I cannot get 1024x768 resolution permanently in my screen. When i go and adjust it in the kde personalize setting in the display menu everything seems to work. But after i reboot the system, the resolution again changes. Then i have to again configure it to 1024x768. Also i cannot find sax in openSUSE 11.3.
View 7 RepliesCan't set screen resolution 1024x768 permanently. There is no tools like sax2 which is in openSUSE 11.2. I am to set screen resolution to 1024x768 every time after loggin in.
View 3 Replies View RelatedI just installed 11.4 x64.I have already updated and installed the nvidia 260.19.36 driver via the nvidia repository. The video card is a GEforce 6200.The problem is the highest resolution it will allow is 1024x768.With the same hardware in 11.3 it was running 1920x1200. How can I get that back?
View 9 Replies View RelatedThe monitor is a dell 2009 w (16:10 with around 1680x1050 IIRC) I have a fujitsu desktop with the intel core i5 CPU. the crux is the i5 has an integrated GPU. hwinfo says 'clarkdale integrated graphics controller' and yast tells me the same too, knowing the monitor model as well (with correct resolution) So we have an intel GPU ... but the resolution of the kde desktop is always the 1024x768. sax2 do not accept any other resolutions - he knows only threee, one larger at 1280x1024. But even if i try to turn it on he falls back to 1024x768. this is independed from runlevel 3 or 5. the /etx/X11/xorg.conf knows the monitor and the two modes 1024 and 1680 - but everyhwere else it seems that it is unknown, using default vesa mode... the gfx tools seem to ignore the ability of the higher resolution.
View 4 Replies View RelatedI'm having a real fight with an Nvidia 6100 video under 11.2. I cannot get anything besides 1024x768 or 800x600 resolution with any technique besides doing an upgrade installation over an existing 11.1 system. I want 1440x900 for this wide screen LCD and that works with the upgrade install but that gets me into other problems with versions and other stuff - not a desireable choice.
OK. I know that the Nvidia driver (190.53) works as all is well under the upgrade. When I do a totally clean installation or a clean install with the existing /home I get a default 1024x768. If I use sax2 to try and change it one of two things happens: the change is ignored or I drop to 800x600 and the ball game is over: I'm stuck there, period. Other than a couple of commented-out lines, xorg.conf is the same as it was or 11.1 (and back to 10.1 after allowing for version changes) after running sax2 but even nvidia-settings won't give anything beyond 1024x768 if I try and use that.
I've been through the how-to stuff and back messages here but I'll be darned if I can force the desired 1440x900. I had a similar issue with 10.2 or so where the only way to get it right the first time was to set the desired resolution to 1440x900 during the hardware setup during the installation but that seems to have disappeared along with xorg.conf which only appears after running sax2. I can't even use the manual diting tricks in xorg.conf I've had to use with some cards - it seems to be completely ignored and I can't see any real problem with it anyway once sax2 builds it. On a couple of machines with later version of the Nvidia video everything is working as expected, at least with GF 6800 and higher video.
Recently I have acquired 2-port KVM switch. When the monitor is connected through this KVM in Windows 7 resolution is properly detected - 1280x1024. When I go under Linux (openSUSE 11.4 with KDE, nVidia 260.19.44) there is a problem with the resolution. In the screen settings does not appear a resolution higher than 1024x768. How do I set the desired resolution in Linux?
View 4 Replies View RelatedOpensuse 11.3 with latest updates
KDE desktop
Whatever resolution I choose, 1600x1200 is preferred, it is reset to a default of 1024x768 when I log out. I use the "Configure Desktop" option to set the resolution. I can find no other method to do so. The graphics adapter is an ATI hd3200. I have installed the fglrx driver. I cannot fine the "Control Center" for the driver. How do I make the selected resolution permanent?
I can't change the resolution beyond 1024x768 on my Dell Latitude D600 running 11.2. It's got a Radeon Mobility 9000. The only fixes I've seen involve the Intel 915 chipset not this one. I've changed it in sax but even though it says it should be 1400x1050 it remains at 1024x768.
View 3 Replies View RelatedI just installed openSuse11.3 on my desktop, but when I switch on my pc, windows starts aumatically. I can run openSuse only if I insert installation cd, select BOOT FORM HARD DISK and then Grub appears...I have a problem also with screen resolution, I installed nVidia drivers, but the maximum resolution is 1024X768...
View 3 Replies View RelatedBarebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
View 1 Replies View RelatedI'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies View RelatedWell i have HP D2832. A very old CRT Monitor from HP which have resolutions supported upto 1300 one but i can't get the resolutions after 1024x768. I want to get 1152x864 and cannot work to get it show in Monitors Panel.
In monitors panel it shows: Monitor: Unknown.
FC12-x86_64/KDE I want to set my resolution to 1024x768 using Intel Video adapter using the the i915 kernel module.
Putting the line below in /boot/grub/menu.lst on the kernel line after
rhgb quiet i915.modeset=1 vga=318
Is this the correct setting ?
I don't want to use a xorg.conf file.
Can't make Slack 13.1 to run at more than 1024x768. No problems where with 12.0-13.0. Here are portions of my xorg.conf and Xorg.0.log:
Code:
Section "Monitor"
HorizSync 31 - 81
VertRefresh 56 - 75
Section "Device"
[code]....
Note the last line marked (**) - "from config file", but I only have 1280x1024 there ! And what does that mean
(II) NV(0): Using fuzzy aspect match for initial modes
(II) NV(0): Output VGA2 using initial mode 1024x768
(--) NV(0): Virtual size is 1024x1024 (pitch 1024)
And KDE/Display only offers up to 1024x768 too. Didn't try NVIDIA driver yet but 13.0 had no problems with the same monitor,similar Card and nv driver.
I installed Debian 8 Jessie with the GNOME 3 desktop environment and I couldn't get pass the login screen after several reboots. Since I read that NVIDIA graphics are problematic, I decided to reinstall the system but selected Mate desktop, which appears to be less graphic intensive than GNOME 3. It worked. However, I can't get a higher resolution than 1024x768 (In Windows I could). The Mate settings in the "System → Preferences → Monitors" does not show higher resolutions.
The information of the graphics card is this:
Code: Select all00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] [10de:03d0] (rev a2)
Before I try to install proprietary drivers as instructed in [URL] ...., I'd like to see if there's anything to try first with the default stuff installed by the system, because that page says:
As of jessie, the need for the proprietary drivers is pretty much over - nouveau now works quite well and works with dual-headed displays by simple and easy configuring from within your desktop(for KDE see System_Settings/Hardware/Display_and_Monitor/Display_Configuration) . The proprietary drivers don't provide normal logging and can be a hidden source of problems.
I've googled the issue and had a little luck, though I can't seem to change my xorg.conf file because permissions are defailed. This is the example xorg.conf file I wrote based upon my original and the modifications:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[Code].....
I am using Mercury p4VM800 mother Board and Intel PIV 2 GHz Processor. I have installed the fedora 10 Today. My screen resolution was automatically set to 650x480 and this is the only option available in graphical mode. I am not able to increase the resolution to 1024x768. I once again reinstalled the F10. during the installation, in the boot: option I have entered 'linux resolution=1024x768', but it won't work.
View 4 Replies View RelatedI'm still on GNOME with 800x600 resolution but I can't switch to 1024x768 because there is no 1024x768 option under resolution settings.My monitor is 17" so 1024x768 should work fine.My graphic card is integrated GeForce 6150.
View 6 Replies View RelatedI have ati radeon 9600x series card. Cannot change resolution higher than 1024x768.
View 3 Replies View RelatedMy graphics card just died so I bought a Radeon HD 4350. My monitor is an Acer AL1916W whose default resolution is 1440x900. So I reinstalled Fedora 14 with KDE but I can't set the resolution higher than 1024x768 because that is the highest available.
Code:
[corneliu@localhost ~]$ lspci
00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:11.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
[Code].....
I rebooted but still no dice. I saw a video on ..... using a graphical tool to modify the monitor settings but it seemed to be a Gtk application and I rather not use Gnome applications in KDE (not that I don't like Gnome, but I don't like to mix applications).
change my resolution from 800x600 to 1024x768..since the latter option is not available in my display settings?
View 1 Replies View RelatedI'm trying to use the Xubuntu-based BitDefender Rescue Disk, and having an issue. Posting in their forum didn't return anything, so I figured I should ask here next.
Using the default settings, the Rescue Disk starts in 800x600 and complains that the resolution is too low to run the app in graphic mode.
FYI, this servers + monitor run Windows just fine in 1024x768 @ 75Hz, and even higher.
I tried adding "screen=1024x768" to the command-line, to no avail.
FWIW, the default includes "vga=791" but I don't know what it means.
If someone had the same issue, how can I set the resolution to something higher so I can run BitDefender in graphic mode?
I can't change the video resolution for Intel 82740 (i740) video card.I'm new to Ubuntu 10.04, as I've just installed it and I have a problem with video settings.I can't change video resolution for my video adapter. I can only choose between 800x600, 640x480,400x300... not 1024x768 for example.No restricted or proprietary drivers...I used Knoppix 5.1.1 Live CD and it automatically set the resolution to 1024x768.I also used Puppy linux 5.1 Live CD and it had a configuration program which also utilised 1024x768.If these versions of linux can utilise the 1024x768 resolution, why can't Ubuntu 10.04
View 9 Replies View Relatedafter the latest kernel update (2.6.32-26), my computer will no longer start up with a screen resolution higher than 800x600. Before this update, my computer would sometimes startup with this problem, but this could usually be fixed with a restart (or two if necessary). At this resolution the panels and a lot of tool-bars will not display properly, so I am limited as to what I can do using the GUI. my video card is an S3 unichrome (I think. It is built-in to the motherboard so I don't know for certain) my screen is an old ctr one I am running Ubuntu 10.04 on the 2.6.32-26 kernel.
View 3 Replies View RelatedIt's an HP DX2300 running Fedora 13, I think it has NVidea chipset, my other computer is similar machine running Redhat 5.5 and it does 1680x1050 with the same monitor.
View 15 Replies View RelatedI've just installed Fedora 14. When i try to change the resolution i cannot get past 1024x768. My graphics card is the onboard Intel g41 express chipset which is - for sure -capable of bringing a higher resolution than this. I googled on this and found that i have to edit the xorg.conf file to add the required resolution mode with no luck. Moreover, I learned that Fedora has dropped the xorg.conf usage since the 10th release, which further implies that there should be a more elegant solution than editing this file. Is is a drivers problem? i searched for a linux drivers for this card with no luck.
View 2 Replies View RelatedSo I have a resolution problem. Before posting here, I've checked many MANY forums for similar issues, handpicking certain techniques and trying each. Sometimes they worked, and then my problem came back.
Distro: Fedora 14
Monitor: emachines 18.5" E181HV
GPU: Nvidia GeForce 8800GT
resolution: 1360x768
My problem is that the resolution will never stretch past 1024x768. I have the image of my desktop in the middle part of the screen, with black sections on either side. Here is a list of things that I've already done or tried:
Install Nvidia drivers
disable Nouveau via grub.conf
use xrandr to modify xorg.conf and add the resolution
different cable
different DVI converter
One day, I logged into my Fedora boot, and after a week of frustration, the issue decided to fix itself. So I continued on, using Fedora and planning on a permanent switch from Windows. I log back over to Windows to play some games and whatnot (I'm not a fan of how Wine handles some games). I then log back to Fedora, and the issue is back. The resolution is messed up again.I've since removed that partition from my drive, as I've reached my wits end with troubleshooting. My linux expert friend tells me it may be that my monitor is just not good enough, or is not sending/receiving the proper EID signature, thus will not accept the resolution, or something along those lines.
I like to use rdesktop at resolution 1024x768. But without adding the parameter "-g 1024x768", it always connects me via 800x600. Is there a way to change the default value to be 1024x768 so I don't have to keep telling the system?
View 1 Replies View RelatedMotherboard: M2N-MX with Athlon X2 3600 from 2006 onwards
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Kernel: Debian Sid with 2.6.32-5-amd64 and custom 2.6.36-rc7
Monitor: Samsung 712N, 17inch, with native 1280x1024 resolution
Everything was fine with both kernels with custom 1280x1024 resolution upto yesterday. But when I rebooted today, first I noticed that X stopped working. After updating xorg.conf to 1024x768, it started working . After going through the kernel log in /var/log/messages, I noticed the following differences
Yesterdays log:
nouveau 0000:00:0d.0: Detected 64MiB VRAM
nouveau 0000:00:0d.0: 64 MiB GART (aperture)
nouveau 0000:00:0d.0: Saving VGA fonts
[code]....
There is an extra "Load detected" line and the resolution got reduced from 1280x1024 to 1024x768.
I recently installed Debian 5.0 (Lenny) on a Dell Inspiron 1545 laptop. I have been banging my head trying to figure out why my laptop display (15.6" optimum resolution 1366x768) is only running at 1024x768. This was not a problem in Ubuntu even as far back as 8.10 (Intrepid Ibex) which came pre-installed.
I am running kernel 2.6.32 (from Backports) to get WiFi to work and it still hasn't remedied the video oddities.
How do I either:
1) Letterbox the 1024x768 so that it isn't distorted?
or, more preferably,
2) Display in the full 1366x768?
My video card is:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
I also have the xserver-xorg-video-intel driver from the stable repositories installed.