I'm currently using the default, open-source drivers. I'm aware that the ATI proprietary drivers have been released as a pre-release DL. How do I go about installing it? Is there a process I need to stick to? [URL]...
View 6 RepliesI have been trying to install fglrx drivers for my ATI card with Debian testing (x86) but without any luck. I have tried what it says here http://wiki.debian.org/ATIProprietary but I only come up with a blank screen (and also invoke-rc.d gdm stop does not work either?) I have also followed the directions at [URL]....html and that doesn't work either (make error 127). I must be doing something totally wrong.
View 6 Replies View RelatedI've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code:
~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4300 Series
OpenGL version string: 3.3.10151 Compatibility Profile Context
Shows fglrx works OK, as well as overall performance is pretty good.
I've done
Code:
aticonfig --initial
radeon drivers is also blacklisted
but running (if it means something)
Code:
# depmod -a; lsmod | grep radeon
radeon 868858 0
ttm 64561 1 radeon
drm_kms_helper 32944 1 radeon
drm 221516 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 6728 1 radeon
It's been a while since I last used the fglrx drivers, especially on my laptop which has an AMD RS690 based video adapter. While the Open Source drivers get the job done most of the time, and especially with Compiz-Fusion (yay!) these drivers still lack much optimization and since they don't intend to optimize the OpenGL stack for the current drivers and instead they'll work on it for the Gallium3D drivers, the situation is not going to get much better any time soon. However the Free drivers have gotten very robust and with very good support all in all.At first I used the fglrx drivers, but went with the Open Drivers for two main reasons:Radeon drivers were the first to get true KMS support, so they fully supported Plymouth.
Fgrlx drivers had (or still have?) a hideous bug in that they would cause screen flicker and tearing all over the place if you had a composited desktop. Wasn't as bad with Metacity's Composer Manager compared to Compiz, but still very annoying. Also they didn't properly had (or still have) RandR 1.2 support which means that if you attach a secondary display, you can't configure it as a different screen at a different resolution (for instance, main laptop display running at native 1280x800 and the secondary screen, like a projector, running at 1024x768), which the Open drivers get most of the time (note this isn't perfect in the open drivers either).
So i wanted to give the fglrx drivers a whirl once again and see how do they run... However I do not fully remember the steps involved in getting Plymouth running with the VGA/VESA console driver and the fglrx drivers (all I can remember is that it involved rebuilding the initrd [which in F12 is initramfs] to leave out the Radeon driver and you could still use the vga=[mode] argument to get Plymouth), the only other thing I can remember is that you had to run plymouth-set-default-theme to get the theme back. The main thing stopping me from going back to fglrx is that I'm not sure if all the composite issues have been resolved.
n OpenGL not working with fglrx drivers?
View 1 Replies View Relatedi'm using ubuntu 10.04 LTS and my GTK is amd radeon HD 6850. yesterday, i ran ubuntu 10.10 with the fglrx offic. drivers properly on my native resolution and with 3D acceleration, though i couldn't run my favorite game minecraft, so i tried to reinstall. by this, i accidentally formated my windows partition, so all i've got now are my live cd's and this installation of 9.10, where i downloaded the official drivers what didn't work, then upgraded to 10.04 LTS and can't remove the damn fglrx drivers. the error i get is: [URL]
how to get this working? i love ubuntu, i hate windows, it isn't an option for me to get back to windows, the only way i want to use it is for steam games [by the way, will there be steam for linux?] like cs:s, tf2, dow2, which i dont play that frequently as minecraft [i play this every day, on my fav server majncraft.cz]
I have an ATI Radeon 4200 HD Mobility, with 256 MB of my RAM dedicated to it. I installed FGLRX, but the performance actually dropped compared to the open source drivers that come installed by default. I removed fglrx, and reinstalled the Radeon packages, but no avail.
Now, when I boot, I get the error, "unable to load module 'fglrx'," and my only option is to run Ubuntu in Safe Graphics Mode. This tells me that the computer is still trying to load FGLRX, and there's something that needs to be altered down at the boot level.
I installed the fglrx drivers in Ubuntu Natty for a ATI Radeon HD 4350 graphics card. Although compiz seems to work better, everything seems to be a blurry as compared to the generic graphics or while under Windows 7.For example, every other line displayed here while I type is more blurry than the others.I have a dual screen setup.
View 2 Replies View RelatedI am running Debian 5.0.6 and trying to install an ATI FirePro V3750 graphics card. I am unable to compile the fglrx driver. if there is some way to manage to install the fglrx drivers.
cpus amd64 dual quads
motherboard tyan 2927
video ati V3750
kernel 2.6.26
headers and gcc fully installed.
Compiz is utterly unusable, ever since probably about 9.04 or 9.10, when Ubuntu took out the Catalyst drivers for my laptop w/ Mobility Radeon HD 2300 their less capable open-source variants, which crashes after about 15 minutes of use.
The screen gradually becomes less responsive for about 5 seconds, until it just completely freezes and becomes completely unresponsive to any keyboard or mouse commands. I tried using the RadeonHD drivers instead and the problem is still there. The 'Hardware Drivers' app in System > Administration doesn't seem to do detect any fglrx drivers for my system.
How would I get some working fglrx drivers back?
And I don't want to use Metacity anymore.
I can't get my fglrx drivers activated, every time I try I get an error message. I first tried going into System-->Administration-->Additional Drivers and activating it their but I get this error message: SystemError: installArchives() failed. I tried using some jockey command (my apologies as I can't quite remember the command) and I got the same error message. I was searching around on google and I someone said to type Code: aticonfig --initial Into a terminal and now my computer is running really slowly and I can't get it to run like normal. My windows scroll down in increments, when I try to move a window it jumps around, I can't handle how slowly this thing is going.
MOBO: Asus M4A87TD/USB3 CPU: AMD Athlon II x2 245 GPU: Radeon HD5770 RAM: Corsair VS2GB1333D3 2GB (1333MHz) DDR3 RAM, Non ECC Unbuffered, 9-9-9-24, 1.5V PSU: 600 watt shark HDD: West Gate 1TB 7200RPM SATA2 OS: Ubuntu 10.10
Today I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.
View 7 Replies View RelatedI recently switched over to Debian 8 "Jessie" (64-bit Cinnamon flavor) on my Desktop.
250GB SSD
16 GB DDR3 RAM
i7 4790 Processor
AMD Radeon R9 280X
I have been able to play multiple games on Steam without any issues, however I have downloaded Ark: Survival Evolved and am unable to actually play that game in particular. I can log in and get to a point of choosing a server, but after it actually loads to the game(where it starts rendering graphics), the game crashes to the desktop. Below is the readout of the crash from when I loaded Steam via Terminal.
Code: Select all
Signal 11 caught.
ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
[Code] ....
I have noticed that the above (zenity:13343): Gtk-WARNING line in terminal is the point at which the game crashes. It would appear that the steam gameoverlayrenderer.so is a separate issue and may be a common occurence in the background that you just don't see.(?)
Things that I have done thus far:
-Verified that the video card is good
-Tried Open-source graphics drivers
-Currently using the AMD 15.9 Proprietary Drivers directly from AMD with Catalyst Control Center.
-Reinstalled "zenity" to ensure that it was not corrupted.
-Verified which Gtk+ versions that I have installed(see below)
Code: Select all
lukasz@Lukasz-Desktop:~$ pkg-config --modversion gtk+-2.0 gtk+-3.0
2.24.25
3.14.5
Is there a "default" gtk+ version that I have to alter for it to recognize that I have Gtk+ 3.0 installed, or did I miss something somewhere?
My hypothesis:
-It has something to do with 32-bit/64-bit conflictions(Maybe the game? My steam is 64-bit)
-My graphics card may not be supported by Ark: Survival Evolved yet.
-I am missing some libraries each time I have attempted different video drivers.
-Something with steam did not get installed correctly(I have not attempted to uninstall and reinstall it, however other games function correctly)
Can I use the current FGLRX drivers with a Mobility Radon X2300 card on an HP6910p with Lucid?
View 2 Replies View RelatedI need support for adjusting over/underscan for my Mitsibushi WD-Y577 57" DLP HDTV (a breed between WD-57733 and WD-57734), because the open source ATI Radeon driver does not include it. When I attempt to install fglrx, here's what I'm getting:
apt-get install fglrx
Code:
Loading new fglrx-8.723.1 DKMS files...
First Installation: checking all kernels...
Building only for 2.6.33.5-rt23
[code]....
I have compiled 2.6.33.5 from source and patched it with 2.6.33.5-rt23. I have adjusted features take a lot of things off that I don't need. I need the real-time kernel for music creation using JACK (Jack Audio Control Kit).
Adjusting over/underscan requires an AMD Catalyst Control Center. Will there be future open-source ATI drivers that allow me to correct my display without having to change modelines in xorg? It will take a lot of trial and error to figure this out for my display. Note that even if I did install the kernel headers for 2.6.32-23-preempt or 2.6.33-23-realtime (depending on what I use), fglrx module will still fail to install, even if I install linux-source. I'm confused. I do want fglrx and I do need the real-time/low-latency kernel for music creation under Ubuntu 10.04.
Update: if you create a utsrelease.h header file inside /usr/include/linux directory, you can write out like this:
Code:
#define UTS_RELEASE "2.6.33.5-rc3" # replace the version number for your running kernel. You can then reinstall fglrx, but then I get this:
Code:
DKMS make.log for fglrx-8.723.1 for kernel 2.6.33.5-rt23 (x86_64)
Sun Jun 27 19:45:11 EDT 2010
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
[code]....
fglrx error - Can't install new updates
View 2 Replies View RelatedExcerpt of Xorg.0.log output:
[Code]....
September 20 2010? Is there a newer kernel module for fglrx? How can I get and install it?
I know i know, some will say "eww Proprietary Drivers" but hey, ubunt is all about having more control of the OS. Is there an easy way to install Proprietary Drivers thats not through the hardware drivers option on system?
View 2 Replies View RelatedI am trying to install xorg-driver-fglrx using apt--get but it return error which says btw i am using ubuntu8.10 Desktop distribution
Code:
root@VAIO:/home/miriyala# apt-get install xorg-driver-fglrx
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
I've just upgraded from ubuntu 9.10 to 10.04 64 bit, and everything went well except for the fglrx driver installation, which failed. I've checked the troubleshooting guide and tried to purge the drivers, with only partial success.
When i type dpkg -l '*fglrx*'
I get this,
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
[code]....
Cutting a long story short (my machine won't allow me to login without the proprietary fglrx driver installed), how do you install the fglrx driver in Natty, from the console? he following commands have been suggestedbut haven't worked:
Code:
apt-get update
apt-get install fglrx fglrx-amdcccle fglrx-dev
[code]....
I did a fresh install of openSUSE 11.2 32 bit today and installed all updates. I also installed the kernel sources and kernel symbols. Finally I installed the ATI drivers from http:///www2.ati.com/suse/11.2. The drivers didn't work after that, so I tried to run the 32 bit driver installer suitable for my gfx card (Radeon X800 XT PE -> v9.3), where I got the following error message:
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
which: no XFree86 in (/usr/lib/mpi/gcc/openmpi/bin:/home/schaeff/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin)
Error: ./default_policy.sh does not support version
[code]....
I had no such problems with openSUSE 11.1 32 bit. Is there a way to install the drivers on my system? If yes, how would I do it?
I recently upgraded to Lucid (x86_64) on an HP dv2 laptop, and after doing so, the system will not resume after a suspend (with fglrx installed from the "official" repositories). After reading a lot about the problem, I have seen that updating to the latest ATI driver had fixed this issue for some, so I would like to try that.
I am following the guide at at cchtml.
First, I tried installing the Ubuntu-X team's drivers. However, after (successfully) adding their repository, an update does not fetch their packages:
Code:
It looks like both the xorg-edgers and ubuntu-x-swat repositories are being ignored? (If I'm reading that correctly.) If I open the window System->Administration->Software Sources, I can see that the ubuntu-x-swat repository is checked, so I'm confused why it's being ignored.
If I try to demand the fglrx-installer package, I get an error that it cannot find this package.
Code:
I have the same issues for xorg-edgers and ubuntu-x-swat.
Finally, if I try to build the official ATI v10.7 drivers myself, I get an error that Linux is an unrecognized architecture!
Code:
I have installed all preliminary packages suggested in the guide:
Code:
I really can't understand why I'm unable to build the package from ATI myself.
I'm running 10.10 from an 8GB USB flash drive with persistence to see if I can get it working the way I need it before I can completely transition from Windows. I have an onboard ATI Radeon HD3300 running dual monitors which is on the list of supported devices for the FGLRX driver package, but I've encountered multiple issues.
First, when I chose to activate it from the Add'l Drivers dialog, it gave an error: "SystemError: installArchives() failed". I found a forum where someone had suggested opening the Terminal and giving the following commands:sudo aticonfig --initialfollowed bysudo rebootWhen my system rebooted, the Ubuntu screen showed "Ubuntu 10.10" in a plain font instead of the Ubuntu graphical logo, and then it quickly displays an error in a dark-colored font and then the screen flickers several times before stopping at a full-screen terminal. I have never used Linux before, so I don't know any commands at all or even what to do from here. I just want the dual screens to work and have the correct resolution.
Am I going to have to format and reload my flash drive again?
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
I'm running Debian Squeeze/current fine with the default kernel & ATi's Catalyset drivers. I'm struggling to get the display drivers to work with the bigmem kernel as I've got 4GB ram on my machine so might as well try to enable it.
I can have my system work with the normal Squeeze kernel by installing the normal kernel headers & then FGLRX drivers, but after additionally installing the bigmem kernel & headers (linux-image-2.6-686-bigmem & linux-headers-2.6-686-bigmem) I cannot get the system to reach X after removing & then re-installing the video drivers.
I recently installed Debian Squeeze on Acer Aspire 5542 , it has a Ati Radeon HD 4200 graphics card
I want to install the fglrx drivers , I apt-get install fglrx-driver, fglrx-glx & fglrx-control , The packages & dependencies download fine but when apt tries to install them the fglrx-modules-dkms fails .
The Kernel is 2.6.35.
after few years being limited with my pc configuration (windows OS) I realized that linux or it's distributions is the best invention in 21 century. And finally I am starting use it. openSUSE 11.4 installaition succesful, I updated it and it looks I don;t have any problems, but I got few questions.
1. How install older version of mozilla firefox internet browser here? I can't install some plugins because it's a firefox beta 12 version, for example. I am quake fan, o I like play quake live, but i can't install quake plugin, because my firefox is beta version.
2. Does I got all drivers instantly installed to my mashine? ATI video drivers, sound drivers ect??
3. Are there any How-To guides which can teach me, how I can improve my desktop? gadgets, 3D desktop ect...?
I verify in Intel site that my Intel'drivers are outdated, because Dell Suport is slow, so how do I update them in Opensuse?
Do I use Virtual Machine or try through Wine?