OpenSUSE Hardware :: Driver/ Backend For CanoScan 3000?

Mar 3, 2010

Have very recently installed Open S on my PC. As it's all really new 2 me have been strugling a bit to get things to work @ first. Now it's much better but my bleeping scanner won't work for love or money, apparently the Linux driver ( or should I say backend) for the thing has not been created. Its CanoScan 3000 and I still have the discs with Windows setup. Is there any way to get that thing work under Linux or should I get another scanner? Obviously, me writing the backend, is not really a very realistic option.

View 1 Replies


ADVERTISEMENT

Hardware :: Driver For Canoscan 3000 Ex For Ubuntu 10.04?

Sep 6, 2010

I cannot connect my scanner in ubuntu :S it is a canoscan 3000 ex and says to me that there is no support for linux.

View 1 Replies View Related

Red Hat / Fedora :: PNG Backend Error While Installing Cairo-1.6.0 - Requested PNG Backend Could Not Be Enabled

Nov 29, 2010

I want to install GTK+. I see there are also numerous dependencies, which i've been slowly tackling, and the Cairo package has been particularly difficult. It claims the following upon ./configure --prefix=/usr configure: WARNING: Could not find libpng in the pkg-config search path checking whether cairo's PNG backend could be enabled... no configure: error: requested PNG backend could not be enabled I've done some searching and found that libpng.pc is in my /usr/lib/pkgconfig/ directory and that the following commands don't do the trick:

PKG_CONFIG_PATH=/usr/lib/pkgconfig
export PKG_CONFIG_PATH

View 1 Replies View Related

Hardware :: Finding Dell Dimension 3000 82865G Graphics Driver?

Aug 30, 2010

I have an old Dell Dimension 3000 Desktop computer which used to run Windows XP but I installed Linux Ubuntu 10.04 32-bit onto it. It has a pentium 4 2.8Ghz, 1GB of ram(I think), a 120GB HDD...etc. Anyway, so when I install Ubuntu I try to install the graphics drivers for it. I go to intels website. There were two drivers available for Linux for my adapter:

the i915graphics and a intelgraphics driver. Both were tar.gz. When I try to install them, it can't for some reason. I tried "sudo sh" in terminal, I tried extracting the package and executing it...etc. Nothing works. It does give me a message in terminal though.

View 8 Replies View Related

General :: Error:backend-not-running Backend Not Running As Expected (yumex Will Close)

Mar 9, 2010

i installed yumex:yum -y install yumex, when i start yumex it came with this error:fatal error:backend-not-running backend not running as expected (yumex will close) how can i solve it?

View 10 Replies View Related

OpenSUSE Multimedia :: Hp Mini 110-3000 Mic Not Working?

Jun 4, 2011

I've managed to install openSuse 11.4, and have also managed to get the sound working properly, but the mic doesn't seem to be working.

My system is a hp mini 110 3000 netbook which came pre installed with windows 7. I'd install ubuntu on this before switching to openSuse, and in ubuntu the mic was working.

Also, I can't get bluetooth and the sd card reader working. I've got the ath9k driver installed, and WLAN works perfectly on that, but bluetooth doesn't.

View 9 Replies View Related

OpenSUSE :: Why Is Zypp-backend Dropped In Kupdateapplet 0.9.11

Mar 24, 2010

in KDE:Factory:Desktop you can find a new version of kupdateapplet. In the changes you can find the following:

- dropped zypp plugin (bnc: 590192)
- V 0.9.11

I have no access to 590192 in bugzilla, so can anybody tell me why the only real working backend is dropped? The PackageKit-Backend is not showing the updates from 3rd-party-repositories (packman or obs). Is there any possibility to get back the working 0.9.10?

View 5 Replies View Related

OpenSUSE Hardware :: Lifecam VX-3000 With Skype - Set Of Commands That Allow To Use My Webcam ?

Aug 11, 2011

Regarding the use of lifecam VX-3000 with skype. In this thread Microsoft lifecam Vx-3000 webcam - HELP

I found a set of commands that allow me to use my webcam within skype by running the following Code:

Unfortunately, it looks like I need to type in these lines every time I restart skype. Is there a way to automate the process, so that when I start my computer it executes the code before starting skype?

What this code does? I find it difficult to run commands without knowing what they do. Do you have to be a programmer to know about these commands or should everyone who uses suse know about that.

I switched from windows not long ago.

View 4 Replies View Related

OpenSUSE Multimedia :: Choppy Video With Intel HD 3000 Graphics?

Aug 19, 2011

I recently installed openSUSE on a new Toshiba and i'm getting very choppy video while watching videos on ....., justin.tv, etc. The video is fine as long as I don't full screen. However, when I try to fullscreen a stream on justin.tv or a ..... video, it instantly becomes choppy and video is extremely delayed in relation to the sound. The sound still continues at it's regular pace, however the video lags behind and is just choppy in general.Also, not sure if this helps, but i'm running an i3 2310M.

View 5 Replies View Related

OpenSUSE Wireless :: Card Does Not Work On Lenovo 3000 100n

Jan 30, 2011

I am trying to get the wireless lan to work on a Lenovo 3000 n100. Currently the light does not come on and the card does not work. Cnet says that this computer has an intel pro wireless 3945abg however /sbin/lspci -nnk Yields 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) ubsystem: Broadcom Corporation Device [14e4:0465] Kernel driver in use: b43-pci-bridge

View 9 Replies View Related

OpenSUSE Hardware :: Recompile SANE Backend To The Same Directories?

Mar 10, 2011

I recently bought scanner, the driver to which is currently in process and is not yet committed into the main repo, so I downloaded the new code and compiled it into /usr/local/ and openSUSE's YaST scanner configurer doesn't see the new versions and continues to work with the old ones.

View 9 Replies View Related

OpenSUSE Hardware :: SD Card Not Triggering PCI Backend After Boot?

Apr 21, 2011

When an SD card is inserted before/at boot time, everything works fine, meaning recognized by kernel and mounted to userspace.When an SD card is inserted after boot time, the kernel doesn't 'see' the hardware change not triggered, so no block device /dev/mmcblk0{p1}, so nothing to mount.This behavior is not openSuSE specific, when booting SystemRescueCD-2.0.1, the same behavior is noticed.SD card inserted after booting:

Code:
linux-j60s:~ # hal-device | grep mmc
linux-j60s:~ #

[code]...

View 5 Replies View Related

OpenSUSE Multimedia :: Configure Phonon's Xine Backend?

Jun 24, 2010

I have installed smplayer, and configured it to use the code...

Kaffeine (and dolphin's video preview) seem to use phonon's xine backend, and I can't find out what video output it uses. I'm guessing its plain old xv as it seems accelerated but turnes into a blue square when I move the window.

How do I tell the xine backend to use the same vo as smplayer?

OS 11.2 64 bit, KDE 4.4.4 (Factory)

(ps: I have a 'legacy' ATI graphics chip, xpress 200M working with the opensource radeon driver, which is brilliant btw).

View 2 Replies View Related

OpenSUSE Multimedia :: KDE 4 Phonon Xine-backend Configuration

Sep 6, 2010

So I have made an interesting Discovery with regards to using KDE4 Kaffeine version 1 and Dolby Digital 5.1. The basic problem seems that there is no way to configure the Phonon xine Backend in KDE 4 for use with Kaffeine version 1. There is however, a xine-config file located at:

Code:
~/.kde4/share/apps/kaffeine/xine-config

There appears to be no GUI way to change the default xine configuration (for use with KDE 4 applications) and while you can do so manually, the options seem bewildering, at least to me.

When you run xine-ui or Kaffeine/KDE3 there is an option to adjust the xine audio configuration using a GUI. Any changes made here are ignored by KDE 4 applications. As luck would have it you can copy the old xine configuration (adjusted by Kaffeine/KDE3) over the new one for Kaffeine in KDE4. The old text file configuration is located at:

Code:
~/.xine/config

If you were to use the old Kaffeine/KDE3 to adjust your xine audio configuration and then copy this file to the Kaffeine Version 1 KDE4 location, those changes should be used by the new version 1 Kaffeine in KDE 4. After Kaffeine/KDE3 audio settings work as you desire, open up a terminal session and make the following file copy. You must overwrite or rename the old configuration file for backup.

Code:
cp ~/.xine/config ~/.kde4/share/apps/kaffeine/xine-config

Since this new xine configuration is in the new Kaffeine version 1 KDE4 location, it may only modify how the new Kaffeine works and nothing else running in KDE4, but it is still an interesting find.

View 1 Replies View Related

Ubuntu :: Is CanoScan LiDE 600F Supported In 10.10

Apr 12, 2011

Is the Canon scanner .. CanoScan LiDE 600F .. supported in ubuntu 10.10?

This scanner works in Vista.

In ubuntu I ran ..

Code:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Then I searched through this ..

Desktop Hardware Incompatibility List

[url]

Quote:

View 2 Replies View Related

OpenSUSE :: Error - Nepomuk Was Not Able To Find The Configured Database Backend 'redland'

Aug 1, 2010

Installed 11.3 as new install on Thinkpad T42. I now have a persistent notification "Nepomuk was not able to find the configured database backend 'redland' ... what it means. System seems to be working but desktop icons have grey vertical rectangular box when selected. No objects to select in the boxes though. Previous version had tools available as I recall.

View 8 Replies View Related

OpenSUSE Multimedia :: Pausing Amarok With Phonon-backend-vlc Kills Sound?

Mar 29, 2011

Play a song in Amarok and then press the space bar to pause. Press the space bar again to resume and Amarok starts playing again with the status bar moving and the timer counting down, but no sound. If I move to the next song, sound starts working again. Or if I double click on a different song, sound works. If I use the xine backend, the problem goes away. I'm using Amarok-2.4 and KDE 4.6.1.

View 6 Replies View Related

OpenSUSE Multimedia :: Choppy Sound In Gnome - Installing Xine Backend ?

Jul 23, 2011

In Gnome and XFCE I always have a choppy music playback. The music is never played smoothly. There is always hesitations in the playback, as if the CPU is running on 100% and cannot cope with the system load.

One of the reasons for that is (in my case) Pulseaudio.

Another reason is Gstreamer. When I choose Gstreamer as backend in KDE, I get the same choppy musicplayback as in Gnome or XFCE. With Xine as backend in KDE, everything is fine. So my conclusion is: with Xine, the sound would be fine in Gnome too.

So, I wonder if it is possible to use Xine as backend in Gnome too. Does anyone have experience with running Xine in Gnome and/or XFCE? What do I need to do to set Gnome/XFCE, so that it uses Xine instead of Gstreamer?

Or is there maybe a special setting, I have to apply? In gstreamer-properties I have tried all possible settings, but this didnīt change anything to the quality of sound.

My experience is also: this choppy sound is hardware-independend. It doesnīt matter which hardware I use, the sound is choppy. It is also distro-independend. The sound is choppy in openSUSE (gnome and in KDE with applied Gstreamer backend), in Ubuntu, Xubuntu, Fedora with Gnome, Linux Mint with Gnome.

View 2 Replies View Related

Fedora Hardware :: Can't Detect Scanner Canon Canoscan 5600f?

Jan 2, 2011

fedora can't detect my scanner 5600f !!how can i do ? i can't scan pictures ? is there any solution ??

programming ?? driver ?? can i do somthing with sane genesys and GL841 chipset??

View 1 Replies View Related

Fedora :: Error - Found USB Scanner (vendor=0x04a9 [Canon], Product=0x2213 [CanoScan], Chip=GL841?) At Libusb:001:006

Aug 1, 2009

Since installing F11, my Canon LIDE 50 scanner refuses to work. xsane 0.996 produces an error message: Failed to start scanner: Error during device I/O.

sane-find-scanner says it is there: found USB scanner (vendor=0x04a9 [Canon], product=0x2213 [CanoScan], chip=GL841?) at libusb:001:006 But scanimage -L claims: No scanners were identified.except once when it admitted: device `genesys:libusb:001:006' is a Canon LiDE 35/40/50 flatbed scanner

I reluctantly tested the scanner on a Windoze machine and it works perfectly. And it worked perfectly under F10.

View 9 Replies View Related

OpenSUSE Hardware :: Paused - "/usr/lib/cups/backend/socket Failed"

Jun 15, 2011

My problem is fixed, but I have a general question regarding wireless printing with cups. When this error occurs: Paused - "/usr/lib/cups/backend/socket failed"

This has to do with my printer (an HP 6940) changing the URL that is uses. What causes the URL to change in the printer?

View 5 Replies View Related

OpenSUSE Hardware :: Free Mesa Driver Is Alot Faster Than The ATI Propietary Driver?

Dec 17, 2009

Is it normal that the free Mesa driver is alot faster than the ATI propietary driver?, at least for desktop usage. That is, using both latest drivers, 9.11 and 7.7

View 3 Replies View Related

OpenSUSE Hardware :: How To Clear Proprietary NVidia Driver And Replace With Nouveau Driver

Jun 13, 2011

There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.

Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.

View 9 Replies View Related

OpenSUSE Wireless :: RTL8191SE Driver On Compaq Presario CQ62 Doesn't Work With XP Driver

Oct 23, 2010

No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.

However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.

I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.

View 6 Replies View Related

OpenSUSE Hardware :: Using The Nouveu Driver Or The Nvidia Binary Driver?

Mar 12, 2011

How do I check if I'm using the Nouveu driver or the Nvidia Binary driver? I thought things were running nicely with the free driver because I had compositing working on my dismal graphics card... But scrolling in firefox is slow/laggy so I tried installing the binary driver with 1click install. But I restarted and still have the same problem. I think I might still be using the nouveu driver? Actually, scratch that last sentence. I just did lspci -v and got this output:

Code:
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 310e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]

[Code]...

View 2 Replies View Related

General :: Do Intel HD 3000 Graphics Run Out Of The Box

Jul 29, 2011

Do Intel HD 3000 Graphics run out of the box on Linux? Or do I have to do some manual work to get it working? Does Intel develop open source drivers?

Are they faster than on Windows?

This would apply for any Linux distribution.

View 1 Replies View Related

SUSE :: Unable To Use MS VX-3000 Webcam With 11.2

Jun 2, 2010

I have installed the gspca2 driver for my webcam, but in kopete, I still get only a wierd multi colored/scrambled thick line across the top of the webcam screen and the rest remains blank. This is in Kopete.In Kopete, under video, under device, under input, it shows "sonixj" and the device is "USB camera". I know the webcam works in Win7/Vista/XP, but I am trying to get away from using those OSs.

I had tried the 1 click SuSE install of the gspca2 driver but it wouldn't complete the install. Doing it in YaST directly seemed to work but I still get the same bad screen when using the webcam, which has it's LED light up.

View 1 Replies View Related

Ubuntu :: What Is Jockey Backend

Dec 17, 2010

Hwhen I try to update my cache in Wubi 10.1,it starts giving me a message that "waiting for jockey-backend to exit" and nothing continues,I dont know what is it all about and how to solve it?

View 2 Replies View Related

Ubuntu Multimedia :: No Sound On HDMI ATI 3000?

May 22, 2010

Video is ok, but never any sound. I went through and made sure the HDMI is selected as the audio device and I upgraded to the latest driver binary.

HDMI sound works without the ATI proprietary driver installed, but the needed resolution is not available and the picture overlaps the edges on my 32" LCD. At least I know it is not a hardware issue. ALSA is loaded and selected as the sound manager, but the volume controls don't appear in the ALSA slider console.

I tested the cable and display on another computer. I am using a new Gigabyte GA-MA78LM-SH2, it is the integrated video.

View 3 Replies View Related

Ubuntu Servers :: Installing 10.04 On Proliant 3000?

Jun 26, 2010

I got my hands on my first real server hardware yesterday - a PIII 600 MHz COMPAQ Proliant 3000 with 1.8 GB RAM, Smart Array 3200 controller and 4x18.2GB SCSI ULTRA 3 hard drives. RAM is upgraded from original and USB card added - otherwise hardware arrangement appears to be original.

Minimal 10.04 installed (35 minutes boot to boot) as Server 10.04 could not detect CD drive. My problem? Everything works but it does not look right. Probably my bigger problem?? I know almost nothing about RAID and the more I read the more ethereal my understanding seems to become.

When installing, I chose to install with LVM on c0d0. Grub written to MBR. I have posted df -l, fdisk -l and lshw output below. Would someone tell me if this looks correct and, possibly, offer some pointers if it does not.

Code]...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved