Debian Multimedia :: Avertv Super 009: Not Working?

Apr 5, 2011

I am running Debian Squeeze stable on a bare atom board. Only yesterday I installed an analog PCI TV tuner (AverTV Super 009). But I am unable to tune any TV/FM channel. Is it that the stock squeeze kernel doesn't have driver for this particular card? Or I'm missing some bits in configuration? Do I need to upgrade kernel (is any later kernel available in backports)? Here is some info that you may require:

[Code]...

View 4 Replies


ADVERTISEMENT

General :: Configuring AverTV Super 009 TV Tuner Card - 14

Mar 27, 2011

I have a TV Tuner Card (AverTV Super 009 from AverMedia). I am not able to work with it. My dmesg output is here. [URL]

It says my card number is 180 and tuner 1-42. I have tried all the 42 numbers in the tuner option in the modprobe command (modprobe saa7134 card=180 tuner=1 to modprobe saa7134 card=180 tuner=42). But result is not good. The file CARDLIST.saa7134 in kernel.org displays my device [URL]?

[Code].....

View 1 Replies View Related

Fedora Hardware :: Configuring AverTV Super 009 TV Tuner Card From Avermedia?

Mar 24, 2011

I have installed a new TV Tuner Card. AverTV Super 009 TV Tuner Card from Avermedia. I am using Fedora 14. How can I make the above card work for me? (I am not proficient in Linux.)

View 6 Replies View Related

Ubuntu Multimedia :: FM Radio With AverTV Hybrid Volar MAX Not Working?

Jan 13, 2010

I have an AverTV Hybrid Volar MAX.I really would like to get the FM radio tuner working with this on my laptop. When I do 'sudo fmscan' I get the following:ioctl VIDIOCGTUNER: Invalid argumentI have downloaded and installed the drivers from AverMedia's web page (TV is working).This is on a Compaq Laptop (Presario V5305WM) on a fresh install of Jaunty.

View 1 Replies View Related

Ubuntu Multimedia :: Get AverMedia AverTV Volar Go To Work?

Jan 29, 2011

Avermedia AverTV volar GO is a pure analog External USB TV tuner device. I recently purchased it and struggling to get it working on Ubuntu 10.10. Ubuntu detects the card , as we can see it from lsusb, but tvtime doesn't find any /dev/video0 device. Also there is no mention about the device in dmesg. I had mailed Avermedia enquiring Linux support. However , they replied that they donot have Linux driver for this model. Is there any way we can get this work on Ubuntu.??

[Code]...

View 4 Replies View Related

Ubuntu Multimedia :: Set Up Usb, Digital TV Tuner, An AVerTV Hybrid Volar HD (H830) , To Work With MythTV?

Aug 14, 2011

to set up my usb, digital TV Tuner, an AVerTV Hybrid Volar HD (H830) , to work with MythTV? I note that the 'MythTV backend set-up', only refers TV Tuner cards, not usb sticks. Nevertheless, the link above provides a 'Linux x86' driver for my computer � a .tar.gz file. The link also provides an accompanying text file that asserts 'This package is tested with MythTV against Ubuntu 10.04'. I've recently installed Ubuntu 11.04.The accompanying text gives its pre-requisites as a. support linux kernel 2.6.29 or later. b. make sure /lib/modules/`uname -r`/build exists c. make sure "dvb_frontend.h" exist in your Ubuntu. d. kernel modules dependency: videodev, video buf-core, v4l2-common.

For (b), my computer shows the following path /lib/modules/2.6.38-10-generic/build$ I'm note sure what (c) means with 'in your Ubuntu' Needless to say, its later instruction doesn't work Install driver to system sudo ./xxx_LinuxDrv_x86_vxxx-beta_Install.sh I'm told that this 'command not found'

View 1 Replies View Related

Ubuntu :: Buttons References - Use The <Super>ButtonX (<Super>Button1 For The Enabled Compiz Screenshot Plugin)?

Jun 5, 2011

how to use the <Super>ButtonX (<Super>Button1 for example for the enabled Compiz Screenshot plugin)? I also notice there is configurable buttons 1 throught 20 under the various options. At first I thought the ButtonX was a mouse button. Maybe it is with some anticipation of there being eventually being a possible 20 buttons on the mouse. I know the Super key is the Key with the Windows logo on it. But I don't know what to do to get the needed Super Key / Button combination. After having enabled Compiz's Screenshot plugin by its default, I don't get an image after hitting any of the Super key and mouse button combinations. I'm running Ubuntu 11.04.

View 2 Replies View Related

Fedora :: Super / Win Key Is Not Working

Oct 8, 2009

I just installed Fedora 11 on my PC and can't seem to get the Win key to work at all I tried putting entries in xmodmap, tried modifying xorg.conf, and also tried setting altwin:super_win in the config settings. But nothing seems to work. Somehow, my Win key seems to be working as Meta instead of Super. From emacs, if I press Win+x, it works like Meta+x.

View 14 Replies View Related

Ubuntu :: Can't Get Super Key Working In Compiz

Apr 28, 2011

I've just upgraded to 11.04 and I can't get Super Key working in Compiz, which should be binded to Left Win. It shows up as Multi_key when I enter a key combination. However, if I bind Caps Lock to Super Key it works when entering a key combination. I'm also using a Logitech MK520 keyboard.

View 9 Replies View Related

Ubuntu :: LG Super Multi Drive Not Working?

Nov 3, 2010

When I had Windows (XP x64 or 7 64-bits) installed on my computer, my LG super multi drive worked fine. But now, with Ubuntu 10.10 64-bits, this drive doesn't work. When I click on the physical button to eject the drive, nothing happens.

View 2 Replies View Related

Ubuntu :: Keys Tab / Caps / Shift / Ctrl / Alt / Super Stop Working.

Oct 16, 2010

I'm running Kubuntu 10.10, with KDE 4.5.2, what I've noticed is every so often my Tab, Caps, Shift, Ctrl, Alt, Super keys stop working. I'd been running Ubuntu 10.04 with Gnome and hadn't ever come across this issue. I'm not sure if this is related to KDE 4.5.2 or is possibly because I updated to 10.10 and would also occur on a Gnome environment.If I switch to my virtual machine (VMWare Workstation 7.1.2 build-301548 which I was able to get working on 10.10 using URL.... the keys work within that but if I switch back to my host desktop they stop working.To fix it I've found logging out or unplugging the keyboard and plugging it into a different USB port fixes it.

View 1 Replies View Related

Debian :: XKB - Super - Not A Modifier In Custom Layout

May 29, 2011

I've written my custom keyboard layout, where I'm trying to remap the Menu key as Super. The key gets remapped, however Super is not recognized as a modifier key, unlike with a standard layout I've used as a comparison. What puzzles me is that the left Windows key, which I never refer to in my custom layout stops working as well.

Here is the relevant section of my custom layout:

Output of xev command shows the key has been remapped correctly:

View 2 Replies View Related

Debian Configuration :: Cannot Get Ksh To Have Super Tab Completion Power

Oct 27, 2010

I cannot get ksh to have super tab completion power. Is it possible? I would like

apt-get in<tab>
and
apt-get install icewe<tab>
to auto complete

I am using lenny and ksh93

edit: Another problem. If I set ksh as /bin/sh I get errors during boot. Is it just me? Is it possible to set ksh as /bin/sh?

edit2: One more question. ksh does not seem to tab complete symlinks Is it just me? Any way to get it to recognize symlinks?

and my .kshrc
# Environment variables.
export PAGER=more

[code]....

View 5 Replies View Related

Debian :: Root / Super User Access On KDE Version

Mar 16, 2009

After a week of working with Debian, I decided to install the KDE3 version straight from an NetInstall CD. This fixed some issues for me as well as made networking and folder sharring a snap! But now its time to add all the extra packages I need.

Here's the problem: Using any kind of Package Manager yields the same results:
E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)
E: Unable to lock the administration directory (var/lib/dpkg/), in another process using it?
RESULT=100

I've tried apt-get from root command line and the KPackage Manager that comes with KDE3 with same results. I have only one user that was created during Debian install. I'm having some other problems, from what I've seen on the net, they all seem to point to not having proper Super User access (I'm guessing here). What could cause this error? AND/OR How do I make sure I have top level access to the configure the system? (I tried logging in as "root", but the login errored out saying that this was not allowed).

View 8 Replies View Related

Debian Installation :: Super Grub2 Will Work After Vista Reinstall

Mar 16, 2011

I have a dual boot system. I need dual boot as my dictation software is only available for Windows. In the future I am going to try a virtual machine, but dictation and audio did not work properly the last time I tried in VM. But unfortunately for now I have a dual boot machine with Vista and Debian 6. Unfortunately, I am going to have to reinstall Vista. Or to be more accurate I'm going to install the 64-bit version instead of the 32 bit that came with the computer. I have the 64-bit version that I no longer use from one of my other computers.

Anyway, I have to install Windows which will overwrite my grub2. Is there anyway I can make a backup or reinstall grub2 after I install Windows. I really don't want to reinstall Debian 6 squeeze. Can they make some sort of a backup of gurb2 before I do this. I checked out the Internet and I found something called Super Grub2. It apparently will allow me to boot back into Debain 6 so that I can install grub2 again. Assuming, Super Grub2 even works then how do I reinstall grub2 once a boot into Debian 6? Has anybody tried Super grub2, does it work? It's kind of hard to test it, with a working version of grub2.

View 3 Replies View Related

Debian Configuration :: Understanding Super Hybrid Engine Settings?

Sep 15, 2010

I've got an Atom-based EeePC1000 with 2.6.34-0.slh.11-sidux-686.The DebianEeePC wiki ( as the following information.As of kernel 2.6.30, the "Super Hybrid Engine" is supported: /sys/devices/platform/eeepc/cpufv contains a value which is 256× the number of available settings plus the current setting; you write a number n (0 ≤ n < number of available settings) to it to alter the setting.

View 2 Replies View Related

Debian Hardware :: HDA Intel Super Quiet With Newer Kernels?

May 27, 2011

I'm running kind of a mix between Wheezy and the occasional package from Sid. I've got the 2.6.32 kernel installed, as well as 2.6.38 and 2.6.39.

With the first kernel (2.6.32), my sound is normal, everything works fine. With the latter two, even using the same driver, my sound is quiet even with the volume up all the way, not to mention that somehow the available volume controls change along with this update. I was wondering if anyone else has experienced something similar, and if they managed to fix it or work around it without just booting into the older kernel?

View 2 Replies View Related

Debian Multimedia :: XF86Audio Multimedia Keys Not Working In Squeeze

Jun 23, 2011

I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.

When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).

Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.

So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.

I think this might be due to a missing package or configuration but I have no idea where to look...

View 1 Replies View Related

OpenSUSE Hardware :: Configure TV Card AverTV Digi Volar Ex?

Jan 29, 2010

I've a new HDTV card: Avermedia AverTv Digi Volar Ex( DBT-T, USB 2.0). Has any been able to use it with OpenSuse 11.2? Is there an easy way to configure it? I've tried with yast, but nothing.

View 8 Replies View Related

Debian Multimedia :: Error - It Is Perfectly Working With Debian Lenny

Apr 23, 2010

I installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.

View 1 Replies View Related

Debian Multimedia :: Right Ctrl Not Working / What To Do?

Mar 12, 2010

Right Ctrl has traditionally been the key used to un-grab the keyboard/mouse in VirtualBox. I've never had a problem with it before, but on my laptop it doesn't work. When I press the key, I get this xev output code...

So, I am pretty confident that the key itself is functional. However, it doesn't seem to do anything in applications. For example, keyboard shortcuts in Kate (such as Ctrl+a to select all) do not work with the right Ctrl key.

View 4 Replies View Related

Debian Multimedia :: How To Get Sonata And Mpd Working

Apr 19, 2010

I'm trying to get sonata and mpd working.My problems:1)mpd - I don't want to have to edit /etc/mpd.conf and specify that I am the only user that can use mpd, however, mpd complains if it is left as "mpd" for the user. Is mpd possible on multi-user systems??2)mpd again - I keep getting "connection refused" errors when trying to use mpc. It's trying to connect to localhost and port 6600, but mpd is refusing the connection.3)sonata - I managed to get mpd working once (but my configuration was a mess so I had to start over) and even with an mpd database in my home directory, sonata shows absolutely nothing in its library.I'm not sure what to do with it because its documentation is very sparse.

View 7 Replies View Related

Debian Multimedia :: X Stopped Working Over Ssh?

Mar 10, 2011

I have been running X applications over my ssh connection for a long time using the command ssh -Y servername.example.com -p 222 . About a week ago, I noticed that it no longer works. I also tried ssh -X servername.example.com -p 222 but again, no success.

View 8 Replies View Related

Debian Multimedia :: Splashy Not Working ?

Apr 8, 2011

I saw something like "depmod not found for the splashy to work" in the boot message. I enabled the boot log, but the message is still not recorded.

View 1 Replies View Related

Debian Multimedia :: Getting MCE Remote Working?

Jun 15, 2011

I have installed Debian 6.0 amd64. I have followed instructions all over the web, none of which worked. Tried apt-get, compiling from source found old instructions that don't work on new kernels, found bugs here and bugs there and now I have no hair left.My remote is an HP remote with a standard eHome receiver. It works fine in Ubuntu. Is there a modern, up-to-date, step-by-step guide for getting my remote to work so I can get back to using xbmc?

View 2 Replies View Related

Debian Multimedia :: CD ROM Drive Not Working Normally?

Jun 25, 2011

I just made a dist upgrade from Lenny to Squeeze.

CD Rom Drive is not working normally...when I access it in nautilus, the nautilus just disappear.

Though I could read the files in the CD inside (using the right side pane of nautilus)...ejecting the CD produces this error: "unable to eject cdrom0 failed to execute child process "eject" (Permission Denied)"

View 7 Replies View Related

Debian Multimedia :: Y Key Is Not Working In Gnome

Sep 5, 2011

Y keY is not working.I changed keYboards and its still the same. It works fine in ttY1 for example and shift Y works too. It works fine within things like openarena... But in gnome it does not. I checked binds and stuff, everYthing seems normal and i havent thouched anYthing related. It just does nothing when i press it alone.

View 1 Replies View Related

Debian :: Multimedia Keys Not Working After Upgrade

Jul 29, 2015

Today I did the following:

Code: Select allapt-get upgradeapt-get dist-upgrade

After a reboot the multimedia keys are not working anymore.

Also Code: Select allxev doesn't give any output when pressing the multimedia keys.

I've also checked the packages that were upgraded, but none seems (to me) to be changing anything in regard to key events.

Code: Select allStart-Date: 2015-07-29  09:17:10
Commandline: apt-get upgrade -V
Upgrade: libasan1:amd64 (4.9.3-2, 4.9.3-3), gdisk:amd64 (1.0.0-2, 1.0.0-3), cpp-4.9:amd64 (4.9.3-2, 4.9.3-3), libstdc++-4.9-dev:amd64 (4.9.3-2, 4.9.3-3), libpanel-applet0:amd64 (3.16.1-3, 3.16.1-4), python-debianbts:amd64 (1.12, 1.13),

[Code] ....

I'm on the Debian testing branch. Initially I used xfce, but am now using i3.

Why there are no events after the upgrade? Maybe I should downgrade some of the above packages?

View 2 Replies View Related

Debian Multimedia :: Flash Player Not Working

Dec 28, 2014

I installed Debian Wheezy on an external server. For my purpose I need to install a graphical interface with the following command

Code: Select allsudo apt-get install gnome-core xorg iceweaselNext I need to install xrdp to connect to the server via Remote Desktop Connection. Code: Select allsudo apt-get install xrdp

After that I installed Oracle Database 12c. It was a bigger effort to get the whole system going than initially supposed. As far as I can see it is working now. Finally to use Oracle Enterprise Manager in the Iceweasel Browser I also need to install the flash player. After modifying the sources.list I did that with the following command

Code: Select allsudo apt-get install flashplugin-nonfree.It installed successfully. Now I started the browser unfortunately it is not working perfectly. Typing in the URL of the Enterprise Manager I can see the site, but there is no text!!! (see the attached picture)

View 10 Replies View Related

Debian Multimedia :: KDE Lock Screen Not Working

Jul 11, 2015

Just upgraded to Jessie from Wheezy. The process went smoothly.

I've noticed the lock screen is inescapable. The "Unlock" button does nothing, the keyboard is completely disabled, and all I have is a clock to stare at for all of eternity until I force a reboot. It doesn't hang or freeze, I'm just unable to get out of the lock screen. I've tried configuring the widgets and stuff in the System Settings, but I can't make it usable.

It was working perfectly in Wheezy, and is a pretty important feature that I use all the time when other people are around and I need to leave my station.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved