I've had opensuse 11.2 for a long time and I've never seen this nepomuk thing run before. But all of a sudden on startup just now, I got a message that it was running. Why? What is this and should I be worried? Why have I never seen it before?
how one can use the nepomuk/strigi file indexing service. I started up dolphin, and typed the search string in the upper right corner, and clicked Search. The search result is a long list of files. The one I need is a PDF file. When I select this file, on the right hand side there is the following info: 'Is part of: 15.2 GiB Removable Media' which is clearly wrong, since this file resides in my home directory, which is on a 200 GiB partition. If I double-click this file to open in okular, I get an error message:
Code: Could not open nepomuksearch:/nepomuk_3A_2Fres_...... Reason: Please insert the removable medium "15.2 GiB Removable Media" to access this file I guess this is some old result from nepomuk's cache (in the meantime I have had to repartition my hard disk, and restore my home directory from a backup copy on an external hard drive - but this has been many months ago, so I would expect that nepomuk have had the time to recognize this)
I just upgrade to KDE 4.3 and it is great release, one problem I have found with it is that The Strigi Desktop File Indexer does not want to start. The error that I get is "Strigi service failed to initialize, most likely due to an installation problem.", does anyone here know if Strigi logs things like this and were? "We must plan for freedom, and not only for security, if for no other reason than only freedom can make security more secure."
I've installed KDE 4.6.2 (from Index of /repositories/KDE:/Release:/46/openSUSE_11.4) and I've noticed that Strigi fails to work. In my System Settings I have?message that Strigi haven't started, although it should (the checkbox to strart Srtigi is active). The process virtuoso-t is constantly suspended in the system.
OS: OpenSuse 11.4 64 bit. Some bugs are resolved in KDE 4.6.2 compared to 4.6.00, so I would like to stay with KDE 4.6.2.
I have installed opensuse 11.2 64 bit on my pc. But I have some troubles with nepomuk and desktop search. I, in system settings pannel, have tried to enable nepomuk and strigi. But strigi show me this error message:
Code: Strigi service inizialization failed, maybe for an installation error. This is strange becouse during my installation I have not seen error messages....
i have a "nepomuk is not running" error message :"Nepomuk Indexing Agents Have Been isabled The Nepomuk service is not available or fully operational and attempts to rectify this have failed. Therefore indexing of all data stored in the Akonadi PIM service has been disabled, which will severely limit the capabilities of any application using this data.The following problems were detected:Nepomuk is not running."and also "nepomuk was not able to find the configured database backend 'redland'. Existing data can thus not be accessed ..."by the way while launching kontactt gives the following errors :mysql server journal with errorsnepomuk service not registered at D Busno ressource agents have been found
how nepomuk is supposed to work on opensuse 11.4 KDE? My nepomuk is active but it always says in "systemsettings" that 0 files are indexed. When I do a search via Dolphin, it never finds a file. It doesn't matter if I select "from here" or "everywhere". I also tried to select the root dir '/' to look for files to index, but still nepomuk says 0 files are indexed and dolphin finds nothing.
Installed 11.3 as new install on Thinkpad T42. I now have a persistent notification "Nepomuk was not able to find the configured database backend 'redland' ... what it means. System seems to be working but desktop icons have grey vertical rectangular box when selected. No objects to select in the boxes though. Previous version had tools available as I recall.
The ?search engine thing 'strigi' is apparently slowing the computer down as it builds its index. The index is already up to about 2GB. This indexing has stared automatically after a new installation of Squeeze. The index is still being built a couple of days after the install. Assume the thing it's indexing is about 167 GB.
Should strigi be left to do its thing, or stopped? If so how?
I first installed strigi as part of nepomuk which came by default with my KDE 4 desktop. I noticed that nepomuk and virtuoso ended up consuming more than 1 GB of memory after a couple of hours, so I disabled it. I gave tracker a try, and after a couple of hours, it was using 300 mb. Left without options I installed the "under archiver" beagle. It has been running for many days keeping all my data indexed and up to date. The best part is that it uses mere 30 mb. The only change I did was enabling user_xattr on my file system, which as far as I know, doesn't affect tracker or strigi. Has anyone experienced this bizarre behavior with strigi or tracker? If so, is there a solution?
I receive following error when trying to enable strigi. "strigi service failed to initialize, most likely due to installation problem" I have searched internet, obviously not good enough, and i have found nothing. Nothing that would work. i have tried installing openjdk-devel as suggested, soprano. And still nothing. I have same problems on both boxes running Fedora 12.
I just upgraded Kubuntu from 9.10 to 10.04. I had problems getting Nepomuk and Strigi to run on 9.10, but finally did. I was using the Soprano backend on that version. Now, it seems that Virtuoso is the new backend, Ok?
I enabled Nepomuk, and Strigi, but the setting dialog in "System Settings / Advanced / Nepomuk" says that Strigi cannot start, could be an installation problem. When I expand the system tray, I see that the strigi icon is listed, and says it's scanning.
Is the warning in the System Settings incorrect, or is Strigi really not working properly? How can I check the status from the command line, and / or restart the daemon so I can read any errors on startup.
Whenever I boot up ubuntu, virtuoso-t, nepomukserver and 8 instances of a nepomukservices process run, and these DO really slow my system a lot, giving slow response of GUI apps etc... I tried asking before, but nobody knew. I'd like to keep trying: How can I get rid of these processes. What starts them up? I want to remove the command that starts them from which ever config file it is.
NOTE: disabling the desktop search setting in KDE settings does NOT disable these 10 executables that slow down your system. Going to KDE control center and disabling nepomuk there isn't the answer. I'd like to know the config file
Virtuoso neopomunk and xorg take most of the cpu while on indexing
Code: 1429 root 20 0 294m 96m 22m R 44 4.9 36:25.55 Xorg 1880 kirys 39 19 530m 47m 20m S 44 2.4 12:50.73 nepomukservices 1786 kirys 20 0 138m 45m 3336 S 30 2.3 15:39.85 virtuoso-t I can understand the complexity of the indexing but the cpu usage of xorg means to me that there is a lot of unnecessary refesh on the interface during the process even if there is no open dialog.
I've already been through all the KDE documentation, and they're outdated when it comes to Akonadi and Nepomuk in Natty.
I've disabled Desktop Search in System Settings, which is supposed to disable Nepomuk. For some reason, nepomukserver and akonadiserver along with about twelve other memory-sucking processes autostart and have to be manually killed after my upgrade to Natty.
I can't simply remove all packages that contain akonadi in the name; one of its dependencies is kubuntu-desktop, which would suck to remove.
I'm not using any of the KDE PIM components (I already removed Kontact, KOrganizer, KMail, Kopete) but some akonadi tasks (~15-20) are always running in the background.How can I get rid of akonadi and nepomuk completely without removing the actual KDE desktop?
Does anybody have strigi krunner plugin work as search-engine and not as lottery? Same goes with search desktop containment - when typing in few letters from the file name, it never founds the file, only displaying ca 10 random files based on content(i guess) instead.
Can anyone suggest a good free Virtualization Software Package that work on OpenSuse with the KDE Desktop, as I need to use Windows for some applications that have not got a Linux equivelant, Namely Reserch In Motions BlackBerry Desktop Manager and the drivers for my Printer and Scanner, so I would also need something with USB pass through. Or if there isn't any free virtualization software that will dowat I want that's free then something that is not expensive that's paid for. I like the look of Parallels Desktop 4 for Windows & Linux but I'm not sure if I would be able to justify paying �54.99 for the ammount of use that it will get?
I installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
The rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
This is an example of the error I receive when trying to do an update via YaST, YaST2, or zypper. Basically, curl is broken. With out it functioning normally, I can't use openSUSE's update mechanism to fix my system. Need to find a way to manually fix / upgrade curl.There was an error in the repository initialization.'Updates-for-openSUSE-11.4-11.4-0': [|] Valid metadata not found at specified URL(s)History:
- Unknown error reading from 'http://download.opensuse.org/update/11.4/' - SKIP request: User-requested skipping of a file - Download (curl) error for