I have a HP Officejet G85 and I just upgraded my system, which included the whole printer subsystem, and lost my printing. I have tried adding it via KDE's print dialog as well as directly via CUPS (localhost:631), to no avail.
I have searched all over the web for a couple of days, and can find similar stuff, but no resolution. I think it may be new (I just upgraded most of my system) in the latest releases of cups/hplip/.etc. Also, after the upgrade my hp-toolbox quit working, telling me I don't have qt4 installed, which I do.
I dist-upgraded my Debian unstable and 'cups' removed the official drivers ('cndrvcups-common_2.00-2_i386' and 'cndrvcups ufr2-uk_2.00-2_i386'). Well, now my network Canon i-SENSYS MF4120 multifunctional printer/scanner doesn't work and the drivers can't be installed back
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
I'm trying to setup a headless CUPS server, but no matter what I do, I can't add a new printer. Not using the web interface, or the GUI of another computer connected to the CUPS server.I always get to the point shown in the attached screenshot, and then I am asked for a password, which never works. I've practically slaughtered my cupsd.conf, and it now looks like this:
Code:
LogLevel info # Allow remote access Port 631 Listen /var/run/cups/cups.sock
[code]....
it looks like the above should tell CUPS to never ever ask for authentication, but as you can see in the second screenshot, it still does!
I have a wire network connection to a printer over my Lan. It is an HP 3210 All-in-One series. Can someone tell me whether cups is capable of printing to this printer? Or do I need to use HP's drivers (:::shudder::?
Is it possible to setup a printer without cups, most of Linuxes try to setup cups, which is basically for Notworks, but it really doesn't help much with a stand alone and more of nuisance and a hindrance.
whose still learning the ropes, I've installed a new printer on my Debian (2.26 version, unstable, tho' duly updated ) - a HP Photosmart C4600 ,through CUPS and all [b]seemed[/b] well ... applied /etc/init.d/cups restart.Result: it appears to oblige for a moment then straight back to 'STOP' mode so that I can't even get a test page printed.I'm at a loss to know what the issue might be, except if the message coming up on the CUPS admin page - "Filter "foomatic-rip-hplip" for printer "Printer" not available is of any pertinence: I've tried getting/installing/enabling such but -no joy.s
I'm trying to get cups-pdf to work. I'm working on adding the virtual printer through http://localhost:631, but when I try it asks for my password. I cannot use root because I have locked it out and currently use sudo with my main account. To make changes using my main user account credentials, do I need to add that account to some "printer admin" group, or something?My sys info, in case it makes a difference:Debian Lenny amd64, Xfce desktop
Running Debian 5, fairly new install. I have CUPS 1.38 installed. After much work, I got a PPD file for a Dell printer working - albeit not the exact one I need (5330dn), but close enough to work (3100cn). Question: when I look at the list of printers in CUPS, I see a bunch of extra printers that are on the network, but that I didn't add. How do I remove them (ie. I don't want them to be listed)?Going to Administration | Manage Printers shows me a black button named "Delete Printer", but clicking on it gives me an error message of:
Ok, while I'm here, I'll ask 2 other simpler questions: (2) anyone have the .ppd file for the Dell M5330dn printer? I've spent 90 minutes on the phone w/ the Dell tech support, and those guys are clueless....
(3) I have 4 printers of the same model. the first is working - is there an easy (command line) way of adding the other printers? Ie. can I just copy the /etc/cups/ppd file 3 times, renaming it to my other printer names (and ip addresses)?
I am hard time printing to one particular Canon IR8500 printer Red hat.WE are using CUPS to manager around 30 printers.when I try to start the printer from CUPS, it comes back immediately to Printer State: Stopped, accepting jobs..After I delete it and redefine it, the status says Idle, but as soon as I submit a job, the status change to 'Stopped'.
I'm working on CUPS server here now, I am new to the whole Fedora area, I'm starting to like it, tackling one service after the other. I have cups, which I don't recall installing but was there guess its a default. So I added a printer on my server, that was on a 10.0.1.1 block, added it as lpd://10.0.1.1/lab3printer. Ok that worked and printed from my server, but my problem is when other machines try to add the printer. I continue getting this problem Alberto "recoverable: Network host '10.0.11.25' is busy; will retry in 30 seconds..." On the computer it was added as printer lpd://10.0.11.25/alberto because my server has that IP and printer well named it alberto. I followed what this said with the xined.d [URL].
I have an HP J6480 "all in one" printer, suse 11.2, hplip, wireless network, the printer only prints when I start the printer que each session using the root user ... where do I find the instructions to setup the printer que in cups or is there a setting in hplip that does this?
So I have a Zebra S4M label printer that I have managed to get mostly working under CUPS. To make that work, I have the printer upgraded with the latest firmware, CUPS 1.4.1 with its AppArmor profile disabled and the Zebra EPL/ZPL ppd file that's floating about the internet loaded into cups. The printer is connected via USB to the computer, and is set up in cups using ZPL. The computer acts as a print server for other computers, and everything seems to work ok, with one exception. When the printer runs out of paper or runs out of ink ribbon, the printer stops and displays an error on screen, but CUPS never stops. It keeps taking jobs, sends them to the printer and reports that everything is A-OK. It appears at a certain point, the printer's memory gets full and then CUPS sort of hangs.
But it still doesn't display and errors or stop the quque, it just starts this weird behavior where it eats jobs or combines them into one giant job that it just sits on. What I need is for CUPS to know that the printer is out of paper or ribbon and pause the queue until the error status is clear. I know that this printer is communicating its status in some way, as when it's connected to a windows machine, the print queue stops when the paper runs out. How to get CUPS to recognize the printer status so that I'm not losing jobs? I've tried digging through the debug logs but there doesn't seems to be much help there. I do notice that from time to time CUPS says it's discarding "unused printer status changed" and "unused job progress" events but other than that, nothing I see of interest.
My work has switched to Fuji Xerox printers, which up to today I've been able to print to simply by sending a PostScript file to their IP addresses. But as of today printing requires a login. Here are the (Windows) instructions:
"Start>Settings>Printers and Faxes>R-Click on the printer>Properties>Configuration>Accounting>Change the dropdown box �Use Login Name� to �Enter owner name�>Type in your staff ID number in the User ID box e.g. �e*******�>OK>Apply"
how do I apply this to CUPS? Where can I find an owner name in CUPS?
I am trying to connect a Brother HL-2230 printer over CUPS on an Ubuntu Lucid box. However, when I attempt to add the printer using the web interface (localhost:631/admin) the printer is missing from the page that asks me to choose the driver; however, many other Brother and HL-series printers are listed. My question is, how can I get my printer to appear on the driver list (and yes, I installed the manufacturer's CUPS and LPR drivers)?
When I try to print something there is only some led blinks on printer and nothing is print. I am using drivers from brother(cupswrapper). I am using CUPS 1.3.11. I didn't have any problems on my previous installation of slackware(but I don't know which driver I've used).
Printing was working without a problem until I had to cancel (rudely by switching the printer off in mid-print). Since then I have been unable to connect, through CUPS, back to the printer.lsusb detects and shows the printer is connected.
Code: Bus 001 Device 005: ID 04b8:081e Seiko Epson Corp. MFP Composite Device Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I am running Slackware 13.1 64bit and the cupsd config is the one pretty much the default. I can connect to it from my browser at http://localhost:631 and play around with the options with no problem. I have been following a previous post on configuring a PDF printer [URL]. I am at the point of using lpadmin on the command line to create the pdf printer with the adobe distiller ppd file. When I try to do so it just hangs and eventually I get a connection timeout. When I do an lpinfo -v I get the same thing. If I try lpinfo -h localhost:631 the request returns immediately with nothing. I tried to create the PDF printer through the cups web ui but I did not get far.
I'm running Red Hat Linux and CUPS 1.2.4. I can print a test page to a Win 7 shared printer ok. However, when I issue the lpr command from a user or root, it won't print. The CUPS message is "Remote host did not accept data file (1)" and the job just hangs till I cancel it. The only thing I can tell that is different is that when the test page from CUPS is generated, it uses user "guest". When I try to print it using the lpr command, the user is "eddie" or "root". I tried adding a user account named "eddie" to the Win 7 box, I can print successfully from both CUPS and users on several other Win XP boxes.
I've been at this mess pardon my french for a few hours and i'm still going nowhere, original thread posted over at archlinux forums:Since my printer isn't visible on my server (works just fine on my client) I tried to manually add various URI (tried em all) and I went from "printer location not found, waiting for jobs, to printer isnt running".
In my opinion it should be working but it's not, i've read the linux printer database/various linux forums/#cups on freenode (idled for 2 days no response)/gentoo wiki/forums and the old tool "google" but most of the "hacks" I tried didn't work.There's a lot of google links with issues similars to my own and alas they are all unresolved, is this a typical problem with unix/CUPS over servers/network?Why is it so difficult for CUPS to detect my printer over my server?
Is it possible to use CUPs to share an already networked printer using IPP? The printer itself uses IPP.I know at first look this may seem like a silly thing to do, however I have a special case to set up a "print proxy server" due to security compliance reasons
I'm using Debian squeeze and for an assignement, i have create 2 virtual pdf cups printers. Both are working very well. To test the different administion command; i try to disable one of the printer and move his queue file to the second one. I'm able to do it easily.
Now, i wish to write a bash script that wil test the status of the printer. So that,if the printer is disable, it just execute the "move" script. Is there a way to know the status of a cups printer and use that information in a script?
For example, a command/function that can return "O" is the cups printer is enable and "1" if not.
I am unable to figure out how to set up a net work printer with new squeeze installation. I have used cups ver 1.3.8 on lenny and have never had any difficulty, this new version 1.4.4 I'm unable to gain any ground with.I did a purge and re-install with no luck?
Our Canon MX340 printer is WiFi connected using an IP address. This works well except that whenever the printer is turned off (for any reason) it chooses another IP next time it is turned on. As near as I can tell, it has two IP numbers: 192.168.1.64 and 192.168.1.65 Is it possible to enter both in the CUPS configuration so that CUPS will find the printer whichever number it is using?
I have a Fedora 11 box with an HP Laserjet 1000 (connected by USB) a Windows XP machineBoth are on the same network. I am desperately trying to share the printer to the Windows XP box using IPP. The Windows XP machine recognizes the printer queue, configures correctly and then ... nothing. It simply does not print ! Printer sharing worked perfectly in Fedora 10, with CUPS 1.3, but something seems to have broken.I used the guide available at this adress and tried all mentionned possibilites
I have taken a break from using Fedora, but since getting my netbook Ive decided to dual boot with Windows 7 Started (warranty purposes) and Fedora 14 with Fedora as the default boot OS. Now Ive got my home network setup as follows:
Gaming laptop, Windows 7 Pro x64, external powered USB hub with 1.5TB HD with shared folders through windows share permissions and the HP Deskjet F2430 printer
Netbook 1, my wifes netbook, Windows 7 Starter, has 100% access to the windows shares and the printer.
Netbook 2, my netbook, Fedora 14 has windows shared folder access but no printer access. In Windows 7 Starter has access to windows shared folders and printer access.
All of them are wirelessly networked through my Linksys WRTG54GS thats flashed with DD-WRT Mega firmware. The only laptop that has a hardwired connection to the printer and HD is my gaming laptop. how to go about allowing this? My printer doesnt show up in the CUPS wizard.
