OpenSUSE Hardware :: 11.2 Upgrade To 11.3 - Epson Printer Broken

Jul 23, 2010

I have an Epson Stylus Photo PX710W. It worked fine in opensuse 11.2, but I've now done a fresh install of opensuse 11.3 and I can't get the printer to work. I set it up as for 11.2, so I'm sure it should just work.

CUPS job page says:

"/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper failed"
and CUPS error log says:
PID 1294 (/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper) stopped with status 127!

While the scanner also isn't working, I think this is a separate issue as the CUPS log seems to suggest it is connecting to the printer, + I'm using network and usb connection.

View 2 Replies


OpenSUSE Hardware :: Printer Is An EPSON WorkForce 610 C11CA50201?

Jan 24, 2010

I ordered a new printer yesterday... I am intending on using it with my Macs, but I am thinking I may want to print on it from my HP netbook running suse linux..The printer is an EPSON WorkForce 610 C11CA50201.

Does wifi printing work on linux? I haven't read anything saying it does, nor have I seen anything that says it doesn't.I also wanted to know if wifi scanning worked.

View 2 Replies View Related

OpenSUSE Hardware :: Epson Stylus NX110 - Printer Does Not Have Drivers

Jan 20, 2010

I'm new to openSUSE and have only used Ubuntu. I have a Epson Stylus NX110 all in one printer. All I really care about is the print capabilities, scanning is a secondary issue. Suse recognizes the printer but doesn't have a driver for it. On Ubuntu I had to use the NX105 drivers but they worked just fine.

View 3 Replies View Related

OpenSUSE Hardware :: Can't Install Pipslite-1.4.0-5 For An Epson Workforce 610 Printer?

Jul 25, 2010

I downloaded the .rpm file for pipslite-1.4.0-5 and tried to install it using YaST, but it needs "". I was given the error "nothing provides needed by pipslite-1.4.0-5.i386. I am currently running 32-bit OpenSUSE 11.3. Can anybody help me with installing pipslite? I googled libgdk and I notice that it's in gtk+, but I don't know how to install that either.

View 7 Replies View Related

OpenSUSE Hardware :: Epson CX7800 Printer Scanner Not Detected?

Aug 2, 2010

I have an epson cx7800 printer/scanner that 11,3 doesn't detect on USB. I tried Yast-Hardware-printers and Yast-Hardware-printers and nothing is discovered/detected.

Are there repos for this stuff and is there a tutorial like the one for graphic card theory I could peruse?

View 3 Replies View Related

OpenSUSE Hardware :: Epson SX205 Printer - PPD Version Not Compatible

Sep 7, 2010

I'm trying to configure my SX205 printer. It is well recognized, and Gutenprint driver are available. But the printer doesn't work, here are the error messages :
The PPD version (6341210) is not compatible with Gutenprint 5.2.5.
I am on opensuse 11.3; so the gutenprint version is 5.2.4, i don't know why it talk about 5.2.5. I have tried cups-genppdupdate but it doesn't change anything.

View 5 Replies View Related

OpenSUSE Hardware :: Driver For Epson Printer USB DX6050 Required?

Nov 14, 2010

I tried to configure this printer and clicked on "add printer" but the drop down menu did not contain my printer. Does this mean that the printer driver does not exist?

When I tried to print out a test Open Office document it came up with "printer error" However Open Suse did recognise my printer as a DX6000.


View 1 Replies View Related

OpenSUSE Hardware :: Epson Stylus NX420 Printer Driver?

Dec 29, 2010

I am searching for a printer driver for my Epson Stylus NX420 Printer/Scanner. Should I use a generic Epson driver from the extensive default list, or is there a better driver out there? re: I'm running OpenSuse 11.2 and KDE

View 1 Replies View Related

OpenSUSE Network :: Setup Epson Stylus Printer With CUPS?

Sep 21, 2010

I want to setup my Epson Stylus (515W)-A letter before the 5 but not sure what. Basically when I open CUPS I click on add on new printer, I enter add printer but then the page says access denied. Also this is a network printer.

View 2 Replies View Related

Hardware :: Epson Stylus NX510 Printer Not Recognized In OpenSuse 11.3?

Sep 4, 2010

I got my Epson stylus NX510 all-in-one printer (just the actual printer worked, couldn't get the scanner recognized) working in Ubuntu Lucid Lynx. I'm currently attempting a dual boot with OpenSuse 11.3, but when I go to download the driver for it like I did in Ubuntu (and it worked) I get the following error messages:

(I'm downloading epson-inkjet-printer-stylus-tx550w-series-1.0.0-1lsb3.2.i486.rpm)

[PK_TMP_DIR|dir:///var/tmp/TmpDir.nT6NON] Repository already exists.

failed to install file: [PK_TMP_DIR|dir:///var/tmp/TmpDir.nT6NON] Repository already exists.

I have no idea what that means. I would be very very grateful if someone could assist me in getting this stupid thing up and running.

View 5 Replies View Related

OpenSUSE Hardware :: Epson Workforce 610 / Printer Is Found On Network But Still Can't Print?

Nov 26, 2010

I've got 11.3 Gnome on my lenovo desktop and I'm trying to connect an Epson Workforce 610 via a wired network. I installed the driver from AVASYS and Linux Standard Base in accordance with instructions. The printer is found on the network but I still can't print.

View 9 Replies View Related

OpenSUSE Hardware :: Setting Up Epson Stylus SX420W Printer / Scanner

Mar 17, 2011

I am trying to set up my Epson Stylus SX420W printer (via USB) on a fresh install of 11.4. I have found a driver called 'epson-inkjet-printer-nx420-1.0.0-1lsb3.2.x86_64.rpm', which I guess is right for my Intel Core i5-system on the Avasys-site that Epson refers to for Linux drivers.

I have downloaded the driver and installed it via Right-Click -> Open With -> Install/Remove Software, which seemed to go well. When I open Yast -> Hardware -> Printer -> Add, my printer is found all right, but 'No matching driver found'. Iam quite new to Linux.

View 9 Replies View Related

OpenSUSE Hardware :: 11.4 Refuses To Recognize Epson Stylus Color 600 Printer?

Mar 24, 2011

In 11.3 I used an Epson Stylus Color 600 which worked well enough.

Now I'm quite disappointed that this so called 'best version ever' (11.4) refuses to recognize this printer.

The modules parport, parport_pc, and lp are all loaded. My printer is on and connected, but OpenSuse claims that there is nothing.

View 9 Replies View Related

OpenSUSE Hardware :: Epson Stylus Sx218 - After Restarting The Printer Can Not Print

Aug 7, 2011

I have epson stylus sx 218. I installed drivers from avasys and tried to configure it in [url]. The first test page was good but after restarting the printer can not print.

View 6 Replies View Related

General :: Install A Printer On The Parallel Port? The Printer Is A Epson LX-2170?

May 14, 2010

My Operating system is Ubuntu 10-4 that I have just installed.

View 6 Replies View Related

Ubuntu :: Epson Printer Not Working?

May 4, 2010

I have been using the Lucid since about Xmas time as my main Distro. Up until Sunday when I did a fresh Install of Lucid 10.4 final release my epson printer was working, now it isn't even listed in the printer list, but it is still found with lsusb.

View 3 Replies View Related

Fedora :: Epson Dot Matrix Printer Installation In 12

May 22, 2010

I have installed fresh fedora 12 & installed many softwares in rpm & tar forms , also i used yum to do installation, all these attempts were successful. But i could not install & configure Epson Dot matrix FX-2175 printer. Epson Dot matrix FX-2175 printer worked fine in my earlier distro fc11.

View 4 Replies View Related

Ubuntu :: Epson Stylus T11 Printer Not Working In 10.04

Aug 16, 2010

I have a Epson stylus T11 printer. It used to work fine with Ubuntu 9.04. After I upgraded my OS to 10.04, it is not working.

Here is my output.

It says its printing but doesnot print anything. I have tried a lot of forums including LQ, but no solutions.

The lsusb command gives me the follwing:

View 2 Replies View Related

Ubuntu :: Printer Epson Stylus T11 Not Working In 10.04

Jun 8, 2010

I have been using epson stylus T11 printer on ubuntu 9.10 for about six months, but after I upgraded it to 10.04, the printer is not working properly. It is working fine with other distributions.

View 1 Replies View Related

Debian :: Installing A Printer Drive Epson TX100?

Mar 7, 2010

This is a file for printer drive Epson TX100, does any one know who to install it?

the original was :

View 2 Replies View Related

Ubuntu :: Epson NX420 Printer With Working Scanner

Dec 5, 2010

I've been trying to get my Epson NX420 printer to scan for about three months now, and I finally got it working. Here's how:
1. Go to [URL] and search for your printer. Select distribution and version and answer a couple of other questions.
2. Download pipslite_1.5.0-2_i386.deb, (or the 64-bit version), and all the iscan*.deb files (again, appropriate to your system).
3. [CRITICAL] Go to [URL] and download this 8.04 package which worked just fine for me on 10.10.
4. Use the Software Center or GDebi or sudo dpkg -i the .debs in this order:

1) libtdl3, which is a dependency for Step 2.
2) pipslite
3) iscan-data
4) iscan-network
5) iscan
(If you use a USB connection, you don't need the iscan-network file.) This got my NX420 scanner up and running just fine. Installing libtdl3 was the key; in fact, I used the Debian Lenny package.

View 9 Replies View Related

Ubuntu :: Where To Get The Drivers And Install Epson Workforce 520 Printer

Nov 5, 2010

I bought an Epson workforce 520 printer and I need to install the drivers to make it work on Maverick Meerkat. where to get the drivers and how to install them.

View 9 Replies View Related

General :: Epson Sx100 Printer - Access To Ink Cartridges?

Nov 29, 2010

using "pclinuxos"my all in one epson sx100 psc is installed and working ,as is the scanner,they are both configured in the control center,?? how do i view the ,"change ink,clean print head options please" .you may have read an earlier post from me (now clicked as solved) when i was using "mint 9", i never did get it to work,

View 1 Replies View Related

General :: Epson Printer Do Not Work After RedHat Update

Nov 1, 2010

Since 2009 we are using Linux Redhat and all printers are working well. But when I have done Redhat's UPDATE I found all matrix printers (Epson LQ-590) not printing. Those printers are connected to the network by a printer server. When I do "lpr -Pprintername /etc/hosts" the printer prints the file but it not formats characters.

To print from my application, I create a file driver which looks like
"lpr -PP112" in /usr/spool/uv/
The first version was looked like
# $6: Imprimante (nom Universe)
export LOGFILE=/tmp/uv-smbprint-$6
date > $LOGFILE
echo $6 >> $LOGFILE
cat - > /tmp/prn.$6.$$
cat /tmp/prn.$6.$$ |lpr -P $6 -o raw -h >> $LOGFILE 2>&1
rm -f /tmp/prn.$6.$$
exit 0

Now this old version works with the HP LaserJet printers. But on the matrix Epson printer it can't work I put lpr - Pprintername or lp
-onobanner -Dprintername to print something.
The problem steel in formatting text when I print on all matrix Epson printers.

View 2 Replies View Related

Ubuntu :: Why Can't 9.10 Find My Epson TX110 Printer/scanner?

Apr 29, 2010

I can't use my printer/scanner - it is an Epson TX110. When I try to use Image scan - I get the message; "Could not send the command to scanner. Check the scanner's status."

There is nothing wrong with the MFC apart from not working on Ubuntu 9.10. I have had it connected to another computer that ran Ubuntu 9.01 (I think that was the release used) and it ran fine but now I'm stuck -

I have drivers installed but cant get them to co-operate with me.

View 2 Replies View Related

Ubuntu :: Epson SX100 Printer - On / Off Light Keeps Flashing But Can't Get Anything Else To Function

Mar 10, 2010

I have an Epson SX100 multifunction printer which is a year old but rarely been used. The on/off light keeps flashing but I can't get anything else to function. The cartridges move into place but if I press any of the buttons nothing else moves - can't print, scan or photocopy - no other lights showing. Have to pull out the cord to turn it off.

From previous Epson printers I've had I know there are ways to override cartridge empty lights etc and wonder whether someone knows how to re-set this printer. Have had an online chat with Epson but as soon as they know it is just out of guarantee they point you in the direction of the repair shop and it is just not worth paying for a repair as it would cost more than the printer.

View 9 Replies View Related

Ubuntu Networking :: 10.10 - Epson Artisan 835 Network Printer Not Found

Dec 30, 2010

I have an Epson Artisan 835 network printer hooked up to my desktop. I am running a wubi install of 10.10 and cannot get it to find the printer. I previously had an artisan 830 and it worked fine, however, this new printer is not recognized in the add printer application. So far I have install LSB 3.2, and then installed the rpm package for the artisan 835 using alien -i. Now I am at a loss for what to do.

View 3 Replies View Related

Hardware :: Download Drivers / PPD File For Epson Lq-590 Dot Matrix Printer?

Feb 3, 2011

where can i download linux drivers / PPD file for epson lq-590 dot matrix printer? I have tried printing with the driver for epson lq-570+ but the print quality is not up to the mark

View 1 Replies View Related

OpenSUSE :: Apache2 Broken In Upgrade From 10.3 To 11.1?

Aug 23, 2009

A recent upgrade from 10.3 to 11.1 went remarkably well --however, Apache (integrated with osCommerce), was broken:

tall:~ # uname -a
Linux tall #1 SMP 2009-08-15 17:53:59 +0200 x86_64 x86_64 x86_64 GNU/Linux


View 6 Replies View Related

Fedora Installation :: How To Install Epson DX8450 Printer On Acer Aspire One?

Mar 6, 2009

I wonder if you can help me please. I purchased an Acer Aspire One netbook running Linpus Linux on it for my daughter. She absolutely love it and so far I have managed to update Open Office to Open Office 3.0.1, installed Skype and installed Firefox 3.She has been doing her homework and would like to print it off but I can't get my Epson DX8450 to work with it. I tried installing drivers from (which is where Epson tell you to go). I installed some drivers and the printer started to print it was doing some strange things like printer two lines of the same single line, missing the top off the letters and putting two line spaces in between each line.

I am all new to this but does anybody advice or even provide step by step instructions on how to install the printer (if they have this model printer themselves).Also how to I remove the drivers that I installed last night that obviously are incompatible?

View 1 Replies View Related

Copyrights 2005-15, All rights reserved