OpenSUSE Hardware :: SD Card Not Triggering PCI Backend After Boot?

Apr 21, 2011

When an SD card is inserted before/at boot time, everything works fine, meaning recognized by kernel and mounted to userspace.When an SD card is inserted after boot time, the kernel doesn't 'see' the hardware change not triggered, so no block device /dev/mmcblk0{p1}, so nothing to mount.This behavior is not openSuSE specific, when booting SystemRescueCD-2.0.1, the same behavior is noticed.SD card inserted after booting:

linux-j60s:~ # hal-device | grep mmc
linux-j60s:~ #


View 5 Replies


Red Hat / Fedora :: PNG Backend Error While Installing Cairo-1.6.0 - Requested PNG Backend Could Not Be Enabled

Nov 29, 2010

I want to install GTK+. I see there are also numerous dependencies, which i've been slowly tackling, and the Cairo package has been particularly difficult. It claims the following upon ./configure --prefix=/usr configure: WARNING: Could not find libpng in the pkg-config search path checking whether cairo's PNG backend could be enabled... no configure: error: requested PNG backend could not be enabled I've done some searching and found that libpng.pc is in my /usr/lib/pkgconfig/ directory and that the following commands don't do the trick:


View 1 Replies View Related

Ubuntu Multimedia :: MythTV Backend Can't Find Capture Card?

Feb 7, 2010

I'm trying to setup Mythbuntu on a computer connected to a TV. I have bought an USB DVB-T Receiver, named WandTV. According to LinuxTV; WandTV, aka Shenzhen Forward Video EzTV859, is supported in the Linux kernel.

When I try to setup the mythTV backend I'm being asked of what card type I have. I guess the answer to that is "DVB DTV capture card (v3.x)", but no matter what I choose, it can't find any devices.

I'm pretty sure /dev/hidraw0 is the receiver, can I use that to setup the backend?

View 3 Replies View Related

General :: Error:backend-not-running Backend Not Running As Expected (yumex Will Close)

Mar 9, 2010

i installed yumex:yum -y install yumex, when i start yumex it came with this error:fatal error:backend-not-running backend not running as expected (yumex will close) how can i solve it?

View 10 Replies View Related

Ubuntu :: Delay MythTV Backend During Boot Process?

Apr 24, 2010

When I reboot my computer I cannot see my Tuner card until I manually restart the MythTV backend.

the problem is that the backend is being started before the drivers to the tuner card (HVR-2250). is there a way to change this.

I figure I should ask here as more people know there way around start up commands. I figure the easiest thing to do is to edit this file:


I would think adding a sleep or wait command would do the trick?

View 5 Replies View Related

OpenSUSE :: Why Is Zypp-backend Dropped In Kupdateapplet 0.9.11

Mar 24, 2010

in KDE:Factory:Desktop you can find a new version of kupdateapplet. In the changes you can find the following:

- dropped zypp plugin (bnc: 590192)
- V 0.9.11

I have no access to 590192 in bugzilla, so can anybody tell me why the only real working backend is dropped? The PackageKit-Backend is not showing the updates from 3rd-party-repositories (packman or obs). Is there any possibility to get back the working 0.9.10?

View 5 Replies View Related

OpenSUSE Hardware :: Driver/ Backend For CanoScan 3000?

Mar 3, 2010

Have very recently installed Open S on my PC. As it's all really new 2 me have been strugling a bit to get things to work @ first. Now it's much better but my bleeping scanner won't work for love or money, apparently the Linux driver ( or should I say backend) for the thing has not been created. Its CanoScan 3000 and I still have the discs with Windows setup. Is there any way to get that thing work under Linux or should I get another scanner? Obviously, me writing the backend, is not really a very realistic option.

View 1 Replies View Related

OpenSUSE Hardware :: Recompile SANE Backend To The Same Directories?

Mar 10, 2011

I recently bought scanner, the driver to which is currently in process and is not yet committed into the main repo, so I downloaded the new code and compiled it into /usr/local/ and openSUSE's YaST scanner configurer doesn't see the new versions and continues to work with the old ones.

View 9 Replies View Related

OpenSUSE Multimedia :: Configure Phonon's Xine Backend?

Jun 24, 2010

I have installed smplayer, and configured it to use the code...

Kaffeine (and dolphin's video preview) seem to use phonon's xine backend, and I can't find out what video output it uses. I'm guessing its plain old xv as it seems accelerated but turnes into a blue square when I move the window.

How do I tell the xine backend to use the same vo as smplayer?

OS 11.2 64 bit, KDE 4.4.4 (Factory)

(ps: I have a 'legacy' ATI graphics chip, xpress 200M working with the opensource radeon driver, which is brilliant btw).

View 2 Replies View Related

OpenSUSE Multimedia :: KDE 4 Phonon Xine-backend Configuration

Sep 6, 2010

So I have made an interesting Discovery with regards to using KDE4 Kaffeine version 1 and Dolby Digital 5.1. The basic problem seems that there is no way to configure the Phonon xine Backend in KDE 4 for use with Kaffeine version 1. There is however, a xine-config file located at:


There appears to be no GUI way to change the default xine configuration (for use with KDE 4 applications) and while you can do so manually, the options seem bewildering, at least to me.

When you run xine-ui or Kaffeine/KDE3 there is an option to adjust the xine audio configuration using a GUI. Any changes made here are ignored by KDE 4 applications. As luck would have it you can copy the old xine configuration (adjusted by Kaffeine/KDE3) over the new one for Kaffeine in KDE4. The old text file configuration is located at:


If you were to use the old Kaffeine/KDE3 to adjust your xine audio configuration and then copy this file to the Kaffeine Version 1 KDE4 location, those changes should be used by the new version 1 Kaffeine in KDE 4. After Kaffeine/KDE3 audio settings work as you desire, open up a terminal session and make the following file copy. You must overwrite or rename the old configuration file for backup.

cp ~/.xine/config ~/.kde4/share/apps/kaffeine/xine-config

Since this new xine configuration is in the new Kaffeine version 1 KDE4 location, it may only modify how the new Kaffeine works and nothing else running in KDE4, but it is still an interesting find.

View 1 Replies View Related

OpenSUSE :: Error - Nepomuk Was Not Able To Find The Configured Database Backend 'redland'

Aug 1, 2010

Installed 11.3 as new install on Thinkpad T42. I now have a persistent notification "Nepomuk was not able to find the configured database backend 'redland' ... what it means. System seems to be working but desktop icons have grey vertical rectangular box when selected. No objects to select in the boxes though. Previous version had tools available as I recall.

View 8 Replies View Related

OpenSUSE Multimedia :: Pausing Amarok With Phonon-backend-vlc Kills Sound?

Mar 29, 2011

Play a song in Amarok and then press the space bar to pause. Press the space bar again to resume and Amarok starts playing again with the status bar moving and the timer counting down, but no sound. If I move to the next song, sound starts working again. Or if I double click on a different song, sound works. If I use the xine backend, the problem goes away. I'm using Amarok-2.4 and KDE 4.6.1.

View 6 Replies View Related

OpenSUSE Multimedia :: Choppy Sound In Gnome - Installing Xine Backend ?

Jul 23, 2011

In Gnome and XFCE I always have a choppy music playback. The music is never played smoothly. There is always hesitations in the playback, as if the CPU is running on 100% and cannot cope with the system load.

One of the reasons for that is (in my case) Pulseaudio.

Another reason is Gstreamer. When I choose Gstreamer as backend in KDE, I get the same choppy musicplayback as in Gnome or XFCE. With Xine as backend in KDE, everything is fine. So my conclusion is: with Xine, the sound would be fine in Gnome too.

So, I wonder if it is possible to use Xine as backend in Gnome too. Does anyone have experience with running Xine in Gnome and/or XFCE? What do I need to do to set Gnome/XFCE, so that it uses Xine instead of Gstreamer?

Or is there maybe a special setting, I have to apply? In gstreamer-properties I have tried all possible settings, but this didnīt change anything to the quality of sound.

My experience is also: this choppy sound is hardware-independend. It doesnīt matter which hardware I use, the sound is choppy. It is also distro-independend. The sound is choppy in openSUSE (gnome and in KDE with applied Gstreamer backend), in Ubuntu, Xubuntu, Fedora with Gnome, Linux Mint with Gnome.

View 2 Replies View Related

General :: IPod Touch Triggering Digikam

Mar 11, 2010

Wasn't sure were to put this go here goes.When I plug in my Canon Powershot Digikam starts up, which is great. But... when I plug in my iPod Touch to recharge Digikam also starts up, how can I put a stop to the latter?

View 2 Replies View Related

Ubuntu :: Gnome-schedule Not Triggering - How To Make It Trigger

Aug 1, 2010

Scheduled Tasks is giving me a hard time. I have a command set for 23:00 daily as "gthumb -f ~/Pictures/ScheduledPic.jpg", but when the time rolls around, nothing happens. The strange thing is, it does work when I press "Run scheduled task." I get the same results if I select a different time or change it to "google-chrome ~/Pictures/ScheduledPic.jpg". My other scheduled task, a Perl script, works fine.

View 2 Replies View Related

Server :: Hugepages Experiment - Triggering Large Page Tables

Feb 28, 2011

I am learning about linux memory and hugepages, and know that hugepages basically is just memory that manages memory. I thought I'd experiment with the subject, and wrote a very small C program [URL] that basically just eats 20 GB of memory. The idea was that I would use this small C program to see how big the page table would get when handling large areas of memory when I'm not using hugepages. After running the program on my RHEL 5 server I was expecting the PageTable to be huge, but found that it was only about 43 MB. The page size on my RHEL box i 4 kB. Why I'm not getting the major PageTable size issue I was expecting?

View 2 Replies View Related

Software :: Syslog Alerts Not Triggering To Server (Redhat Enterprise 5)?

Nov 13, 2010

just set up a windows server and other windows boxes send alerts to it no problem.Yesterday I configured my linux box (RHEL 5) using /etc/sysconfig/syslog and /etc/syslog.conf so that all alerts would go to the syslog server.There are no external firewalls involved and while the firewall is working on my linux boxI have made sure port 514 TCP/UDP are let through.Ive checked syslogd and klogd are running.I've also applied the '*@' line in etc/syslog.conf. Basically Id like everything to go to the syslog server.Now if I telnet to the syslog server on port 514 I can type text on the linux box and it comes through on the syslog server. Great - but no syslog alerts seem to come through normally, even when I reboot the box.I've tried *., .*, and * to no avail, ive got an entry in my hosts file for the server and tried using a name instead of an ip address, no luck.

View 1 Replies View Related

OpenSUSE Wireless :: Setting Up 3g Card On Each Boot?

Jun 12, 2011

I have a local 3G data card which i need to set up on each boot using terminal. I have searched a HELL LOT and found a way to do it. The following are the commands to be run :

sudo /sbin/depmod
sudo /sbin/modprobe usbserial vendor=0x1c9e product=0x9e00


View 4 Replies View Related

Slackware :: Triggering Udev Events: /sbin/udevadm Trigger --type=failed

Mar 14, 2010

Noticed this on boot up the other day, but it doesn't seem to have a negative effect. Everything appears to be running just fine.

"Triggering udev events: /sbin/udevadm trigger --type=failed"

Is this something that needs to be resolved or ignored?

View 7 Replies View Related

OpenSUSE Hardware :: Paused - "/usr/lib/cups/backend/socket Failed"

Jun 15, 2011

My problem is fixed, but I have a general question regarding wireless printing with cups. When this error occurs: Paused - "/usr/lib/cups/backend/socket failed"

This has to do with my printer (an HP 6940) changing the URL that is uses. What causes the URL to change in the printer?

View 5 Replies View Related

OpenSUSE Install :: Acpi Better / Card Went To Legacy What Version Still Has Ati Drivers For Card

Dec 6, 2009

i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?

q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.

i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.

View 9 Replies View Related

Ubuntu :: What Is Jockey Backend

Dec 17, 2010

Hwhen I try to update my cache in Wubi 10.1,it starts giving me a message that "waiting for jockey-backend to exit" and nothing continues,I dont know what is it all about and how to solve it?

View 2 Replies View Related

Debian :: Install Not Supported By Backend

Aug 14, 2015

I am new to Debian Wheezy and I can't install anything. Ever time I try to install a .deb file I get the message saying that installation is not supported by backend. Also I'm unable to install from the terminal; it always says something like "path not found" or "file doesn't exist" (I'm on my phone so I don't have an exact error detail). Everything I've read tells me to install something to fix the problem but I can't install them due to the same error.

View 14 Replies View Related

Ubuntu :: 100 Percent CPU (What Is Backend Under All Processes)

Apr 30, 2010

I've just installed the Netbook Edition of Lucid on my MacBook, and it works great, with two issues:
First, each time I start, the computer is extraordinarily laggy (pretty much unusable), until I run System Testing for video, and go through the whole process. Then it seems to work great. Also, I'm having a 100% CPU issue, which switches between my two CPUs. There was nothing under "my processes" that showed any kind of heavy use. But, under "all processes" was something called Backend. I killed the process and now everything seems to be working just fine.

View 7 Replies View Related

Fedora :: Use Xine As The Backend For Totem

Jun 22, 2010

I want to use xine as the backend for totem and I am advised to run totem-backend:

[root@june tim]# totem-backend -b xine
Command not found.
[root@june tim]#

how to install totem-backend

View 1 Replies View Related

General :: Integrating Backend Code With GUI?

Feb 4, 2011

i want to integrate backend (C code) with GUI (its based on java and php), im working on linux cent os.

View 6 Replies View Related

Debian Installation :: Must Have At Least One Backend To Build Pango

Aug 13, 2014

I am trying to install gnome-mplayer to see if I update it, for he not catching more when I play the videos, and it is asking me to have at least one "backend "to compile Pango. I do not understand this output. Have you tried installing the source Cairo.ttf but solves nothing. Cairo is installed as described but do not understand this output.

weiller@debian:~/Downloads/pango-1.36.5$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk


View 0 Replies View Related

Fedora :: Failed To Initialize Packaging Backend

Mar 16, 2010

Recently I started getting pop-up saying:

Failed to initialize
Failed to initialize packaging backend
This may occur if other packaging tools are being used simultaneously.
under more details i get:

There are unfinished transactions remaining. Please run yum-complete-transaction as root. I get to terminal, and as a root I try yum-complete-transaction, but it just says there are no unfinished transactions left. I tried to update thru yum, but this is what I get:

# yum update
Loaded plugins: fastestmirror, presto, refresh-packagekit
Determining fastest mirrors .....

After lots of googling, I tried:
"yum clean all",
"rm -f /var/lib/rpm/__db*" + "rpm -vv --rebuilddb" + "yum clean all",

Everything else is working well, and I am able to update with "--skip-broken", but I keep getting this pop-ups. I use fedora 12.

View 5 Replies View Related

Fedora :: KPackageKit - Failed To Initialize Backend?

Jun 16, 2010

Since Livna went down, I've been having having problems with KPackagekit. I disabled the Libna repo by setting enabled=0 in /etc/yum.repos.d/livna.repo, and have been able to update with Yum.KPackageKit fails on me now with the message "Failed to initialize backend. This may occur if other packaging tools are used simultaneously."Then it fails to finish, which causes me to reboot before I can use Yum successfully.Under Settings, I see no indication that it knows where the repositories are, and no way to add repos.

View 1 Replies View Related

Ubuntu :: Partitioning The System Drive For The Backend?

Apr 27, 2010

Here is my learning curve or what I would like to try. 1. Install Ubuntu on computer with following hardware:ASUS M3A7-EM AM2+ CPU, looking for a 45w one 780G/SB700, if the onboard video gives me grief I will install a nVidia 2gb DDR2 RAM 320gb or 500gb system drive, nothing smaller in the cupboard.

2. I want to install Mybuntu backend on this computer as part of a media sharing system. I have several PVR cards and it will be trial and error to see what works. I have a 1.5tb drive for media storage.

3.I have several old laptops to experiment with as frontends, I also want to install Mythbuntu and Kubuntu on one these to compare KDE and Gnome. At least two of the laptops have wireless so it will be easy to network.


View 1 Replies View Related

Copyrights 2005-15, All rights reserved