OpenSUSE Hardware :: Use ATI Drivers For HD Cards?
Dec 15, 2009
I have a computer with a Radeon HD 3200 graphics card and I am trying to use the ATI drivers for the HD cards because according to the wiki it is for HD 2000+ cards. After installing via the RPM and using aticonfig/sax2 to configure the card I have no X.org after boot/init 5 and in xorg.0.log. I get the following output regarding the driver
[code]...
I have followed the troubleshooting guide in the wiki and still no go. "We must plan for freedom, and not only for security, if for no other reason than only freedom can make security more secure."
View 5 Replies
ADVERTISEMENT
Jul 17, 2010
I would like to know the best way to swap out video cards from ati to nvidia. For example. In windows, I would uninstall the driver, switch the cards, boot into a low VGA windows session and install the new drivers, reboot done.
In sues, I'm wondering if I uninstall the drivers, after rebooting I might loose my Gnome desktop. And I guess at that point I'd be looking at a blinking cursor?
View 3 Replies
View Related
Jul 15, 2010
Like a guy earlier today report a problem with Opensuse 11.2 working fine on his machine but 11.3 is not. I have somewhat the same problem. The default installation freezes randomly. I have seen this error before with Intel video cards but never with NVIDIA. Right now, I'm using VESA in failsafe mode and trying to install some drivers from this repo.
I'll try and find a fix for this. (Hope their is one)BTW, can anyone confirm when the official drivers for NVIDIA cards are coming out?
View 8 Replies
View Related
May 30, 2010
I'm looking for drivers for a some ethernet cards: 02:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec: 8139] (rev 10) Macronix, Inc. [MXIC] MX987x5 [10d9:0531] (rev 25) and Dlink dfe-538tx
I found some drivers at: Realtek These are for the Realtek card. They are: UnixWare 7.1.x and SCO Unix 5.0.X Which one would I use for Debian Lenny? I couldn't find any for the Macronix I found this site for dlink: ftp://ftp.dlink.com/NIC/dfe538tx/Driver/Linux/
[Code]...
I'm not sure what to do with the dlink. I'm not familiar with Linux drivers. I don't know if this is the right way to go or if there are drivers for linux already.
View 3 Replies
View Related
Sep 14, 2010
I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between:
nvidia proprietary driver
ati proprietary driver
generic driver
Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers).
What would be the steps to make this (semi-)automatic and avoid restarting X?
Where could one find examples of such scripts?
View 4 Replies
View Related
Jan 4, 2010
For those of us who were stung last year by ATI's decision to drop support for <= R500 series cards from their closed source, or proprietary driver (known as the FGLRX driver), we are now forced to use the opensource ATI XORG driver. This is not as bad as it sounds, as in doing so, ATI has released a lot of the hardware specs on these older cards and the opensource driver has improved dramatically in the last year as a result.
Ubuntu includes both the ATI and the FGLRX driver install capacities in recent releases (since Intrepid(?)). If one can install the FGLRX driver, you should be able to do this by choosing System>Administration>Hardware Drivers and choosing to activate the ATI drivers; or you can manually install them using this guide: [URL]
However, if you have a card that is or below the R500 series (i.e. not R600+) DO NOT install the FGLRX drivers - you will break your X server (video display). If you don't know what series chipset you have, try the following:
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
[Code]....
If you're like me and need a production machine, but just want updated drivers, try this link: [URL]
To add the PPA (Guide): [URL]
These are fairly easy to remove (as described on the site); just remove the PPA from your Software Sources and downgrade the drivers.
View 9 Replies
View Related
Oct 10, 2010
Compiz works out of the box in Live systems when run on computers with integrated Intel graphics chips.Is there a way to make it work on system with Nvidia or ATI chips? Even if I have persistence enabled, downloading and installing the drivers does not carry over to the next session and it again throws up a "restricted drivers available/needed" prompt.P.S The purpose of doing this is for demos. Plugging in a live system and letting people play with whizbang effects is the best way to convert them
View 9 Replies
View Related
Jan 29, 2010
I have dell inspiron-1545 laptop.I installed rhel5(downloaded from torrent for free),kernel (2.6.18-8el5xen).i got a driver cd from dell containing rhel drivers for audio,video,network.i tried to install those drivers but could not.it asked for dkms 2.0 which i installed.but even now also some errors are coming(like dependencies missing etc.).so no internet ,no sound,no video on my laptop.
Some command outputs:
When i boot every process come OK except(cpu micromodule failed.fatal error and hub port status failed). i think these cards have not been detected.
View 1 Replies
View Related
Jun 20, 2010
How can I install xserver-xorg without all the unnecessary drivers for video cards / peripherals I do not have on my system?
View 2 Replies
View Related
Dec 1, 2010
I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?
View 1 Replies
View Related
May 9, 2011
after few years being limited with my pc configuration (windows OS) I realized that linux or it's distributions is the best invention in 21 century. And finally I am starting use it. openSUSE 11.4 installaition succesful, I updated it and it looks I don;t have any problems, but I got few questions.
1. How install older version of mozilla firefox internet browser here? I can't install some plugins because it's a firefox beta 12 version, for example. I am quake fan, o I like play quake live, but i can't install quake plugin, because my firefox is beta version.
2. Does I got all drivers instantly installed to my mashine? ATI video drivers, sound drivers ect??
3. Are there any How-To guides which can teach me, how I can improve my desktop? gadgets, 3D desktop ect...?
View 5 Replies
View Related
Sep 4, 2010
I verify in Intel site that my Intel'drivers are outdated, because Dell Suport is slow, so how do I update them in Opensuse?
Do I use Virtual Machine or try through Wine?
View 4 Replies
View Related
Sep 12, 2010
I have recently obtained a dell 725 printer but it the drivers do not seem to be available when I try to configure it.
View 3 Replies
View Related
Apr 30, 2010
How can I get opensuse 11.2 to automount sd cards? Until recently I had SD card reader of my laptop turned off in BIOS, now I turned it on and hardware wise it is working fine (I can mount SD cards manually) - but how can I get opensuse to mount the cards automatically upon insertion? (is working for other media) It probably something trivial, but I missed it...
View 9 Replies
View Related
Aug 6, 2011
I am a new user to opensuse, coming from ubuntu. I have a usb to vga external video card that allows me to plug in an external monitor to a usb port.Tritton SEE2 UV150 Looking around there is a deb file available for ubuntu and the sources are on the suse build service. Though it does not say its available for suse. So im wondering if anyone else has used one of these devices and/or knows how I can get it to work. The pages i have found related are here:
[URL]
View 4 Replies
View Related
May 5, 2010
I've got an ACER Veriton 7600GT, with an internal Intel 82865G, which drives the main monitor and a Radeon 9250 which drives a second monitor (on its first port).The configuration seems to kill many live cds but not opensuse - that's the good news. The bad news is that, if I've understood this; Configuring graphics cards/Dual Head Mode - openSUSE, it should be detected and started in clone mode - it isn't. Running sax2 doesn't help (and that's the first thing in the XRandR instructions too. I've yet to see my second monitor so much as flicker. I would like to see this working on the live cd before I commit to installing opensuse.
View 9 Replies
View Related
Jun 11, 2011
I am considering an OCZ RevoDrive SSD that takes the form of a PCI-Express x4 card. I have not been able to find compatibility or support information for Linux, though apparently it works OK under Windows 7. I want to make this a system / boot drive.
View 3 Replies
View Related
Sep 10, 2011
i just upgraded my pc to 12.1 milestone 5 when i went to play my fav game (Xonotic) it was all laggy at 1 fps. I realised the graphics card app wasnt working anymore.Can any 1 fix PS and i had to go on failsafe too. PS2 milestone 5 workes flawlessly apart from the gnome 3 bug at startup
View 2 Replies
View Related
Jan 5, 2010
I've installed OpenSUSE 11.2 on my computer. Well, 11.2 is great and all, but issuing ifconfig yields only loopback device. Now, I have OpenSUSE 11.0 installed on my notebook; the system works fine, although I had that very problem initially and had to recompile the kernel in order to make it recognize my notebook's ethernet card. My question is: If I upgrade my notebook's 11.0 up to 11.2, am I sure to have my files intact? Is 11.2 sure to "see" the ethernet card?
View 2 Replies
View Related
Dec 2, 2009
1. I run Suse 11.2 with two sound cards , one HDA comes with motherboard and second is USB, which I use for skype and talking. In YAST everything is fine the motherboard card is marked as prime card and the usb card is marked as second. But often when I log in alsa decides that second card is main and I have to pull out the USB card, run command "rcalsasound restart" and put the USB back afterward. It is a way that to be fixed in the way that alsa remember my choices forever. 2. The other problem is that from time to time the sound suddenly dies and I have to bring it up with rcalsasound restart again.
But I have to admit that their significant improvement with managing sound with PulseAudio.
View 6 Replies
View Related
Mar 14, 2011
which chipsets are on the PCi and PCie cards, EW7722in and EW-7612PIn, and whether they can be made to run on a linux system. My system is recent (Linux home 2.6.37.2-0.6-default kernel) Do they have the same chipset as EW-7711In, which I notice has explicit linux support? Now this was on the 3/03/2011, and I had given up getting any kind of useful support, but I got a reply today. I hope they wont mind if I quote them:
[Code]...
View 4 Replies
View Related
Mar 17, 2011
I am finding a lot of issues with flash in 11.4 release. As I know it is flash issue, because some people after updating flash on 11.3 got the same problem.
Flash seams to be crashing or/and slowing down web browser. After trying to figure out where is the problem, i found that:
1) removing SLI helped a little bit
2) updating to beta (270) nvidia drivers helped a little bit (moving window with flash animation from one screen to another one that is connected to different graphic card does not crash the browser anymore)
But still the problem exists.
For example, sometimes when i minimize the window with flash animation and i open new window (e.g. with spreadsheet) and move it on the same place where was previous window with flash, I can see this flash animation as a background of the new window....
Also, when i am moving the window with flash around, the flash disappears or gets gray.
Sometimes, ..... does not load the movie, but if i open the movie in VM windows, it works fine. After reloading Xwindows it works for a while also in opensuse.
View 4 Replies
View Related
Apr 10, 2010
I've tried googling, but can't manage to figure out how to change the priority order of the sound cards in yast. From yast > hardware > sound, I can see the (default) internal audio from the motherboard, and I can see the usb headset that I would like to be using as the default. How should I go about changing the priority order on these devices?
View 3 Replies
View Related
Jan 7, 2011
I've seen several threads in Ubuntu regarding implementing vaapi/xvba enabled media players for ATI GPU rendering. Does anyone know of any precompiled rpms for 11.3 (or tips for building on opensuse). I've installed Hellgasts xvba-video-amd rpms from the build service. I wasn't able to successfully build my own mplayer-vaapi from Index of /~gbeauchesne/mplayer-vaapi.
View 3 Replies
View Related
Feb 7, 2010
on my PC I have 2 sound drivers, one from the mainboard (AC97) and one PCI card (ES1969). Because the mainboard sound path did not recording, I installed the PCI sound card and with 11.1, I managed it to play and record all audio data. With 11.2 the PCI sound path plays the system sounds (suse start-up or shut-down sounds) but not the streaming audio data (skype, flash player). But these are played by the mainboard audio instead. The audio-tests from yast->hardware->sound work for both paths. How should I configure the system to redirect the audio streams to the desired (PCI) audio path? The PCI audio is set as primary sound card and is not muted.
View 2 Replies
View Related
Feb 9, 2010
I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
View 9 Replies
View Related
Jul 14, 2011
I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.
Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.
I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.
Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.
I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.
In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.
As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.
View 9 Replies
View Related
Sep 4, 2010
I am using open suse 11.1 in my acer emachine laptop. Everything is okay except Network cards are not working. It says that firmware is missing or kernel problems. My network cards are Broadcom network cards. How can I fix it?
View 9 Replies
View Related
Aug 21, 2010
I recently read over here: Getting Your Wireless to Work : "For example, open-source firmware for the Broadcom BCM4306/3 BCM4318, and BCM4311/1 was just released. Future openSUSE versions will be able to include this firmware and those devices will work immediately..." I am looking for PCI cards for desktops. Besides the list of supported chipsets at [URL], is there a brand name list with firmware support by OSS 11.3? At the moment, I have a Netgear WG311v3 which believe has been causing system instabilities in both linux and windoze:
01:06.0 Ethernet Controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11 b/g Wireless [11ab:1faa] (rev 03)
View 7 Replies
View Related
Apr 17, 2011
I can't get the drivers to work in mswin. The files won't show. Doesn't recognize the drive in the list. Are there suse drivers? So I get the pics off the phone.
View 2 Replies
View Related
