I've a new HDTV card: Avermedia AverTv Digi Volar Ex( DBT-T, USB 2.0). Has any been able to use it with OpenSuse 11.2? Is there an easy way to configure it? I've tried with yast, but nothing.
View 8 RepliesAvermedia AverTV volar GO is a pure analog External USB TV tuner device. I recently purchased it and struggling to get it working on Ubuntu 10.10. Ubuntu detects the card , as we can see it from lsusb, but tvtime doesn't find any /dev/video0 device. Also there is no mention about the device in dmesg. I had mailed Avermedia enquiring Linux support. However , they replied that they donot have Linux driver for this model. Is there any way we can get this work on Ubuntu.??
[Code]...
I have an AverTV Hybrid Volar MAX.I really would like to get the FM radio tuner working with this on my laptop. When I do 'sudo fmscan' I get the following:ioctl VIDIOCGTUNER: Invalid argumentI have downloaded and installed the drivers from AverMedia's web page (TV is working).This is on a Compaq Laptop (Presario V5305WM) on a fresh install of Jaunty.
View 1 Replies View Relatedto set up my usb, digital TV Tuner, an AVerTV Hybrid Volar HD (H830) , to work with MythTV? I note that the 'MythTV backend set-up', only refers TV Tuner cards, not usb sticks. Nevertheless, the link above provides a 'Linux x86' driver for my computer � a .tar.gz file. The link also provides an accompanying text file that asserts 'This package is tested with MythTV against Ubuntu 10.04'. I've recently installed Ubuntu 11.04.The accompanying text gives its pre-requisites as a. support linux kernel 2.6.29 or later. b. make sure /lib/modules/`uname -r`/build exists c. make sure "dvb_frontend.h" exist in your Ubuntu. d. kernel modules dependency: videodev, video buf-core, v4l2-common.
For (b), my computer shows the following path /lib/modules/2.6.38-10-generic/build$ I'm note sure what (c) means with 'in your Ubuntu' Needless to say, its later instruction doesn't work Install driver to system sudo ./xxx_LinuxDrv_x86_vxxx-beta_Install.sh I'm told that this 'command not found'
I can't find it in /dev/video0 or anywhere else
Which means it's there?
I can't find it in lspci
How i might get it to work.
I have a TV Tuner Card (AverTV Super 009 from AverMedia). I am not able to work with it. My dmesg output is here. [URL]
It says my card number is 180 and tuner 1-42. I have tried all the 42 numbers in the tuner option in the modprobe command (modprobe saa7134 card=180 tuner=1 to modprobe saa7134 card=180 tuner=42). But result is not good. The file CARDLIST.saa7134 in kernel.org displays my device [URL]?
[Code].....
I have installed a new TV Tuner Card. AverTV Super 009 TV Tuner Card from Avermedia. I am using Fedora 14. How can I make the above card work for me? (I am not proficient in Linux.)
View 6 Replies View RelatedHow to configure sound card in opensuse 11.1. I tried some of the solutions like alsaconf but its not working .... Also please tell me how to find model of sound card that I have in my laptop. Laptop that I am using is DELL inspiron15r, core i5.
View 1 Replies View RelatedI installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.
View 4 Replies View RelatedHow to configure X Window on opensuse 11.4 and older x86 hardware with 32MB graphic card?
View 9 Replies View RelatedInstalled a TP-Link TG-3269 Gigabit card in a machine running OS 11.3 32 bit, when I go into Yast, Network Devices, Network to try configuring the card I get this errormsg: Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. Couldn't find any mention of the card in dmesg's output, (though the 8139 onboard card is in there) there is some stuff about pci host bridge but I don't know whether they would be relevant or not
The chip on the card says it's rtl8169sc but lspci lists it as being 00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8369 (rev 10) Done some googling and there don't seem be any drivers for a Realtek 8639 and it returns no matches from a search on realtek's site, but there is a driver there for rtl8169sc chips, which I downloaded and installed, no errors when installing it Even after a reboot I still get the same error in Yast's Network Settings screen, lspci still lists it as 8369 and the device isn't listed at all if I run ifconfig
I am running Debian Squeeze stable on a bare atom board. Only yesterday I installed an analog PCI TV tuner (AverTV Super 009). But I am unable to tune any TV/FM channel. Is it that the stock squeeze kernel doesn't have driver for this particular card? Or I'm missing some bits in configuration? Do I need to upgrade kernel (is any later kernel available in backports)? Here is some info that you may require:
[Code]...
I'm trying to get a Digi Edgeport/8 working under x86_64 CentOS 5.3. This is a USB to serial conversion box that takes a single USB port and breaks it out into 8 DB-9 serial ports. We're running the 2.6.18-128.el5 x86_64.
This box has worked fine on many systems for us from RedHat 7.3 to Fedora Core 5 from everything back to the 2.4.20 kernel up to 2.6.16.16. On the CentOS box, in /boot/config-2.6.18-125.elf, the following is set:
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
Which is all we've ever had to do in the past and plugging the box in to the system, it will auto-configure.
what I need to do to get this working in the CentOS 5.3 64-bit world??? Time is critical for this to get fixed!
I have a capture tv card in my pc, but i can't configure it. It's a TV Tuner PRO ENLTV-FM Encore Electronics. I have all the System Requeriments and I've downloaded a program called MeTv to use it, but it's not working. The message that i have of this program is:
Code:
There are no DVB Tuner Devices
I've read on the net that I have to alter something in the kernel called bttv with the
[code]....
Actually I had solved this problem back to 8.10, but now on maverick, none of the tricks have worked. Either I have a low sound and the speakers keeps going on with the headphone plugged in, or there is no sound at all. On this thread:Quote:http://ubuntuforums.org/showthread.php?t=995940I had it solved, but now, none of this configurations seems to work, and something has changed as you can see, this was my old aplay -l list:Quote:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
[code]....
I have installed linux on my system. I have connected two ethernet cards in the CPU. I have then connected one cord to one card from the modem. Its working fine. I have connected another cord from the second port to the switch and there by from switch to other systems. However the system is not detecting the second card. I am a newbie to linux and I don't know how to configure it.
View 3 Replies View RelatedThe audio chipset on my motherboard was is very new and apparently not yet supported in Linux. I disabled the on-board audio card in the BIOS and installed an old Sound Blaster 32 PCI card figuring I can surely get it to work. How do I get the OS to detect &/or configure this new card. I did some searching and found several articles saying to run redhat-config-soundcard &I don't seem to have that command on my systemHow do I configure this new audio card?
View 2 Replies View RelatedHow to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal
[code]....
lenovo r500, intel wireless card : iwl5100.i installed backtrack pre 4 on virtualbox ose.i have ubuntu 9.10 but i cant see my wireless card...where is wlan0? how can i configure my wireless card on bt4 on virtualbox?
View 3 Replies View RelatedWe have several new DELL STUDIO-XPS machines pre-packaged with Win7 onto which we intend to load 10.3 the 2.6.22.5-31-default kernel as a dual boot.
The first test machine however is showing reluctance to reveal its NIC under SuSE. The card in question is a Broadcom Netlink (TM) Gigabit Ethernet with driver version 12.4.0.3 under Windows.
The error message I recieve under SuSE is "Unable to configure network card because kernel device is not present".
ifconfig confirms this showing only the loopback device.
The tg3.ko driver seems to be OK (although I am not sure how to interogate this file for its vesion?). It is listed under /sbin/lsmod and I have attempted a rmmod followed by an insmod but thsi seems to have no effect.
Talk on the net suggests Windows will not 'let go' of the card on a dual boot machine but this seems unlikely and I have attempted the various power down options without success.
I have installed a 9200 Radeon (the card says 9250 on it, but computer reads as 9200) on a AMD Sempron 2500+ 64 bit,Ubuntu 10.04 Gnome 2.30.2, Kernel Linux 2.6.32-26; Samsung VGA 941BW monitor.
A friend told me if I added more RAM (512mb), the card would run properly & the graphics would be stellar.
He also told me the drivers were installed.
When I did this & started the computer, before I got to my login, a box appeared, telling me my graphics were running in "Low Mode", & do I want to configure them. When I said "Yes", it told me to restart. When I did, nothing happened & the video card is still running on "low". I checked the fglrx info, and was told "command not found".
how to configure lirc with my card saa7134 card=42 tuner=41 here is what i get with
cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
[code]....
I am using Redhat enterprize linux and using ethernet card Realtek PCIe FE Family Controller. I tried to configure my network card. But unable to activate it as message appears "No such device found" I am using Dell inspiron laptop.
View 5 Replies View RelatedTell me how to configure my Ethernet card to work. My pc only works wirelessly. I don't know what kind of Ethernet card is installed. I have Ubuntu 10.4 on a dell pc 1ghz, 20ghd, 512mb.
View 2 Replies View RelatedI have an old PCMCIA card and I would like to use in a newly installed centos5.6. I want to use, but I do not know how. ifconfig-a does not return the card details. I can see the pci devices both the controller and the PCMCIA card as well. I read, I have to load the kernel module yenta to use the pcimcia card, but I couldn't. The /sbin/modprobe -l | grep "yenta" does not return anything, and do not have either of these modules in library
(find /lib/modules/`uname -r`/kernel/ | grep yenta)
How I can move forward welcome, or where should I start to search or indeed whether the card can support? How to config PCMCIA Card at CentOS5 now?
# lspci -vvv
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Dell Device 0233
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- ...
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8039 (rev 10)
Subsystem: Surecom Technology Device 0428
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- ...
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
# lspci -nn
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. Device [10ec:8039] (rev 10)
# yum list | grep pcmciautils
pcmciautils.x86_64 014-5 installed
# uname -a
Linux localhost.localdomain 2.6.18-238.el5 #1 SMP Thu Jan 13 15:51:15 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
I have moc running well in Debian 6. However, I cannot get moc to playback music via my USB DAC card, it only plays back through my soundcard. I use ALSA for playback.Is there any way that I can configure moc to play music through my DAC card as I do through Audacious?
View 7 Replies View RelatedHow to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal [tanmoy@localhost ~]$
4. Type su -l and enter
5. You have to Type your Password as a super user.
[tanmoy@localhost ~]$ su -l
Password:
[root@localhost ~]#
6. Plug in the USB DATA CARD.
7. Write lsusb and press enter for acknowledgement of detecting the USB device.
[root@localhost ~]# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I have INTEX TV tuner card. i'm trying to configure in ubuntu for tvtime. The card has the saa7130 or saa7134 philipse chipset.
lspci | grep -i saa713
output:
Code:
00:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
after the installation, the card was detected and /dev/video0 was created but dmesg indicated that the card is not among the ones listed as supported and since card did not have EEPROM, the card was not up and running right away.i have edited /etc/modprobe.d/tvcard.conf and added options saa7134 card=3 tuner=14
Code:
$sudo nano /etc/modprobe.d/tvcard.conf
added:
Code:
options saa7134 card=3 tuner=14
Then CTRL+X to exit
still it did not work. tvtime would always say no signal and tvtime-scanner never picked up any channels. then i followed instruction given by rsramkee [URL]. edited saa7134-cards.c and deployed new kernel linux-2.6.36.2 with changes.i rebooted machine to windows selected one channel in tv tuner software of windows, again rebooted machine to ubuntu (i have dual boot windows XP and ubuntu 2.6.35.23). tvtime able display video of channel that is selected in windows OS (No sound), but not be able to tune any other stations.In mplayer able display video of channel that is selected in windows OS with sound.
command:
Code:
mplayer tv:// -tv driver=v4l2:chanlist=us-cable:alsa:adevice=hw.0,1:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:norm=PAL
i followed instruction given by http://linuxtv.org/wiki/index.php/Saa7134-alsa to set up sound. loading the loopback module with the command:
$ pactl load-module module-loopback
Now tvtime able display video of channel that is selected in windows OS with sound, but not be able to tune any other stations. Not be able to tune any stations.dmesg output:
Code:
[ 1320.568603] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 1320.568697] saa7130[0]: found at 0000:00:0a.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffff800
[ 1320.568737] saa7130[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000 [card=2,insmod option]
[code]...
i'm not be able to tune any stations using tvtime and xawtv. if channel is not selected in windows OS for more then 1 hour then tvtime displays message no signal, same message in tvtime-scaner (No sound).
I'm trying to configure my network card using the b43 driver. I'm running 10.04.2 on the kernel version 2.6.35-25-generic-pae.
Surprisingly, I was able to connect to my home wireless network using the b43 driver without a problem. The only issue is that it doesn't automatically connect. I have to use the following command in order to get it to work:
Code:
After typing my password, I wait for 10 seconds and am automatically connected. My question is, how do I configure my system to do this for me permanently (or at least automatically) so I don't have to type it every time I log on?
I am using FC6 on my system, I tried to configure the soundcard using, system-config-soundcard utility. But once I type system-config-soundcard from my shell, it doesn't start at all. However its not showing any error also. What can I do next?
View 1 Replies View Related