I have an Encore Electronics 802.11g Wireless LAN Adapter installed on a secondary desktop. When I was running Windows XP the wireless signal was strong and did not disconnect. When I installed Ubuntu the wireless signal is weak and it will not stay connected. Would there be a driver for Ubuntu to work better?
View 1 Replies
i just installed a new wireless device from encore electronics(802.11g Wireless PCI Adapter ENLWI-G2) but it deadlocks openSUSE 11.2 when i start the networking module in YaST. It also deadlocks(Freezes up) when i tried reinstalling suse. can someone help me, has anyone got this device to work? I also tried Fedora 12... it manages to see my wlan and posts the mac address of the card.. but it also locks up while trying to use it or configure it
View 9 Replies View RelatedI started this process about 1-2 years ago, and am finally getting back to it. I have:
AMD Sempron processor 3400+
1 GB memory
200 GB hard drive
Encore ENLTV-FM TV card (SAA7134)
[code]....
I get a good picture, but no sound. There is a short jumper cable running from the sound output of the TV card to the "line-in" on the sound card. I have messed with the settings in Gnome ALSA mixer, including what I think are the correct settings (Line-in:mute, record; Capture: Record, Master:100%, PCM 100%). I don't even get sound if I plug the speakers directly into the TV Card. I've tried different audio settings in the MythTV backend and frontend, but I really have no what the proper settings are.
well I am an absolute newbie.My wife has just got hold of an old dell latitude with only 256k RAM someone actually put xp home on it and of course nothing works.I have loaded ubuntu. The Encore 802.11g worked with xp on this machine How do I now get a linux driver and install this piece of hard ware?
View 3 Replies View RelatedCan anyone point me in the right direction ?
I'm looking for electrical cad software similar to AutoCAD Electrical or PCSchematic Automation. I need something to do WIRING diagrams as apposed to circuit schematics like Egal. Electrical not Electronic. I'm talking about power distribution, fuses, relays, PLCs, motors, solenoids, switches, buttons, and cables. I am not talking about transistors, capacitors, integrated circuits, and printed circuit boards. Sorry to put such a fine point on it, but there are a lot of PC board design tools out there that use the word "electrical" in their description, but are not useful for diagramming the wiring connections in a machine.
I think an electrical cad program should have the following features in order of importance code...
Here is an example of the sort of thing, but wiring diagrams can represent an entire factory, documents with hundreds of pages.
I managed to get Debian up and running on my Encore 2 tablet. Wireless works on the 4.3 kernel, but the interface disappears when I wake the machine from suspend. There are no errors in dmesg, nothing related to wireless in syslog, and the brcmfmac driver is still in the kernel. Removing and reloading the module doesn't make the interface reappear. I'm not sure where to look for the problem.
View 0 Replies View RelatedI am attempting to install drivers for Encore ENUWI-N3. Each step in the READ ME leads me to countless forums and video tutorials, due to my lack of understanding. Here is the READ ME:
1. This driver supports RealTek RTL8169s/8110s Gigabit Ethernet driver for Linux kernel 2.4.x.
2. Installation steps: (1)Compiling r8169.c using 'Makefile'.
"make" <NOTE>Please remember to ASSIGN "NEW_INCLUDE_PATH" in Makefile according to linux kernel.
(2)Move r8169.o to the directory "/lib/modules/<kernel>/kernel/drivers/net".
[Code]...
Although my webcam is identified. I cant get my webcam to work. gstreamer-properties complains - Video for Linux 2 (v4l2): Cannot identify device '/dev/video0' when testing. I have installed packages suggested by sticky.
View 1 Replies View RelatedI'm trying to get my resolution to match the resolution I use in Windows 7 which is 1768 x 992 (50hz) Nvidia Geforce 210, LG Electronics 37LF75 - At the moment the top and bottom are both missing off the screen. Everytime I try to adjust my xorg.conf file it hangs at boot. Not really sure what exactly I'm doing with it.
xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
[Code]...
just find this mini keyboard,and wondering whether it is interesting to use. I have ever think of getting a remote to control all electronics,but this keyboard can give a total control,Is it similar to remote?
View 1 Replies View RelatedI am trying to install verlog software for my electronics programming. I downloaded its tar.gz file and started installing it. everything was file till configure & make but while final installing using make install I got the following error as cannot create directory.
View 1 Replies View RelatedA friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies View RelatedI want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
View 9 Replies View RelatedI recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
I am having trouble with my home network, from one computer to another both using wireless g (Ubuntu 10.04) what transfer rate should I expect/hope for when copying a file from one computer to another? My speed is consistently 220 KBps am I correct in assuming this is pretty bad?
View 1 Replies View RelatedI am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
As promised the finished (pretty much finished) wireless script can be downloaded here the wireless_script is a diagnostic tool for wireless issues. It will return all relevant information to help diagnose a wireless connectivity problem, return connectivity stats and attempt to fix common problems such as blocks. It comes in cli - wireless_script_1.2.sh or gui - wireless_script_zenity_1.2.sh'
Let me know any issues you have with it. My contact details are in the readme.txt (also the wireless results.txt generated by running the script includes code tags for forums - so please copy and paste the whole document when pasting on forums to enable this function)
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedThe problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View Relatedone of these "WiFi works in Gnome, not in KDE" threads, but I have been all over google and hundreds of threads across different sites and can't figure this one out.As mentioned, wireless is peachy in Gnome, unfortunately I like KDE and I'm more productive using it (when I have internet). Wired network works fine in KDE, and my network card
Code:
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Subsystem: Intel Corporation Device 1201
[code]....
I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
have a dell Inspiron 1501 with ubuntu 10.0.4 I want to rename my wireless card from eth1 to wlan0 as I use conkyrc and it will not read my wireless strength or my ssid cuz it thinks it's a ethernet card and not wireless card. I know this for a fact because peppermint os my wireless card was wlan0 and it worked just fine.
View 1 Replies View Relatedi installed ubuntu along side of xp, and i cannot get my wireless to work. the drivers that are installed in xp work great, and i can access the internet, but do not work in ubuntu.
View 3 Replies View RelatedI have a Dell Studio 1558 with a Broadcom wireless adapter. It's a brilliant piece of hardware and love everything about it except some of it's overheating problems. When I first bought it with Windows 7 pre-installed, it had an application installed on it called PeerNet, which creates a wireless network for other computers (and wifi-enabled phones) to connect to it. Simultaneously, you could also share your internet connection with these users. The internet connection could be either wired or wireless.
My question is, how do I go about finding the same functionality on Ubuntu since I know my hardware is capable of it. (I believe in Windows 7, it creates a virtual adapter that it uses) I know there are ways to share a WIRED internet connections with some help with the terminal, but I haven't found a way to share a WIRELESS internet connection. The network manager allows you to create a wireless network but I'm unable to connect to another wireless network at the same time.
The reason I mentioned mobile phones is because my mobile (Android 2.2) is unable to find a wireless network created by the network manager, but another laptop is (without internet access that is). I've noticed that mobile devices and iPod's aren't able to find ad-hoc networks on Windows PCs as well.
I hope someone out there will be able to find a solution for me (and surely others as well!) Maybe the final release of 11.04 will help out later if nothing turns up now.
For some reason, i just cannot get my wireless to work in xubuntu. When i click on the network-manager applet, it only has the wired network tab and VPN connections, there are NO wireless networks displayed. I have also tried iwconfig, which returned
lo no wireless extensions.
eth0 no wireless extensions.
and lspci:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
[Code]...
