Fedora :: Wordpress : Access To A Directory Is Denied?
Nov 24, 2010
I would like to install wordpress on fedora 14.so I downloaded the packages needed to install apache+php, and I saw the site is located in the directory /var/www/html.I unzipped the wordpress archive to this directory but when I enter the address "http://localhost/wp-admin/install.php" in the browser (firefox launched from the command line as root) I have the error message : ****************************You don't have permission to access /wp-admin/install.php on this server.****************************do you know what thing I have to do in order to make the directory available?
View 2 Replies
ADVERTISEMENT
Nov 21, 2015
Iceweasel will not start, saying :
(process:12904): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Error: Access was denied while trying to open files in your profile directory.
but only for my userid. What home directory resources are required to start?
View 3 Replies
View Related
May 14, 2010
When login through root on HP-tru Unix server, I am trying to access a directory, it is saying "Permission Denied".. Also, an sh file is also not able to execute through same root access..I have checked the permission of the directory as well as for sh file through ls-ltr.. It is also fine.. Root System rwx-rwx-rwx--What could be the possible cause, and how to correct it..
View 1 Replies
View Related
Jun 27, 2010
I'm trying to get wordpress to work with lighttpd and my home test server... <name>.dnsalias.org as my IP is not static... When I install wordpress ( via apt-get ) and set it up through install script like this:
bash /usr/share/doc/wordpress/examples/setup-mysql -n wordpress <name>.dnsalias.org It is accessible from outside of my network but not from local one where the sever ip is 10.0.0.200 From outside it is using correctly domain <name>.dnsalias.org but from inside when I try to use ip 10.0.0.200 from other pc on net it will not work..a s it still using <name>.dnsalias.org in all links... Also I would like to have it in <name>.dnsalias.org/wordpress as I have another test site in <name>.dnsalias.org/<test_Site> which by thee way works from inside and outside of my network.... its just wordpress ...
I have followed this guide: [URL] but its for apache... I spend whole night searching for some solution and now I'm dead tired and you are my last hope ...( ....Obi Wan Kenobi ) So does someone running wordpress in setup like I described above, if yes
View 2 Replies
View Related
May 22, 2011
I can't make write changes to .php files in my Wordpress editor, although I have already chmod -R 777 the directory. here is what ls -al says:
Code:
[root@localhost ~]# ls -al /usr/share/wordpress/wp-content/themes/purple-swirl/
total 12
drwxrwxrwx. 3 root root 4096 May 21 17:10 .
drwxrwxrwx. 4 root root 4096 May 21 17:10 ..
[code]....
View 6 Replies
View Related
Apr 19, 2010
To automatically upgrade i need to connect to a FTP server. Now do i have to allow wordpress access via apache to the machine it is on or do i have to create a ftp server on another machine with the files on it?
View 2 Replies
View Related
May 24, 2010
My program tries to open serial port on Fedora 12, and shows "Access denied" on Open Port operation. The same program runs successfully with root rights. What can I do to get COM port access as regular user?
View 2 Replies
View Related
Nov 7, 2010
I am somewhat new to Fedora, only having F13 for 2 months and F12 about a year ago on my dieing AAO. Anyways...I am trying to get the Apache web service up and running. Type in http://localhost and I get the Apache welcome screen. Now I try to add my webpages to /var/www/html/ and it says Error Moving File: Access DeniedI tried to find where to login in as root and find nothing. I am VERY unfamiliar with command line prompt other than for the yum installs
View 7 Replies
View Related
Dec 3, 2009
Since FC6, NFS became very finicky and seemingly causes servers to randomly denying mounts from some terminals but not others, with all exactly the same new FC installation and exactly the same hardware - crazy!. The only difference is hostnames of the terminals trying to mount NFS volumes on the server and I made sure that /etc/hosts on all terminals and servers contain each others ip addresses and hostnames. I always uninstall SELinux which is truly a huge pain in a corporate environment. Is there ANY way I can relax the NFS authentication on the server in order to make sure clients can mount volumes?
e.g. the following is encountered often, with sometimes crazy situations that clients can only mount nfs volum es from the server after I first boot the server and then ALL the terminals. It is painful as you might agree! Other way round, no go, client will not mount until server is booted and then client booted.
In this case I really prefer windows lackey security. It works. Never mind how crappy windows is, at least I don't have diabolical access problems on servers.. NFS used to be very nice about 6 years ago but truly sucks recently imo. /]# mount -o soft -t nfs nfsserver:/public /xfer mount.nfs: access denied by server while mounting nfsserver:/public
View 1 Replies
View Related
Apr 4, 2010
I have same problem with *.bin files.When I try to install software from *.bin file I see error:
Code:
[andrew@notebook Programming]$ ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
bash: ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin: Access denied
[andrew@notebook Programming]$
When I run command ls -la I see this:
Code:
[andrew@notebook Programming]$ ls -la installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
-rwxrwxrwx. 1 andrew andrew 82624164 Апр 4 16:39 installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
[andrew@notebook Programming]$
This error exist if I try to install this application with root access. What I mast do for fix this error?
P.S. I have Fedora 12 x86_64 on my notebook ASUS M51Sn.
View 6 Replies
View Related
Jul 2, 2010
My postfix is ok with receiving emails but i can send mail to my domain only [URL] When I want to send to other domains i receive this error (in the maillog):
Quote:
postfix/smtpd[14172]: NOQUEUE: reject: RCPT from 93-46-46-73.ip106.fastwebnet.it[93.46.46.73]: 554 5.7.1 <giannileggio@shoppeo.com>: Relay access denied; from=<info@sampledomain.com> to=<giannileggio@shoppeo.com> proto=ESMTP helo=<[36.234.52.97]>
it is the same via thunderbird or via telnet. This is my configuration
Quote:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
[code]....
I used 'sampledomain' instead of my real domain
View 2 Replies
View Related
Jan 18, 2011
i have configured mail server with postfix with dovecot with no encryption:When connecting with Thunderbird imap is working fine. when sending email from another domain to this domain again it is fine. but when i want to send mail frommy domain to another it gives me error and this is /var/log/maillog:
Code:
Jan 18 18:23:09 srv1 postfix/smtpd[3991]: NOQUEUE: reject: RCPT from unknown[95.81.67.120]: 554 5.7.1 <Recipient email>: Relay access denied; from=<Sender> to=<Recipient email> proto=ESMTP helo=<[127.0.0.1]>
[code]....
View 1 Replies
View Related
Sep 5, 2009
i have problem with samba share everytime when i want to browse shared folders on fedora machine from windows i always get this msg (SELinux is preventing samba (smbd) "getattr" to /proc/fs/nfsd (nfsd_fs_t).)here is my selinuxlog
Summary:
SELinux is preventing samba (smbd) "getattr" to /proc/fs/nfsd (nfsd_fs_t).
%
View 6 Replies
View Related
Jan 19, 2011
I've just upgraded my laptop to Fedora 14 and installed LAMP on it for a test environment. I've followed the official instructions to install but seem to have a problem that I didn't have on F13 or Opensuse. Each time I try to access index.php on localhost I get a permission denied message and an SElinux alert. I have tried 7 different solutions on various forums and just can't view anything in a browser.
/var/www/html has been set to chmod 777
/var/www/html/index.php has also been set to chmod 777
A standard user can definitely read and write to the above files/folder. Until I commented it out the Welcome/Test page was working perfectly.
View 5 Replies
View Related
Mar 26, 2010
I'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
View 4 Replies
View Related
Aug 24, 2010
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies
View Related
Mar 11, 2010
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies
View Related
Sep 11, 2010
i put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
View 7 Replies
View Related
Aug 4, 2009
I have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies
View Related
Jul 21, 2009
I have a strange problem when I do SSH to a FEDORA9 based Linux Server.
[Code]....
When I login using "adah" username in TELNET I am automatically directed to my home directory at location "/media/disk-1/home/adah". But when I use SSH to login using the same username I get the following message Code: Could not chdir to home directory /home/adahaj: Permission denied
View 7 Replies
View Related
Dec 2, 2010
I have recently been attempting to install GASP for Python. After several attempts I finally managed to find the .tar file, since yum's GASP was severely outdated. After downloading, I have to extract the file to /usr/libexec/perf-core/scripts/python/, and once I tried to do so in the Ark package manager, nothing would extract after several attempts. I then tried to move it in the Dolphin FileBrowser and got this error message:
Access denied to /usr/libexec/perf-core/scripts/python/gasp-0.3.3.tar.gz.
After much googling and FAQ searching, I have had no results.I am running Fedora 14 KDE build,and have been doing so for about about a week,without any previous Linux experience, so it is probably user error.
View 3 Replies
View Related
Aug 25, 2009
I've got samba setup to the point where I'm sharing a folder successfully with my windows PC but I can't seem to write to the folder via windows. I keep getting "access denied" errors. code...
I've logged in from Windows with the tomcat user.
I can browse the directory but can't create any files or folders.
Not sure why? code...
View 5 Replies
View Related
Aug 25, 2009
Does anybody know if there is a quick and easy way to simply disable samba security to avoid "Access Denied" errors when trying to access shares via Windows XP?
View 2 Replies
View Related
Jun 18, 2009
But I can't upload files or pictures all the time.Everytime I tried to upload , it tips me : "can't create file or folder ...... . is its parents folder writable by the server?"Now it's considered as a bug.But I tried 3 methods introduced on the net . But none of them worked. They are : 1: change the folder permission to 777 , not work for me.2: change the URL to "wp-content/uploads" not "/wp-content/uploads" , not work for me.3: use full url not "wp-content/uploads" also not work.
View 8 Replies
View Related
Nov 17, 2008
I have configured apache on my Centos 5.2 and it is working well. I want to have a sym link of my docs directory in /root/ in the apache root directory. I used ln -s command to create this sym link. But when I tried to access this I get the following error:
You don't have permission to access /docs on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
How can I access this directory in apache. i use apache 2.0.63.
View 1 Replies
View Related
Nov 25, 2010
I installed an Apache web server on Fedora 13. My website is built on PHP. When I try to access the web servers particular directory it take too much time to load.I have added index.php in DirectoryIndex statement also in the httpd.conf file. The home page of my sites has 150 kb image file.
View 2 Replies
View Related
May 30, 2010
On RedHat 5 64-bit.I have a group that requires read-only access to the /var directory.I believe someone mentioned SGID and ACL stuff, and I've been researching this solution, but I wanted to check with you all first to ensure there wasn't an easier way to do this. Basically, I just need folks that belong in this certain group to read the contains of any file/directory contained within /var.
View 5 Replies
View Related
Oct 22, 2010
I have created user, group, gave permission chmod and chown with -R option. But when i try to enter into the directory for that created the user and group, I can not enter into.
View 4 Replies
View Related
Dec 17, 2009
I ran a yum update a couple days ago, and it completed without error. Today I tried logging into Wordpress, and was unable to do so. I get a 403 error. Further investigation shows that I can no longer run any php scripts for Wordpress or Gallery. A look through yum log shows the following packages were installed:
Dec 13 11:22:52 Updated: mysql-libs.i386 5.0.88-1.fc10
Dec 13 11:23:57 Updated: qt-mysql.i386 1:4.5.3-9.fc10
Dec 13 11:37:40 Updated: mysql.i386 5.0.88-1.fc10
Dec 13 11:37:47 Updated: mysql-server.i386 5.0.88-1.fc10
There were no updates to apache, php, or SElinux, so I am at a loss to explain why apache is no longer able to run php scripts.
View 1 Replies
View Related
Apr 7, 2011
Is it possible to have a password protected ftp directory along with anonomus user access
i mean 2 say
when people visit my ftp link ie
ftp//server name
then can see all the directories like
text
stickers
word files
personal
They can acess all the directories and can see contents but when they go to my personal directory they should be prompted for a password.
View 9 Replies
View Related
