I have recently obtained a dell 725 printer but it the drivers do not seem to be available when I try to configure it.
View 3 RepliesDid anyone have any luck getting dell v305 printer to work on linux ? do u guys know any generic drivers for it?
View 2 Replies View Relateddoes anyone know where to get drivers for the DELL 2135cn to run under SuSE 10.3?
View 3 Replies View RelatedI use (open) SUSE since version 7.1 and never had any trouble using my HP Laserjet 4L. So I hardly paid any attention to the installation after installing OpenSuse 11.2. Until I tried to print something from OpenOffice.org and my printer started printing empty pages with a first page with some garbage. It looked like a wrong driver. Suse recognized the printer without any trouble and installed - what seemed the correct - driver. I tried several other drivers from the list but they all gave the same result.
Something wrong with the printer - which functions already more than ten years? I tried it on Windows Vista (dual boot on the same computer) and Vista printed without any problem a correct test page. So nothing wrong with the printer. I tried a live CD with Ubuntu 9.10. And Ubuntu gave the same problem as OpenSuse: printing a line with garbage and empty pages. Is something wrong with the kernel?
I'm new to openSUSE and have only used Ubuntu. I have a Epson Stylus NX110 all in one printer. All I really care about is the print capabilities, scanning is a secondary issue. Suse recognizes the printer but doesn't have a driver for it. On Ubuntu I had to use the NX105 drivers but they worked just fine.
View 3 Replies View RelatedI recently installed openSUSE 11.2 on a computer with a Canon i860 printer attached to it. Previously this computer had Ubuntu 9.10 installed on it. When Ubuntu was installed on it, the computer found and printed on the Canon i860 printer just fine. When I installed openSUSE, the list of Canon drivers did *not* include the Canon i860. Just for giggles I selected Canon BJC 4000.
It prints, but it "misbehaves" - For example, if I want to print a document that says only "Hello world", it will print it, but it prints it about 20 times on one sheet. I figure this insanity is caused by the improper driver I selected. I'm not expert enough to know how to get this printer working. And - why would it work okay in Ubuntu 9.10, but not openSUSE 11.2? Did I do something wrong while installing openSUSE?
after few years being limited with my pc configuration (windows OS) I realized that linux or it's distributions is the best invention in 21 century. And finally I am starting use it. openSUSE 11.4 installaition succesful, I updated it and it looks I don;t have any problems, but I got few questions.
1. How install older version of mozilla firefox internet browser here? I can't install some plugins because it's a firefox beta 12 version, for example. I am quake fan, o I like play quake live, but i can't install quake plugin, because my firefox is beta version.
2. Does I got all drivers instantly installed to my mashine? ATI video drivers, sound drivers ect??
3. Are there any How-To guides which can teach me, how I can improve my desktop? gadgets, 3D desktop ect...?
I verify in Intel site that my Intel'drivers are outdated, because Dell Suport is slow, so how do I update them in Opensuse?
Do I use Virtual Machine or try through Wine?
Bought a Canon all-in-one (printer, copier, scanner) today, which prints beautifully on XP & connects to our WiFi without problem. Only downside, is it can't find a driver for Linux. Anyone out there using this printer under Linux, or any pointers to the right driver?
View 3 Replies View RelatedHow can i install drivers for Dell Wireless 1397 802.11b/g Half Mini Card.I'm using openSUSE x86_64 on my Dell Inspiron 1440.
View 6 Replies View RelatedI had dual screen config (large desktop) going on 11.2 with proprietary nvidia driver without problems. After upgrade to 11.3 this didin't work. I was not able to find a way to configure nouveau drivers, and it was stuck in the 'twinview' mode, so decided to install binary nvidia instead (the 'hard way'). Took me a while to figure out 'nomodeset' thing, but in the end drivers were installed successfully. The problem now is that only monitor displays anything, and I can't find the nvidia control panel to activate second monitor and extend the desktop there.
Used to be able to install nvidia control panel easily in 11.2 with one-click install, but for 11.3 the page says that the one-click install buttons aren't ready yet (SDB:NVIDIA drivers - openSUSE) So my question is 'how to get dual screen going and extend my desktop to second screen using 11.3 and nvidia 210 card' ? And I don't care whether it's nouveau or proprietary drivers, as long as it's easy to configure and it works.
Ubuntu 10.04 and have a problem with loading the Linux printer drivers for my new Lexmark printer. When I try to load up the printer driver downloaded from the Lexmark site I am asked to enter a root administrator password, but when I enter the password I used to setup the OS it will not accept it. I have reviewed the "sudo" terminal password info, but as I am a newbie I was concerned about wrecking the installation.
View 4 Replies View RelatedI am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
I am trying to get Canon MP250 printer and scanner working in OpenSUSE 11.3 and so far I've had limited success. Both components work up to a point, but aren't fully operational.First of all, I installed the drivers from Canon website for both parts of the multifunctional device. Here's the report on the versions (it's localised, but it shouldn't be hard to understand ).
The printer works for the most part. But it fails to set images to greyscale when I request the driver to. There are some guides about that for Ubuntu, but none for openSUSE that I could find. Also, what does the setting "Amount of Extension" in the printer options do?It would also be nice if I could set the printing quality as well. Right now it seems to print everything with the default quality setting, but personally I like using lower print quality since that saves ink and makes it a little faster.
The scanner, however, is hardly usable at all. If I try to use Canon's ScanGear MP to scan, I can hear that it operates the scanner, but the program itself freezes and after a while gives me the "Cannot communicate with scanner" error. On certain settings I can also hear that the scanner itself doesn't complete the scan (the indicator on it also reports an operation in progress, but it never gets completed).If I try to use Acquire images, the native KDE scanner application, I can get it to scan, but only on very specific settings: it must scan it in colour and the resolution must be equal to or over 300 dpi. If I try anything else, the resulting image file is completely blank or I get an "Error during device I/O". And, of course, it can't save PDF files.
where I can get compatible drivers for 10.04?
View 7 Replies View Relatedi have installed windows as well as linux on my system(dell optiplex 760).i m trying to install lan card drivers but the following error occur."Error resolving dependencies "unable to resolve the dependencies for some packages selected for instalation.
View 1 Replies View RelatedI purchased Dell xps15 I got 1GB NVIDIA GeForce GT 525M graphics with Optimus I installed ubuntu 10.10 64bit and then installed the nVidia drivers by following procedure given as [URL] when rebooted I was dropped down to cmd prompt! then i reinstalled it and now want to install nVidia drivers so what should i do ?
View 2 Replies View Relatedm using a dell vostro 1510 and i want to install drivers for the wireless network adapter dell 1395 wlam minicard
m using Backtrack
h/w config :
GPU-ati4570 512 mb
WiFi-intel5100 half mini card.
The ethernet card manufacturer is Broadcom, dunno the exact number but its same in all the new laptops as the chipset is Intel's GM45.
I tried the drivers supplied by Dell but they all gave dependency errors. Since Internet is not working I can't resolve any.
The distro is RHEL 5.
In a previous thread I stated that I had updated my old dell's nvidia drivers only to receive a blank screen (of deadly doom) in return. Now however I would like to try and install them again, but this time not through the hardware drivers app. Where do I do this and which drivers should I get. My google searches has failed me.
View 5 Replies View RelatedWhere can I find the device drivers so I can install RHLE v5.x on a Dell Optiplex 755?
View 5 Replies View RelatedHave just got a Dell i5 and have installed Fedora 8, but I dont have any of the device drivers (sound, wifi, ethernet etc).
View 6 Replies View RelatedMy book is Dell-I1524D-128 with Beze1 with Camera, these days I need chatting with my parents, but it is cant used with my camera in CentOS. I dont know can i download the drive from here?
View 1 Replies View Relatedhplip-3.10.5.run is the name of the file.
View 6 Replies View RelatedI have Fedora 12 distro. I tried to use commandls | lpr for fun but the error message has arised I dont have the printer, the driver for it, if to say more precisely. But when I inserted the disk with software, the CD-ROM disappeared from my computer. What should I do to install it? I have no experience installing something yet.
View 14 Replies View RelatedI have a Xerox printer, Phaser 3160. On the cd that comes with the printer i got a file for linux called "P3160.tar.gz".
Having extracted this file I found the content as listed below:
These are the files in the linux dir,nothing in the other dirs
Below are dirs
As there is no ./configure file, what do i have to do to install the drivers for the printer
I am using Suse 11.3
I used wubi to install 9.10 on my dell inspiron 1525. I had a problem with not being able to get wireless working, and found out that I had to activate the Broadcom STA driver which lead to a crash. Now I've rebooted, everytime I try to install I get 'SystemError() InstallArchives' or the authenticate box hangs. Is there another way to install these drivers?
View 1 Replies View RelatedI had just installed Ubuntu in my brother's laptop and the drivers for the laptop`s wireless card got deleted, or that's what is leading me to believe. Prior to the installation, the laptop was picking up wireless signals just fine. I tried finding the drivers on the INTERNET but there are too many and I don't want to get the wrong one. Even so, I don't know how to install it through Ubuntu or anything. I tried the "disswrapping" app. but it was looking for some sort of ".if" file type. I also tried using the Terminal, but I'm not an expert on this kind of stuff. I got Ubuntu 2 days ago on my own laptop.
View 1 Replies View Relatedhow to load drivers for my printer? I think I can find them online but have no idea how to navigate to get them loaded so I can finally use my printer!
View 1 Replies View RelatedI believe printers and printing are 2 most retarded things on this planet, completely useless and unnecessary.I haven't had one and never needed one, until now, as in my little retarded country bureaucratic and accounting reasons forced me to buy one, as I have my own company (and I really really hated to do it, but...) Whatever, I got Samsung SCX-4623F (and I will hate myself till end of my life to buy such retarded device), and now I can't seem to figure out how to get it started in Fedora 14. I dont need scanner, just printer. Naturally, there are no native drivers for linux, and I have cups installed and Printing tool in System->Administration doesnt do anything.
View 8 Replies View Related