actually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies
I saw a post where you were faceing "Type s for swith or M or mannual restore"
I got the same message. I tried S but nthing happend then I tried M. it took me to root@ubuntu:/#
How i restore it manunally or if not possible I need to back up the data to pend drive
but i cant find the pendrive in the home section.
I have installed Ubuntu 10.10 x64 bit edition. On booting Ubuntu wouldn't mount my partitions, so I installed pysdm to auto mount them during booting. But since then I often get during boot: Press S to skip mount or M for manual recovery. What should I do?
View 1 Replies View RelatedFirst of all: it's been more than 12 years ago since I worked with Linux, and a lot has changed in the meantime. But I considered it a challenge to install Ubuntu 9.10 and lateron upgraded to 10.04 LTS without any troubles, until now:
Except my main partition ("/") all other partitions fail to mount. All NTFS partitions from my other OS and also 2 other linux ext4 partitions I've made are not accessible anymore. and, what bothers me the most: I deleted those 2 new linux partitions in the meantime because I couldn't access them initially because Root was the owner (Duh! root is standard disabled in Ubuntu, right?). After an attempt to try to automount all partitions following the help guides I got now big grey errors on my splashscreen while booting, telling that an error occured with e.g. /media/Backup because it is missing or it cannot be mounted, with 3 options below: waiting, skipping or using a command prompt to solve this. I always choose Skip for safety.
Now if I want to see the content of all my other partitions I got a popup telling me unable to mount e.g. /media/Downloads and the message included:
[Code]....
I have figured out manually setting the swap partition and setting "/" as the mount point for the primary partition during install. If during install, I want to create another partition to keep the OS separate from installed programs and such, to be able to do a clean install every 6 months and not loose everything (or anything) I have done prior.
View 2 Replies View RelatedUnable to mount NFS server on the client.
Getting the following error.
mount: RPC: Remote system error - Connection timed out
Not able to mount windows drive & foder, in linux. i have got following error.
mount error 92 = Protocol not available
I just installed Linux Mint Debian Edition on my friend's laptop. The biggest problem is getting his iPhone 4 to mount. On libimobiledevice.org it shows a cool video of a guy managing his iPhone with Linux thanks to libimobiledevice. libimobiledevice.org also says libimobiledevice supports the iPhone 4. But when he plugs it in, he gets an error that says:
Quote: Unable to mount location: Unhandled Lockdown error (-5) It's a serious issue and needs to be resolved ASAP. ***EDIT*** If this is a hardware topic, any mods can feel free to move it.
I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
I need a guicance related to mounting USB stick of 2GB capacity. Normally when I insert my USB stick it mount automatically and show me.I want that instead the usb mount automatically I manually mount it. Now there are two steps to do it. First How to stop USB to mount automatically ? Second How to mount it manually ?
View 1 Replies View RelatedDebian Lenny, kernel 2.6.26-2-686 I'm trying to manually mount my digital camera. Picasa recognizes the device and imports pictures. However, I'd like to access my device manually as there are small video files I'd like to retrieve. It's for a fujifilm Z33 WP digicam.
Code:
$ lsusb
Bus 005 Device 010: ID 04cb:01f5 Fuji Photo Film Co., Ltd
Bus 005 Device 004: ID 046d:c012 Logitech, Inc. Mouseman Dual Optical
Bus 005 Device 002: ID 413c:0058 Dell Computer Corp. Port Replicator
[code]....
In Picasa...where it says "Select Device", it finds
Code:
USB PTP Class Camera@usb:
and
Code:
USB PTP Class Camera@usb:005,010
selecting either one of them can access the camera directly. How can I pinpoint my device and mount it using the regular mount /mnt/point/ /path/to/my/cam?
I have a Seagate Barracuda 7200.10 (IDE) hard drive that was used in winxp as a secondary disk.When I tried to connect it to my Ubuntu laptop via usb cable, it doesn't recognize on its' own.
View 6 Replies View RelatedI'm randomly getting 'Continue to wait; or press S to skip mounting or M for manual recovery...' or something like that at boot ((it flashes very quickly)- If I don't press anything, I'm prompted for my password (I configured it to login with password) and the desktop loads...
I'm using Ultimate Edition 2.6.1 -> Ultimate Edition Home
I was using my 1TB hdd to dual-boot linux, windows, and for storage...Yesterday, I imaged the linux partition, and restored it to an approximately 66GB partition I created on a 150GB hdd...Besides the 66GB partition, the rest of the 150GB hdd is 'unallocated space'... That's when the above message started...Below are screenshots of the fstab and partitions as they are now...
im trying to get a network setup i followed the instruction via gentoo wiki samba what i have done
[Code]...
then i did chmod 777 to the shared folders on both machines went into nautilus it sees the folder but it will not mount the folder showing the error msg:"unable to mount location failed to mount windows share" ive been searching unbuntu forums opensuseforums and google for an answer to this issue but as of right now anything that i have tried to do has failed and nothing seems to be working.
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View RelatedI am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
I have a problem in my ubuntu 10.01 that it can't load a drive/volume in ubuntu. When I tried, it said: "Unable to mount location Error mounting: mount: /dev/sda1: can't read superblock". And when I boot my pc with 'Windows', it said : "UNMOUNTABLE_BOOT_VOLUME" under a blue screen. What can I do to solve this problem?
View 9 Replies View RelatedI first noted a few weeks ago I couldn't mount my NTFS partitions using dolphin. At the time I was having problems with windows, so I thought - naturally, they are marked as dirty, no biggie-
However, I still can't mount them and I know they are clean. I get the error: "filesystem is neither well know nor in /proc/filesystem nor in /etc/filesystems" which is strange since I can mount just fine in the console using mount -t ntfs-3g.
I have two systems, one running 11.2 x64, and the other running 11.3 x64. on both systems, I've lost the ability to mount internal partitions "on-the-fly" from the Dolphin panel.Trying to mount via Dolphin has always given me this error on the 11.3 system, but only recently started happening in the 11.2 system after a recent "zypper dup" (using the "Stable" KDE 4.4 repo).If others are experiencing this same issue, please let me know so I can file a bug report. Please note that the error only occurs for internal partitions, and external drives work fine.
View 9 Replies View RelatedI double click "My Computer" and Konqueror goes to sysinfo:/I then try to click on one of my partitions (ones that are already mounted or ones that are not)eeted with the error;There is no application installed that can open files of the type block device inode/blockdevice).Do you want to try to install one?It goes through the repo and finds nothing.I love openSUSE and this one error is the only thing keeping me from being able to use this release.
View 9 Replies View Relatednot solved the correct way, reloaded using the backup i had the foresight to make i separated / into 3 partitions (/, /tmp, and /var) and after a lot of work (and hair pulling) i can now boot and login but i am getting these 2 errors during bootup
There was an error mounting /var/run Press S to skip M for manual recovery
There was an error mounting /var/lock Press S to skip M for manual recovery
[Code]....
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
Quote:
an error occurred while mounting /proc/bus/usb - press s to skip mounting or M for manual recovery
I'm getting this error while booting.
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies View Relatedi'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
View 4 Replies View RelatedI have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"
View 3 Replies View RelatedI have been using truecrypt to mount a partition on my computer for a few months now. Yesterday I tried to access it and it failed, with the following error:" mount: you must specify the filesystem type "
When creating the partition, the filesystem type was set to ext2. Apart from yesterday, I have not accessed this partition for a number of days now, and have done nothing to the operating in system in the ways of changing settings and such for a good week.
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
I on a dell latitude c500/c600 and running 9.10 and have a maxtor 160 gb external hd that wont mount right. it shows up in / but when i click on it i get the error message:unable to mount location can't mount file. could someone give a suggestion to get this to work.
View 9 Replies View RelatedI am using Debian 6.0. When I try to mount a drive (USB) in GNOME or using udisks, I end up with following error message:
Code:
And the when executing
Code:
Code:
Seems like it is trying to mount a CD.
But I am able to mount the same using
Code:
I tried the same with different filesystem and getting same message form udisks.
I am able mount other hard disk partition using udisks:
Code:
How to mount drives using udisks. I don't know how I can configure udisks.
