I was running 11.0 and it stalled in the middle of a number of updates. On reboot I now get (if I remember correctly) Error 15: File not found.I managed to get my hands on a 11.0 live cd and started trying to fix grub. However, when I try mounting the harddrive using "mount /dev/sda1" I got
Code:
can`t find sda1 in /etc/fstab or /etc/mtab
"mount /dev/sda1 /mnt" gives
[code]...
After upgrading from opensuse 11.1 to 11.2 I get the following error messages while booting the system caused by the initial filesystem check routines:
ERROR: Couldn't open /dev/null (Too many open files)
ext2fs_check_if_mount: Too many open files while determining whether ... is mounted.
fsck.ext3: Too many open files while trying to open ...
I found a new version of the e2fsprogs at the OBS package claiming to fix this problem. But installing this new version did not solve my problem.
Here some information about the affected system:
Operating System:openSUSE 11.2 (i586)
Installed e2fsprogs:e2fsprogs-1.41.11-4.1.i586
Number of LVs:35 (all ext3)
I can only boot if I comment out some of the filesystems in my /etc/fstab. It seems that the number of filesystems must be less or equal 32.
I am trying to boot up linux on a SATA drive. The SATA drive already had some other linux. I 'fdisk' the SATA drive and cleared all partitions. Now tried to CD boot with linux, it copied over to the SATA drive, however, when i tried to boot from harddrive, it gave me a GRUB Error 22. Why does this happen ? Shouldnt the linux have created its own partition ?
View 3 Replies View RelatedToday for strange reason, one of my Ubuntu 64 bit server Linux VM failed to start ? it stopped in the FSCK scan status with the error as attached. few days back I've added new hard disk successfully and format it as sdb5 without problem.
View 3 Replies View RelatedI want to install Fedora 15 on my new computer. It has 1 new 3TB hard drive. I know I need a GPT to use all the space. Does Fedora15 installer support setting up this drive to boot from GPT?
Will there be any issues if I try to load windows 7 on another partition after I install fedora?
Yes my motherboard has UEFI.
i noticed that my 2 internal harddrives are mounted within the system (i can see them with DF) but they do not show up with Dolphin (running KDE Suse 11.3).Now i added them manually. Might be that a bug or did i something wrong at installation?
View 4 Replies View RelatedI installed Mac OS X 10.6, Windows 7 Ultimate, and made 4 partitions.OSX and 7 installed fine, but when I tried to install SUSE, it stopped at 92%.I get this error:
Code:
grub>setup --stage2=/boot/grub/stage2 --force-lba (hd0,3) (hd0,3)
Error 17: Cannot mount selected partition
grub> quit
i would like to link a folder, in my case that is 'Pictures' to a different harddrive with a folder containing pictures. So whenever i save pictures it would save by default onto the harddrive with the linked folder. How can i do that. I tried to do it with ls i think but this makes softlinks which did not let me open automatically open the other folder. omg i hope i don't make it to complicated to understand.
So here a visual plan of it.
the default folder
/
/home/user/pictures
like to link it to
/media/pictures/photoshots
so this is the harddrive (another internal harddrive) which contains a different folder where i store my photos in general.
I want to install latest version from DVD onto my second harddrive. I tried it myself yesterday but ended up with a bootloader I didn't want, and some alterations on my windows 7 disk. It took me a while to restore the windows bootloader and I don't want to do it again. how to proceed to install a fresh copy on opensuse/kde on my second harddrive without it touching my first (I can select bootdevice from bios function). Both are currently formatted as NTFS and the second (target) drive is empty.
View 9 Replies View RelatedA while back when 11.0 was recent i upgraded my computer to an hp pavilion desktop which only had SATA which wasn't compatible with my 500gb IDE hard disk. I then decided to buy a compatible hd (500 gb as well) and use an external hard drive case to put my old one into(which plugs into the USB ports) i currently have the external 500 gb partitioned with a linux native mounted at /home, and my other with NTFS and linux native mounted at /
Prior to updating to 11.2:I could power on my external hd(Thermaltake A2396) after grub and it would boot up no problem. if i turned it on too late or before grub was done it wouldn't load and i would have to log in as root in repair mode, turn the hd off then back on, wait for a couple of lines to pass(I assume the drive being detected) then mount /home, and init 5This didnt really bother me for the previous versions of suse much because i just had to remember to turn on the drive After updating to 11.2:the only way to boot is to wait, do the power on/off, mount /home, and init 5this gets to be quite annoying after a while and i was wondering if anyone knew a way to get it to mount itself while its booting. let me know if you'd like me to post any more info
I was running openSUSE 11.2 on a Dell Studio with a mirrored disk. The upgrade to 11.3 went well it seemed until it got to the point of installing the new bootloader. Then it couldn't mount /boot. Otherwise it seemed to go OK though.It completed and rebooted. I see a very brief flash of the word GRUB on the reboot, but then the screen blanks and I get the BIOS messages again.How can I now install GRUB so that I can boot. I had a similar issue with 11.2 in the past, and was able to repair GRUB using 11.2's DVD's "Repair Installation" which had tools to reinstall GRUB.11.3's DVD is missing this option.I'd prefer not to do a fresh install as then I will have a lot of OS setup to repeat (Samba, Apache, Trac, etc.....)
View 9 Replies View RelatedI am looking for a solution to administer my remote server running SUSE LINUX 10.1 (X86-64) - Kernel 2.6.16.13-4-smp. I have made changes to server and is able to see the boot process and also able to login to system through serial console.
My question, will I be able to administer the server through serial console incase if my root partition is corrupted and system has gone to maintenance shell(or root shell).
Also is there way to go directly to maintenance shell from grub(not talking about single user mode). I want to go maintenance shell where / partition is not mounted.
My openSUSE 11.2 system has periodic running of fsck disabled for ext4 filesystems (Maximum mount count = -1, Check interval = 0). What is the reason for this? Is it because fsck is not necessary on a periodic basis with ext4, and only necessary when errors are detected? Or is it because fsck has problems working on ext4 filesystems?
The ext3 filesystems do have it set (Maximum mount count = 500, Check interval = 5184000 (2 months)). I would like to know why fsck is not set to be activated for ext4.
i have an external harddrive which i encrypted scince opensuse 10.2 with luks. Now i installed opensuse 11.2 its impossible to me to mount this drive correctly.
the harddrive was recocnized in my former opensuse 11.0 correctly as luks encrypted and during installation yast installed the kernel module and encrypted the harddrive so that i regulay could mount it on boot by giving the password for that harddrive. Scince opensuse 11.2 however yast thinks this is an dmcrypted partitoon and tries to unlock the harddrive using dmcrypt which of course fails.
does somebody know how i can encrypt and mount the externeal drive automaticly?
i have made a backup of /etc before i made a new installation of opensuse 11.2. is the possible to use the old fstab entries for that after installing luks?
opesnSuse 11.1, linux 2.6.27.45-0.1-default x86_64 This host has two samba shares that are located on an OS/2 server. Neither mount at boot time but they do mount from the command line.
kernel: CIFS VFS: cifs_mount failed w/return code = -6
There are 5 other client computers that mount the same shares at boot time using almost (different user/pass info) identical data. I do not see what is different about this host.
Everything was working fine with dual boot sda/osuse 11.2 and sdb/kubuntu. Decided to install new 11.3. Lost dual boot, can now only boot to 11.3, sort expected that. I see the root and home partitions in Dolphin but can't mount or open them? Would like to access the files copy to Osuse. Rite clik get me "error permission denied" I can reinstall Kubunt and it will set up my boot loader correctly with grub2, but is their a better quicker way? Why does Osuse still use the legacy grub?
View 5 Replies View RelatedFormated new drive with ext3 on external drive on Suse 11.1 When upgraded to 11.2, drive was not connected... Could not get mounted after that... Set up another boot drive, could not get to mount. Found post with following:
>cryptsetup luksOpen /dev/sde1 restore
>mkdir /restore
>mount /dev/sde1 /restore
Error as follows: mount: unknown filesystem type 'crypto_LUKS' Have also got to another point where superblock was incorrect. I can use terminal, but am not a linux guru... Have looked at other posts under luks, but can not find a solution.
I got three times fsck failure during system booting, fixed issue by reinstall whole suse last two times, this time I really do not want reinstall.
View 4 Replies View Relatedhow to mount HDDalways all time when i restart system automatic mount when system startup
View 1 Replies View RelatedDue to a power outage, my EXT4 file systems (which contain /usr and /opt) no longer mount at boot-up. They are, however, seen by disk utility in Knoppix, so I assume the data is still there and that it's just matter of making a connection to it.
View 6 Replies View RelatedI tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
I have two ext3 drives recovered from a failed NSLU2 network file server. I need to recover some of the files stored on them, so...I attempted to mount them on my debian ETCH (LV file system), thus:
# mkdir /mnt/usbdrive
# mount -t ext3 /dev/sda1 /mnt/usbdrive
Instead of seeing the drive content I see my harddrive's GRUB & Kernel partition. What am I doing wrong? What do I need to do to see the drive's content?
My question is one of my users was using open suse on his workstation (690 DELL),there are 4 harddrives connected to the machine one is of 160GB and the other three are of 1terrabytes.His 160GB HDD got corrupted the one which is having OS and we replaced it to the new one.User advised to install RHEL 5.2 so i installed RHEL 5.2on 160GB HDD by disconnecting the other three HDD.After installing the machine i tried to mount the other three HDD but could'nt.The error message iam getting is 'Not valid partitiion table'.
View 6 Replies View Relatedi want to get it to mount and set to automount
View 1 Replies View RelatedI installed Linux (ubuntu 8.04) to an 80 gig harddrive, but want to reformat the drive to install windows. Problem is, for some reason windows XP won't recognize the harddrive at all.More importantly, when I boot from a Ubuntu live CD, it doesn't seem to recognize the harddrive. Or at least, there is no entry in /etc/fstab like /dev/hda (hdb,c,d) I have tried different Live CD's (ubuntu, knoppix)... How can I get the Linux liveCD to recognize the drive?
View 2 Replies View RelatedI was copying some files over to my Seagate FreeAgent external drive and someone (->me<-) tripped over the usb cord while walking through the area. Now the drive won't mount.
View 4 Replies View RelatedI've been trying to mount an NTFS USB hardrive inside a Xen DomU, but I keep receiving a permission denied error.I am using CentOS release 5.4 (Final) x86_64 for both Dom0 and DomU with latest updates
DomU # mount /mnt/iomega
ntfs-3g-mount: mount failed: Permission denied
Steps taken to reach the error:
1. I installed fuse and fuse-ntfs-3g in the Dom0 and successfully mounted the USD drive to make sure it worked. Then I unmounted it and block attached it to the DomU.
Dom0 # xm block-attach DomU phy:/dev/sdd xvdc r
2. I installed fuse and fuse-ntfs-3g in the DomU.I turned off SELinux (Though I don't think this is an issue)
DomU # /usr/sbin/getenforce
Permissive
3. checked for the USB drive with fdisk and found it /dev/xvdc1
DomU # /sbin/fdisk -l
Disk /dev/xvda: 10.4 GB, 10485760000 bytes[code]...........
what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
The HDD is a 500GB internal SATA, The smart claims that the "file system is not clean" but is still green.FSCK ran a few errors and using fsck i copied a new superblock from a backup location, It still won't let me mount and FSCK is still trying to fix a TON of errors. I'm sorry I don't know any of this yet, but I'm concerned that FSCK could be destroying the data on the drive, for example photos and other important things. FSCK is coming with a lot of things to fix, It's gone from trying to fix errors in free blocks of group #1 to over #3000.. Is this safe? Will this work? Can I get rid of whatever caused this problem in the first place?
View 1 Replies View RelatedI have a ntfs hard drive (my "C" drive in Windows) and it has some very important data (baby pictures) on it. The drive is, for some reason, very fail-prone. Last time it went out, I used ubuntu to make a windows disk (I have the key, nothing illegal!) and it went to the error fixing part or what have you and fixed it all up. That was a few days ago, and I was working on backing up the picturs but hadn't finished, and it failed again. Now I can't get it to fix the current windows installation, even though it's doing the same thing (making a clicking noise and stalling on boot before eventually giving up and booting to the ubuntu "d" drive.), it will only take me to the part about installing a new copy of windows, which I don't want to do because that would wipe the drive.
So my next idea was to try and get at the pictures through ubuntu, but when I use sudo fdisk -l, it only shows me my ubuntu hard drive.. Is there anything I can do to find and mount the other drive? I really can't afford to take it in to a professional for data recovery, and I've had them charge me an arm and a leg and do nothing but wipe my drive in the past, so I want to do everything I can to try and get my pictures back myself.