Hardware :: Configure Radeon Video Card ?
Dec 15, 2010
I have installed a 9200 Radeon (the card says 9250 on it, but computer reads as 9200) on a AMD Sempron 2500+ 64 bit,Ubuntu 10.04 Gnome 2.30.2, Kernel Linux 2.6.32-26; Samsung VGA 941BW monitor.
A friend told me if I added more RAM (512mb), the card would run properly & the graphics would be stellar.
He also told me the drivers were installed.
When I did this & started the computer, before I got to my login, a box appeared, telling me my graphics were running in "Low Mode", & do I want to configure them. When I said "Yes", it told me to restart. When I did, nothing happened & the video card is still running on "low". I checked the fglrx info, and was told "command not found".
View 2 Replies
ADVERTISEMENT
Jan 19, 2010
I'm running Ubuntu 9.10 on an HP Desktop with an ATI Radeon 2600 pci card that has four outputs. I want to run the same 3-monitor array that I had in windows. Is it possible to get this thing running and configured right in Linux? At the moment I can only get it to send a signal to 2 monitors. I installed the drivers step by step from the manufacturer, but I can't seem to get a signal to all 3 monitors.
View 6 Replies
View Related
Feb 20, 2009
There is running gOS on my computer (Ubuntu baset OS) and I want to install the Video Card driver for ATI RADEON 9250.
Ifound the driver in the official site =>> http://ati.amd.com/support/drivers/l...n-prer200.html
And I also saw the instructions of installation =>> [url]
But I cant instal the driver. When I write the comand sh ./ati-driver-installer-8.28.8.run (of course the file is in the home directory)the terminal window writes:
PHP Code:
And then written in the instruction: The ATI Proprietary Linux Driver Setup dialog box is displayed but no window or dialog box is displayd.
View 4 Replies
View Related
Feb 14, 2011
Using this video card but unable to find the setting for it in the options. I am using a generic VGA setting right now and it's getting less than optimum resolution. What's the proper setting for this card?
This is RedHat Enterprise edition.
The machine is Dell OptiPlex 745
The monitor is Dell 2005FPW (Digital)
The graphics is:
ATI Radeon X1300 Professional
View 8 Replies
View Related
Aug 27, 2011
I'm attempting to get Debian (Squeeze, latest net-install CD) working on a Power Mac G5 Quad with a Radeon X1900 Mac edition video card (PCI-Express.) The installer acted a bit weird right from the start, telling me that the step "Install the system" failed (with nothing in the way of useful error information,) but I got the base system installed at least. It booted fine to framebuffer console, so I set about installing GNOME on it. apt finished with nary a complaint, but when I rebooted, I found that when it's ready to launch into X, it chokes up and just sits there with a blank screen and a cursor. (Weirdly, though, the screen itself flickers on and off at a high rate, faster than the actual cursor blink.)
Framebuffer console still works, at least, so I was able to boot into single-user mode and do some investigating in my own limited capacity for this stuff (by which I mean "Google error messages and see what specifics are requested.") lspci -k shows the video card properly with the manufacturer and product name, so it is recognizing it, at least. When I try Xorg -configure, though (Xorg 1.7.7, it says,) it aborts with a "No DRICreatePCIBusID symbol" message. Checking dmesg gives me a "process Xorg mapped non-existing PCI legacy memory" message, followed by an "invalid ROM contents" message underneath.
I'm not sure what all to make of this. I've found a thread about problems getting the same basic setup (G5 Quad, X1900, Debian) to work, but it's a couple years old and the symptoms are different. There's some discussion there about the radeon/radeonhd driver looking for Atom BIOS information on non-Atom BIOS cards, which would explain the "invalid ROM contents" message, but on the other hand, if lspci recognizes the card properly, would that be the problem? I don't know. Obviously it's playing nicely enough to run framebuffer console output properly, but beyond that I have no idea. I'd really like to get this working - it'd really improve things over the GeForce 6600 it came with...
View 1 Replies
View Related
Aug 18, 2010
a powermac G4 with radeon 9000 RV250 in ubuntu 10.04 ppc i just want the graphic work better
View 9 Replies
View Related
Jun 22, 2011
I recently bought 1GB video card of 'xfx radeon hd 5450'. It came with cd for drivers of windows.
I installed fglrx. Still in ubuntu 10.10 (lucid) I ran: lspci -v | grep -i prefetchable
which shows 256M which is video memory of my ASUS motherboard.
View 4 Replies
View Related
Aug 10, 2009
I've loaded Fedora and must say what a nice OS! But I'm having some issues getting the video working correctly so let me jump right into the issue. The video is very garbled and hard to read. can't seem to find a way to correct what would appear to be a driver issue. Here are a list of things tried:
- display works fine with Ubuntu
- display is clear but is chopped off when using an external monitor from onboard vga slot
The video card is an ATI radeon and the linux drivers from the ATI site don't work with the new images that are out yet.
View 3 Replies
View Related
Mar 29, 2011
Will Fedora 15 support this video card on laptops?
View 2 Replies
View Related
Jun 14, 2010
I'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
View 4 Replies
View Related
Jul 22, 2010
I'm a new Mandriva user,and have no clue about Linux system,but to be honest I don't want to use Windows product anymore. So I got the Mandriva 1 Spring Gnome,and installed it on my DELL Optiplex Desktop,works fine and very fast,therefore I decided to do the same with my Studio XPS 1640,but after I got a dark screen,so I used an external display(My TV) then realized that it doesn't support the video card on it ( ATI Radeon HD4670 ),and I don't know what to do.
View 1 Replies
View Related
Dec 14, 2010
I have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
View 1 Replies
View Related
Apr 24, 2010
I have a pinnacle callisto video capture card which I am having trouble getting to work.
lspci
lsmod - notice that the saa7146 module is not loaded. If loaded manually the card is still not found.
Dmessg does not show the card.
View 2 Replies
View Related
May 24, 2009
I been searching for months on how to get the s-video to work on my pci VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] card. I found a site with instructions.
This is how I got it to work.
I install Debian 5.0 Lenny Desktop
added the Driver "radeon" to my /etc/X11/xorg.conf file
This work and I was able to use my tv as a monitor however when I try to play a video file from totem or vlc all I could get was audio with no video; These files work and played fine in the CRT monitor.
View 2 Replies
View Related
Jul 30, 2011
configuring my AMD radeon 6670 with ubuntu. how do i use this card with ubuntu?
View 9 Replies
View Related
Apr 1, 2010
I recently decided to upgrade my old desktop instead of buying a new one. I figured I would go ahead and max out the specs on the motherboard while I was at it. I had a standard AGP slot and the best graphics card I could find for AGP was the Radeon HD 4650 (AGP 1GB GDDR2). So I ordered the parts and went on my merry way.I installed the card and did a fresh install of 9.10, hoping to max perform my "new" system. The card was acting kinda fishy on the live boot and I had to reboot a few times before it magically worked. I got installed etc and when I booted it worked, but it turned out performance was painful. When using Firefox the delay when scrolling down the screen was literally unbearable. No problem right, I used the restricted drivers app to go ahead and install the ATI drivers hoping that it would auto-magically fix things.
System booted but once I logged in the screen would just fill with freezing and garbage so it was impossible to get anything done. I experimented with all three options but this is what ended up being my solution. Download your ATI driver using this site: AMD Graphics Drivers & Software Just select Linux in the OS Select column.
View 8 Replies
View Related
Jan 5, 2011
After installation of the new hardware I activated the ATI closed source driver. There is an issue with the screens
1st screen, via DVI: I cannot change to the native screen resolution
2nd screen, via VGA: The background of any window is not drawn.
Means: I can see lots of parts of other windows after moving or closing them.
Therefore I was searching for an alternative and found the hint to uninstall the ATI driver and use the open source one. After uninstall and reboot (requested by a parallel system update), some boot messages I have no screen output anymore. Means: two black screens. These are going into sleep mode after a few seconds. How can I get a running system again? Optimal would be, that I have full support for both screens. Same happens in failsave mode.
System environment:
Ubuntu 10.04
AMD Athlon 64 X2 3800+, 4G RAM, motherboard ALiveNF6G-DVI (internal graphic deactivated), ATI Radeon HD 5450
View 6 Replies
View Related
Apr 21, 2010
I'm looking at buying this card and I'm wondering if anyone here has had an issue using this card with Ubuntu(currently on 9.10)
[URL]
View 3 Replies
View Related
May 17, 2010
Fedora 12, latest kernel, x86_64.
I have an Asus M4A78L-M motherboard that has integrated ATI Radeon HD3000 video. Should I be looking for a driver specific to the integrated video, or should I be looking for a driver specific to the motherboard? I'm not sure if I should look for something different if the video is integrated onto the motherboard, as opposed to a separate video card. This is what I found: http://support.amd.com/us/gpudownloa...5&lang=English
Are there best practices for updating video drivers before I make any changes? I don't want to hose my video.
View 12 Replies
View Related
Jun 24, 2010
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
View 3 Replies
View Related
May 12, 2011
I have a Radeon HD 5830 card and it just doesn't seem to be working to it's full potential. I've tried TF2 and SC2 through the latest stable release of Wine, but the frame rates are horrible.
Also, when I run fgl_glxgears, I only get 800fps. (If I reboot the computer and run fgl_glxgears as soon as I log in, I get at least 3000fps for a few seconds. Then it's back to 800)
I've tried reinstalling the driver several times.
Why is the performance so low?
Here's my setup:
XFX Radeon 5830
Ubuntu 11.04 (fresh install and updated)
11.5 ATI driver from AMD's site. Here is fglrxinfo output:
[Code].....
View 9 Replies
View Related
Apr 14, 2010
I had a problem with OpenGL on my computer (I run Ubuntu), and so I created a thread here: [url] but it turned out that the problem was with my graphics card, so I made a new thread at the Ubuntu forum at [ubuntu] Problem with OpenGL in Ubuntu - Ubuntu
View 4 Replies
View Related
Aug 6, 2010
I decided to put a Radeon 8500DV card in my Slackware box. Works fine with the Vesa driver. Problem is, I'm using a widescreen monitor, and Vesa doesn't support my default resolution (1366x768). So I thought I'd do a little editing in my xorg.conf file and fix it right up.
I logged on as root, and did "X -configure", then I went in and edited the file it made me and put in the appropriate values for my monitor and resolution. And then it copied it over my xorg.conf file, and typed startx. Voila! Looked great, and I checked the settings to be sure I was in 1366x768. It worked fine!
Once.
Then I logged out and tried "startx" with my user account. As soon as I do, my monitor displays "No Signal"... weird - cause it just worked. So I rebooted, and logged on as root, and tried startx again. "No Signal"
So why would it work just once and not again. I tried repeating my steps exactly, and still can't get it to come up.
Here is the xorg.conf I used when it did work:
Quote:
Originally Posted by xorg.conf
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
[Code].....
I tried removing the Card1 and Screen1 sections (since they are invalid), but that made no difference.
View 14 Replies
View Related
Sep 7, 2010
according to this, the radeon kernel module is not recognizing my card. This is disabling DRM in Xorg.
Here are the Xorg errors:
Code:
(II) Loading extension XFree86-DRI
(II) Loading extension DRI2
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
[Code]....
View 7 Replies
View Related
Jan 25, 2011
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies
View Related
Mar 22, 2011
I recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies
View Related
Jun 19, 2011
Got a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies
View Related
Feb 17, 2010
I have a new system with an ati mobility radeon hd 5730 chip. As far as I know, there are new drivers in the works, but aside from some articles, I haven't found anything that specifically tells me how to get them installed/working (at least, so that it works for the 5000 series of radeon chips).Has anyone had any luck with this yet? I'm just at the stage of installing, so I don't really care if it involves a different distro, etc. I've tried Ubuntu 9.10 and 10.04-alpha2, as well as Fedora 12 (from the live CD) and so far no luck.At the moment, all I care about is getting the native 1600x800 working for my screen. I haven't a clue how do do that...it seems like I might be able to do this using xrandr, but I don't know how to create a mode properly.
View 6 Replies
View Related
Jul 15, 2010
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
View 6 Replies
View Related
Jun 12, 2010
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
View 1 Replies
View Related
