I recently upgraded my SuSE 11.2 to KDE4.4 from "download.opensuse.org/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/". Most things run fine, however the "Akonadi Control Center" does not appear in my KDE "System Settings". Akonadi itself seems to run, at least Contact uses it for the addresses.
I searched for all "akonadi" packages, but I didn't find ones which I do not have installed.
After installation and deinstallation of XEN the main topic "Virtualization" is missing in the YAST control center.
Under "Software Management" I searched for "yast" but found no fitting module.
How can I reinstall?
Yesterday, after I first installed Slackware 13.1 I had no trouble replacing the default wallpaper with a simple gradient. Very easy. Today, (after re-formatting the drive and re-installing the entire system because I messed around with a script and it wouldn't boot) I can't change it. I spent about an hour messing around with menus and settings trying to figure out how I did it, and eventually, as a last resort, turned to the help file. It tells me to choose Configure Desktop from pop-up menu when right-click on the background.
But Configure Desktop doesn't appear in the pop-up menu. (At least, not anymore it doesn't.) The help file also says to use the Control Center, but I can't find any trace of that either. I haven't the slightest idea why these are missing. Since I re-installed everything onto a freshly re-formatted drive, anything I played around with before shouldn't have any effect on the new installation. The problem is there both when I login as root and user. I really don't want to try re-installing everything again.
The only changes I've made to the system since the re-install is to edit /etc/inittab to replace the 3 in id:3:initdefault: with a 4, so I get a graphical login, and to edit /etc/rc.d/rc.inet1 to place an & at the end of the dhcpcd request which, according to the instructions I was following should put it in the background to speed up boot-time slightly. I haven't (knowingly) played around with anything that should affect KDE, except changing settings from within the KDE menus. I know it's probably going to be something very simple, and possibly obvious in retrospect, but I'm new to Linux and have no idea what I'm doing here.
I start Kmail, Akonadi tries to start a server and it fails (I removed the first 5 tests that were correct because otherwise this post would be to long). This is the report it gives:
[code]...
What can I do to let it start correctly, or is there a way to disable Akonadi? It's very annoying that every time I start Kmail, Akonadi attempts to start.
I installed OpenSuse 11.4 Gnome on my Toshiba laptop. A couple of things i noticed while trying the live CD first is that the file manager recognized my NTFS partitions and after I installed I expected it to do the same. Also, while installing I thought I selected a secure logon with username & password. After installation it boots right into the desktop GUI. I haven't had a lot of time playing with OpenSuse yet and I have browsed through some threads and I couldn't find a way to configure a secure logon and do I have to mount the Windows partitions in the Command Line or is there a tool I can use in the control center?
View 7 Replies View RelatedAbout a week ago, I installed all the updates that popped up. I didn't actually look at what was being installed.
Since then, most of the items in the Yast2 Control centre won't run and just pop up an error box with the following (Firewall):
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_S_construct NULL not valid
YaST got signal 6 at YCP file /usr/share/YaST2/clients/firewall.ycp:20
/sbin/yast2: line 440: 19436 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Xlib: extension "RANDR" missing on display "::ffff:127.0.0.1:11.0".
[Code]....
This is the error message I got today when updating.
patch:yast2-control-center-4200.noarch conflicts with yast2-control-center-qt.i586 < 2.20.2-1.3.1 provided by yast2-control-center-qt-2.19.3-6.1.i586
Test 9 brings up this error:
Code:
Test 9: ERROR
--------
Akonadi control process not registered at D-Bus. Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup. How can I solve this?
F10 x86_64
akonadi-1.0.0-4.fc10.x86_64
mysql-5.0.67-2.fc10.x86_64
I am a newbie of KDE desktop. Where can I find the functions of control center of Gnome in KDE desktop? For example, the "Remote Desktop Preference"
View 6 Replies View RelatedI'm having trouble with Yast, I noticed today that I can't open the control centre from the desktop (along with install/remove software) when opening from the command line I get. the following output:
** (y2controlcenter-gnome:9050): WARNING **: error accessing /desktop/gnome/lockdown/disable_command_line [Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)]
Yast2 control centre opens, but none of the options load when selected. I have tried updating everything through Zypper which didn't work. (aka zypper ref/up etc). Then I tried removing yast and installing it again. When I did this (and downloaded the Yast control centre again the above errors, reappeared.
something odd I've noticed with 11.3 on my laptop--if I adjust my resolution through the Monitor applet in the Control Center or if I make changes to my Touchpad settings through the Control Center, the changes are lost when I log into my laptop. Do you think I botched an installation?
I've tried to determine what actual files are affected via the two applets with the thought that maybe I don't have the necessary permissions on them or that I can throw a bandaid on it with a start-up task to overwrite them. Alas, I've got nuthin'
When I try to adjust the mouse and keyboard parameters, changes aren't applied. I adjust them to were I want to, click on accept, but then when I look on the settings again, they are set to default again. This must be some kind of bug. I already updated using the LXDE repository.
View 9 Replies View RelatedFresh install of OpenSUSE 11.2 and I'm having issues with sound. Installed what I needed for various codecs (mp3, dvd etc etc). Sound now plays through applications yet when I go to Control Center and try to adjust the Sounds, I get a dialog box that says "Waiting for Sound System to Respond" and it just hangs there.
This is an old Shuttle box with Nvidia onboard everything. I've selected all pulse and alsa packages and did a reinstall on them to no avail.
Not sure how/when/why it happened the volume control app on my control panel is missing. I tried adding it by doing a "Add to Panel" but the volume control app says it is now deprecated.Is there any other way to change the volume quickly instead of having
to open pulseaudio volume control
Im about to get some support from Novell using Bomgar. Bomgar support SUSE, Ubuntu, Redhat, Fedore, but i can't find anything about OpenSUSE.
Anyone know if Bomgar work on OS11.3 64bits?
At the moment 'make' returns this:
Code:
./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory
compilation terminated.
Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.
I would do a little more homework, but I already did a lot only to get stuck here, and I need to solve this sooner rather than later.
I have already: installed devel and desktop-devel and given up about 350mb of diskspace to
Code:
zypper in -t pattern devel_C_C++
Only to still not have the make function available.
If that install was unecessary, I'm hoping there's a simple uninstall version of that line.
Reading what it's saying, it sounds like I may have all the right kit but it needs a nudge in the direction of the kernel??
Where is Gnome Control Center. I checked System, Preferences but it is not there
View 1 Replies View RelatedI tried adding sample programs to the Control Center by adding them to the Preferences/Administration menu, but that doesn't work. I'm using Lucid Lynx.
View 1 Replies View RelatedI know that you can have a nice control center if you have nvidia or ati drivers installed. Is there such a thing for intel graphics (Intel GMA or HD graphics)?
View 2 Replies View RelatedToday is my sort of third day with the OS and I'm still loving it. I've been able to get the hang of quite a few things in Maverick but there is one thing that I really need help with.Back in Win7, I had the very same situation and after a week of messing around I was able to get it working; it was sheer luck, but hey, who cares?
I'm running an ASUS M4A785-M motherboard with an integrated ATI 4200 video card and using a 32" Toshiba TV with HDMI video and sound, which Ubuntu was kind enough to download the proper drivers for all on its own; Win7 didn't. Problem is, the best resolution I can use is 1920x1080, but at that point some of the text looks just too small, so I use the 1776x1000 resolution instead. Still, the grand majority of websites don't fill the browser. I have to manually zoom in each time so they can look properly. I know that after a week of tinkering in Win7 I got it working just fine without the need to zoom in on pages. I can't remember for the life of me how I did it and I had accidentally formatted the entire HDD once and all those settings got lost.Lower resolutions make it worse too. On some of them, the actual computer window won't even fill the TV unless I change certain settings, and then it still looks horrible because everything gets stretched out sideways and gets squashed and even if the PC screen doesn't fill the whole tv, it overcasts itself in the middle; as if I was using a much smaller monitor and it was overcasting.
when running XFCE, changing the font in qtconfig fails to change fonts in KDE apps such as ktorrent and koffice. This is rather annoying because default KDE fonts are excessively large and blurry on my monitor. Is there any way to force KDE apps to obey qtconfig settings?
View 2 Replies View RelatedI am running OpenSuSE 11.2 64bit which was upgraded from 11.1. When I moved to OS 11.2, I found out the hard way about VMWare not working. Then tried to remove it and fix it myself.
When I try to run the config script...
Code:
parents:~ # vmware-config.pl
Unable to find the answer LIBDIR in the installer database
(/etc/vmware/locations). You may want to re-install VMware Server.
Execution aborted.
parents:~ #
When I try to install vmware-server
Code:
parents:~ # rpm -i VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to upgrade vmware-server
Code:
parents:~ # rpm -U VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to force install vmware-server
Code:
parents:~ # rpm --force VMware-server-2.0.2-203138.x86_64.rpm
rpm: only installation, upgrading, rmsource and rmspec may be forced
Other than rebuilding my box, how can I recover from this?
Has anyone succeeded in coercing either banshee or rhythmbox to play "restricted" media? On my 11.3 install, I have all the packages from the "one-click" install that takes 49 clicks to find on the new wiki structure ... Playback works correctly in mplayer, gnome-mplayer, and smplayer. VLC works also, ... yawn ....
This is the third consecutive release [COLOR="rgb(0, 0, 0)"](AT BEST)[/COLOR] where this stuff is badly broken! By badly broken, I mean that installing all the needed software and codecs does not appear to be the only requirement. I was able to get it working in 11.1 and 11.2, but only via a hit and miss series of un-install the packages, reinstall one by one ... making offerings of fatty sheep ... reinstalling again .... performing the second part of the ring cycle for the neighbours cat ... remove the codecs again .... install again ... wow ... it's working ... set the entire system to ro ... sing for the cat again!
Does anyone have any insight as to why gstreamer is SOOOOOOO foobared in OpenSUSE? Can anyone articulate a series of steps that will actually get the desired result? BTW, getting this stuff working in FC13 is trivial. Add the fusion repo and install the codecs! I remember a better day in SuSE land when one added the packman repo and installed the codecs ...
everytime i boot up I have to:
# vgscan
# mount -a
what is the command to get suse to automatically run vgscan at boot?
I created bootable USB stick in Ubuntu the hard way in console. When I am booting and when my status bar is half full with white color I get white screen, where is the problem please?
View 9 Replies View RelatedAfter been convinced by an exchange student from Nashville I am hosting here in Germany I went into openSuse 11.2. I installed and got openSuse 11.2 to work. I must admit, that I was very impressed. It is more than 10 years that I tried a UNIX system and Linux was quite a cryptic thing. First some additional drivers had to be installed to get MP3 to play. However Internet access was possible with cable but the system failed in recognizing the WLAN.
Here is my system:
HP Compaq nc4000
OpenSuse 11.2 (i586)
KDE 4.3.1 "release 6"
Wireless Network
Atheros AR5212
I have looked through some posts but must admit, that I did not understand much of that. I Am willing to learn, however I do not see myself compiling some drivers. If you could tell me which URL could be used for dloading or installing via Yest, If more sophisticated solutions, than I will have to ask my student to do it for me, but he should learn German and learn more about German lifestile in German Bars.
Where is Gnome Control Center. I checked System, Preferences but it is not there
View 2 Replies View RelatedI've got my ATI driver installed, now I am trying to configure it. I have a laptop plugged into a docking station with an external monitor. I would like to use the external monitor only
I run the admin ATI Catalyst control center (amdcccle) configuration GUI, set up my settings, just as stated above (i.e. laptop monitor off, external LCD on). Works great! Then I reboot... and I have to configure it all over again
I've tried editing the settings, and then running
Code:
Here are my specs:
Code:
Catalyst Control Center (CCC) is not saving the changes I make. I saw a couple of thread about this that had links to instructions on how to install CCC, but it still doesn't work for me.
I start CCC with 'sudo amdcccle' and the GUI appears. I can use it to make changes; however, it never saves them. After clicking OK, it instructs me to restart the system. After a reboot all the setting are back to the default.
I have installed CCC three different ways:
1) sudo aptitude install --without-recommends fglrx-amdcccle | tee fglrx-amdcccle.log
2) sudo envyng -t
3) sudo ./ati-driver-installer-10-2-x86.x86_64.run
In all cases, the fglrx driver works, and 'sudo amdcccle' brings up the GUI, but the changes are gone after a reboot.
Hmm, at the moment, when I click "Apply" and the "Do you want to keep these settings?" 15 second countdown box appears, no changes occur even temporarily.
I've tried doing a fresh install of 9.04, then upgraded to 9.10 (I have problems with the 9.10 command line installer not installing grub) among other things.
Looking at the AMD/ATI download pages, I can't tell if catalyst control center (which installs the drivers) is fully functional for Ubuntu 10.10.
Has anyone had success with this software?
I have integrated ATI Radeon 3200 HD graphics on my motherboard and can't get things working.