OpenSUSE :: Why Is Zypp-backend Dropped In Kupdateapplet 0.9.11

Mar 24, 2010

in KDE:Factory:Desktop you can find a new version of kupdateapplet. In the changes you can find the following:

- dropped zypp plugin (bnc: 590192)
- V 0.9.11

I have no access to 590192 in bugzilla, so can anybody tell me why the only real working backend is dropped? The PackageKit-Backend is not showing the updates from 3rd-party-repositories (packman or obs). Is there any possibility to get back the working 0.9.10?

View 5 Replies


OpenSUSE :: Get Zypp To Apply Deltarpms After Downloading All Of Them?

Feb 2, 2011

By default, when zypp does an update, it downloads a deltarpm and applies it immediately, during which time the internet connection is open and unused. Can I make zypp apply the deltarpms all at the end, only after it has downloaded all of them? I'm used to this sort of behavior on Fedora/yum, and it reduces the window for which I must keep my internet connection open.

View 4 Replies View Related

OpenSUSE :: Disable Downloading From Multiple Servers In ZYpp?

Mar 14, 2011

Whenever I do anything in Zypper, there is always a huge lag before it starts downloading a file, but then it downloads at normal speed. I think this has to do with the fact that it is now trying to download from multiple servers, and I would like to turn that off. Where do I go for that?

View 2 Replies View Related

Red Hat / Fedora :: PNG Backend Error While Installing Cairo-1.6.0 - Requested PNG Backend Could Not Be Enabled

Nov 29, 2010

I want to install GTK+. I see there are also numerous dependencies, which i've been slowly tackling, and the Cairo package has been particularly difficult. It claims the following upon ./configure --prefix=/usr configure: WARNING: Could not find libpng in the pkg-config search path checking whether cairo's PNG backend could be enabled... no configure: error: requested PNG backend could not be enabled I've done some searching and found that libpng.pc is in my /usr/lib/pkgconfig/ directory and that the following commands don't do the trick:


View 1 Replies View Related

General :: Error:backend-not-running Backend Not Running As Expected (yumex Will Close)

Mar 9, 2010

i installed yumex:yum -y install yumex, when i start yumex it came with this error:fatal error:backend-not-running backend not running as expected (yumex will close) how can i solve it?

View 10 Replies View Related

OpenSUSE Hardware :: Driver/ Backend For CanoScan 3000?

Mar 3, 2010

Have very recently installed Open S on my PC. As it's all really new 2 me have been strugling a bit to get things to work @ first. Now it's much better but my bleeping scanner won't work for love or money, apparently the Linux driver ( or should I say backend) for the thing has not been created. Its CanoScan 3000 and I still have the discs with Windows setup. Is there any way to get that thing work under Linux or should I get another scanner? Obviously, me writing the backend, is not really a very realistic option.

View 1 Replies View Related

OpenSUSE Hardware :: Recompile SANE Backend To The Same Directories?

Mar 10, 2011

I recently bought scanner, the driver to which is currently in process and is not yet committed into the main repo, so I downloaded the new code and compiled it into /usr/local/ and openSUSE's YaST scanner configurer doesn't see the new versions and continues to work with the old ones.

View 9 Replies View Related

OpenSUSE Hardware :: SD Card Not Triggering PCI Backend After Boot?

Apr 21, 2011

When an SD card is inserted before/at boot time, everything works fine, meaning recognized by kernel and mounted to userspace.When an SD card is inserted after boot time, the kernel doesn't 'see' the hardware change not triggered, so no block device /dev/mmcblk0{p1}, so nothing to mount.This behavior is not openSuSE specific, when booting SystemRescueCD-2.0.1, the same behavior is noticed.SD card inserted after booting:

linux-j60s:~ # hal-device | grep mmc
linux-j60s:~ #


View 5 Replies View Related

OpenSUSE Multimedia :: Configure Phonon's Xine Backend?

Jun 24, 2010

I have installed smplayer, and configured it to use the code...

Kaffeine (and dolphin's video preview) seem to use phonon's xine backend, and I can't find out what video output it uses. I'm guessing its plain old xv as it seems accelerated but turnes into a blue square when I move the window.

How do I tell the xine backend to use the same vo as smplayer?

OS 11.2 64 bit, KDE 4.4.4 (Factory)

(ps: I have a 'legacy' ATI graphics chip, xpress 200M working with the opensource radeon driver, which is brilliant btw).

View 2 Replies View Related

OpenSUSE Multimedia :: KDE 4 Phonon Xine-backend Configuration

Sep 6, 2010

So I have made an interesting Discovery with regards to using KDE4 Kaffeine version 1 and Dolby Digital 5.1. The basic problem seems that there is no way to configure the Phonon xine Backend in KDE 4 for use with Kaffeine version 1. There is however, a xine-config file located at:


There appears to be no GUI way to change the default xine configuration (for use with KDE 4 applications) and while you can do so manually, the options seem bewildering, at least to me.

When you run xine-ui or Kaffeine/KDE3 there is an option to adjust the xine audio configuration using a GUI. Any changes made here are ignored by KDE 4 applications. As luck would have it you can copy the old xine configuration (adjusted by Kaffeine/KDE3) over the new one for Kaffeine in KDE4. The old text file configuration is located at:


If you were to use the old Kaffeine/KDE3 to adjust your xine audio configuration and then copy this file to the Kaffeine Version 1 KDE4 location, those changes should be used by the new version 1 Kaffeine in KDE 4. After Kaffeine/KDE3 audio settings work as you desire, open up a terminal session and make the following file copy. You must overwrite or rename the old configuration file for backup.

cp ~/.xine/config ~/.kde4/share/apps/kaffeine/xine-config

Since this new xine configuration is in the new Kaffeine version 1 KDE4 location, it may only modify how the new Kaffeine works and nothing else running in KDE4, but it is still an interesting find.

View 1 Replies View Related

OpenSUSE Network :: Ifconfig Eth0 RX Dropped Counters Since 11.4

Jun 1, 2011

I have been noticing a trend on boxes running 11.4 getting RX dropped packets where prior to 11.4 they did not get them. Basically every box running 11.4 now logs dropped RX packets. Have tried changing cables, and in one case replaced the NIC with a different brand (and driver) nic. Also played with receive buffers and yet the counters still increment. In addition to OpenSUSE, I run several operating systems to include Centos, Scientific Linux, Debian, OpenIndiana, HP-UX, VMS and so forth. So far this anomaly has only shown up on machines running OpenSUSE 11.4. Any one else noticing this on your OS 11.4 machines? If so, were you able to resolve?


View 7 Replies View Related

OpenSUSE :: Error - Nepomuk Was Not Able To Find The Configured Database Backend 'redland'

Aug 1, 2010

Installed 11.3 as new install on Thinkpad T42. I now have a persistent notification "Nepomuk was not able to find the configured database backend 'redland' ... what it means. System seems to be working but desktop icons have grey vertical rectangular box when selected. No objects to select in the boxes though. Previous version had tools available as I recall.

View 8 Replies View Related

OpenSUSE Multimedia :: Pausing Amarok With Phonon-backend-vlc Kills Sound?

Mar 29, 2011

Play a song in Amarok and then press the space bar to pause. Press the space bar again to resume and Amarok starts playing again with the status bar moving and the timer counting down, but no sound. If I move to the next song, sound starts working again. Or if I double click on a different song, sound works. If I use the xine backend, the problem goes away. I'm using Amarok-2.4 and KDE 4.6.1.

View 6 Replies View Related

OpenSUSE Multimedia :: Choppy Sound In Gnome - Installing Xine Backend ?

Jul 23, 2011

In Gnome and XFCE I always have a choppy music playback. The music is never played smoothly. There is always hesitations in the playback, as if the CPU is running on 100% and cannot cope with the system load.

One of the reasons for that is (in my case) Pulseaudio.

Another reason is Gstreamer. When I choose Gstreamer as backend in KDE, I get the same choppy musicplayback as in Gnome or XFCE. With Xine as backend in KDE, everything is fine. So my conclusion is: with Xine, the sound would be fine in Gnome too.

So, I wonder if it is possible to use Xine as backend in Gnome too. Does anyone have experience with running Xine in Gnome and/or XFCE? What do I need to do to set Gnome/XFCE, so that it uses Xine instead of Gstreamer?

Or is there maybe a special setting, I have to apply? In gstreamer-properties I have tried all possible settings, but this didnīt change anything to the quality of sound.

My experience is also: this choppy sound is hardware-independend. It doesnīt matter which hardware I use, the sound is choppy. It is also distro-independend. The sound is choppy in openSUSE (gnome and in KDE with applied Gstreamer backend), in Ubuntu, Xubuntu, Fedora with Gnome, Linux Mint with Gnome.

View 2 Replies View Related

OpenSUSE Hardware :: Paused - "/usr/lib/cups/backend/socket Failed"

Jun 15, 2011

My problem is fixed, but I have a general question regarding wireless printing with cups. When this error occurs: Paused - "/usr/lib/cups/backend/socket failed"

This has to do with my printer (an HP 6940) changing the URL that is uses. What causes the URL to change in the printer?

View 5 Replies View Related

Ubuntu :: What Is Jockey Backend

Dec 17, 2010

Hwhen I try to update my cache in Wubi 10.1,it starts giving me a message that "waiting for jockey-backend to exit" and nothing continues,I dont know what is it all about and how to solve it?

View 2 Replies View Related

Debian :: Install Not Supported By Backend

Aug 14, 2015

I am new to Debian Wheezy and I can't install anything. Ever time I try to install a .deb file I get the message saying that installation is not supported by backend. Also I'm unable to install from the terminal; it always says something like "path not found" or "file doesn't exist" (I'm on my phone so I don't have an exact error detail). Everything I've read tells me to install something to fix the problem but I can't install them due to the same error.

View 14 Replies View Related

Ubuntu :: 100 Percent CPU (What Is Backend Under All Processes)

Apr 30, 2010

I've just installed the Netbook Edition of Lucid on my MacBook, and it works great, with two issues:
First, each time I start, the computer is extraordinarily laggy (pretty much unusable), until I run System Testing for video, and go through the whole process. Then it seems to work great. Also, I'm having a 100% CPU issue, which switches between my two CPUs. There was nothing under "my processes" that showed any kind of heavy use. But, under "all processes" was something called Backend. I killed the process and now everything seems to be working just fine.

View 7 Replies View Related

Ubuntu :: First Keyboard Character Gets Dropped

May 27, 2010

Have Lucid installed on an Acer laptop. With an external keyboard plugged into a USB hub, then into the laptop, I have been losing the first character typed, sometimes. Most of the time it is OK, but it happens many times in an hour. If I am typing right along, no drops. Only the first character I enter is missing. Most of the time it is firefox I am typing into, but not always. My use of this machine is largely online, so probably that is coincidental.

This problem I have never seen before Lucid - I don't remember it in the beta ether, but I didn't run that too much.Versions 9.04 and before were OK (couldn't use 9.10 for other reasons).

View 3 Replies View Related

Ubuntu Networking :: Wireless Keeps Getting Dropped

Oct 1, 2010

My wireless connection keeps getting dropped very frequently. I am on a Dell XPS m1530 and I will just be on the interent and it just disconnects from wireless and I have to connect back. It is super annoying. I am on the latest version of ubuntu.

View 4 Replies View Related

Ubuntu Networking :: Keep Getting Dropped From Network

Oct 11, 2010

my laptop running 10.10 and a dell. the college is witch i attend's unsecured wireless network keep disconnecting me from every on average 45 minutes to an hour ands will not re connect for about 10-15 minutes. it works fine anywhere else i go but here i get dropped.

View 1 Replies View Related

Fedora :: Use Xine As The Backend For Totem

Jun 22, 2010

I want to use xine as the backend for totem and I am advised to run totem-backend:

[root@june tim]# totem-backend -b xine
Command not found.
[root@june tim]#

how to install totem-backend

View 1 Replies View Related

Networking :: Dropped Packets But Only For TCP Connections?

Oct 1, 2010

One of our RHEL 5.3 servers has trouble about 30% of the time with TCP-based communications, but it does not seem to be firewall issues. From another computer on the same switch, you can SSH to the server sometimes and other times the SSH command will just hang. When it hangs, you can often just Ctrl+C and try it again and it works. Same with HTTP connections. You'll get part of a web page and then FireFox will just hang waiting for the rest and eventually time out. Same goes for communication initiated FROM the server. SSH'ing from the server to any outside server or connecting to any web site works sometimes, but most times not. iptables if off. No other firewalls are running. Tcpdump shows communication gets so far and then stops. It does not matter whether tou run tcpdump on that server or the client connecting to it. Either way you see the connection stops working. MEANWHILE, pinging with small or large packets works flawlessly. 10,000 packets, zero drops.

View 5 Replies View Related

Networking :: Dropped Packets On Firewall

Jan 11, 2010

I've recently installed Ubunter 9.10 Server Edition to use as a NAT firewall for the lab I run. I'm using iptables to do NAT forwarding and everything works great except that, occasionally, connections seem to break. Ssh connections close with "Connection reset by peer" and HTTP connections just stall out.I believe this has to do with the firewall's internal network interface occasionally dropping packets.

View 2 Replies View Related

Networking :: Netstat - Dropped Packets Under IP

Feb 13, 2009

I have question regarding netstat? When performing a "netstat -s" I receive the following information regarding dropped packets under IP:

93978695 total packets received
0 forwarded
0 incoming packets discarded
79472157 incoming packets delivered
65235033 requests sent out
29527 outgoing packets dropped

However if I run a "netstat -i" I have no dropped packets whatsoever: (apologies for the table format):
Kernel Interface table
bond0 1500 0 34326528 0 0 0 72755307 0 0 0 BMmRU
bond0:1 1500 0 - no statistics available - BMmRU
bond1 1500 0 28605491 0 0 0 20948952 0 0 0 BMmRU
eth0 1500 0 34199550 0 0 0 72755278 0 0 0 BMsRU
eth1 1500 0 126978 0 0 0 29 0 0 0 BMsRU
eth2 1500 0 97911 0 0 0 1 0 0 0 BMsRU
eth3 1500 0 28507580 0 0 0 20948951 0 0 0 BMsRU
lo 16436 0 34094225 0 0 0 34094225 0 0 0 LRU

View 5 Replies View Related

General :: Integrating Backend Code With GUI?

Feb 4, 2011

i want to integrate backend (C code) with GUI (its based on java and php), im working on linux cent os.

View 6 Replies View Related

Security :: Anyway To NOT Log Dropped Ports 137 / 138 In Iptables?

Mar 30, 2011

We do NOT support samba on our Unbuntu servers but still zillions of windows machines are constantly trying to connect on the SMB ports. I've added a rule that drops access to destination ports 137-138 and that seems to work. But it creates many many log entries documenting that the packet has been dropped. I've been researching and cannot come up with a way to suppress logging for these drops.

View 4 Replies View Related

Slackware :: Options Dropped In Sendmail 8.14.4?

Apr 25, 2011

I recently tried to upgrade my Slackware server's sendmail software from 8.14.3 to 8.14.4 and ran into a problem. In a nutshell all outbound non local mail is routed through a smart host requiring authentication. As a result I use a modified version of the "" to build the However, when I tried to run sendmail 8.14.4 with my newly created I was greeted with the following.

Warning: Option: AuthMechanisms requires SASL support (-DSASL)
Warning: Option: AuthOptions requires SASL support (-DSASL)
Warning: Option: CACertPath requires TLS support
Warning: Option: CACertFile requires TLS support


Apparently SSLv2 is now considered weak and the directive is a good idea, but at present this directive is not supported by the sendmail in this package.

View 4 Replies View Related

Debian Installation :: Must Have At Least One Backend To Build Pango

Aug 13, 2014

I am trying to install gnome-mplayer to see if I update it, for he not catching more when I play the videos, and it is asking me to have at least one "backend "to compile Pango. I do not understand this output. Have you tried installing the source Cairo.ttf but solves nothing. Cairo is installed as described but do not understand this output.

weiller@debian:~/Downloads/pango-1.36.5$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk


View 0 Replies View Related

Debian :: Number Of Repos That Are Checked Has Dropped?

May 18, 2010

I'm new to Debian and I have just installed it on three machines. To begin with they checked about 60 or so repos when doing an update. Then quite quickly this dropped to 48. I have removed the DVD media from the sources list after installation but that was before I saw this drop. It happened after an update as far as I can tell. I didn't think anything of it at the time. By the time all three were set up they were all only checking 48 repos. However I also have a VM, for trying out new stuff, and whilst that has been updated it still remains at about 60 (currently 59).


View 6 Replies View Related

Copyrights 2005-15, All rights reserved