I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet.
The reply to dmesg | grep -e 'tty' -e 'modem' is:
[Code]...
I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet.
Code:
dmesg | grep -e 'tty' -e 'modem'
is:
Code:
[ 0.000000] console [tty0] enabled
[ 11.098238] USB Serial support registered for GSM modem (1-port)
[ 11.098352] option 6-1:1.0: GSM modem (1-port) converter detected
[code]....
At some point, the install process asks whether to test internet access. I replied Yes, and the test failed. Retries also failed, leading me to conclude, mistakenly, that the ethernet card was not supported by SuSE 11.2. Finally I elected to skip the test, resigned to the loss of internet access. The install program then proceeded to access online repositories without difficulty, and I had no further difficulty accessing the internet. So why the misleading test result?
View 3 Replies View RelatedIf i leave my laptop idle for sometime, my usb datacard connection gets disconnected. I know its a dial-up connection and if no application is accessing internet it disconnects on its own. The problem over here is when i click on the icon and click on activate it won't happen. So, i have to unplug the hardware and then re-insert it to make it work again.I went through a site, there they have mentioned a work around that is to keep a ping command always running. I'm fine with that, but why do we need to remove the hardware n re-insert it to make it connect to the internet again
View 3 Replies View RelatedI am using redhat linux os rhel 5.3. i am not able to connect to internet via my new tata indicom datacard in this operating system...how can i configure it to work...i am using vmware to run this operating system...
View 2 Replies View RelatedI have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
I have the following problem with sendmail on F14 (had the same on F13 already):
I have a network setup using bridging which is controlled through traditional ifup/ifdown (because NetworkManager can't handle bridging). My sendmail configuration differs from the Fedora default only by having a SMART_HOST relay. The queueing interval in /etc/sysconfig/sendmail is the default (1h).
When my network connection is up, sendmail normally sends email through the relay immediately. Sometimes I have to interrupt the connection for a few minutes. When my network connection is down, sendmail starts queueing email (OK this far). When the network connection comes back up, I'd expect sendmail to restart sending mail through the relay again. But sometimes, that doesn't happen. Instead, sendmail keeps queueing my mail infinitely (I have seen it happen for several days) until I finally notice that my email isn't received, and run sendmail -q by hand (by that time, my boss is already angry that I'm not responding to his email). In that state, even new mail is queued rather than forwarded by sendmail. It appears that the only way to stop that behavior is to restart the sendmail service.
I'm trying to setup a wireless AP with my old asus eeepc, so it can act as a repeater to connect my android device on the other end of the apartment. I've already created the Wireless Access Point using hostapd. It took very little configuring, just changed from mode 'a' to 'g' and changed the channel from 60 to 1 and It was all set. Next I setup a dhcp server. Also simple enough using yast.
Up to this point, I was able to connect my android device to the newly created wireless network. However It doesn't have internet access. I guess I have to configure iptables for this, but I find it incredibly confusing! Here are a few specs to help with any examples: The laptop is connected to the internet through eth0 with IP 192.168.2.120 Hostapd is using wlan0, and I'm pretty sure it created mon.wlan0 So, to sum up, when I connect my android device to the network I can, for instance, see what ever pages apache is currently serving on the laptop, but can't access the internet.
I have just installed fedora 13 onto my old PC. Everything is great apart from the fact that i cannot access the internet. My isp is TalkTalk, they do not support linux, and have suggested that i contact the Geek squad who might be able to help me for the princely sum of �30. i think that all that i need is the ip address for my Isp or something equally simple and my problem will be solved. failure to resolve this issue means that i might have to go back to windows.
The machinery that i have is an emachines 3210, 2.70 GHz, a Dlink wireless router, i am using a cat 5 cable plugged directly into the back of the pc, i am using fedora 13. ps my son is using windows and is connected to the internet still via WiFi.
I have recently downloaded live cd of Puppy Linux and boot successfully from it. But, I could not connect my BSNL EV-DO datacard as no wireless network connection is detected by Puppy. What should I do? How can I configure my BSNL EVDO Datacard over Pupply Linux? Plz.
View 1 Replies View RelatedI need to get the libstdc++.so.5 library ( on a computer with Fedora 8 and don't wonder why it's so ancient,-there is a good reason for it) but I don't have Internet access from that computer, so I can't get to the online repo's.
However, I do still have the installation disk, and I'm typing this from a computer (SuSE 10) that is half a meter from the Fedora box.
I tried the "ADD/REMOVE Software" option on the menu, but it keeps on looking for the online repo and then if it doesn't get it, it fails.
Is it possible to get this library from the installation disk. How? Could I download the single package from the online repo onto the SuSE machine and then move it to the Fedora machine? How do I then tell the Fedora machine to "incorporate" it.
Somehow in the last couple of days, my adobe acrobat reader quit working online. I can read pdf files on my computer, but if try to access one through my google browser, I get a blank page. What can I do to fix? I tried downloading the most recent update of adobe but when I went to run the program I get an error message indicating there is no program to open the update file.
View 3 Replies View Relatedi put a fresh install of 9.10 onto my laptop, i got online set up my network, and can see my other computers. when i open firefox, it wont connect to any website, what should i do?
View 2 Replies View RelatedHi. I purchased a book that comes with access to an online archive of images, and I want to download all of them. The website is only set up to download the images one at a time, though, so I want to use a program to automatically download them. [URL]..I tried the command:
Code:
curl -u username -O http://www.taschen.com/media_archives/type1/downloads/_Q6Q5783.jpg.zip
but it downloaded the following text file:
Code:
Found
The document has moved here.
[Code]...
I cannot use the online update and any other web repository because I got the following error while using the online update:
Code:
Errore durante il download di (curl) per 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Codice dell'errore: Connection failed
Messaggio dell'errore: couldn't connect to host
the translation is:
Code:
Error during downloading (curl) from 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Error code: Connection failed
Error message: couldn't connect to host
I would point out that any other application that needs accessing the internet is working correctly.
my server is still running on 10.3 and I want to upgrade it to 11.3. I can't access it physically so it has to be an online upgrade. I have already learned that it is possible to upgrade from 11.x to 11.3 using Zypper from this nice german tutorial (Upgrade). But does it also work from 10.3? Should I upgrade all at once or every single version for itself?
View 3 Replies View RelatedI am wanting to turn an old desktop to a small file server, just the usual movies, music, pictures, etc. I want to be able to access this not only on my home network I want to be able to access it online so there is a way to get to my files remotely if needed. I was wondering if ubuntu server is what I must use or would the desktop edition do the trick?
View 2 Replies View RelatedI am interested in making wget do a slightly different function for me. I have downloaded it, built it (1.12) and it works perfectly right out of the box. would like to have it login to my creditcards.citi.com https website, give my user id, my password and "select NEXT-SCREEN label=Account Activity", then capture the account activity that returns.
I got these three values in my firefox Selenium script that runs perfectly time after time. My big picture goal, is to be able, on a crontab, to dump my account activity every night at midnight. I am not married to this idea if anyone has a better or different route.
Fedora 15 latest updatesHP Mini 210 NetbookMy internet was working fine. Then all of a sudden it stopped working on my Fedora netbook. I also have an iMac and can connect that to the internet without any problem. So my Internet connection is working fine on the iMacHowever, when I put the cable in my Fedora netbook. I get the IP address through DHCP and DNS automatically. This is the same setting as my iMac. I also have a windows partition on my Fedora netbook. That works fine, so there is no hardware problems.I can ping the router ok. But cannot pingor browse any wReturns cannot find host name google.com. So I think there is something wrong with the DNS.resolv.conf doens't have any DNS address in there. As there are assigned using DHCP.
View 2 Replies View Relatededora 15 latest updates
HP Mini 210 Netbook
My internet was working fine. Then all of a sudden it stopped working on my Fedora netbook. I also have an iMac and can connect that to the internet without any problem. So my Internet connection is working fine on the iMac However, when I put the cable in my Fedora netbook. I get the IP address through DHCP and DNS automatically. This is the same setting as my iMac. I also have a windows partition on my Fedora netbook. That works fine, so there is no hardware problems.I can ping the router ok. But cannot ping [URL] or browse any websites.nslookup [URL]. Returns cannot find host name [URL]. So I think there is something wrong with the DNS.resolv.conf doens't have any DNS address in there. As there are assigned using DHCP.
I tried to set up my internet connection using the network manager and not the classic iufp method. At first it just didn't work but after deactivating IPv6 I got it working: firefox can connect to the internet. What troubles me is the online update with Update Applet. The following message pops up: "Error: packageKit error repo-not-available: Failed to download /media fromAlso when I go to Yast->Software->Software repositories I get the msg:Systemadministration is blocked by PID 2459 (/usr/sbin/packagekitd). Close the application and try again.Using the command "sudo zypper refresh"eates the same message.I spent already hours trying to figure out the problem without luck
View 3 Replies View RelatedI had a duplicate IP from another device on the network that would jut not let it go and was the same IP as my Fedora box that was working fine. After screwing around with the other device I finally just gave up and changed the IP on the Fedora box. Now I can't access the internet at all from the Fedora box. I looked in my routing tables in my router and the mac was showing as the mac of the other device. After some reboots here and there that is fix and the routers routing tables are now showing correctly. The Fedora box still can not resolve any domains or get online. Is there something somewhere inside the Fedora box that is still jacked up from the duplicate IP?
View 9 Replies View RelatedI just installed Fedora64 12 on my laptop. When I tried the Live CD all wen well. Now that I am running the full version I can only access internet pages linked to fedoraproject.org...?? not other pages work like google or yahoo or anything else. This is bizarre. How can I get access to the full internet?
View 9 Replies View RelatedI've been trying to connect to the internet in Fedora 10 for the last week but can't figure it out. The OS has automatically connected to the internet a couple of times but now does not connect at all. The LAN ROM Boot option is enabled in my BIOS and am using a speedtouch 585v7 router provided by my ISP, I have an ADSL router and it's a standard ethernet connection to the router. What do I do to connect to the internet
View 3 Replies View RelatedI can not access internet with Linux. I enter password which I use for windows.
View 5 Replies View RelatedI have an valid account,and I used pppoe-setup to set the dial correctly.After the configuration,I typed "ifup ppp0",nothing wrong happens(no news is good news?).Then I typed "pppoe-status",it said I've connected to the internet . I opened firefox,updated my system through yum ,they all said I haven't connected to the network!!!I've formated my harddisk and reinstall my system,but the problem is still.
View 4 Replies View RelatedI have installed fedora 11 64 bit on a new computer. I have no problems accessing the computers on my local network, but can not get past the gateway. The gateway is running windows XP with IP address 192.168.0.1 and is named "internet". When I boot the new computer in windows, there is no problem. Here is the output of some commands I saw in other posts with similar problems:
$ /sbin/ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:24:8C:7F:10:0C
inet addr:192.168.0.245 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::224:8cff:fe7f:100c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
Firewall disabled.Static IP addys given to each laptop, but makes no diff when dhcp derived IP addys.using wlan Cannot ping either laptop from a windows box, bit windows box pings other computers.Can access internet from either laptop and Samba works too.I can ping one laptop if I plug the LAN wire into it. In fact I can ping either the wlan IP addy or the LAN addy this way. WHen I remove the Lan wire I can still ping the wlan on the laptop, but restarting screws it all up again.I see that iptables and other files change when I plug the LAN cvable in and then remove it again.
View 1 Replies View RelatedIn Fedora 12 how do I make it so a specific program can't talk to the internet?
View 14 Replies View RelatedI installed Fedora 13 on my laptop today after deleting a badly screwed up Windows XP partition. Everything installed smoothly even my Broadcom drivers but I can't seem to figure out how to get Firefox to access the web with a URL.
I can ping Google, and can get to it in Firefox if I use the IP address from the ping, but going to [url] in Firefox will give me an error message about not being able to find the server at the web address. I was also able to update from the terminal with yum update just fine. I've tried searching Google for some answers, and maybe I just can't phrase my query right, but I found nothing that I could use to try and fix my problem.
I've attached a HardInfo report which I hope could be useful if you need to know what my hardware is (an HP Pavilion zv5000 laptop).