I put a cd or dvd in and i get this error message "Unable to mount ..... Authentication is required" What's going on? i used to be able to do this no problems
View 1 RepliesI get this error when I try and mount a WD Passport external hard drive. Has anyone run into this before?
View 14 Replies View RelatedI set up the 'Proxy' from Yast and they tested successfully. I can connect to internet, but why am I getting 'ERROR 407 proxy authentication required'?
FYI, my comp is the part of company .NET network with bunch of firewall and security...
when i use the terminal, and i run "sudo apt-get update", there is a notification which says, "407 proxy authentication required". i use the internet of our school which requires its users to log into its proxy server so that the user can have access to the internet. the problem is i cannot run update or install commands through the terminal, though i can connect to the internet through firefox.
View 1 Replies View RelatedI'm running OpenSuse 11.0 in a lamp configuration with Apache 2. I configured Apache with the .conf files instead of YAST because I am running virtual hosts (that's another story).
My problem is that my server will not render the pages unless the permissions are set to 775 which I know is not necessary. This is also causing a problem because I am trying to install WordPress onto the server. WordPress will run, but it unable to upload images because it cannot create the directories required.
Apache2 is running as 755 with root as owner and www as group. I changed the owner of the htdocs sub-directories to myself, and created a group that has permissions to write to the directory. WordPress runs as my user and has the same permissions (775).
I would like to use a wireless network from Ubuntu. In the network drop-down menu I select a network (this is a University network I have an account there). Then I get a windows with the following fields:
Wireless Security: [WPA&WPA2
Enterprise] Authentication:
[Tunneled TLS] Anonymous Identity:
[] CA Certificate: [(None)]
Inner Authentication: [some
letters] User Name: []
Password: []
I put there my user name and password and do not change default value and leave "Anonymous Identity"blank.
As a result of that I get "Authentication required by wireless network". How can I solve this problem?
I think it is important to notice that our system administrator tried to find some files (which are probably needed to be used as "CA Certificate"). He said that he does not know where this file is located on Ubuntu (he support only Windows). So, probably this is direction I need to go. I need to find this file. But may be I am wrong. May be something else needs to be done.
When I try to add a printer using this web interface.I get stopped at authentication required.I put the root login and pass but
401 Unauthorized.Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.
If the wifi network gets disconnected why is the wireless authentication key needed again and again...cant ubuntu store and retrieve it...
View 9 Replies View Relatedi have just installed Red Hat linux 9 workstation ,i have configured the lan ip and successfully ping to other pcs on network ..but problem is internet is not working , i have already set the proxy setting, i have windows environment and running isa server 2006 proxy server ,when i trying to browse any site , isa eroor page occur "error code :407 proxy authentication required" Linus machine couldnot prompt the user credentiall.
View 2 Replies View RelatedI try to download the Tomcat from my LINUX machine with command:
Code:
wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
I got error as follow:
Code:
[root@s003ap23-test opt]# wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
Setting --verbose (verbose) to 1
[Code]...
After having problems with lxde crashing while running Jessie, and re-installing Wheezy, I am not able to mount my WinXP drive. In the past I was able to run pcmanfm and mount the drive from there. It would ask for my root password and then would mount the drive. Now, however, when I click on the drive icon it gives me an error message saying authentication required.
One thing is that when I installed Wheezy I had the WinXP drive disconnected so as to not inadvertently install Wheezy on the wrong drive (I have two identical drives). After installing I connected the WinXP drive and then did a grub update. I can boot either drive, as expected, but I can not mount the WinXP drive from pcmanfm. Do I need to change the Policykit?
I have had some help with root password su and sudo su, but I can not find the correct password to install or remove programs. I keep getting the same message ' Authenticate' Authentication is required to install software packages. An application is attempting to perform an action that requires privileges.Authentication is required to perform this action.Then it asks for a password, I've tried enter, seacats, knoppix, user, and my root password. None of these work I seem to be a second user and not the owner.
My Linux language is very low, but I am learning, right now in order to find or try to install software I go through the startup menu> preferences> software center. Is there another way to find and install software that doesn't require and authentication password? If so where do I find out the steps to do this? Hands on is always the best teacher.
Im having this error when im trying to edit my root directories...
View 9 Replies View RelatedWhen my router switches off... the wifi signals go off... then why the hell ubuntu keeps on connecting to that very wifi like hell and when doesnt connect shows the prompt to manually connect... with the wifi key already filled in... whats the use of saving the key when it has to ask the question from me either to connect or not?? and if its isnt available... just wait when its available.. and for the prompt,i have only option to cancel(because wifi isnt available at that moment if i select connect it again tries to connect like hell..which it cant) and if i cancel it wont auto-connect when wifi does get available! what the heck?
Windows has this done the right way... when the wifi isnt available.. it dissconnects silently.. and when it becomes available connects silently.. why isnt this been done this way in ubuntu??
Ive attached an image..one can see in the image that it says "authentication required by wireless network" when there isnt any.. as router has gone down!
And the second thing i want to report is that there is no way to report this bug from ubuntu... the launchpad.net talks of going through bug reporting process which is done against a definite package... now how does a user know which package would be causing this error?? there should be a more clear process of reporting such bugs to ubuntu team... which a common man using ubuntu( ubuntu says its most user friendly of all distros right?) can report..
I am not able to run nautilus as a root userA error message saying - Could not parse arguments. Cannot open displayHow do i find which version is my gnome??
View 3 Replies View Relatedsince I installed fedora 13 in my laptop, every time I want to access my windows drive it asks for root password to authenticate! I know there must be a way to fix this issue, i did this in my Fedora 10, but I forgot how I did it.Can anyone plz help me, so that only one authentication is sufficient, every time I restart/ start it asks for authentication which is very boring and I hate this
View 6 Replies View RelatedMy CD/DVD-drive used to work when I started using OpenSuse, but lately when I try to play a CD or DVD the icon doesn't show up and I can't open the disc using vlc.
It sounds that the system tries to mount the disc over and over and I get an error message that says "Couldn't mount audio disc (in Swedish)" (if that's what I'm trying to do) and it says something about a dbus error. Sometimes nothing happens at all when I put a CD in the drive.
I'm using OpenSuse 11.2 and Gnome 2.28.2 on an Acer Timeline 5810TG.
I first noted a few weeks ago I couldn't mount my NTFS partitions using dolphin. At the time I was having problems with windows, so I thought - naturally, they are marked as dirty, no biggie-
However, I still can't mount them and I know they are clean. I get the error: "filesystem is neither well know nor in /proc/filesystem nor in /etc/filesystems" which is strange since I can mount just fine in the console using mount -t ntfs-3g.
I installed OpenSUSE 11.3 64 bit version on my Dell Laptop Studio XPS 16. My USB mouse is working nicely. However, as I inserted MTS USB MODEM, I found that device is not mounted. "dmesg" shows USB modem in sdb emulating as scsi10 drive. I tried with 'fdisk -l" which does not show the device. 'lsusb' shows the device ID. Itried to mount /dev/sdb to /media/disk after creating a directory /media/disk, but of no use.
View 9 Replies View RelatedWhen I plug-in any kind of usb storage device an error massage appears
Unable to mount (name of the devise) DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending and the window of the devise opens several times. Everything working just fine, I can store files and read them, but I don't want to close all the windows that opens-up each time I plug some thing.
I am using Opensuse11 and i have created an lvm involving two disks /dev/sdb and /dev/sdc. I have created a lvm volume group of 5 GB with the above 2 disks. The problem is it is unable to mount at boot time. It is giving the following error messages:-
mount: special device /dev/TST_VOL/VOL1 does not exist
...
...
[code]....
i jsut installed opensuse kde and xfce and i cannot mount dvd/cd 's. i am using opensuse 11.3 32 bit. i added my user to the cdrom drive group but still no luck. How to get the cd to mount by jsut clicking on the dolphin icon?
View 9 Replies View Relatedbeen searching google and forums for about 5 hours now, and can't figure this one out, I have a server running opensuse 11.2 sharing various NFS directories, I have one laptop that is running 11.2 and I have no problem getting my NFS shares from the server.On my other laptop that is running 11.3, I had the shares working at one point, but changed things around and added a new HD to the server, now I can NOT get this thing to work, I have tried everything I could find to read on it. Started and stopped the NFS server and exportfs -a, and checked /var/logs/messages on server and nothing about this laptop (192.168.0.102 suse 11.3) trying to connect.On this laptop, I have deleted all the shares, and tried to re-add them but still get this error everytime.on server /etc/export:
/home/kryptic/ *(rw,no_subtree_check,sync)
/backup/Media/ *(rw,no_subtree_check,sync)
/backup/Dales_Backup/ *(fsid=0,crossmnt,ro,root_squash,sync,no_subtree_check)
[code]...
I have two systems, one running 11.2 x64, and the other running 11.3 x64. on both systems, I've lost the ability to mount internal partitions "on-the-fly" from the Dolphin panel.Trying to mount via Dolphin has always given me this error on the 11.3 system, but only recently started happening in the 11.2 system after a recent "zypper dup" (using the "Stable" KDE 4.4 repo).If others are experiencing this same issue, please let me know so I can file a bug report. Please note that the error only occurs for internal partitions, and external drives work fine.
View 9 Replies View RelatedI double click "My Computer" and Konqueror goes to sysinfo:/I then try to click on one of my partitions (ones that are already mounted or ones that are not)eeted with the error;There is no application installed that can open files of the type block device inode/blockdevice).Do you want to try to install one?It goes through the repo and finds nothing.I love openSUSE and this one error is the only thing keeping me from being able to use this release.
View 9 Replies View RelatedPreviously, everytime I insert a USB drive it automatically mounts. But now I am getting this error:
"Unable to mount 8.0 GB Media DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Also, previously my CD/DVD works properly. But now everytime I insert a disk, this is what I get:
"Unable to mount TOSHIBA
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
By the way, I am using openSUSE 11.1.
I just upgraded from 11.2 to 11.3, everything seems to be working fine except that my other hard disk partitions are un mountable as my normal user. I used to be able to click on the drive in Dolphin and it would ask for the root password to mount it, but now it gives the error that the action is denied by org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action, result) What do I do to fixed this? I have checked as many settings as I can and can't find it. I would like to avoid editing the Policykit.conf file manually if possible (if that even is the right file).
View 6 Replies View Relatedbanshee seems unable to recognize and mount ipods. once connected they are seen by nautilus (and songbird) but not banshee..
View 4 Replies View Relatedi plug my camera into my laptop and it won't mount the camera's memory, when i plug the memory card directly to the laptop it mounts without problems.
1) a good DIVx/ wmv and DVD movies player?
2) audio/ mp3/ wav player
I have a Thecus NAS with nfs support running. Now I switched from OpenSUSE 10 to 11.2 on the client side and aren't able to mount my nfs shares. With SuSe 10.0 I didn't have any problems.
The /etc/exports:
/raid/home_nas1 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
/raid/soundandmore 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
On the client side I'm able to see the shares:
showmount -e nas1
Export list for nas1:
/raid/home_nas1 192.168.0.24/31
/raid/soundandmore 192.168.0.24/31
The client address:
inet addr:192.168.0.27
I'm using nfs-3:
mount -t nfs nas1:/raid/soundandmore/mnt
mount.nfs: access denied by server while mounting nas1:/raid/soundandmore