General :: Mount And Configure Huawey E160 3G USB Modem On Ubuntu?
Jun 10, 2011ubuntu is unable to find my huawei E160 modem driver when i insert it to my computer.
View 2 Replies
ADVERTISEMENT
General :: How To Mount Usb E160 Mobile Broadband Dongle In Kubuntu?
Jan 28, 2011I have use my e169 mobile broadband dongle with Ubuntu without trouble.With Ubuntu network manager I can connect easily. Few days back I want to try for Kubuntu and I installed it through Ubuntu.Now I can log to either Ubuntu or Kubuntu.But when I connect to Kubuntu I cant connect to Internet with Kubuntu network manager.When I try to make a usb disk with kubuntu I realise that my usb dongle detected as a disk.How should I connect to Internet by using my usb dongle.
View 1 Replies View RelatedSlackware :: Huawei E160 3g Modem - Can't Get An Access To The Internet
May 24, 2010I installed today Slackware64-current on my laptop, but I can't get working internet connection. I have installed wvstreams 4.61 and wvdial 1.61, configured it right, it gets an IP address and connection but I can't get an access to the internet.
[Code]....
General :: Configure A USB Modem In RHEL5?
Dec 22, 2010I have a Multitech MT9234ZBA-USB modem. The CD included RHEL drivers which I have installed with RPM. The lsusb command output shows the modem: Bus 004 Device 005: ID 06e0:0319 Multi-Tech Systems, Inc.Which communications software should I use to connect to the modem and issue AT commands?
View 4 Replies View RelatedGeneral :: How To Configure Micromax 310g Usb Modem In Fedora 13
Jul 10, 2011How to configure micromax mmx 310g usb modem in fedora 13? it comes with default installation files for windows and Mac.....moreover it is detected as a cd-rom when i am inserting it in fedora 13....
View 10 Replies View RelatedGeneral :: Network Manager Program Didn't Identify Huawai E160 Dongle - Can't Connect To The Internet
Feb 24, 2011I'm using KDE 4.5 with Ubunthu 9.04 installed Laptop. The problem occurs when I'm going to connect internet with my Huawai E160 dongle. The network manager program didn't identify my dongle so I can't connect to the internet. I have create a broadband connection in network manager program.
I can connect to internet with GNOME desktop since dongle is detect and I can create a Broadband connection and connect to the internet.
General :: Install Huwawi E1550 Usb Modem And Configure It With "nagios"
Jun 28, 2010im using Centos 4.8 server system.. i want to install huwawi e1550 usb modem and configure it with "nagios". Can anyone help me to install huwawi e1550 modem.
View 1 Replies View RelatedUbuntu :: How To Configure Internal 3G Modem
Apr 23, 2011I'm new to Ubuntu. Recently bought a lenovo x100e netbook and installed ubuntu. Is there any Ubuntu Expert based in Cape Town that can assist to configure my internal 3g modem and a few other minor issues.
View 2 Replies View RelatedUbuntu :: Configure USB Modem - Carrier ?
Feb 11, 2010I 've tried many ways to configure my Reliance NetConnect with Ubuntu. I 've tried with wvdial, sudo pon, tried through Network Manager, and using wine I installed the .exe driver.
I liked Ubuntu, but I need to configure usb modem..
I 'm using Huawei EC325, Reliance NetConnect USB modem..
When I try using wvdial, I can see some operations performing, its dialing #777, but some prob with the carrier..
Ubuntu :: Configure Knatty To Detect And Run Modem
May 31, 2011I have an internal cextant modem in my Dell Inspiron 630m laptop, with 11.04 knatty running.How do I configure knatty to detect and run my modem, as I need it to dial into equipment to do remote diagnostics
View 1 Replies View RelatedUbuntu Networking :: Configure BSNL Huawei 3G Modem With 10.04?
Oct 6, 2010how to configure Huawei 3G modem (ec325) in ubuntu 10.04, even i tried with gnome-ppp / wvdial which unable to connect, shows "ppp deamon died" and disconnected at the end of dial.
View 3 Replies View RelatedUbuntu Networking :: Configure Huawei EC121 USB Modem?
Aug 14, 2011I have started using ubuntu 11.04 desktop edition recently. And sadly i dont have an internet connection. I have an USB modem of Huawei. But I cant configure that in ubuntu. Im from india and using Reliance Netconnect 1x EC121 modem. Can anybody please tell me how to configure this modem so that I can connect to the internet? Due to lack of internet connection im not being able to download any updates or codecs. I have started using Ubuntu only 2 days ago..
View 1 Replies View RelatedOpenSUSE Network :: Configure USB Modem In 11.1?
Sep 18, 2009I have bought a new USB modem from my service provider. The model they provided is "Huawei EC1260" Huawei Terminal. As usual the official support is for windows and mac.
I tried to install this device using two methods..
1) Set knetworkmanager settings to "traditional with ifup". Then in wireless setup there is a choice of having "usb" (A tick box). I selected that, and setup completed successfully but the knetworkmanager was not up(I did ifdown wlan0 (wlan0 was the wireless config name), ifup wlan0 and the rcnetwork restart.)
2) Again knetworkmanager was set to "traditional method with ifup. This times while adding the connection I specifically selected the type "USB", then clicked to finish the configuration. The configuration finished without any errors but when I checked the Network Configuration screen no USB device was added there.
Are there any specific steps to configure a USB modem
Ubuntu Networking :: Configure My Box To Connect To A Modem In Bridge Mode?
Jun 27, 2011How would I configure my box to connect to a modem in bridge mode?
I have a server at home that im migrating over to be the default-gateway/router. I have everything else setup (dns,dhcp etc) now just need the ppoe part, or so i beleive?
I have two interfaces. eth0 (lan) and eth1 ready to connect to the modem.
The modem is in bridge mode ready to go.
What is my next step? Are there any good guides, I didn't find any.
Ubuntu :: Modem - Configure Photon+ Wireless Device In My Desktop
Mar 5, 2011I have Ubuntu 9.04 in my desktop, I am trying to configure Photon+ wireless device in my desktop, since it is having .exe file i am finding difficulty to configure it( I know .exe will not work) , but i want to know is there any possibility to configure this modem in Ubuntu machine....
View 1 Replies View RelatedOpenSUSE Hardware :: How To Configure USR5610 Modem
Feb 5, 2010I've recently come into possession of this modem which is supposed to be supported in linux kernels but I'm not sure how to set it up or detect where it is located (dev/ttxx)
View 5 Replies View RelatedOpenSUSE Hardware :: Configure Hsdpa Modem In 11.3 ?
Aug 16, 2010I'm new to opensuse as well linux.today i installed suse 11.3 and installation completed.then i plug the usb modem (ZTE mf 100) and then nothing appears..i dont know what to do for configure the modem.
View 2 Replies View RelatedOpenSUSE Network :: Hardware Modem Will Not Configure
Oct 18, 2010I have a Zoom 2920 internal hardware modem that worked well with Suse 10.0. In Suse 11.3 the modem config. overview lists 2 modems for this one board; #1- AT Modem and #2- Venus Modem (v90, 56K Flex). With #1 "edit" brings up modem parameters and the modem device line is blank. With #2 the device line shows /dev/ttys4.
When the provider parameters are entered, for either #1 or #2, the modem overview continues to list them as not configured but a third line "modem 0" is configured with the provider information at /dev/ttys4. The modem will not function.
Hardware :: Configure Nokia 1508i As A Modem
Jan 14, 2010I have a Nokia 1508i, and I want to use it as a modem. But I've tried many times, many configurations and it didn't worked.
When I connect it via USB to the computer, it's recognized as /dev/ttyUSB0 and /dev/ttyUSB1.
When I try to connect using the Code: wvdial , I get the following message:
Code:
Modem Type = USB Modem This is the log of Windows when I connect:
Code:
Scanning your serial ports for a modem.
Hardware :: Configure Modem Router With Centos?
Jan 25, 2011i m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not
View 14 Replies View RelatedUbuntu Networking :: Configure - Dial-Up Modem And Connect For Internet Access
Oct 10, 2010I just installed Lucid Lynx Ubuntu on my computer. I love it, but I do not see how to configure my dial-up modem and connect. I'm hoping it's still possible. Here's my hardware.
333mHz Pentium III
Lucid Lynx 10.04 LTS
US-Robotics 56K Faxmodem External
256mb RAM
ISP OmniLEC
Fedora Networking :: FC11 Can't Configure Modem - No Kudzu
Jun 15, 2009Fresh install of FC11. Had to install libwvstreams-4.5.1-5.fc11.i586.rpm and wvdial-1.60-8.fc11.i586.rpm
Now get following error -
OpenSUSE Network :: Configure ZTE AC2726 USB EVDO Modem 11.3
Nov 20, 2010I am trying to access the internet via my ZTE AC2726 USB EVDO Modem in openSuSE Linux 11.3.
I have looked at the site How to configure ZTE AC2726 USB EVDO Modem on openSuSE Linux | bayuirawan.com but when I type the command:
As below,the following errors appear:
CentOS 5 Networking :: Configure Modem ADSL For Cpanel?
May 26, 2009While communicating with cpanel , they said they don't support on any NAT router based network. To host website with cpanel internet should be connected directly with modem (no router) I have a dell poweredge server and recently brought PCI modem. I have 8 IP static addresses from my ISP. cpanel as they said that they don't support networking.
View 3 Replies View RelatedUbuntu Networking :: Huawei E160 With Lucid - Still Not Working Permanently
May 5, 2010The problem, I described here [URL] is still active. The final brought no solution...
View 9 Replies View RelatedUbuntu Networking :: Does Anyone Of You Use Hauweii E160 Usb Mobile Broadband Connection?
May 25, 2010does anyone of you use a hauweii e160 usb mobile broadband connection? in ubuntu 9.10 it worked, but now (10.04), after the remove of /proc/bus/usbfs it wont't get recogniced as an internet-device.why should i make a symlink from kernel/debug to /proc/bus/usb/devices
View 3 Replies View RelatedOpenSUSE Wireless :: Sierra Usb Modem - Attach To Ttyusb0 But Cannot Configure In Kppp?
Jun 28, 2010i have been able to get on line running other linux os using the terminal first i type sudo modprobe -r usbserial & enter followed by sudo modprobe usbserial vendor=0x1199 product=0x120 & enter the last command is sudo dmesg|grep -i ttyusb. I have done this for years and it always has got me on line after the above i open kppp and select for modem /dev/ttyusb0 and click to verify kppp recognizes my sierra wireless usb modem and that is all i have ever had to do, plug in the usb modem type the three commands it comes back with confirmation the modem is attached to ttyusb0, ttyusb1 & ttyusb2 in kppp i click /dev/ttyusb0 and click quarry and get on line with suse11.1 it is not so the first command sudo modprobe -r usbserial comes back with a fatal error but the second and third command give me the same results saying i have attached the usbmodem to ttyusb0,1 & 2. but i cannot configure it in kppp.
i have tried researching on line but cannot find a similar thread. I believe the way i described above has worked on lindows 5.0, and it is how i do it with Mint which i can get on line with today. so i hope one of the wonderful millions of linux users will direct me as to what i am doing wrong. i am running amd 785 4 gb ram msi mainboard ms-7549 my modem is sierra wierless modem 595u (vendor=0x1199 product=0x120) connecting through Sprint pcs which requires no user name or password.
OpenSUSE Hardware :: Unable To Mount MTS USB Modem?
Jul 28, 2010I installed OpenSUSE 11.3 64 bit version on my Dell Laptop Studio XPS 16. My USB mouse is working nicely. However, as I inserted MTS USB MODEM, I found that device is not mounted. "dmesg" shows USB modem in sdb emulating as scsi10 drive. I tried with 'fdisk -l" which does not show the device. 'lsusb' shows the device ID. Itried to mount /dev/sdb to /media/disk after creating a directory /media/disk, but of no use.
View 9 Replies View RelatedUbuntu :: Gnome NetworkManager 0.8 Huawei E160 HSDPA / UMTS - Does Not Connect
May 24, 2010Some month ago i bought a UMTS / HSDPA Stick "HUAWEI Mobile Connect E160". I worried about getting it running with Ubuntu, but it was freaking easy to get it running. Even less complicated than installing the same device with windows.
It worked some month without any problem and then suddenly, didnt work any more. If i plug the device to my laptop (lenovo x61) unter linux now, i still can click to start the mobile broadband, it trys to connect some time, but shows "disonnected" at the end (dont know the exact message in englisch, because i use german language prompts). The same device still works fine with same hardware with windows vista at all 3 usb ports. I deleted the mobile broadband settings couples of times and made a new one, without any effect to the behavior.
Fedora Networking :: Allied Telesyn USB Modem AT-AR206 - Configure Network To Use DSL Line
Jun 9, 2009I have been using an ethernet ADSL Westell modem for years and would like to upgrade to a newish Allied Telesyn USB Modem AT-AR206 in Fedora Core 10. The modem power goes on when plugged into my pc and lsusb shows that it has been recognized with this:
Bus 002 Device 003: ID 1110:9022 Analog Devices Canada, Ltd (Allied Telesyn) ADSL Loader
I used system-config-network but don't have the option of adding this new hardware.
How do I configure my network to use my DSL line?