I have a TV Tuner Card (AverTV Super 009 from AverMedia). I am not able to work with it. My dmesg output is here. [URL]
It says my card number is 180 and tuner 1-42. I have tried all the 42 numbers in the tuner option in the modprobe command (modprobe saa7134 card=180 tuner=1 to modprobe saa7134 card=180 tuner=42). But result is not good. The file CARDLIST.saa7134 in kernel.org displays my device [URL]?
[Code].....
I have installed a new TV Tuner Card. AverTV Super 009 TV Tuner Card from Avermedia. I am using Fedora 14. How can I make the above card work for me? (I am not proficient in Linux.)
View 6 Replies View RelatedI am running Debian Squeeze stable on a bare atom board. Only yesterday I installed an analog PCI TV tuner (AverTV Super 009). But I am unable to tune any TV/FM channel. Is it that the stock squeeze kernel doesn't have driver for this particular card? Or I'm missing some bits in configuration? Do I need to upgrade kernel (is any later kernel available in backports)? Here is some info that you may require:
[Code]...
to set up my usb, digital TV Tuner, an AVerTV Hybrid Volar HD (H830) , to work with MythTV? I note that the 'MythTV backend set-up', only refers TV Tuner cards, not usb sticks. Nevertheless, the link above provides a 'Linux x86' driver for my computer � a .tar.gz file. The link also provides an accompanying text file that asserts 'This package is tested with MythTV against Ubuntu 10.04'. I've recently installed Ubuntu 11.04.The accompanying text gives its pre-requisites as a. support linux kernel 2.6.29 or later. b. make sure /lib/modules/`uname -r`/build exists c. make sure "dvb_frontend.h" exist in your Ubuntu. d. kernel modules dependency: videodev, video buf-core, v4l2-common.
For (b), my computer shows the following path /lib/modules/2.6.38-10-generic/build$ I'm note sure what (c) means with 'in your Ubuntu' Needless to say, its later instruction doesn't work Install driver to system sudo ./xxx_LinuxDrv_x86_vxxx-beta_Install.sh I'm told that this 'command not found'
I've a new HDTV card: Avermedia AverTv Digi Volar Ex( DBT-T, USB 2.0). Has any been able to use it with OpenSuse 11.2? Is there an easy way to configure it? I've tried with yast, but nothing.
View 8 Replies View RelatedI have a TV tuner card with its output connected to the CD in of an integrated sound card. Video is OK, and the sound also gets thorough (to the line out) when running xawtv, for example. However, I found no ways yet for recording it.I'm running Ubuntu 10.10 with ALSA drivers. Pulseaudio was running in the beginning, now it doesn't, but it doesn't seem to make much difference.
capturing with VLC, using plughw:0,0 as the audio capture device. (Result: no sound track at all in the resulting video.)arecord, then aplay.alsamixer. The capture source is set to "CD" (and on the input side it's also "CD" where I can effectively modify the volume for audio going through...), but still no result.
I got a vaio vgn-ar21s laptop that under yast reports to have a tv card: saa7131/saa7133/saa7135 Video Broadcast Decoder
However if I try to choose a tuner (bottom on the right bottom of the yast window for Manual TV card selection, I get "No tuner is available for the selected card".Can this be set up somehow under opensuse 11.2 ? I am running kernel 2.6.31.12-0.2-desktop x86_64
The card works under windows (I can see most digital tv channels [I am in the UK]), but I would prefer to use it under opensuse, of course.
I haven't had one for years, so i am not even really sure what options to look for. So i need to be able to stream media, record media, record cable box, play cable box, listen to local FM radio would be really nice.
View 1 Replies View RelatedI am needing a tv tuner card that is compatible with linux. My tv went out so i need to be able to hook up my directv receiver to the card.
View 10 Replies View RelatedIf my webcam is plugged in when I start up my computer, it ends up being the only thing I can use -- I can't switch off of it in tvtime. If I leave it unplugged and restart my computer, I can then use my TV tuner card.
View 1 Replies View RelatedA while ago I reinstalled Ubuntu on my PC when I felt that Windows was about to give up. I'm glad I did. A lot of the applications I had on my Mac had equivalents on Linux, I was delighted and I haven't been needing Windows at all.
Up until recently everything was working fine, but now I think Linux is mixing up my Sound Card with my TV Tuner. When I call someone using Skype, it ends up airing white noise, however, if I've watched TV prior to that, it ends up airing the sound from whatever channel I was watching last. If I turn on the video calling function (despite the fact that I haven't got any webcam plugged in) it ends up airing video from that same channel.
It just started doing this randomly, and as I did some experiments, I discovered that it does this with all audio-input applications. (Sound Recorder etc,)
So I installed Pulseaudio device manager, and I discovered that my soundcard isn't listed under output devices.
A few nights ago, I was trying to set up a tv tuner card and I somehow ruined my OS. When I log into Ubuntu, all I get is errors and a blank screen. Since it was an older version, I decided to upgrade to the latest version, 10.10. So I figure that I get a live cd, transfer all my wanted files to an external drive, then install the new OS. I got the live cd and when I boot it, I get some picture at the bottom of my screen with some stick figure and what looks like a piece of film, then my monitor resets and says "Out of range" What can I do to fix this problem? I am currently on a Knoppix 2.6 live cd.
View 4 Replies View RelatedI have 2 tv cards that I have successfully configured to work in linux.But this 3rd one I bought recently seems to have a problem. The card is not autodetcted (that's really not the problem) but when I try to load saa7134 with:sudo modprobe saa7134 card=xx tuner=xx, it loads whatever card I indicate but the tuner never changes. This is part of the output of dmesg:
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[code]....
Way back in the day when I was running Windows I used a Compro Tv Tuner Card which had nice, easy to use drivers for XP. Now that I'm using Ubuntu, I wouldn't mind getting another Card myself (old one died on me) and was wondering what brand was the most linux friendly so to speak?
View 3 Replies View RelatedI have a pinnacle 800i that i just setup and video to work which was a pain but now i cant get audio to work.
View 3 Replies View RelatedI have a sabrent tv tuner card (tv-pcirc). I want to use it in vlc but don't know how to change from the composite source to the tuner source and from there don't know how to change channels (is there a program that generates channels.conf for analog channels?) It would also like to know how to record a certain channel for a certain period via the telnet interface. Another thing I would like to know is how to set up the remote with it, because the audio is very soft and I would like to raise the voume.
My card is using card=42 tuner=43.
I am using Fedora 13, kernel 2.6.33.3-85. I have a TV tuner card and lspci shows this:
01:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
Which software should I use to view TV on my PC? Also, how should I check that the drivers/modules for my TV tuner has been loaded or not ?
Is there anyway I can connect my desktop to a satellite tv decoder and watch the stations from my desktop? I only know tbs 6981 dual tuner card.
View 1 Replies View RelatedI'm looking for an HDMI-capable TV Tuner card (that preferably works with linux).
View 9 Replies View RelatedHas anyone had any success with installing the HVR-950Q TV Tuner card? I am trying it after giving up on the hvr-1500c (15 months trying!).
View 9 Replies View RelatedHow do i install a intex TV tuner card
I am very new to ubuntu and only know to use a little of it.
I have a intex tv tuner card with FM.
how do i add this as my hardware
i wa earlier using windows XP and i also have drivers for XP and inter video Win DVR application for viewing TV on XP.
But on ubuntu how do i see TV and how do i install the card.
How do i install intex tv tuner card (PCI ver 2.1) on ubuntu 9.01 I have installed myth tv my problem is which card do i select i selected Analog card and MJPG as well but when i go to scan for channels says FAILED TO OPEN CARD.
View 1 Replies View RelatedI have INTEX TV tuner card. i'm trying to configure in ubuntu for tvtime. The card has the saa7130 or saa7134 philipse chipset.
lspci | grep -i saa713
output:
Code:
00:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
after the installation, the card was detected and /dev/video0 was created but dmesg indicated that the card is not among the ones listed as supported and since card did not have EEPROM, the card was not up and running right away.i have edited /etc/modprobe.d/tvcard.conf and added options saa7134 card=3 tuner=14
Code:
$sudo nano /etc/modprobe.d/tvcard.conf
added:
Code:
options saa7134 card=3 tuner=14
Then CTRL+X to exit
still it did not work. tvtime would always say no signal and tvtime-scanner never picked up any channels. then i followed instruction given by rsramkee [URL]. edited saa7134-cards.c and deployed new kernel linux-2.6.36.2 with changes.i rebooted machine to windows selected one channel in tv tuner software of windows, again rebooted machine to ubuntu (i have dual boot windows XP and ubuntu 2.6.35.23). tvtime able display video of channel that is selected in windows OS (No sound), but not be able to tune any other stations.In mplayer able display video of channel that is selected in windows OS with sound.
command:
Code:
mplayer tv:// -tv driver=v4l2:chanlist=us-cable:alsa:adevice=hw.0,1:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:norm=PAL
i followed instruction given by http://linuxtv.org/wiki/index.php/Saa7134-alsa to set up sound. loading the loopback module with the command:
$ pactl load-module module-loopback
Now tvtime able display video of channel that is selected in windows OS with sound, but not be able to tune any other stations. Not be able to tune any stations.dmesg output:
Code:
[ 1320.568603] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 1320.568697] saa7130[0]: found at 0000:00:0a.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffff800
[ 1320.568737] saa7130[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000 [card=2,insmod option]
[code]...
i'm not be able to tune any stations using tvtime and xawtv. if channel is not selected in windows OS for more then 1 hour then tvtime displays message no signal, same message in tvtime-scaner (No sound).
I have a Phillips SAA7130 TV Tunner card and seems to have installed correctly. I have Xaw TV program on Ubuntu 10.10. I am unable to get the Video. I tried 3 players and in none I am able to see the video. The source in all programs says 'Default' and am unable to choose the card as source. I am also ok to allow remote login to check.
View 7 Replies View RelatedEver since installing a 2nd tuner card Kaffeine has become unstable and now it won't run at all. It hangs a few seconds after starting up. If I run it from the command line I get the following (see below).
I'm runing Mandriva 2008.0 Kde 3.5.7, Kaffeine 0.8.5.
------------------error:
$ kaffeine
0
kaffeine: Found DVB device.
/dev/dvb/adapter0/frontend0 : opened ( Conexant CX22702 DVB-T )
/dev/dvb/0/frontend1 : : No such file or directory
[Code].....
I've been trying to configure this generic remote that came with a TV tuner card (saa7134) a while ago but I haven't been able to do so. The thing is that the remote works, in fact some buttons are recognized properly... but some are not. I'm not using lirc!, from I have been reading there is support for generic remotes in the 2.6.31 kernel, besides, i can't configure lirc, it doesn't let me load the kernel modules to start up the daemon for the ir. is there a config file for the button mapping of the native remote support in kernel 2.6.31?. Been searching it but couldn't find it.
View 5 Replies View RelatedGateway desktop running Ubuntu LL 10.04(64 bit) with Asus/ViXS Combo-210E NTSC/ATSC TV Tuner card: link to card... [URL] Ubuntu lists the card when I do lshw in a terminal but it shows as 'unclaimed'. Is that important? Also what software is neccessary to watch tv? The card works fine in Windows7
View 6 Replies View RelatedI have an almost noname tv tuner card: Vivanco PCI EASY BG/DK. Lspci says it is Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01). Dmesg detected it as a LifeView FlyVIDEO3000. I tried to configure it making the file at /etc/modprobe.d with the options card=2 tuner=5 (I found that also in dmesg). Still TvTime can't find any channels. I also tried using xawtv and scantv, but only managed to find two channels using ntsc somehow, but I have PAL BG/DK. (the card itself works on Windows, but it took me a while to configure the channels properly)
View 4 Replies View RelatedI'm running 10.04 64-bit with all stable and pre-release upgrades enabled in a Dell 4-core Inspiron with 8 GB of memory. I just bought a Hauppage WinTV-HVR 1600 and it's detected in the boot process and all firmware is loaded, but then it goes bonkers and spews
[ 24.421795] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-dig.fw
[ 24.612289] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 24.632510] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
[code]....
over and over again. All the info on the Hauppage site and LinuxTV is very obsolete. MythTV initializes, but can't find any channels on either the analog or digital streams.
I have a tv tuner card thats a couple years old, well since they are phasing out the old analog cable channels with digital ones, my card is not picking them up anymore. Is there any way to get the digital ones without buying a new card?
View 2 Replies View Related
