I can not install a driver for device EDUP WU2070. I have a disk with a driver for linux general. I don't know how to compile a makefile. My OS 11.3v doesn't see a device.
But when I run in Live CD mode all drivers install automatically and my WI-FI device work properly.
How do I configure a EDUP wireless network card
View 1 Replies View RelatedI am trying to install EDUP 802.11n Wireless USB Install (RTL8188SU) on my recently installed ubuntu platform and I need a driver for it. I downloaded the one from the Realtec website and I got a bunch of files that I have no idea what to do with them. (h[URL]... I am compleatly new at Linux and I have no idea how to install anything. I am pretty nifty with Windows but this is my first time trying Ubuntu and Linux. So can I have some step by step guide to install this. I am good at following clear instructions correctly.
Aditional Info: I tired the hardware thing already or whatever its called and only NVIDIA drivers are there and my USB is not recornized because it needs a driver.
I'd like to know how can I find a Linux wirelles driver for wireless Belkin card.
View 1 Replies View RelatedWhere can I find a driver for this pc wireless card? And how do I install it?
View 1 Replies View RelatedI'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies View RelatedWhere can i find driver for Dell Wireless 1397 802.11b/g Half Mini Card. I'm using CentOS x86_64.
View 9 Replies View RelatedI have been running F13 since it came out, with the wireless working fine since I got it working (using the RPM Fusion repository, broadcom-wl-5.60.48.36-1.fc13). Since I updated software (without reading what was to be updated), yesterday, I am unable to even find wireless networks, although I am, as you can see, able to access through eth0 It is not a hardware problem, as I can not only find them, but access them on Ubuntu 9.10 live disc. Below is my lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[code].....
i have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies View RelatedI am trying to get the wireless working on a fresh install of F13 on my HP probook 6450b. The wireless button above my keyboard is amber, when I press it i see the following in /var/log/messages :Quote:ep 29 11:32:43 localhost kernel: atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).Sep 29 11:32:43 localhost kernel: atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it
View 9 Replies View Related1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
I have tired everything I know how to do and I can not install the driver for the rtl8191se. I read the instructions that say to run:
sudo make
I have been through this before with Fedora. Ubuntu supported my wireless card but not my display so I am switching to this OS. Does anyone know how to install the driver on 11.4 suse?
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011> sudo makemake -C /lib/modules/2.6.37.1-1.2-desktop/build M=/home/joecamel/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011 modules
make: *** /lib/modules/2.6.37.1-1.2-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011>
I'm very new to openSUSE, so I need easy, clear instructions on how to install the driver for RaLink RT2561T wi-fi card. I have the driver and everything, I just don't have a clue on how to install it!
View 5 Replies View RelatedI have just installed openSuse 11.4 and have been trying to get my Edimax EW-7711In wireless card to work. I have downloaded and installed NDISWRAPPER but when I type ndiswrapper -i /path/to/rt2860.inf I get a message saying that this is the incorrect driver. However this driver drives the card for both Fedora 14 and Ubuntu 10.10, both using ndiswrapper, so what may be the problem with openSuse 11.4?
View 8 Replies View RelatedI have installed open suse 11.3 with no issue, but I can't find the dirvers for the wireless network card/
Wireless, Half Mini-Card, DW1520
I cant get openSuse to find my wifi adapter or it does not have the driver installed.
My wifi adapter is the Realtek RTL8191SE 902.11b/g/n
I found a linux driver on the internet, but it asked me to run make in the console and when I did so it said that it couldn't find make.
how to install make from openSuse without the internet (I'm using my windows partition).
Recently I purchased for few bucks on eBay a wireless network adapter with name "EDUP 802.11N". This thread explains how to setup this device on Ubuntu. I inserted USB wireless adapter on Windows XP and it was recognized as "Realtek RTL8188SU Wireless LAN 802.11n USB 2.0 Network Adapter". Windows didn't have any problem to install its driver automatically but for Ubuntu I had to give some additional effort.
After that I went on Realtek official site (www.realtek.com.tw) where I found that this device is supported on linux platform, downloaded and compiled linux driver. This driver (kernel module) is for kernels from 2.6.18 ~ 2.6.33. Unzip this file and in "drivers" subfolder there is driver archive (tar.gz).
Code:
>cd rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100625/driver
>tar zxvf rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20100625.tar.gz
>cd rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20100625
>make
>./clean
[Code]...
For several months I was using EDUP adapter with both my laptop that operated on Ubuntu 9.04 exclusively and a desktop that could also boot with XP. Soon after 9.10 was released I updated my laptop and was able to use the adapter to connect to the Net.Recently, I also updated the desktop but also made it exclusively a Linux machine. Unfortunately, I have been unable to get the wireless adapter to work again on the desktop.The OS recognizes the device as wlan0, and lsusb shows:Bus 003 Device 005: 0cde:0008 Z-Com Sitecom Wireless Network Adapter 100G+ WL -125The network manager recognises the availability of the wireless network and attempts to connect. After trying for a while it comes up with a dialog box "Wireless Network Authentication Required" and in response I enter the WPA password but with no success.The behaviour would indicate that I am entering the wrong password but I am not.I have checked it several times and compared with the password that works with the laptop.
View 3 Replies View RelatedI just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
How can I find the right driver for my graphic card? I have nvidia FX 5500.
View 1 Replies View RelatedI have a HP Pavilion dv7 laptop. Can you please tell me how can I find the right driver for my sound card? When I play a mp3 via vlc in ubuntu 9.10, there is sound, but the quality is bad. And I play the same on Windows7. It plays fine.
View 9 Replies View RelatedI am setting up Fedora 13 on a Dell optiplex 755 with the following video hardware installed:
/sbin/lspci -nn | grep 'VGA|NV'
03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [FireMV 2200 PCI] [1002:5965] (rev 01)
How can I find/install the right driver for this video card?
It found it in 10.04 on its own, in 10.10 will it do the same?
something went wrong with my upgrade I'm running in safe graphics mode even though I'm in my regular desktop session.
how to configure squid in linux redhat & also how to fid out n/w card driver
View 2 Replies View RelatedWhere do I get the driver for installing my wireless card- BCM4310 (Broadcom Corporation) in Centos05? I'm not able to find one.
View 3 Replies View RelatedHow can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies View RelatedI am completely new to linux so a lot of this has been foreign to me. I have ran the lspci command to find out my wireless card is Broadcom Corporation BCM4313 and I found the driver for this card at:it won't let me post the URL for some reason...but i googled "Broadcom BCM4313 driver for linux" and it's the first link.I downloaded the 32-bit driver but now I have absolutely no idea what to do.The download has folders named lib and src, and a text file called Makefile.
View 3 Replies View Relatedcould some one please post a link to where i can find a driver for a NETGEAR WG111v2 wireless nic for mandriva 2010
View 4 Replies View RelatedI have RHL enterprise server 5.1, at time of installation LAN card didn't find, so I could not assign IP address. So please help me how to install driver of LAN card.LAN card in my system is,Intel corporation 82557/8/9[Ethernet pro 100]Please any possible solution for this problem, because I am new in linux environment
View 2 Replies View Relatedi just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies View Related