OpenSUSE Install :: 11.2 - Internet Works But Online Access Test Failed
Oct 1, 2010
At some point, the install process asks whether to test internet access. I replied Yes, and the test failed. Retries also failed, leading me to conclude, mistakenly, that the ethernet card was not supported by SuSE 11.2. Finally I elected to skip the test, resigned to the loss of internet access. The install program then proceeded to access online repositories without difficulty, and I had no further difficulty accessing the internet. So why the misleading test result?
View 3 Replies
ADVERTISEMENT
Jun 17, 2011
I just installed 11.4 via the net install cd. In the configuration step, the internet connection test fails. Why would this happen if I just installed opensuse using the internet? It looks to me as if opensuse can already figure out how to use my network card. I went ahead and skipped the test, but it still doesn't make any sense to me. Let's see if internet works once I'm logged in...
View 2 Replies
View Related
Feb 19, 2010
I tried to set up my internet connection using the network manager and not the classic iufp method. At first it just didn't work but after deactivating IPv6 I got it working: firefox can connect to the internet. What troubles me is the online update with Update Applet. The following message pops up: "Error: packageKit error repo-not-available: Failed to download /media fromAlso when I go to Yast->Software->Software repositories I get the msg:Systemadministration is blocked by PID 2459 (/usr/sbin/packagekitd). Close the application and try again.Using the command "sudo zypper refresh"eates the same message.I spent already hours trying to figure out the problem without luck
View 3 Replies
View Related
Feb 21, 2011
I am using OpenSuSE11.1 very frequently I need to install and update the software and packages.but I am getting this error: Download failed:File '/repodata/repomd.xml' not found on medium URL...
View 3 Replies
View Related
Jan 13, 2011
my server is still running on 10.3 and I want to upgrade it to 11.3. I can't access it physically so it has to be an online upgrade. I have already learned that it is possible to upgrade from 11.x to 11.3 using Zypper from this nice german tutorial (Upgrade). But does it also work from 10.3? Should I upgrade all at once or every single version for itself?
View 3 Replies
View Related
Dec 25, 2010
I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet.
The reply to dmesg | grep -e 'tty' -e 'modem' is:
[Code]...
View 1 Replies
View Related
Dec 25, 2010
I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet.
Code:
dmesg | grep -e 'tty' -e 'modem'
is:
Code:
[ 0.000000] console [tty0] enabled
[ 11.098238] USB Serial support registered for GSM modem (1-port)
[ 11.098352] option 6-1:1.0: GSM modem (1-port) converter detected
[code]....
View 1 Replies
View Related
Nov 15, 2010
I am super new to linux. I have tried a lot of distros but went with OpenSUSE11.3. I have both gnome and kde live cd. Now to the problem, When I put in the live cd and boot - the computer finds the wireless card and lets me connect to the internet. This works on both versions. But after clicking on the install icon the wireless no longer starts and then I cant get it to work. Maybe its something I should be doing. After all I am new to this.
View 4 Replies
View Related
Apr 11, 2010
Using OPenSuse 11.2 KDE 4.4 on MSI CX600 laptop. Sound only works in the hardware test, nowhere else. Everything else seems fine, even wireless just worked after an running an update.
View 4 Replies
View Related
Jan 5, 2011
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies
View Related
Mar 18, 2010
I'm running mac osx snow leopard 10.6.2, installed virtualbox, created a partition with it and on that I installed Ubuntu (looking more specifically, I found it is Karmic Koala). For one, is kubuntu ubuntu karmic like mine? Or is that something different? Anyways, Did all that, installed guest permissions and everything, but before that and still, when I load up firefox, I can search some google things, but whenever I go to an actual page or something that seems like it needs just a little more muscle than google searching, it just crashes and disappears. So I basically can't access the internet.
I even tried installing Google Chrome through the terminal by some tutorial on another site. It worked and I got it all installed. It does the exact same thing Firefox does. I can do a couple of searches (sometimes not even that before it crashes) but when I go any further than that, it crashes.
View 2 Replies
View Related
Feb 4, 2010
I am whittling down my list of available YAST Online Updates for OpenSUSE 10.3. Most of the few remaining updates will not install because of an endless error list like this (xmessage on cancel):(gtk:4929): GLib-GObject-WARNING **: invalid cast from `GtkTextView' to `YGtkRichText'** (gtk:4929): WARNING **: Unknown tag 'p'
View 1 Replies
View Related
Aug 28, 2010
I have just installed openSUSE 11.3 Linux on my USB External HDD. I am using fast internet connection and I am able to use it fluently in Windows XP. But not able to do so with openSUSE 11.3. As far as I know there should be a tray icon for N/W but its also not shown. And when I start N/W manager it states that n/w manager is already running.
View 12 Replies
View Related
Jun 28, 2011
am currently using Windows 7 across my networked PCs at home.
I've just received my new Samsung N250 Plus Netbook which comes with Windows 7 Starter (yuk). I read a post on Ebuyer from someone who has installed ubuntu on his N250 so thought I'd give it a go tonight.
My main concern is whether my wi-fi card (Broadcom 802.11n according to windows) will work when I remove windows and install ubuntu. I intend to use the netbook for internet use only while working abroad.
Is it possible to test it works by running ubuntu from my USB stick first (without removing windows 7)?
View 6 Replies
View Related
Nov 22, 2010
I had no 3D acceleration on my AMD system with RS690 IGP graphics. I'm using 64-bit install and desktop kernel, 2.6.34.7-05. Snippet from dmesg:
[Code]...
View 1 Replies
View Related
Nov 17, 2010
I have internet from KabelBW (cable modem which doesnt require any username,password,dns,mac...) they gave me a cisco modem, I connected it with my asus router and it has been working fine since today! when I woke up I turned on my lap top and loged in skype, but I couldnt open google, then I tried yahoo..nothing! I havent made and changes yesterday! I dont know what is wrong! I am new to ubuntu and I dont know what to do! when I connect directly to modem I have internet it works good, but when I connect through my (LAN or Wireless) router I cant view web pages. I have tried to google for the answer but all the answers are for windows OS versions! I tried to restart lap top, and the router 100 times but nothing!
View 9 Replies
View Related
Nov 8, 2010
I cannot use the online update and any other web repository because I got the following error while using the online update:
Code:
Errore durante il download di (curl) per 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Codice dell'errore: Connection failed
Messaggio dell'errore: couldn't connect to host
the translation is:
Code:
Error during downloading (curl) from 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Error code: Connection failed
Error message: couldn't connect to host
I would point out that any other application that needs accessing the internet is working correctly.
View 9 Replies
View Related
Oct 17, 2010
I ran a firmware test, after I discovered a bad memory stick on a 1 gb stick. Replaced my memory stick and just for grins ran a firmware test and I don't understand this:[Fail] Failed to locate HPET base [Fail] OS/2 memory hole test-The memory map has a memory hole between 15mb & 16mb.
Re-ran MEMTEST just to make sure my new memory was fine, no errors.My Linux OS appears to be running slower on boot-up than normal, What documentation there is on the internet on HPET is over my head.I ran SMART on the both drives. They were good. So I am a little stumpted.
View 3 Replies
View Related
Nov 6, 2010
Installing from Live USB: Installing from USB on my desktop (used this method for laptop install) goes without a hitch. EXCEPT, I notice there is no support for my wireless card chipset (Atheros 7413, used /bin/lspci to find). I download the drivers for Linux, but I need Make to build the drivers...ok. I download the Make files from my laptop, make coffee, slap the makefiles onto a flash drive and run the configure file on my desktop version of SUSE. Whoops, need a c compiler (odd that openSUSE did not come with gcc? bit confused on that). If you can't tell by now, I've been using linux for less than a month so I am what you would call a noob? After the lack of c compiler, I drove to my office to snag some DVDs to download the DVD iso image, hoping it would have some form of c compiler/make packaged, since the description does say the DVD has more software (can't find any prebuilt versions of either...?)
Installing from DVD: This was my next step. I wrote the iso image to a DVD and proceeded to boot from DVD. The installer fails at the system analysis, saying it cannot "create a repository". writing the iso to a second DVD produces the same result. Googling has not yielded a solution. tl;dr can't use openSUSE on my desktop because my wireless chipset is not suported by SUSE. I need Make to build the drivers, but I need a c compiler to compile Make, and I need the internet to get both for my machine.
View 3 Replies
View Related
Aug 26, 2010
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
View 8 Replies
View Related
Mar 6, 2010
my problem is that the wired internet is working on and off, or not even that, only when it wants too. I have googled and googled, which by the way is not loading at all at the moment, and have not found anything. And i really don't know what's wrong. Some more details: 1) Finished installing suse 11.2 with gnome, yesterday. Internet, and google worked fine right off the bat. I have a laptop and so i suspended it to see if everything was working. 2) Bring back the laptop, no internet. I reboot, internet works (google included). 3) I leave the laptop alone, it goes to sleep mode (or what comes after screensaver).
I bring it back, no internet, i reboot, no internet. So i go to windows. 4) Came back to suse, now, and i have internet and google does not load! This is all with wired internet, i haven't had a chance to try the wireless (there isn't a signal for me to try). However, i am positive it won't work with the luck i've been having. Also, a few days ago i had suse with kde and the internet worked continously. I know it can't be related to the GUI, but it's peculiar.
View 9 Replies
View Related
Jul 6, 2010
I just installed the 10.04 on my laptop a compaq 6510b that was was running xp. Ubuntu cant seem to connect to the internet unless i have it hooked up via ethernet cable but the wifi recognizes my network. in windows i use to log in via the wirless network to my boardband connection.
View 3 Replies
View Related
Apr 11, 2011
I've got a bit of tricky situation with a Red Hat box, our network uses a proxy server to connect to the internet. I've exported its address using "export http_proxy=http://usernameassword@server_iport" and to test I ran a wget against www.google.co.za and got a response, but using elinks to connect to google gives a proxy requires authentication error. It cant possibly be the credentials as wget can connect. I've confirmed that the proxy was exported by running "env | grep -i proxy", I also tried appending that line on both "/etc/profile" and/or "/root/.bash_profile" with no luck. one other thing I noticed is that passing those arguments directly to elinks works, not only this but "ssh -X server_ip_address" then running firefox& and giving it the proxy address also works. Is the any other way to make this line global, meaning to tell all applications that require internet connection to use the proxy? The server is sitting at a remote location and I only have access to a shell.
View 2 Replies
View Related
May 10, 2011
opensuse 10.4 KDE. wired internet works but the network manager is dead, there's a red network icon with a cross in the panel and opening the manage connections window only the VPN tab works all others are grayed out cant setup any wireless or mobile broadband connection. on the live cd there was no problem with network management.
View 6 Replies
View Related
Nov 16, 2009
At the beginning I want to mention that I know that there are plenty of similar bugs on this forum. but...I have installed openSUSE 11.2 64 bit on my girlfriend laptop, network manager successful join my wireless network.I can login to Skype, Kopete and chat but I can't browse pages with Firefox, also plasmoids that require Internet connection doesn't work and Google Earth can't connect.But Skype does I have tried to use ifup, no_acpi, disabling IP v6 with no success.She's got Toshiba L300 laptop.
View 6 Replies
View Related
Jun 15, 2010
I had some issues with Wubi installations of Ubuntu, so I figured out how to create a LiveCD and to install from the CD. I am working on Linux now and I am having no issues as far as the Penguin goes. I hash-checked the iso and used older CDs more suited for booting.I chose to install from the CD, and I selected the option which partitions and installs Linux alongside Windows. I was prompted to import some user folders from my Windows Vista, and I agreed. These appeared in Linux and also work fine.
However, after a few hours of messing with my new Linux, I restarted and I realized all I have in my boot menu now are some Linux options, memory test, and a Vista loader & vista recovery. I had intended to have a dual boot system. Did I delete my Windows without meaning to, or can I change the bootloading process somehow to include both Linux and Vista?
Upon selecting the Vista Loader, I was asked if I wanted to recover my files, etc. I refrained because I wasn't sure what the effect would be on Linux. Is there a way to have both Vista and Linux show up normally in my boot menu, or will I have to go back and forth recovering every time I chose to use the other OS?The only reason I still want to use Windows occasionally is because I had Maple software in Windows which was useful for school.
View 9 Replies
View Related
Apr 21, 2010
On my work computer I installed Opensuse11.2 in VirtualBox. However online update or installs which are downloaded through YAST2 are not working. I get the message "Failed to download media ....." and that's it. I configured the proxy and when using the test proxy button it tells me that the proxy works OK. If I copy the link from yast into Firefox I get to the site of the repositories without problems only Yast cannot connect. Neither from the GUI nor from the console. I had no problems with Opensuse11.0 and previous versions. WHat is the problem?
View 7 Replies
View Related
Jul 9, 2010
When I try to update on line I get the messagehttp://download.opensuse.org/reposit...ctory_Desktop/ not found.I am using openSuse 11.2 with KDE desktop.
View 7 Replies
View Related
Apr 11, 2011
I have an OS 11.4 system running on a network which prevents me from using the publicly available update repositories. Is there a way to mirror the update repositories onto a flash drive and updating from there?
Is this as simple as using wget to mirror certain directories on the public repository?
View 5 Replies
View Related
Apr 30, 2011
I performed the online update which included a kernel upgrade. After restart I no longer get a working display. Otherwise appears to boot, as I can see the drive from my laptop via samba. I cannot get a display in either normal boot nor in failsafe. I am also not able to get a terminal screen.Grub boot includes VGA=0x31aAre there any other boot options I can enter to at least get to a terminal?
View 9 Replies
View Related
