General :: Upsize Partitions On New HDD - Dual Boot (11.04 On Win7 With Grub)
Aug 12, 2011
I have been an MCSA for the last 20 years, but recently I have been very impressed indeed with Ubuntu 11.04, having dabbled with and then discarded Susi Linux some five years ago. My problem may be summarised as outlined below: Using the downloadable ISO I installed Ubuntu 11.04 as a dual boot on a Win7 100GB HDD on my Lenovo T61 laptop. No problem they both rock and I'm very impressed. During the installation procedure I selected the largest partition sizes available from the Ubuntu installer wizard being 25GB Extended split into 18GB Ext4, and 3.2GB and 3.2 GB swaps (I couldn't suss out any way of manually increasing them any further).
I found that the 11.04 Startup Manager application didn't work at all, so I downloaded and installed Grub Customizer 2.1..and that did work after a fashion.. certainly enough to actually effect changes in the grub configuration settings. Everything worked so well on the 100GB HDD that I decided to transpose the entire disk image to a new 500GB WD Scorpio and make the dual boot my main working disk. Using Acronis I imaged off the 100GB installation selecting the partition by partition, and retain disk signature options. I then recovered the image to the new 500GB HDD and everything works beautifully on the new HDD.
Except of course all the partitions are still the same size. I won't waste your reading time recounting everything that I have done using Acronis Disk Director (V Good) and Gparted (not so good), but needless to say whatever I do Grub won't have it, and I have lost count of the times that I have re-recovered the good image. Basically I want to increase the partion sizes to apportion larger partitions to both Win 7 and 11.04 and obviously I'm missing something somewhere.
Fdisk -l -u produces..
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9f011ed1 .....
View 6 Replies
ADVERTISEMENT
Oct 4, 2010
I'm completely new to Ubuntu, and haven't actually installed it yet, so my questions aren't concerned about how I use it, but rather the problems of installment and more importantly how to get started. The first thing I got a little question for is how to split my HDD into two partitions in order to install Ubuntu, as I will be dual-booting it with Windows 7. The second thing I want to ask about is how big the risk of corrupting my HDD is when installing Ubuntu, and whether I can take some precautions in order to reduce the risk of said thing. The third thing I'm gonna ask about is how to get drivers for my graphics and that alike. And fourth and last: Is it going to make a difference that I'm running it on a laptop?
View 9 Replies
View Related
Apr 22, 2011
I've resized partitions with some program - perhaps even gparted - but from Win7. partitions are indeed resized, but now I can't boot Win7, grub says:
"No such device found - No such partition found".
I tried to use some advices on similar problems I found here (like adding GRUB_PRELOAD_MODULES="part_msdos" to etc/default/grub and running grub-mkconfig after), but nothing helped. I guess I could restore win7 with installation dvd but I want to fix GRUB (and have both ubuntu 10.10 and win7)
Code:
john@john:~$ sudo fdisk -l
[sudo] password for john:
Disk /dev/sda: 82.0 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd576590b
Device Boot Start End Blocks Id System
/dev/sda1 1 789 6336513 f W95 Ext'd (LBA)
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 1476 4008 20346322+ 7 HPFS/NTFS
/dev/sda3 4009 9964 47841570 7 HPFS/NTFS
/dev/sda5 1 749 6008832 83 Linux
/dev/sda6 749 789 326656 82 Linux swap / Solaris
View 5 Replies
View Related
Mar 26, 2010
I have a Windows Vista box upgraded to Win7 and then installed two (yes two) instances of Ubuntu 9.10 on the same box.
I don't need one of them (it had a corrupted install ISO disk) and want to remove the partition using fdisk or parted or similar utility.
How do I know which instance of Ubuntu is used for each partition I selected when I reboot the box?
There are two different versions displayed and I always select the newer one but how do I know if I remove the right one or not?
Also, when I restart in Win7, the BIOS/OS wants to check the disk everytime and now I've started skipping this check (it takes several mins).
View 32 Replies
View Related
Apr 1, 2011
I am trying to Dual-boot Windows & and OpenSUSE 11.4, and have run into walls all over the place. Here is what I did:
1. Windows 7 was already installed. (Don't like it, freezes all the time)
2. Installed OpenSUSE using default partition options.
3. Booted into OpenSUSE with no problem
4. Tried booting into Windows, no joy.
5. Got that figured out, now I can get into Windows.
6. GRUB is gone, so now I can't get back into OpenSUSE.
View 8 Replies
View Related
Jul 9, 2011
I wanted to install ubuntu 11.04 alongside win7 on my notebook (with no optical drive). I created 2 primary partitions (one for win7 [ntfs] one for ubuntu [ext4]) and 2 logical partitions (one for swap one for general use for storage[ntfs]) by running ubuntu from my USB Flash disk and using gparted. First, I installed win7 without having any problem, then ubuntu also without having any (apparent) problem (I installed boot loader on MBR: the default setting). After the ubuntu installation is over, I was instructed to restart my computer as usual and win7 started without asking me which OS to boot. When I run ubuntu from my Flash disk and run gparted and selected the boot drive as the partition on which ubuntu was installed, I got the error saying "missing operating system". I suppose GRUB is misconfigured and that is causing the problem because nothing went wrong during the installation processes. How to configure GRUB by running ubuntu from my Flash disk. BTW win7 is working just fine.
View 4 Replies
View Related
Jul 5, 2011
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
View 5 Replies
View Related
Sep 13, 2010
I'm having serious troubles to install ubuntu-10.04.1. My raid is an hardware raid with intel chipset. Note that win7 is already installed and working with my raid. I made some space from windows, to install Ubuntu (40gb). First, I run the installer, everything seems to be fine. I choose to install Ubuntu were there is the most space free (sorry, I'm not sure about the real terms used there).
Then my partition with the vista loader appears. So the installer can see my raid, and should work fine (everything is detected correctly). But once I'm in the end of the installation (around 95%), a pop-up appears, and tells me that Grub can't install in /dev/sda and it's a fatal error. I can choose an another destination, but it doesn't seems to work.
View 9 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
Mar 29, 2010
i'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
View 9 Replies
View Related
Jul 27, 2010
Current rig:
Toshiba Satellite L455 laptop
Celeron 2.20 GHz
Windows 7, 64bit
3GB RAM
I downloaded the DVD release of Kubuntu 10.04, from Kubuntu.org. The file is: Kubuntu-10.04-dvd-amd64.rar . I burned it to a DVD, as image, with ImgBurn application. See any problems so far? I want to dual-boot, leaving my Win7 in tact. I am confident that I can handle this with some patient instruction.
View 14 Replies
View Related
Dec 15, 2010
I cannot boot into the Windows 7 partition, which I guess is /dev/sda1. I have Slackware installed on /dev/sda2 which boots fine, my /etc/lilo.conf looks like
Code:
/etc/# Start LILO global section compact
[code]....
View 2 Replies
View Related
Sep 1, 2011
i have ubuntu 10 and win 7 dual booting on one hdd, all of a sudden grub says error no such partition when i select windows at the boot menu. and i cant get to the win7 partition from ubuntu (to play music and stuff, this used to work, places, mount filesystem, 250 gigs whatever). i've tried the stuff in these links and nothing has worked so farpartition info
sudo fdisk -l /dev/sda
Device Boot Start End Blocks Id System
/dev/sda1 1 29094 233697523+ 7 HPFS/NTFS
/dev/sda2 * 29095 30401 10498477+ 83 Linux
View 8 Replies
View Related
Jul 22, 2010
I need to install linux (with Grub) un a disk with windows 7 loader (i have 2x choice on that loader and i need to use it).
I tried to dig to find out some methods but nothing.
It's safe? It's better to install Grub on another partition - same physical disk?
View 5 Replies
View Related
Jan 25, 2011
I'm only a few months into working with Linux, and am getting used to it slowly. I messed up trying to load Ubuntu 10.04 on a new Gateway (Acer) laptop that has Win7 on it. I need Windoze for a couple commercial applications. Neither will boot w/o a CD. I'm guessing I messed up the load. I would like directions/ideas. I think that since Windoze is such a hog, I should remove Linux and partitions, restore Win7 and try again. Do I need to do something to GRUB as well?
View 5 Replies
View Related
Jun 2, 2010
I would like to know the best way to dual boot an already installed Win7 HDD, with adding a second HDD to which I will install Mint9?
I have attempted this in the past with Mint8, but managed to screw it up some how with Mint 8`s Beta Grub2! So bear with me if I am skittish on repeating a "conventional" Grub bootloader selection approach!
This time I would prefer to install Mint9 to it`s own HDD with Win7 disconnected if possible, and installing Mint`s Grub bootloader directly to the Mint HDD installation, just to insure Win7s MBR isn't affected by the Mint9 installation, by keeping each O.S. and it`s bootloader completely separate and apart. Of course then comes the question of how to access my new Mint 9 installation, since reconnecting my Win7 HDD (with it`s MBR) will become the default, with no knowledge of any Mint installation.
Would a third party bootloader such as "Easy BCD" be the way to go? Or am I over complicating what I would like to accomplish here? The main thing is: NOT having to upset my twice installed Win7 installation again!
View 14 Replies
View Related
Jun 7, 2010
I want to install boh win 7 and backtrack4 on my pc. how can I do that?
View 1 Replies
View Related
Dec 24, 2010
I have a win7/10.10 dual-boot set up, more or less following the lifehacker.com tutorial (I know, I know). I had to reinstall windows, and its taken over the MBR so that only win7 boots now. My shared drive and the ubuntu filesystem are still there, I just can't get to them without a boot cd. So, I tried to follow the tutorials, which all basically say to reinstall grub or grub2. I tried one method, but ubuntu told me that installing grub2 anywhere but the MBR was a bad idea
View 8 Replies
View Related
Jun 6, 2011
I have a e-machine x64 machine, running win 7 home premium. I have tried to run WUBI, and do a side by side install, but either way, I cannot get it to dual-boot. Any ideas? Comments (other than trashing Win-7?).
View 2 Replies
View Related
Aug 15, 2010
I just tried to install OpenSUSE 11.3 on sda4 which is approximately the 2nd half of a 1TB drive, with a pre-existing Win7 installation on the 1st half. The installation summary (before it made any changes) told me "The bootloader is installed on a partition that does not lie entirely below 128GB. The system might not boot." Naturally, not keen on having a computer that won't boot, I aborted the installation.
Of course it's not below 128GB -- Windows is there.
Is there a workaround that is straightforward enough for someone who has very limited experience with GNU/Linux and isn't a comp-sci student?
View 10 Replies
View Related
May 29, 2010
I'm a pretty experienced Windows user, and have coded in x86 and win32 API for a while, so I know the system reasonably well. I've used windows since the days of Win95, and prior to that I had an Amiga - so I'm pretty rusty in unix-like operating systems. I have little C coding knowledge beyond reading it, though I can understand what the programmer is doing from reading the source. My only experience with installing linux was on a 486 laptop that failed spectacularly when the CDROM couldn't be detected and used, so I'm necessarily a little wary of doing this, but I've become quite exasperated with Windows lately.
I have decided to make my life interesting (if not easier at first) by dual-booting Linux with Win7. My current machine is a dual-core intel laptop with 2GB of RAM and an ATI X1250 mobile GPU, with a 120GB HDD. I have two partitions currently on this machine - both 60GB-ish. The main C: drive is Win7. I'm aware of the hidden partition that Windows installs. I have an external 1TB USB drive for my applications and data, so space shouldn't be a problem. There is no floppy drive (unsurprisingly) and I can boot from the internal DVD drive.
I have chosen the Slackware 13 distro because it seems to be well respected as a learning tool for unix-like operating systems. My main aim here is not to abandon Windows at first, but to learn a new OS. I'm aware that Slack may not be the most user-friendly distro, but will give me knowledge that I might not gain under other distros. If I'm making a mistake here, then let me know! I have plenty of free time to devote to this little project, and I'm not afraid to learn. I am however afraid to destroy my Win7 fall-back. If all else fails, I need to be able to go back to a working OS to jump on the net to find the answer to what went wrong.
So my question, as per the subject title, is: What do I need to know before I do this? I have no idea what I'm doing with regard disk partitioning beyond Partition Magic - which I don't actually possess anymore. I can use the Windows disk management app. I have no idea how to manage a boot sector. So are there any gotchas that I need to bear in mind? I've already read this thread: [URL]. Which I must admit looks very complicated! I have a fair bit of time before my Slackware 13 DVD-ISO image downloads (20KB/Sec) so have some time to gather information.
View 14 Replies
View Related
Oct 9, 2010
I had Windows Vista Business in my compaq presario CQ40-145 TU laptop, over which I installed Fedora 13, making the system dual boot. The Windows is set to be the default OS. Now I want to replace Vista with Windows 7 professional without affecting Fedora. As far as I understand, during boot up, the system enters Fedora's booting process and then gets redirected to Windows, and it is not directly windows even if the default OS is windows.
The reason behind not disturbing fedora is the updates, extra software and packages installed and the pain and time it took me to make my speakers, wlan and flash player work in it. I even don't remember the exact process of what I did. I don't have now so much time to search for it again. So I will take up only that way in which Fedora is not affected at all. And the second problem is my DVD drive is not working at all. So I'll like using USB stick for the same.
View 8 Replies
View Related
Jun 21, 2011
the only issue that i have: the wireless is always disabled.
when i install new updates, the wireless comes back enabled and everything is fine but when i restart ubuntu its disabled again !!
i have a DELL studio 1537 laptop (broadcomm wifi card)with a win7 service pack 1/linux ubuntu 10.04 LTS dual boot.
View 11 Replies
View Related
Jan 9, 2011
I have a Centos 5.5 system that had 2 primary partitions (2nd is setup as LVM with multiple LVM partitions) and then installed Windows 7 as Dual Boot.
However, Windows 7 has installed a 200MB system partition which is GPT/EFI as partition 3 and the Win7 OS as a Primary Partition.
I have a heap of space undefined after this fourth primary partition.
However, as 4 primary partitions have been used, I can no longer create an extended partition to utilise this.
As such I would like to know what is the best and safest way to proceed, and if possible step by steps instructions for the best option eg:
1. Delete the Windows 7 System Partition and create the extended partition (I expect this will prevent Windows from booting)
2. Use something like partition magic to change the Win 7 OS Partition 4 to an extended partition (Not sure if this will work)
3. Make changes to the overall system including both Linux and Windows so that it will use GPT only (I have
had no experience with GPT so this is a bit scary)
4. Other?
View 2 Replies
View Related
Aug 13, 2010
I recently upgraded to Ubuntu 10.04 from earlier versions. I have a dual boot system with Windows 7. Grub was set to boot Windows by default Things were working fine. I decided to upgrade to Grub2. It seemed like a good idea at the time. Now when booting up,the name at the top of the Grub menu is 1.98, which is Grub 2. When I run grub-install -v, it comes back grub-install (GNU GRUB 0.97) which is not Grub2. Now when I boot up, Ubuntu 10.04 is the default. I have to manually choose Windows if I want to use that system. I have been unable to change the boot order following instructions from this site. Any Way changing the boot order to make Windows 7 the default. I am using a Toshiba Satellite.
View 5 Replies
View Related
May 23, 2011
I have a dual boot Acer Aspire One, after reinstalling Windows back to "original factory", the way it was straight out of the box, it now will not boot up at all. It goes to the Windows start screen goes blank, and loops there infinitely. Is there a USB tool I can use to figure out what went wrong and recover either my Windows or Linux partition with out having to do a complete reinstall?
View 1 Replies
View Related
Mar 4, 2011
I have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
View 9 Replies
View Related
Oct 18, 2010
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
View 9 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
