Hwhen I try to update my cache in Wubi 10.1,it starts giving me a message that "waiting for jockey-backend to exit" and nothing continues,I dont know what is it all about and how to solve it?
View 2 RepliesWhen i update cache in ubuntu,it is always displaying "waiting for jockey-backend to exit" and then there isn't any reaction.what's jockey-backend? how can i update cache successfully?
View 2 Replies View RelatedI want to install GTK+. I see there are also numerous dependencies, which i've been slowly tackling, and the Cairo package has been particularly difficult. It claims the following upon ./configure --prefix=/usr configure: WARNING: Could not find libpng in the pkg-config search path checking whether cairo's PNG backend could be enabled... no configure: error: requested PNG backend could not be enabled I've done some searching and found that libpng.pc is in my /usr/lib/pkgconfig/ directory and that the following commands don't do the trick:
PKG_CONFIG_PATH=/usr/lib/pkgconfig
export PKG_CONFIG_PATH
i installed yumex:yum -y install yumex, when i start yumex it came with this error:fatal error:backend-not-running backend not running as expected (yumex will close) how can i solve it?
View 10 Replies View RelatedI want the drivers that are downloaded with jockey, but without having to use jockey-gtk (as it requires GNOME, and not just GTK.) How do I go about downloading/installing said drivers for a restricted NVIDIA (GTX 470) video card for 3D Composition? (I noticed there's a package called jockey-common, but so far, all I've hit on google are bug reports related to jockey-gtk, and nothing on how to use the jockey-backend, alone.) I can't start installing my openbox only (no-DE) install of ubuntu mini.iso without knowing how. The official drivers usually cause the entire system to start lagging for some reason on any brand of video card, ATI, NVIDIA and even Intel if I use the official BINs for each.
View 9 Replies View RelatedI installed the ppc version of ubuntu 10.10 on my moms iMac g5 and cannot open additional drivers aka jockey-gtk. I simply see the "searching for additional drivers" window appear for just a sec, than nothing else.
in terminal I get a list of stuff i'm assuming are errors. So far none of the other solutions on the forum have worked that have solved it for other people.
here is what it gives me when I try to run in terminal:
Code:
leslie@leslie-desktop:~$ jockey-gtk
Exception in thread thread_call_progress_dialog:
Traceback (most recent call last):
File "/usr/lib/python2.6/threading.py", line 532, in __bootstrap_inner
[Code]....
I've installed Ubuntu Minimal 9.10 (64-bit) on a Gateway ML6720 laptop. I run Jockey-GTK in terminator and after searching, it brings back no results and says "No proprietary drivers are in use on this system." I don't really have a clue of what I could be missing, but I got my drivers working in Arch on this laptop before so it can't be anything too difficult[URL]
View 4 Replies View RelatedI've just installed the Netbook Edition of Lucid on my MacBook, and it works great, with two issues:
First, each time I start, the computer is extraordinarily laggy (pretty much unusable), until I run System Testing for video, and go through the whole process. Then it seems to work great. Also, I'm having a 100% CPU issue, which switches between my two CPUs. There was nothing under "my processes" that showed any kind of heavy use. But, under "all processes" was something called Backend. I killed the process and now everything seems to be working just fine.
Here is my learning curve or what I would like to try. 1. Install Ubuntu on computer with following hardware:ASUS M3A7-EM AM2+ CPU, looking for a 45w one 780G/SB700, if the onboard video gives me grief I will install a nVidia 2gb DDR2 RAM 320gb or 500gb system drive, nothing smaller in the cupboard.
2. I want to install Mybuntu backend on this computer as part of a media sharing system. I have several PVR cards and it will be trial and error to see what works. I have a 1.5tb drive for media storage.
3.I have several old laptops to experiment with as frontends, I also want to install Mythbuntu and Kubuntu on one these to compare KDE and Gnome. At least two of the laptops have wireless so it will be easy to network.
[Code]...
I have a problem with cpu, when i'm not running any application ,cpu is 100%, this picture. i use acer 4741 ram 2Gb ddr3, core i3 2.13Gh.
View 3 Replies View RelatedI had a dedicated HTPC box running Mythbuntu 11.04 (MythTV 0.24.1, I believe) that was both a master backend and frontend. I was also running a separate box (server 10.04) as a file server, print server, etc. Very recently I decided to try to migrate the backend duties and database from the HTPC box to the server so that I only need to have one machine running 24/7. So, on the server, I installed mythtv-backend-master from the repository, which for 10.04 is version 0.23.0+fixes. You might have seen this one coming... when I try to import the database from the Mythbuntu box into the server's MythTV installation, I get an error message saying the database schema (1264) is newer than expected (1254).
So, I'm wondering about my options at this point. Is it reasonable to install the same version of MythTV on the server? What would be the best way of going about that?
Is there a way to easily revert the database schema to the earlier version that's required?
Will I just need to start over with a new database? (Hopefully not this one.)
Other options I haven't thought of?
" p, li { white-space: pre-wrap; }Cannot get the exclusive lock on the packaging backend. Please close any other legacy packaging tools that may be open." I cannot update anything, and I haven't opened another package downloader. The only one open is KpackageKit. Please help, is this a big or have a I got a virus or something? I don't know what information is needed so if I need to expand tell me what I need to retrieve and ill post it.I'm not good with Kubuntu problems.
View 2 Replies View RelatedWhen I reboot my computer I cannot see my Tuner card until I manually restart the MythTV backend.
the problem is that the backend is being started before the drivers to the tuner card (HVR-2250). is there a way to change this.
I figure I should ask here as more people know there way around start up commands. I figure the easiest thing to do is to edit this file:
Code:
/etc/init/mythtv-backend.conf
I would think adding a sleep or wait command would do the trick?
why upstart is broken in 10.04? The old init of /etc/init.d/mythtv-backend start worked fine in 9.10.
$ start mythtv-backend
start: Rejected send message, 1 matched rules; type="method_call", sender=":1.93" (uid=1000 pid=21758 comm="start) interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init"))
I am new to Debian Wheezy and I can't install anything. Ever time I try to install a .deb file I get the message saying that installation is not supported by backend. Also I'm unable to install from the terminal; it always says something like "path not found" or "file doesn't exist" (I'm on my phone so I don't have an exact error detail). Everything I've read tells me to install something to fix the problem but I can't install them due to the same error.
View 14 Replies View RelatedI want to use xine as the backend for totem and I am advised to run totem-backend:
[root@june tim]# totem-backend -b xine
Command not found.
[root@june tim]#
how to install totem-backend
i want to integrate backend (C code) with GUI (its based on java and php), im working on linux cent os.
View 6 Replies View RelatedI'm trying to setup Mythbuntu on a computer connected to a TV. I have bought an USB DVB-T Receiver, named WandTV. According to LinuxTV; WandTV, aka Shenzhen Forward Video EzTV859, is supported in the Linux kernel.
When I try to setup the mythTV backend I'm being asked of what card type I have. I guess the answer to that is "DVB DTV capture card (v3.x)", but no matter what I choose, it can't find any devices.
I'm pretty sure /dev/hidraw0 is the receiver, can I use that to setup the backend?
In Karmic's Amarok 2.2, when you pause and then play, the sound usually stutters a few times before it starts playing smoothly. I originally thought this was a pulseaudio issue, as stuttering problems have been reported with pulse, but that wouldn't explain why sound is fine in mplayer, audacious, vlc, dragon player, and virtualbox. Only amarok has this problem. I found the cause of the problem: phonon-backend-xine. These steps will get rid of the stuttering problem:
1. Install phonon-backend-mplayer. You can get it from Rog131's PPA: [URL]
2. In Multimedia and Sound Configuration, which you can reach through amarok's Playback settings, on the Backend tab, click the arrows to move mplayer up above xine.
3. Quit and restart amarok.
There are some tradeoffs for good sound. Amarok seems to have some bugs when the sound backend is not xine, and bookmarks and OSD are broken when this backend is playing the sound. When you quit Amarok, it can't bookmark your place so it doesn't restart from where you last were, and after the track changes once, the OSD when you hover over the tray icon only says "Amarok - No track playing." You have to open Amarok to find that info. Are there any settings I can access for phonon-backend-xine that could fix the stuttering issue? The problems with the mplayer backend are minor compared with xine's bad sound, but I would like nice sound, OSD, and bookmarking.
I have a system that has an intermittent issue with copying files. Below is the error that occurs. Error while copying "<filename>"
There was an error coping the file into network:///
Operation not support by backend
The user has Ubuntu 8.04. They are using the Nautilus window to copy files (drag and drop) from a CD/DVD or USB device. The directory they are copying onto is a RAID0 device with approximately 2T of space, and more than enough space to take the files. The permissions for the drive and folders are set to the user.
This occurs randomly and is very frustrating. We cannot duplicate it and when it does occur, it will happen once, then work fine. I've been checking forums and help files all over, but find nothing similar. The only stuff I find is if it's a new install and the permissions haven't been set correctly. Even a confirmation that someone else has seen this before.
I am trying to install gnome-mplayer to see if I update it, for he not catching more when I play the videos, and it is asking me to have at least one "backend "to compile Pango. I do not understand this output. Have you tried installing the source Cairo.ttf but solves nothing. Cairo is installed as described but do not understand this output.
weiller@debian:~/Downloads/pango-1.36.5$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
[code]...
Recently I started getting pop-up saying:
Code:
Failed to initialize
Failed to initialize packaging backend
This may occur if other packaging tools are being used simultaneously.
under more details i get:
Code:
There are unfinished transactions remaining. Please run yum-complete-transaction as root. I get to terminal, and as a root I try yum-complete-transaction, but it just says there are no unfinished transactions left. I tried to update thru yum, but this is what I get:
Code:
# yum update
Loaded plugins: fastestmirror, presto, refresh-packagekit
Determining fastest mirrors .....
After lots of googling, I tried:
"yum clean all",
"yum-comlete-transaction",
"rm -f /var/lib/rpm/__db*" + "rpm -vv --rebuilddb" + "yum clean all",
Everything else is working well, and I am able to update with "--skip-broken", but I keep getting this pop-ups. I use fedora 12.
Since Livna went down, I've been having having problems with KPackagekit. I disabled the Libna repo by setting enabled=0 in /etc/yum.repos.d/livna.repo, and have been able to update with Yum.KPackageKit fails on me now with the message "Failed to initialize backend. This may occur if other packaging tools are used simultaneously."Then it fails to finish, which causes me to reboot before I can use Yum successfully.Under Settings, I see no indication that it knows where the repositories are, and no way to add repos.
View 1 Replies View Relatedin KDE:Factory:Desktop you can find a new version of kupdateapplet. In the changes you can find the following:
- dropped zypp plugin (bnc: 590192)
- V 0.9.11
I have no access to 590192 in bugzilla, so can anybody tell me why the only real working backend is dropped? The PackageKit-Backend is not showing the updates from 3rd-party-repositories (packman or obs). Is there any possibility to get back the working 0.9.10?
I am marking this solved because I believe it is posted in the wrong forum. I will repost in Software. Sorry for the mistake. I have a small website that I want to host from home. I'm able to access it through the public IP but have not been successful in setting up the zones in PowerDns using PowerAdmin to resolve the domain name. I have read several sites regarding the issue but I still have no success. I'm hoping someone may be able to help with editing my master zone in order to resolve the domain name. I am using CentOS 5.5 to host the site and I've installed mysql as the backend to PowerDNS.
View 3 Replies View Relatedsetting up a basic apache webpage that would allow users to view files and folders on a server and transfer it from one directory to another? I know it doesn't sound very secure but this is an internal server so security is not a big issue as it is pretty secured in its network already. We have users that need to move files from one directory to another and we'd like to give them some intuitive interface to do this rather than having them log in to the linux system and run mv/cp commands. They are not very linux saavy.
PS: The system is running CENTOS 5.4.
I have error in KPackageKit when i try to install anything or check for updates:
Failed to initialize packaging backend. This may occur if other packaging tools are being used simultaneously.
Details: There are unfinished transactions remaining. Please run yum-complete-transaction as root.
I don't know anything about other packaging tools - I think I don't using any. Yum works fine in terminal. Reinstall PackageKit and KPackageKit files doesn't helped me. I also try to rebuilt rpm db:
rm -f /var/lib/rpm/__db*
rpm -vv --rebuilddb
yum clean all
I'm using Fedora 12 x86_64.
Have very recently installed Open S on my PC. As it's all really new 2 me have been strugling a bit to get things to work @ first. Now it's much better but my bleeping scanner won't work for love or money, apparently the Linux driver ( or should I say backend) for the thing has not been created. Its CanoScan 3000 and I still have the discs with Windows setup. Is there any way to get that thing work under Linux or should I get another scanner? Obviously, me writing the backend, is not really a very realistic option.
View 1 Replies View RelatedI recently bought scanner, the driver to which is currently in process and is not yet committed into the main repo, so I downloaded the new code and compiled it into /usr/local/ and openSUSE's YaST scanner configurer doesn't see the new versions and continues to work with the old ones.
View 9 Replies View RelatedWhen an SD card is inserted before/at boot time, everything works fine, meaning recognized by kernel and mounted to userspace.When an SD card is inserted after boot time, the kernel doesn't 'see' the hardware change not triggered, so no block device /dev/mmcblk0{p1}, so nothing to mount.This behavior is not openSuSE specific, when booting SystemRescueCD-2.0.1, the same behavior is noticed.SD card inserted after booting:
Code:
linux-j60s:~ # hal-device | grep mmc
linux-j60s:~ #
[code]...