Debian :: Nepomuk Is Using A Shedload Of Data
Oct 25, 2010Using KDE4.4 I see that 4.1GB is being used according to /home/debian/.kde/share/apps $ du -hs nepomuk/ 4.1G nepomuk/
View 4 Replies
ADVERTISEMENT
Debian :: Network Manager Overwrite Resolvconf Vpn Data With Eth0 Data
Jan 23, 2010I'm trying to connect to the VPN of my employer; after fix various minor issues I reach this point in which the DNS entries and the default gateway of the VPN are overwritten with the values of the eth0 device that appears by default. Therefore the vpn is not useful.
View 1 Replies View RelatedOpenSUSE :: 11.2 - KDE Nepomuk Not Activated
May 4, 2010I loaded open suse 11.2 from download nothing works, an error comes up kde nepomuk not activated. And I cant do any thing in yast2, everything comes back to the error.
View 5 Replies View RelatedOpenSUSE :: How To Use Nepomuk And Strigi ?
Sep 12, 2010I have Strigi and Nepomuk indexing files (OpenSuse 11.3), but I do not knowhow to use the results of these tasks.
View 6 Replies View RelatedUbuntu :: Get Rid Of Virtuoso-t And Nepomuk?
May 25, 2010Whenever I boot up ubuntu, virtuoso-t, nepomukserver and 8 instances of a nepomukservices process run, and these DO really slow my system a lot, giving slow response of GUI apps etc... I tried asking before, but nobody knew. I'd like to keep trying: How can I get rid of these processes. What starts them up? I want to remove the command that starts them from which ever config file it is.
NOTE: disabling the desktop search setting in KDE settings does NOT disable these 10 executables that slow down your system. Going to KDE control center and disabling nepomuk there isn't the answer. I'd like to know the config file
General :: What Does Nepomuk Strigi Do?
Jun 12, 2010What does Nepomuk Strigi do? How would I benefit from it?
View 7 Replies View RelatedUbuntu :: Xorg Nepomuk And Virtuos Take Most Of The Cpu?
May 29, 2010Virtuoso neopomunk and xorg take most of the cpu while on indexing
Code:
1429 root 20 0 294m 96m 22m R 44 4.9 36:25.55 Xorg
1880 kirys 39 19 530m 47m 20m S 44 2.4 12:50.73 nepomukservices
1786 kirys 20 0 138m 45m 3336 S 30 2.3 15:39.85 virtuoso-t I can understand the complexity of the indexing but the cpu usage of xorg means to me that there is a lot of unnecessary refesh on the interface during the process even if there is no open dialog.
Ubuntu :: Get Rid Of Nepomuk - Keeps Popping Up On Startup?
May 30, 2010I don't know what program Nepomuk came with. I thought I got rid of it but this keeps popping up on startup [picture attached].
View 4 Replies View RelatedOpenSUSE :: Nepomuk Semantic Desktop Is Not Working?
Dec 28, 2009i have a "nepomuk is not running" error message :"Nepomuk Indexing Agents Have Been isabled
The Nepomuk service is not available or fully operational and attempts to rectify this have failed. Therefore indexing of all data stored in the Akonadi PIM service has been disabled, which will severely limit the capabilities of any application using this data.The following problems were detected:Nepomuk is not running."and also "nepomuk was not able to find the configured database backend 'redland'. Existing data can thus not be accessed ..."by the way while launching kontactt gives the following errors :mysql server journal with errorsnepomuk service not registered at D Busno ressource agents have been found
OpenSUSE :: Nepomuk For Dummies - 0 Files Are Indexed
Mar 12, 2011how nepomuk is supposed to work on opensuse 11.4 KDE? My nepomuk is active but it always says in "systemsettings" that 0 files are indexed. When I do a search via Dolphin, it never finds a file. It doesn't matter if I select "from here" or "everywhere". I also tried to select the root dir '/' to look for files to index, but still nepomuk says 0 files are indexed and dolphin finds nothing.
View 6 Replies View RelatedUbuntu :: Nepomuk Search Service Not Registered At D-Bus
Oct 16, 2010I get this error when starting kmail in new ubuntu 10.10.
View 4 Replies View RelatedUbuntu Installation :: Turn Off Akonadi And Nepomuk?
May 4, 2011I've already been through all the KDE documentation, and they're outdated when it comes to Akonadi and Nepomuk in Natty.
I've disabled Desktop Search in System Settings, which is supposed to disable Nepomuk. For some reason, nepomukserver and akonadiserver along with about twelve other memory-sucking processes autostart and have to be manually killed after my upgrade to Natty.
I can't simply remove all packages that contain akonadi in the name; one of its dependencies is kubuntu-desktop, which would suck to remove.
Ubuntu :: Removing Akonadi / Nepomuk And PIM Generally?
May 21, 2011I'm not using any of the KDE PIM components (I already removed Kontact, KOrganizer, KMail, Kopete) but some akonadi tasks (~15-20) are always running in the background.How can I get rid of akonadi and nepomuk completely without removing the actual KDE desktop?
View 3 Replies View RelatedSlackware :: Nepomuk Slow Down Machine And Used 1Gb Of Disk Space
Jan 14, 2010Quote:
Originally Posted by mcnalu
Nepomuk/strigi slowed my machine to a crawl and used 1Gb of disk space so I turned it off. In my machine is the same thing. Turning it off is a right and wise solution?
OpenSUSE :: Why Is Nepomuk Strigi File Indexer Suddenly Running?
Jul 23, 2010I've had opensuse 11.2 for a long time and I've never seen this nepomuk thing run before. But all of a sudden on startup just now, I got a message that it was running. Why? What is this and should I be worried? Why have I never seen it before?
View 2 Replies View RelatedUbuntu :: Use The Nepomuk / Strigi File Indexing Service - Usability?
Aug 5, 2010how one can use the nepomuk/strigi file indexing service. I started up dolphin, and typed the search string in the upper right corner, and clicked Search. The search result is a long list of files. The one I need is a PDF file. When I select this file, on the right hand side there is the following info: 'Is part of: 15.2 GiB Removable Media' which is clearly wrong, since this file resides in my home directory, which is on a 200 GiB partition. If I double-click this file to open in okular, I get an error message:
Code: Could not open nepomuksearch:/nepomuk_3A_2Fres_...... Reason: Please insert the removable medium "15.2 GiB Removable Media" to access this file I guess this is some old result from nepomuk's cache (in the meantime I have had to repartition my hard disk, and restore my home directory from a backup copy on an external hard drive - but this has been many months ago, so I would expect that nepomuk have had the time to recognize this)
OpenSUSE :: Error - Nepomuk Was Not Able To Find The Configured Database Backend 'redland'
Aug 1, 2010Installed 11.3 as new install on Thinkpad T42. I now have a persistent notification "Nepomuk was not able to find the configured database backend 'redland' ... what it means. System seems to be working but desktop icons have grey vertical rectangular box when selected. No objects to select in the boxes though. Previous version had tools available as I recall.
View 8 Replies View RelatedDebian :: Rescue Data From Damaged Lvm?
Apr 16, 2010I have 6 disks (partitions) combined into one lvm volgroup in my server. The server have been online for a year.
And today, suddenly it hangs. At first, I thought it's caused by network lag, because after a couple minutes the server is responsive again. But then I felt something very wrong. I can't access any file that stored on the lvm.
After some dmesg, fdisk -l and a peek at /etc/lvm/archive/*, I found that one of the partitions used for lvm volgroup is missing. Tried a reboot, and the suspected disk is undetected even in BIOS. Must be caused by bad block on the disk's sector zero or something. I think missing one pv makes the volgroup failed to initiate. So, no volgroup, no logical volume. And I can't access the files on it for sure.
Is there a way I can save/rescue data from other non-damaged disks? I have no luck finding similar situation (and solution) by searching on google.
Debian :: Logon The Data Should Be Decrypted?
Oct 29, 2010i have all my personal data in a separated partition that is xfs, I chose that fstype cause I want to encrypt the data, so, my question is:
1. what steps i have to follow to encrypt all data in that partition?
2. how the process work? everytime I logon the data should be decrypted? when logoff the data will be encrypted? this process is managed by kernel?
I don't have clear the way the XFS and the encryption works, so, I you have some urls o howtos are welcome
Debian :: How To Enable Data=writeback In Ext4
Dec 19, 2010What I've done so far:
1. Edit ext4 entry in /etc/fstab /dev/sda2 ext4noatime,barrier=0,data=writeback,nobh,commit=90,errors=remount-ro01
2. Add this line in /etc/default/grub GRUB_CMDLINE_LINUX="rootflags=data=writeback"
3. Run update-grub
4. Reboot to recovery mode and run: tune2fs -o journal_data_writeback /dev/sda2(did not work) Reboot to a LiveCD and run: tune2fs -o journal_data_writeback /dev/sda2(did not work)
I have kernel 2.6.32-5-686
Debian :: HDD Data Recovery After Clean Install?
Jul 27, 2011I have just upgraded my lenny box to squeeze. I did it by clean-installing squeeze. The installation was successful, but I just noticed that I had forgotten to backup some important files I had on this machine before the installation...
Now, is there any way to recover those files?
Debian :: How To Use Time Machine On Mac To Back Up Data
Apr 12, 2016I want to back up my data on my MacBook Air using time machine. I have a desktop with Debian gnome installed where I want to store my back up data. But I can't manage to find a hard drive to start time machine on.
I have four hard drives installed in my Debian computer and I also want to share them over my home network. I am very new to Debian ...
Debian :: Recovering Data From Deleted Partition
May 16, 2010I was trying to delete a logical drive in windows xp and the damn disk management tool in windows not only deleted my other windows partition but also my linux /data ext3 partition. Now I have a unallocated space in place of these partitions. The data is still there but the entries in the partition table have been removed. So how do I recover my partition. I was trying to use the following tutorial. [URK]
I used the sudo parted /dev/sda -- and then rescue START END command and could get back the /data partition. But it gives me the following error while mounting the partition. mount: wrong fs type, bad option, bad superblock on /dev/sda7, missing codepage or helper program or other error. In some cases useful info is found in syslog - try dmesg | tail or so.
What does this mean. How to I fix this? Also when I try to recover my windows partition using parted it scans for a while and then does nothing. It doesnot ask for writing the lost partition in the partition table. What do I do?
Debian Multimedia :: How To Add EXIF Data From XML To Pictures
Mar 30, 2015I use an android app (Exif4film) for recording EXIF data (only aperture, shutter speed) when shooting an old analog full-manual film camera.
Everytime i take a shot, i dial in the app the shutter speed and aperture settings. Later i want to see if my settings were right.
The app exports an xml file. What software should i use to extract the exposure settings and to put them on the corresponding picture?
Debian :: X File - Massive Mobile Data Usage
May 29, 2015I have been using Wheezy for two years, and everything was OK, so I decided to upgrade to Jessie. In fact i decided to perform a clean install of jessie, so I formatted the partition where Wheezy was installed, and the /boot partition, and I installed jessie in those partitions.
As I had done with Wheezy, I installed jessie in an encrypted LVM, and the installation was ok (well, almost everything was OK, because grub and plymouth were not working, but I will open another topic about it).
First thing I did after installing Jessie was editting sources.list in order to download a few programs (plymouth, firmware linux non free, libdvdcss2, gufw, menulibre). Moreover, I downloaded a few progrmas from the Debian install DVD (flashplugin, VLC, chromium, clamav). i did not perform a dist upgrade because i was not at home, and where I was I did not have a Wifi connection (so I was using my mobile connecion -USB ethernet with an android phone-. BTW I had just performed a hard reset I had not installed any apps after that, so that mobile phone was "clean").
After that, I created a desktop user account, and I rebooted the laptop . When i rebooted, I started to tweak my user account: I edited dconf, and the gnome shell theme; and I started my mobile connection to download three extensions for gnome shell (window list, simple dock and activities configurator. I had used those extensions with Wheezy, and I had never had any problems). Ten minutes after I started the mentioned mobile connection, I reveived a SMS as I had used over 300 MB. Gnome monitor showed that I have downloaded 300 MB, and the android native data usage app showed the same. I did not download any video or music neither watch any videos on youtube, dailymotion..., I did not visit any suspicious web
I had a look at the apt logs and I din not find anything significant (I was using a no sudo user account, so i was not able to perform a dist.upgrade), I had a look at the download, video, music, picture folders and i din not find anything. I tried to check the iceweasel cache folder, but there were so many subfolders I could not check everything.
Debian :: Shell-script Parsing A Webpage And Just Have Some Data
Jun 22, 2015I am looking for ways in where I could parse a web-page, say lURL... and need to parse data of the web-page. URL....Now, as can be seen the page has lot of information. I just need/want to only take the names of the packages rather than version numbers.
View 4 Replies View RelatedDebian :: File Integrity For Backups Of Home Data ?
Nov 17, 2010I'm currently backupping our home data (pictures, videos, our CDs ripped to FLAC which I spent a lot of time to tag accurately ), totalling almost 300 Gb, on 2 external USB drives, one of which is meant to stay at a friend's. I left the factory msdos filesystem as it was, thinking it could be useful to be able to connect the drives to a windows machine with no problems. It's certainly useful to have «normal» data that I can take with me e.g. when visiting my family.
I'm simply using rsync manually, checking for suspicious changed or deleted file before commiting the change. I do that every 2 weeks or so.
Now I want to add a file integrity management to my backupping scheme: I want to be able to check that new data I'll be committing has not been tampered with (integrity check before updating tags on my main drive), and I want to be able to check that backupped data is still sane on my USB drives, especially if I need to recover from data corruption on my main drive.
Since I'm essentially mirroring the data, I thought run of the mill integrity software would let me just rsync the integrity database, and I'm done.
But after browsing through the docs of tripware, afick and the like, I fear they work only with absolute paths, so the database for my main drive wouldn't work for my USB drive, that's mounted elsewhere when I plug it in, obviously.
So, I feel I'm missing something. It looks to me I'm trying to solve a very common problem, how do people do it?
Did I miss a file integrity software that works with backups?
Is there a trick like using a symbolic link pointing to whatever file hierarchy I want to check, and have tripware/afick/... monitor that link?
Should I run a more elaborate backupping system than plain rsync? Which one? (Storebackup for instance looks promising since it involves md5 sums, but it's targetting a completely different problem, and I'm not sure I can use it at all for what I need.)
Debian Configuration :: Data Pool - ZFS Disk Labeling
Jan 31, 2016I created my data pool using /dev/disk/by-id and things went well. a recent view of zpool status however showed /dev/sdb and /dev/sdc being used instead. how can I be sure a rearrangement of my disks wont cause error?
View 2 Replies View RelatedDebian Multimedia :: How To Create DVD Data From Console In Jessie
Nov 25, 2015i need create a DVD data from shell.I try this but nothing: # genisoimage -V "DVD1" -R -hide-rr-moved -J DVD1_Shapter1_8/ | wodim -v -eject dev=/ dev/dvd1 -the folder only contain 8 video in .mpg extension,
View 1 Replies View RelatedDebian Multimedia :: Evince - Entering Data Into PDF Files?
Oct 15, 2010Some PDF files have a functionality that text and amounts can be filled in some parts of the file, after which it can be printed (most of the times NOT saved). Our tax authorities have these files as well, you can download them, fill in text and amounts, it even counts it for you, and you can print and send.
Unfortunately, I can't use that functionality in Evince (running Squeeze). I tried this with Adobe (also in Squeeze) and it didn't work either. In Win it does work, but of course I would like Debian to be "allround" Can it be that some application must be installed to use this function?