OpenSUSE Hardware :: Wireless Device Crashes OS11.2 - Encore Electronics ENLWI-G2
Dec 19, 2009
i just installed a new wireless device from encore electronics(802.11g Wireless PCI Adapter ENLWI-G2) but it deadlocks openSUSE 11.2 when i start the networking module in YaST. It also deadlocks(Freezes up) when i tried reinstalling suse. can someone help me, has anyone got this device to work? I also tried Fedora 12... it manages to see my wlan and posts the mac address of the card.. but it also locks up while trying to use it or configure it
View 9 Replies
ADVERTISEMENT
Jan 29, 2011
I have an Encore Electronics 802.11g Wireless LAN Adapter installed on a secondary desktop. When I was running Windows XP the wireless signal was strong and did not disconnect. When I installed Ubuntu the wireless signal is weak and it will not stay connected. Would there be a driver for Ubuntu to work better?
View 1 Replies
View Related
Jan 15, 2010
After been convinced by an exchange student from Nashville I am hosting here in Germany I went into openSuse 11.2. I installed and got openSuse 11.2 to work. I must admit, that I was very impressed. It is more than 10 years that I tried a UNIX system and Linux was quite a cryptic thing. First some additional drivers had to be installed to get MP3 to play. However Internet access was possible with cable but the system failed in recognizing the WLAN.
Here is my system:
HP Compaq nc4000
OpenSuse 11.2 (i586)
KDE 4.3.1 "release 6"
Wireless Network
Atheros AR5212
I have looked through some posts but must admit, that I did not understand much of that. I Am willing to learn, however I do not see myself compiling some drivers. If you could tell me which URL could be used for dloading or installing via Yest, If more sophisticated solutions, than I will have to ask my student to do it for me, but he should learn German and learn more about German lifestile in German Bars.
View 1 Replies
View Related
Jan 2, 2009
Is there any possibilities to make Creative HS-1200 wireless headset to work in OS11.1?
It shows up in Mixer panel, but i cant in any way configure it or make it work. It seems its been detected in some way, but i Yast-Sound it doesnt show up. Only in KMix.
View 3 Replies
View Related
Jul 30, 2010
Im about to get some support from Novell using Bomgar. Bomgar support SUSE, Ubuntu, Redhat, Fedore, but i can't find anything about OpenSUSE.
Anyone know if Bomgar work on OS11.3 64bits?
View 1 Replies
View Related
Oct 21, 2010
At the moment 'make' returns this:
Code:
./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory
compilation terminated.
Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.
I would do a little more homework, but I already did a lot only to get stuck here, and I need to solve this sooner rather than later.
I have already: installed devel and desktop-devel and given up about 350mb of diskspace to
Code:
zypper in -t pattern devel_C_C++
Only to still not have the make function available.
If that install was unecessary, I'm hoping there's a simple uninstall version of that line.
Reading what it's saying, it sounds like I may have all the right kit but it needs a nudge in the direction of the kernel??
View 3 Replies
View Related
Dec 25, 2009
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
View 7 Replies
View Related
Feb 18, 2010
I recently upgraded my SuSE 11.2 to KDE4.4 from "download.opensuse.org/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/". Most things run fine, however the "Akonadi Control Center" does not appear in my KDE "System Settings". Akonadi itself seems to run, at least Contact uses it for the addresses.
I searched for all "akonadi" packages, but I didn't find ones which I do not have installed.
View 5 Replies
View Related
Jun 9, 2010
I am running OpenSuSE 11.2 64bit which was upgraded from 11.1. When I moved to OS 11.2, I found out the hard way about VMWare not working. Then tried to remove it and fix it myself.
When I try to run the config script...
Code:
parents:~ # vmware-config.pl
Unable to find the answer LIBDIR in the installer database
(/etc/vmware/locations). You may want to re-install VMware Server.
Execution aborted.
parents:~ #
When I try to install vmware-server
Code:
parents:~ # rpm -i VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to upgrade vmware-server
Code:
parents:~ # rpm -U VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to force install vmware-server
Code:
parents:~ # rpm --force VMware-server-2.0.2-203138.x86_64.rpm
rpm: only installation, upgrading, rmsource and rmspec may be forced
Other than rebuilding my box, how can I recover from this?
View 2 Replies
View Related
Aug 2, 2010
Has anyone succeeded in coercing either banshee or rhythmbox to play "restricted" media? On my 11.3 install, I have all the packages from the "one-click" install that takes 49 clicks to find on the new wiki structure ... Playback works correctly in mplayer, gnome-mplayer, and smplayer. VLC works also, ... yawn ....
This is the third consecutive release [COLOR="rgb(0, 0, 0)"](AT BEST)[/COLOR] where this stuff is badly broken! By badly broken, I mean that installing all the needed software and codecs does not appear to be the only requirement. I was able to get it working in 11.1 and 11.2, but only via a hit and miss series of un-install the packages, reinstall one by one ... making offerings of fatty sheep ... reinstalling again .... performing the second part of the ring cycle for the neighbours cat ... remove the codecs again .... install again ... wow ... it's working ... set the entire system to ro ... sing for the cat again!
Does anyone have any insight as to why gstreamer is SOOOOOOO foobared in OpenSUSE? Can anyone articulate a series of steps that will actually get the desired result? BTW, getting this stuff working in FC13 is trivial. Add the fusion repo and install the codecs! I remember a better day in SuSE land when one added the packman repo and installed the codecs ...
View 1 Replies
View Related
Nov 13, 2009
everytime i boot up I have to:
# vgscan
# mount -a
what is the command to get suse to automatically run vgscan at boot?
View 4 Replies
View Related
Feb 18, 2011
I created bootable USB stick in Ubuntu the hard way in console. When I am booting and when my status bar is half full with white color I get white screen, where is the problem please?
View 9 Replies
View Related
Apr 27, 2010
Are any of you using a USB wireless dongle that basically works Out of the Box, so to speak?
View 9 Replies
View Related
Sep 11, 2011
I accidentally powered down in the middle of a session by removing the wrong battery from my laptop (a Motion Computing tablet), and ever since that happened knetworkmanager crashes with a segmentation fault on startup. I have uninstalled it and then reinstalled it from an openSuse 11.4 DVD I made a few months ago, but it still crashes on startup. Ifup says it connects to the wifi (Wayport Access @ McDonalds) I have available, but browsers don't reach the internet while Ifup is connected, so I can't sign on and get access to anything more recent. Is there some file I ought to delete,or some other software I ought to delete and reinstall?
View 9 Replies
View Related
Feb 21, 2010
I used KDE3 with 11.0 with some KDE4 apps till I needed some applications from the KDE4 factory tree and mistakenly left the repository active. Next time the online update also updated most of the applications I would rather keep, and as a result the KDE3 disappeared from the KDM login choices. So I have two questions:1. how to enable users to select KDE3 at login (currently I have to select failsafe mode and run startkde manually)2. how to replay back an update I didn't want to have?
Perhaps a combination of the above: can I upgrade to OS11.2 and keep KDE3? (please don't tell me to switch to KDE4, I acknowledge and appreciate the effort and the improvements that KDE4 got, but it's still not a replacement for KDE3 - there are so many simple things which are impossible in the new version)
View 9 Replies
View Related
May 20, 2011
This problem started a few days ago. Whenever I attempt to connect to a wireless connection via network manager, my computer completely crashes, going to a black screen with no input from keyboard or mouse. It forces me to reboot using the power switch. Everything works fine when I connect to an ethernet cable, so I am sure it's a problem with my wireless driver.
I already tried (successfully) reinstalling the ath9k driver via compat wireless as was the advice from other forums, but this had no effect. I'm currently running opensuse 11.4, and haven't had this problem until a few days ago
This problem seems a bit ridiculous for a task as simple as connecting to a wireless network, so I'm convinced that either there is some sort of relatively simple way of fixing it, or windows really is the only decent operating system out there..
View 9 Replies
View Related
Nov 4, 2010
Toshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy.
Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.
Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.
View 3 Replies
View Related
Mar 11, 2011
On my Lenovo T410 (openSUSE 11.4 KDE - 64bit) I have mobile broadband. Gobi-loader is installed and working properly. However when I try to setup mobile broadband connection the KDE Control Module crashes. Tried many times also after reboots, though KDE Control Module keeps crashing.
View 6 Replies
View Related
May 20, 2011
I finally installed openSUSE along side ubuntu and xp in my ThinkPad EDGENow I am facing issue with toggling the wi-fi, I had no such problem in ubuntu.Seems like there is some issue in the thinkpad-acpi module.I use fn+F9 to toggle the wifi, which toggles both bluetooh and wifi, but on openSUSE it only toggles bluetooth.acpi_listen in ubuntu gives me the below result when I press fn+F9ibm/hotkey HKEY 00000080 00001005but in openSUSE its blank but bluetooth gets toggled. dmesg from ubuntu:
Code:
$ dmesg | grep acpi
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[code]...
View 5 Replies
View Related
Jun 20, 2011
I am trying to get a USB wireless device to work on my desktop computer running OpenSUSE 11.1.
Here is what I have gathered after working through the sticky on getting my wireless to work:
In Yast Hardware Info:
USB:
UDI: /org/freedesktop/Hal/devices/usb_device_bda_8189_00e04c000001_if0
Note in boot log:
Failed services in runlevel 5: network
When I go into Yast/Network Devices/Network Settings, I can add a setting for this device but if I quit out of Yast and go in again the setting is no longer listed. What should I do next?
View 3 Replies
View Related
Mar 1, 2010
I downloaded the latest stable release from the opensuse download site and when I try to install it, it fails. Basically, the installation reaches 50% and then I get a message : Failed copying image file to hard disk. The hard disk on my PC is 18GB and the installer suggests 10.7 GB for /home and 7.2 GB for /root. I read somewhere that /root needs to be allocated a min of 10 GB, but the installer does not let me change the size /root to more that 7.2 GB. how can I go about installing it?
View 9 Replies
View Related
Feb 23, 2016
I managed to get Debian up and running on my Encore 2 tablet. Wireless works on the 4.3 kernel, but the interface disappears when I wake the machine from suspend. There are no errors in dmesg, nothing related to wireless in syslog, and the brcmfmac driver is still in the kernel. Removing and reloading the module doesn't make the interface reappear. I'm not sure where to look for the problem.
View 0 Replies
View Related
Mar 1, 2010
I started this process about 1-2 years ago, and am finally getting back to it. I have:
AMD Sempron processor 3400+
1 GB memory
200 GB hard drive
Encore ENLTV-FM TV card (SAA7134)
[code]....
I get a good picture, but no sound. There is a short jumper cable running from the sound output of the TV card to the "line-in" on the sound card. I have messed with the settings in Gnome ALSA mixer, including what I think are the correct settings (Line-in:mute, record; Capture: Record, Master:100%, PCM 100%). I don't even get sound if I plug the speakers directly into the TV Card. I've tried different audio settings in the MythTV backend and frontend, but I really have no what the proper settings are.
View 3 Replies
View Related
Aug 4, 2010
well I am an absolute newbie.My wife has just got hold of an old dell latitude with only 256k RAM someone actually put xp home on it and of course nothing works.I have loaded ubuntu. The Encore 802.11g worked with xp on this machine How do I now get a linux driver and install this piece of hard ware?
View 3 Replies
View Related
Aug 24, 2010
I am attempting to install drivers for Encore ENUWI-N3. Each step in the READ ME leads me to countless forums and video tutorials, due to my lack of understanding. Here is the READ ME:
1. This driver supports RealTek RTL8169s/8110s Gigabit Ethernet driver for Linux kernel 2.4.x.
2. Installation steps: (1)Compiling r8169.c using 'Makefile'.
"make" <NOTE>Please remember to ASSIGN "NEW_INCLUDE_PATH" in Makefile according to linux kernel.
(2)Move r8169.o to the directory "/lib/modules/<kernel>/kernel/drivers/net".
[Code]...
View 7 Replies
View Related
Oct 22, 2010
Can anyone point me in the right direction ?
I'm looking for electrical cad software similar to AutoCAD Electrical or PCSchematic Automation. I need something to do WIRING diagrams as apposed to circuit schematics like Egal. Electrical not Electronic. I'm talking about power distribution, fuses, relays, PLCs, motors, solenoids, switches, buttons, and cables. I am not talking about transistors, capacitors, integrated circuits, and printed circuit boards. Sorry to put such a fine point on it, but there are a lot of PC board design tools out there that use the word "electrical" in their description, but are not useful for diagramming the wiring connections in a machine.
I think an electrical cad program should have the following features in order of importance code...
Here is an example of the sort of thing, but wiring diagrams can represent an entire factory, documents with hundreds of pages.
View 9 Replies
View Related
Jun 1, 2010
Although my webcam is identified. I cant get my webcam to work. gstreamer-properties complains - Video for Linux 2 (v4l2): Cannot identify device '/dev/video0' when testing. I have installed packages suggested by sticky.
View 1 Replies
View Related
Apr 20, 2011
just find this mini keyboard,and wondering whether it is interesting to use. I have ever think of getting a remote to control all electronics,but this keyboard can give a total control,Is it similar to remote?
View 1 Replies
View Related
Sep 14, 2009
I am trying to install verlog software for my electronics programming. I downloaded its tar.gz file and started installing it. everything was file till configure & make but while final installing using make install I got the following error as cannot create directory.
View 1 Replies
View Related
Nov 27, 2010
I'm trying to get my resolution to match the resolution I use in Windows 7 which is 1768 x 992 (50hz) Nvidia Geforce 210, LG Electronics 37LF75 - At the moment the top and bottom are both missing off the screen. Everytime I try to adjust my xorg.conf file it hangs at boot. Not really sure what exactly I'm doing with it.
xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
[Code]...
View 4 Replies
View Related
