General :: Printer Resolution Low After Upgrade To Fedora 14 / Fix This?
Nov 28, 2010
I have just upgraded my desktop to Fedora 14 from 12, I have been quite happily printing postscript documents via CUPS to an Epson CX9300F for ages. After the upgrade ( rather re-install as the boot partition wasn't big enough ) The documents come out looking like they were printed on an old Apple deskwriter, i.e. very pixel-lated.
I cannot seem to find what or where one has to tweak things to get it too work. I have tried both CX9300 drivers as supplied with the OS. I have tried system-config-printer and changed the resolution from auto to 370. So far no luck.
View 6 Replies
ADVERTISEMENT
Jul 9, 2011
I have an Intel Core2 Duo system that I upgraded from Fedora 12 to Fedora 14 (32-bit). When I try to install updates from YUM I get the following error output:
Dependency Resolution Errors:
Package: netbeans-apisupport1-6.7.1-1.fc12.noarch (@fedora/12)
Requires: netbeans-platform = 6.7.1
Removing: netbeans-platform-6.7.1-2.fc12.noarch (@fedora/12)
netbeans-platform = 6.7.1-2.fc12
Updated By: netbeans-platform-6.9-4.fc14.noarch (fedora)
netbeans-platform = 6.9-4.fc14Package: netbeans-apisupport1-6.7.1-1.fc12.noarch (@fedora/12)
Requires: netbeans-platform-harness = 6.7.1
Removing: netbeans-platform-harness-6.7.1-2.fc12.noarch (@fedora/12)
netbeans-platform-harness = 6.7.1-2.fc12
Updated By: netbeans-platform-harness-6.9-4.fc14.noarch (fedora)
netbeans-platform-harness = 6.9-4.fc14.
How can I resolve these errors so the system can update properly?
View 6 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Dec 26, 2009
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
View 3 Replies
View Related
Oct 14, 2010
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies
View Related
May 14, 2010
My Operating system is Ubuntu 10-4 that I have just installed.
View 6 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Feb 23, 2011
i am new with linux. i just installed fedora 6 on my pc. when i start linux os i get a message input signal out of range change setttings to 1280X1024-60Hz
Linux does not start...i changed the settings in windows and tried again but still the problem was not solved
View 3 Replies
View Related
Apr 10, 2009
I have a HP Officejet G85 and I just upgraded my system, which included the whole printer subsystem, and lost my printing. I have tried adding it via KDE's print dialog as well as directly via CUPS (localhost:631), to no avail.
I have searched all over the web for a couple of days, and can find similar stuff, but no resolution. I think it may be new (I just upgraded most of my system) in the latest releases of cups/hplip/.etc. Also, after the upgrade my hp-toolbox quit working, telling me I don't have qt4 installed, which I do.
View 2 Replies
View Related
Sep 15, 2010
I am using Fedora 13 and have an intermittent problem with the printer(HP d2540). Periodically, the printer will not finish a print job or the software leaves some form of command that interferes with the subsequent jobs. I haven't had much luck finding the print queue. Typically, the print jobs are coming out of the OpenOffice word processing segment and I am not sure whether there is an actual problem or simply a page formatting error.
View 2 Replies
View Related
Sep 9, 2009
This is the first time our office is using fedora 7. We have purchased EPSON T10 printer assuming that any printer product is compatible with it. However, the accompanying CD driver of the printer is compatible only with Windows. We are now in dilemma on how to install the said printer.
View 12 Replies
View Related
Apr 2, 2010
I've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?
View 2 Replies
View Related
May 15, 2010
After upgrade to ubuntu 10.04 my screen resolution become 800x600 and in 'Monitors' I see only 2 options 800x600 and 640x480. but before upgrade I had much higher resolution in 9.04
View 2 Replies
View Related
May 16, 2011
I have upgraded my machine from Ubuntu 10.10 to 11.04, initially it worked fine, and then I had to replace my VGA cable - now I wind up with a screen resolution that is too low.
It is possible to change the resolution with xrandr, but is there a way to set this permanently (currently it resets on startup)? Previous versions have altered the xorg.conf file and just added a new resolution setting - but I think these settings have been moved out of xorg.conf. Does anyone have any ideas how to change the screen resolution settings permanaently in 11.04?
View 6 Replies
View Related
Aug 11, 2010
After login I get the blue desktop with the swirly art thing but I don't have a starting point to be able to do anything and think screen resolution may be the issue. How do I resolve that?
View 2 Replies
View Related
Feb 11, 2010
I installed printer drivers from a deb package and now I can't install/update anything!! I get this error:
jordan@jordan-desktop:~$ sudo apt-get install gtk-recordmydesktop
[sudo] password for jordan:
Sorry, try again.
[sudo] password for jordan:
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
gtk-recordmydesktop: Depends: recordmydesktop (>= 0.3. but it is not going to be installed
pstocanonbj: Depends: libcupsys2 (>= 1.2.3)
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
Why is this 1 error tying up the entire install system?
View 4 Replies
View Related
Jan 27, 2011
I'm running Ubuntu 9.10. The Update Manager did an update to HPLIP, the Hewlett Packard Linux Internet Printing software, one or two days ago. When I went to print today, the HP Officejet 4500 printer showed up in Open Office when my mouse pointed to the printer icon. But, the printer wouldn't work. Then I noticed that the HPLIP Toolbox icon was moved from the Applications - Accessoires folder, to the System - Preferences folder. I reinstalled all the HPLIP software, using the Synaptic Package Manager. When I click on the HPLIP Toolbox & run the HP Device Manager, it says "No Installed HP Devices Found".I was a little surprised to see the software upgrade caused the HPLIP toolbox to move fromhe Applications folder to the System folder. Because of this, I suspect there may be a bug in the upgraded software? Is anyone else having this problem?
View 1 Replies
View Related
Apr 14, 2011
Problems with canon ip4000 printer upgrade to opensuse 11.4 led to a printer problem: only the 1 page of a printing job is o.k. but the following pages are not to obtain.
View 1 Replies
View Related
Mar 6, 2010
After last Current upgrade my printer stopped working.
View 14 Replies
View Related
Nov 30, 2010
I'M Batty from Tanzania ,i have question on printer sharing between linux GNOME(FEDORA) and windows xp how is it possible?i had my HP printer connected on Linux and i need to make network sharing for the printer .please give me support.
View 4 Replies
View Related
May 14, 2010
What are the steps for configuring a printer on Fedora?
View 5 Replies
View Related
Feb 8, 2010
I've just upgraded my main file server from 10.3 to 11.1 by DVD (I did *not* have a chance to do a zypper up after, so it's the base 11.1 install), and in upgrading my Samba from 3.0.23b to 3.2.4, I seem to have broken winbind resolution of group names. wbinfo -g shows all the right group name entries, and getent group shows that they map to the proper GID numbers... it's just that ls isn't seeing them: I get domain usernames, but the group column is 5 digit numeric GIDs in my defined range. I infer that something broke PAM, but I'm not enough of a PAM jockey to know what. I don't have a pam.d/winbind, but I'm not clear that I'm supposed to. I see that the four pam.d/common-* files were touched, but their contents are the same as the older ones I have.
View 6 Replies
View Related
Oct 12, 2010
I have a 1920x1200 monitor that was displaying correctly under 10.4, and after the upgrade to 10.10 it is displaying at 1280 x 720 (the highest resolution it has), and does not list 1920x1200How can I ask 10.10 to display at 1920x1200?
View 8 Replies
View Related
Feb 11, 2010
I just upgraded to lenny (stable) from a working etch system. It went pretty nicely but I'm having a problem with the print system.
Ok, I have an HP Laserjet 4M+ connected to my system by USB. (I have another color printer too and a scanner but I don't use them often).
I use CUPS. I never bothered with the HPLIP packages because straight cups has always worked well.
What happens now is that I'll send a job to the printer and nothing will happen. The printer won't get it. Looking at CUPS on the localhost:631 page I can see that the printer is on, connected, ready; the job is there too but just stuck on "processing".
Now here's the thing. If I manually load the ehci_hcd module with "modprobe ehci_hcd" then the job will make it to the printer and it will print.
I can't just make that module load at boot time because if I do and the printer is off, it doesn't work. (I have to unload it and reload it). For whatever reason, I have to make sure that module gets loaded AFTER the printer is turned on, or nothing gets sent to the printer!
View 10 Replies
View Related
Jul 23, 2010
I have an Epson Stylus Photo PX710W. It worked fine in opensuse 11.2, but I've now done a fresh install of opensuse 11.3 and I can't get the printer to work. I set it up as for 11.2, so I'm sure it should just work.
CUPS job page says:
stopped
"/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper failed"
and CUPS error log says:
PID 1294 (/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper) stopped with status 127!
While the scanner also isn't working, I think this is a separate issue as the CUPS log seems to suggest it is connecting to the printer, + I'm using network and usb connection.
View 2 Replies
View Related
May 28, 2011
I have no problems accessing files, with the windows shares. The only problem is getting my printer to mount. Here is the trouble shoot log, I didn't fine the problem till, I tried to print something.
Quote:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Choose printer):
{'cups_dests_available': [], 'cups_queue_listed': False}
[Code]....
View 2 Replies
View Related
Dec 5, 2009
I have googled this and I refuse to believe the answer is "older video card" or "ubuntu". Does anyone know what boot parameters to use or how to get Fedora to start the install process in a resolution other than the "Optimum resolution"? resolution=640x40 vga=ask. These do not work. They set the debug display but when the graphical portion starts it defaults to the "optimum resolution" and the message displays "Cannot Display This Video Mode". As you consider the answer, think this is a new computer, blank hard disk, etc. I am installing Fedora 10. Tried 11 and Vista seems less buggy, prefer 10 or 9.
View 9 Replies
View Related
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
Sep 22, 2014
A couple of days ago I followed a guide online in order to install Adobe Reader and this guide recommended a specific package that needed the jessie repository, I added it (unaware the jessie was the name of the new distribution on testing) and so I found myself upgrading to Jessie, which is fine since is working quite alright, but since then I can't sent any document to my wi-fi printer.
I had no problem with Wheezy, I installed two printers: one connected to the usb interface and the other one to the wifi (but is actually the same). With Jessie when I try to print something and select the wi-fi one nothing happens. If i try to add a new one I can't since debian doesn't find it and I can't even delete the old "malfunctioning" one.
View 1 Replies
View Related
Jul 2, 2011
after my update to 11.4, I am having trouble with my printer.
hplip is installed (3.11.5), but it does not start the printer queue. If I click to start the queue, it seems to start, but no printing jobs are sent to the printer.
opening the hplip gui spits out an error message: device communication error 5012
View 9 Replies
View Related
