Fedora Hardware :: Can't Detect Scanner Canon Canoscan 5600f?

Jan 2, 2011

fedora can't detect my scanner 5600f !!how can i do ? i can't scan pictures ? is there any solution ??

programming ?? driver ?? can i do somthing with sane genesys and GL841 chipset??

View 1 Replies


Fedora :: Error - Found USB Scanner (vendor=0x04a9 [Canon], Product=0x2213 [CanoScan], Chip=GL841?) At Libusb:001:006

Aug 1, 2009

Since installing F11, my Canon LIDE 50 scanner refuses to work. xsane 0.996 produces an error message: Failed to start scanner: Error during device I/O.

sane-find-scanner says it is there: found USB scanner (vendor=0x04a9 [Canon], product=0x2213 [CanoScan], chip=GL841?) at libusb:001:006 But scanimage -L claims: No scanners were identified.except once when it admitted: device `genesys:libusb:001:006' is a Canon LiDE 35/40/50 flatbed scanner

I reluctantly tested the scanner on a Windoze machine and it works perfectly. And it worked perfectly under F10.

View 9 Replies View Related

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

Ubuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?

Dec 14, 2010

How to get this scanner to work with Ubuntu 10.10

It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.

I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.

Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...

View 3 Replies View Related

Hardware :: Getting Canon 8800F Scanner Working / No Other Scanner Found?

Sep 23, 2010

Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.

I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.

lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.

and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005

but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.

My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic

View 8 Replies View Related

Fedora :: How To Install Canon Scanner

Mar 16, 2010

I have a Canon Lide 100 flatbed scanner, however xsane 0.997 can't detect it.Just wanna ask you you guys add a scanner ?When I do a command line, this is what I get.Quote:[root@localhost]# sane-find-scannerfound USB scanner (vendor=0x04a9 [Canon], product=0x1904 [CanoScan], chip=GL843) at libusb:001:003However when I run the "Scanner Tool" from Application --> Graphics --> Scanner Tool

View 7 Replies View Related

Fedora :: Get A Canon MP210 Printer/scanner To Run?

Sep 21, 2009

I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.

View 5 Replies View Related

Fedora Hardware :: Canon Pixma Mp280 Scanner - No Program To Connect

Jan 3, 2011

I recently got the printer part working by downloading from canon the correct rpm also in doing this I got the scanner driver. My computer tells me it is installed but I see no program to connect with my scanner. There is nothing in xsane or simple scan to allow me access to the scanner.

View 5 Replies View Related

Ubuntu :: Enable Canon Printer/Scanner?

Aug 6, 2010

Is there a way to enable my Canon Printer/Scanner PIXMA MP 620B to work with Ubuntu?

View 2 Replies View Related

OpenSUSE Install :: 11.3: Can't Get Canon Pixma MG 5150 Scanner To Work

Jan 7, 2011

I'm trying to get my Canon Pixma MG 5150 scanner/printer to work. While the 'printer' is doing well the 'scanner' appears to be stubborn. I use the scangearpm-MG5100series-1.60-1 driver provided by Canon which is said to be fine with Suse 11.2.

The trouble is, that though the scanner scans it does not deliver anything back. Here are the details:

When I run scangearmp as root in a terminal I get the following output:

(scangearmp:6902): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.


View 9 Replies View Related

Ubuntu Installation :: Wireless Install Of Canon MX860 All-in-one Scanner?

Oct 19, 2010

I've done a ton of searching and all I've found seems geared to having your printer/scanner connected via USB cable in order to get the scanner working. I have the printer working wirelessly but thus far no go on the scanner. I've downloaded and installed the scangearmp packages.

I've tried installing the sane package via git according to this blog but when I try to run configure I see this: mustek_usb2 backend requires pthread library - disabling and usb isn't listed among the installed backends. I don't even know whether I need usb because this is wireless, but after compiling I run scanimage -L and nothing comes up. I'm still a Linux newb, and have learned a ton in the past couple of days, but this one is stumping me.

View 1 Replies View Related

General :: Need System Scanner For Canon PIXMA MP460 Printer

Apr 7, 2011

Are there any (easy to install) (X)SANE backends for Canon PIXMA MP460?

View 1 Replies View Related

Software :: Sane Parport Canon N640P Scanner / Getting The Dialog 'No Devices Available'?

Apr 20, 2010

1. Unless root chmod's /dev/parport0 to include o+rw, a user running xsane just gets the dialog 'No devices available'. Should the canon_pp driver be installed as su root, perhaps? CUPS uses the same port for printing without problems. Which library or executable needs to have permissions changed to change to run as root?

2. The N640P has a printer output port built in. As I have only one parallel port, I piggy-back my printer through the scanner. This does not work for xsane in Copy mode: nothing prints until I close xsane and then all I get printed is a stream of binary characters, not an image. I guess the canon_pp driver is holding the port open in such a way that CUPS sees the device as being busy. Any ideas on how to combat that? I am a C programmer and quite happy to help by hacking the code, if I have a start point. It irritates me to have to boot the print server into WinXP just so scanning and copying work without fuss.

View 8 Replies View Related

General :: Ubuntu Drivers For Canon MX330 Multi Function Printer Scanner?

Apr 27, 2010

I have downloaded successfully the drivers for the printer component of the MX330. The scanner drivers are downloaded,but I am unable to locate the working part of the .sh file so that I can open it. I have the .sh file in text, but do not know how to utilize it

View 1 Replies View Related

Ubuntu :: Computer Won't Detect Scanner?

Jul 20, 2011

I am having some issues with 11.04. My print/fax/scanner is connected directly to the ethernet line, and 11.04 cannot detect the scanner portion through the Simple Scan program. I am using an HP Officejet 4500.

I used to be able to scan perfectly fine when using 10.10, and it just won't work anymore I have the HPLIP toolbox installed, and I can't get it to open/run!

View 1 Replies View Related

General :: Scanimage -L Does Not Detect Scanner

May 13, 2011

I got a new Canon LiDE 110 scanner. It's a very cheap device but the important thing is that it is listed as "completely supported" in the SANE site. I had to compile the latest SANE from sources, but I have no problems with compiling from sources, and now everything runs from the version in /usr/local/... The problem is that "scanimage -L" doesn't detect the scanner. I also don't see any scanners under /dev/... I think it might help if I pass the scanner device with the -d option to scanimage but I don't know how to find out what the device file of it is.

This is what I see with lsusb:
Bus 005 Device 004: ID 1c4f:0003 SiGma Micro
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 04a9:1909 Canon, Inc.
Bus 001 Device 003: ID 046d:080f Logitech, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
The scanner is on Bus 001 Device 007.

View 6 Replies View Related

General :: Ubuntu 10.10 Will Not Detect The Scanner

Jan 22, 2011

I have a 3in1 Epsonsx415, the printing part works perfectly but Ubuntu 10.10 will not detect the scanner.

View 2 Replies View Related

General :: Xsane Is Unable To Detect Scanner Device?

Feb 3, 2010

I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.

View 2 Replies View Related

Ubuntu Security :: Virus Scanner That Will Support To Detect Windows Viruses

Mar 30, 2011

I have been told that some virus scanners for linux (including but not limited to AVG, Antivira, clamAV, others) are available to ubuntu. My question is which of these still CURRENTLY support detection of WINDOWS viruses in addition to linux viruses. I would like to boot the Ubuntu live jump drive I have to scan windows machines and at least detect viruses, dont really need to repair. who knows which virus scanners compatible with ubuntu that will detect windows viruses as well

View 3 Replies View Related

General :: Detect That An User Has Press The Scan Button On An Epson Scanner?

Dec 28, 2010

It seems that they are not shown under xev ...Someone knows if old scanner, can be detected in terms of button pressing ?[URL]button pressing does not show up into deamon.log

View 1 Replies View Related

OpenSUSE Hardware :: Canon MP250 Scanner And Printer Drivers / "Error During Device I/O"?

May 20, 2011

I am trying to get Canon MP250 printer and scanner working in OpenSUSE 11.3 and so far I've had limited success. Both components work up to a point, but aren't fully operational.First of all, I installed the drivers from Canon website for both parts of the multifunctional device. Here's the report on the versions (it's localised, but it shouldn't be hard to understand ).

The printer works for the most part. But it fails to set images to greyscale when I request the driver to. There are some guides about that for Ubuntu, but none for openSUSE that I could find. Also, what does the setting "Amount of Extension" in the printer options do?It would also be nice if I could set the printing quality as well. Right now it seems to print everything with the default quality setting, but personally I like using lower print quality since that saves ink and makes it a little faster.

The scanner, however, is hardly usable at all. If I try to use Canon's ScanGear MP to scan, I can hear that it operates the scanner, but the program itself freezes and after a while gives me the "Cannot communicate with scanner" error. On certain settings I can also hear that the scanner itself doesn't complete the scan (the indicator on it also reports an operation in progress, but it never gets completed).If I try to use Acquire images, the native KDE scanner application, I can get it to scan, but only on very specific settings: it must scan it in colour and the resolution must be equal to or over 300 dpi. If I try anything else, the resulting image file is completely blank or I get an "Error during device I/O". And, of course, it can't save PDF files.

View 5 Replies View Related

Debian Hardware :: After Compiling SANE, "scanimage -L" Does Not Detect The Scanner?

Aug 5, 2010

I found someone who has a CanoScan 9000F (the new Canon flatbed scanner replacing the 8800F which is already supported in SANE 1.0.21), and managed to find out that it also uses the PIXMA protocol (the protocol used in the scanners for Canon's multi-function printer/copier/scanner devices of the PIXUS/PIXMA MP series (and other names depending on sales region).

Support for the scanner has therefore been added in the pixma backend. However, the initial tester is having trouble compiling and configuring SANE from source, so I am hoping there will be some people here who have access to this scanner and can try to help out as well.

After compiling SANE, if "scanimage -L" does not detect the scanner, probably "usb 0x04a9 0x1908" needs to be added to /etc/sane.d/pixma.conf and /usr/local/etc/sane.d/pixma.conf.

After that slow steps need to be taken to get support for the various resolutions, as this scanner as double the number of CCD rows as the 8800F, and can do double the resolution (up to 9600dpi) optically.

View 14 Replies View Related

Fedora Hardware :: Endless USB Loop - Detect - Disable - Detect

May 2, 2010

I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.

A small sample of what keeps on repeating:


View 1 Replies View Related

Ubuntu :: Is CanoScan LiDE 600F Supported In 10.10

Apr 12, 2011

Is the Canon scanner .. CanoScan LiDE 600F .. supported in ubuntu 10.10?

This scanner works in Vista.

In ubuntu I ran ..


No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Then I searched through this ..

Desktop Hardware Incompatibility List



View 2 Replies View Related

Hardware :: Driver For Canoscan 3000 Ex For Ubuntu 10.04?

Sep 6, 2010

I cannot connect my scanner in ubuntu :S it is a canoscan 3000 ex and says to me that there is no support for linux.

View 1 Replies View Related

OpenSUSE Hardware :: Driver/ Backend For CanoScan 3000?

Mar 3, 2010

Have very recently installed Open S on my PC. As it's all really new 2 me have been strugling a bit to get things to work @ first. Now it's much better but my bleeping scanner won't work for love or money, apparently the Linux driver ( or should I say backend) for the thing has not been created. Its CanoScan 3000 and I still have the discs with Windows setup. Is there any way to get that thing work under Linux or should I get another scanner? Obviously, me writing the backend, is not really a very realistic option.

View 1 Replies View Related

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

Hardware :: Using Iscan By Epson CX9300F - Could Not Send Command To Scanner - Check Scanner's Status

Mar 17, 2010

After downloading and installing iscan and run it i see this message:

Could not send command to scanner. Check scanner's status.

After command sane-find-scanner:

And this message is result of scanimage command:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status

Apr 9, 2010

Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports

'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..

View 3 Replies View Related

Ubuntu :: XSane Image Scanner Won't Recognize Scanner?

Sep 7, 2010

I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.

View 9 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved