OpenSUSE :: Apache Access Denied Despite (or Not) Proper Configuration
Jul 1, 2010
My first message on this forum, I'm a new comer in the Suse world (after 10 years of debian, ouch) I really like this distro so far. Fast, clean, simple. I got an "acess denied" issue with the apache configuration though. I've installed apache through yast and configured it with yast-http. Permissions are okay and a index.htm file is in the directory.
I won't ask for a direct answer cause everything can be found on the wiki. However, I'm surprised that configuration files are not erased when the related software is uninstalled. I've spent the afternoon trying to make it work so I guess the config files are spoiled right now. I tried to erase all the config file but can't find the yast-http ones, so it does not launch the wizard like the first time. yast-http also warns about my network ruled by NetworkManager, and that it could not run properly with it, how come?
View 4 Replies
ADVERTISEMENT
Apr 12, 2011
I have an apache installation with /var/www/bob as the document root and the only site served up. I have bob as the directory's owner, and he is able to upload his files to that folder via ftp (vsftpd on the server). When a browser tries to access the pages, it simply gets a 403 forbidden. The problem occurs when apache2 tries to access the files bob uploads. The www-data user (Apache daemon) gets permission denied when I try to cat bob's files in the shell, so it's purely a permissions issue. What I can't figure out is how to give the Apache daemon the ability to read bob's files while also making certain it does not have the ability to modify any of them.
View 1 Replies
View Related
Jan 19, 2011
I've just upgraded my laptop to Fedora 14 and installed LAMP on it for a test environment. I've followed the official instructions to install but seem to have a problem that I didn't have on F13 or Opensuse. Each time I try to access index.php on localhost I get a permission denied message and an SElinux alert. I have tried 7 different solutions on various forums and just can't view anything in a browser.
/var/www/html has been set to chmod 777
/var/www/html/index.php has also been set to chmod 777
A standard user can definitely read and write to the above files/folder. Until I commented it out the Welcome/Test page was working perfectly.
View 5 Replies
View Related
Sep 14, 2010
I cannot install files from source (tar.bz, tar.bz2, tar.gz, etc) my latest attempt began at tuxfiles. following the 'tutorial', if you will, I managed to unpack the files; but when it came to the ./configure step, I got the following error:
zsh: no such file or directory: ./configure
Here I figured different distros, slight variances, so instead I tried putting a space in the command (./ configure), and got this error.
zsh: permission denied: ./
So finally I tried both ./configure and ./ configure as su and I still got the same errors... this is the same problem that I've always had when installing from source. I am using Fedora 12.
View 6 Replies
View Related
Mar 11, 2010
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies
View Related
Apr 14, 2010
I keep receiving the error message in the title above whenry to enterebmin.abc.com/webmin. I'm on Ubuntu 9.10. Other errors I'll receive are "You do not have access to any Webmin modules". Wondering if anyone knew what settings our permissions on files I could change to avoid these error
View 1 Replies
View Related
Feb 2, 2010
I run a mediaserver on Archlinux, working perfectly (or almost). I have set up NFS v3 and that worked for me on these clients:
- Debian Lenny
- Archlinux 64bit
Now I've upgraded my Lenny-box to squeeze and I see that 2 of my 3 shared folders (tdone and twatch) are mounted like they should and the third one (media) doesn't come up. A 'mount -a' as root gives this error: mount.nfs4: access denied by server while mounting (null) My relevant fstab-lines:
[Code]....
how I can go about debugging this?
View 1 Replies
View Related
Mar 10, 2011
In a squeeze box, I installed awstats and it's working like a charm. Its cron job update the awstats database every 10 minutes (as it runs as root). But I would like to be able to update the statistics from the browser as well. So I setup everything as required and I gave "read" access to "others" to every apache log file. Now, a couple of questions came to my mind:
1. Am I compromising server's security giving "read" access to "others" to apache log files?
2. Instead of giving "read" access to "others", I could add www-data user to adm group (as apache log files are owned by root:adm and permissions are rw-r----). Is this more secure than giving "read" access to "others"? 3. If the option would be giving "read" access to "others" at the end, a log file would be owned by root:adm and its permissions be rw-r--r--. As apache rotates its log files, when Apache create a new log file, does it preserve the permissions (rw-r--r--) or create it with the default permissions (rw-r-----)?
View 1 Replies
View Related
May 23, 2011
Having some memory loss i think (in my head not my pc). I have set up apache before , then changed to dsl in the last week and cant seem to get this new modem/router to work. i can get the loopback address to work, as well as the network ip. can NOT get my other machines to hit the server on the network .
also no connection from outside the network from port 80. my modem is a motorola (att) ,apache2 on my toshiba laptop, amd x2, 3gigs ram.
View 9 Replies
View Related
Aug 21, 2010
I have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
View 6 Replies
View Related
Jul 29, 2010
I want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
View 1 Replies
View Related
Apr 11, 2010
OpenSuse installed with Windows 7 installed first. I have successfully set up GRUB to boot both OS.
Problem description:
When trying to download (save) files into ROOT/WINDOWS/E message warns me that its not possible to write requested file.
how to allow Opensuse to write files into NTFS
View 6 Replies
View Related
Oct 18, 2010
I have a back up hard drive I cannot access. When I try to move folders there I get the message 'access denied'. It is probably a simple permissions problem.I need some help to get permission to access it.
View 7 Replies
View Related
Feb 18, 2011
After some update every time I run update from the Yast or zypper I frequently get errors like the following (with zypper):
Code:
Permission to access 'http://download.opensuse.org/update/11.2/rpm/x86_64/unscd-0.43_0.45-2.1_0.2.1.x86_64.delta.rpm' denied.
Abort, retry, ignore? [a/r/i/?] (a):
If I type <r> then download continues. Is there any way to fix that or at least make it retry automatically?
View 3 Replies
View Related
Mar 13, 2010
I am pulling my hair out once again after trying for over 15 months off and on to get a tv tuner working under linux. I have just received my new tuner card which I thought was supposed to be easy to run, a HVR-950Q, no luck yet. But first I am trying to use something called mysql (new to me), for mythtv and [I] keep getting
# mysqladmin -u root password ma
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)
View 9 Replies
View Related
Jul 31, 2011
I am new to opensuse 11.4. I am trying to copy the flash 11 beta file (libflashplayer.so) into the lib64/browser-plugins folder but i get 'Access Denied. Could not write to (destination).
View 4 Replies
View Related
Nov 9, 2010
I think I screwed up my Administrative username in mysql.
mysql -u root mysql
ERROR 1044 (42000): Access denied for user ''@'localhost' to database 'mysql'
Can I just copy all the files in /var/lib/mysql >>reinstall MySQL >> copy all the old folders into the new /var/lib/mysql ( while MySql is off)
View 9 Replies
View Related
Mar 9, 2010
I'm trying to configure Apache, however I have some problems..
linux-top:~/appli/httpd-2.2.14 # ./configure --prefix=/root/appli/
checking for chosen layout... Apache
checking for working mkdir -p... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
Configuring Apache Portable Runtime library ...
checking for APR... reconfig
configuring package in srclib/apr now
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
Configuring APR library
Platform: i686-pc-linux-gnu
checking for working mkdir -p... yes
APR Version: 1.3.9
checking for chosen layout... apr
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/root/appli/httpd-2.2.14/srclib/apr':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
configure failed for srclib/apr
View 9 Replies
View Related
Apr 28, 2010
I haven't been able to get a working X11 environment on a Dell PowerEdge 1850. Using YaST without an X11 environment sucks particularly when you are trying to configure Apache. In addition, the Apache configuration files seem to have changed significantly since the last time I configured Apache on a SuSE Linux distribution. Where can I find good documentation on editing suseconfig files to ensure that I get the modules installed that I need for the collaboration tool that I'm installing?
View 2 Replies
View Related
Mar 26, 2010
I'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
View 4 Replies
View Related
Aug 24, 2010
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies
View Related
Sep 11, 2010
i put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
View 7 Replies
View Related
Aug 2, 2010
I have accidentally configured compizconfigure settings manager to activate the shift switcher whenever i press the left mouse button. because of this now i cant do any work as the shift switcher is activated whenever i press the left mouse button
i tried to use remove compiz by typing this command in the terminal: sudo apt-get remove compiz the terminal said that it has been removed but but it is still in the system>>preferences menu and the shift switcher still gets activated when i press the left mouse button.
View 9 Replies
View Related
Apr 10, 2011
I tried installing gnome-desktop, which wiped out /etc/resolv.conf (and ultimately failed to install). A comment was left in resolv.conf saying "do not edit..". Where is the proper place to list nameservers in debian?
View 2 Replies
View Related
Aug 4, 2009
I have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies
View Related
May 23, 2010
How do you configure the firewall to allow external web access (it's a LAMP server) and internal access for samba shares ?
View 6 Replies
View Related
Jun 22, 2010
I want to be able to created directories and upload files (images mostly) via a php web page. The directory structure is a throwback to windows and I really really don't want to have to change it because there are so many files/links already there.
/cust/cust_name/site/version/web (all html/php files go here)
I want to be able to edit the files with a 3rd party tool (SSH based). These are small orgs, like my church, local community club, sports team, etc., so file ownership needs to sync with the editor, not apache.
[Code].....
View 5 Replies
View Related
Jan 13, 2011
I am administoring a few websites and the latest website to be deployed has a few "unable to check htaccess file, ensure it is readable, referer: " errors in the apache-error log.
That is fine, becuase the directory doesnt contain a .htaccess file.
Is there a setting whereby I can turn off this error ?
I dont want to turn off checking for .htaccess files because some directorys have this file and use it.
View 2 Replies
View Related
Aug 7, 2011
I'm trying to setup a wireless AP with my old asus eeepc, so it can act as a repeater to connect my android device on the other end of the apartment. I've already created the Wireless Access Point using hostapd. It took very little configuring, just changed from mode 'a' to 'g' and changed the channel from 60 to 1 and It was all set. Next I setup a dhcp server. Also simple enough using yast.
Up to this point, I was able to connect my android device to the newly created wireless network. However It doesn't have internet access. I guess I have to configure iptables for this, but I find it incredibly confusing! Here are a few specs to help with any examples: The laptop is connected to the internet through eth0 with IP 192.168.2.120 Hostapd is using wlan0, and I'm pretty sure it created mon.wlan0 So, to sum up, when I connect my android device to the network I can, for instance, see what ever pages apache is currently serving on the laptop, but can't access the internet.
View 1 Replies
View Related
Jan 20, 2011
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
View 3 Replies
View Related
