. If it ain't broken? Seeking works nice etc... except the low resolution display.
View 2 Replies
View Related
Mar 7, 2010
I was setting up my Totem Movie Player on Ubuntu 9.10 and at first it wouldn't play dvds at all. So, I went online and entered these two commands into the terminal to play restricted dvds.
sudo apt-get install libdvdread4
sudo /usr/share/doc/libdvdread4/install-css.sh
DVDs will now play on Totem, but now I don't have any video. I can hear sound and if click around the screen I can get it to play but I still don't have any video. I also tried both dvd drives on my computer and tried different DVDs. Still same thing.
View 4 Replies
View Related
Apr 18, 2010
how to install the drivers for media player etc in ubuntu and give me any download link...??
View 2 Replies
View Related
Apr 29, 2010
I have a file server running Ubuntu Server. No monitor or input hooked up...I just ssh into it for maintanance. I use it to store all of my music and video files. I was watching Hulu at work today and thought it would be nice if I could somehow stream or play my files from my file server while I was at work.
I have apache set up so I can serve websites from it so I was thinking if I could some how select the file to play and it play it in an embedded player, that would be fine. I'd like it to play music and videos.
Is there any way of going about this? I have minimal HTML experience, but I have extensive C/C++ experience and server experience. So I'm comfortable using some open source libraries to accomplish this.
View 1 Replies
View Related
