CentOS 5 Hardware :: Install NVidia Drivers To Use Dual Monitor
Jun 7, 2010
I am trying to install nVidia drivers on CentOS 5.4 and it is requiring kernel-source
# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
For the installation of kernel source, I have followed the steps on [URL]. I followed the steps under 2.1 and they worked for me. Now what can be done for the installation of the kernel-source package. When I am trying to install nVidia drivers, I am getting error, following are lines from installation log of Driver.
-> Tagging shared libraries with chcon -t textrel_shlib_t.
-> License accepted.
-> Installing NVIDIA driver version 185.18.31.
-> No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site; this means that the installer will need to compile a kernel interface for your kernel.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
ERROR: Unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL]. I want to install driver.
# rpm -q kernel-
kernel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-devel
kernel-devel-2.6.18-92.el5
kernel-devel-2.6.18-164.15.1.el5.centos.plus
kernel-devel-2.6.18-194.3.1.el5
kernel-devel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-source
package kernel-source is not installed
The nVidia Driver I am installing is:
NVIDIA-Linux-x86-185.18.31-pkg1.run
# uname -a
Linux harvey 2.6.18-194.3.1.el5PAE #1 SMP Thu May 13 13:48:44 EDT 2010 i686 i686 i386 GNU/Linux
Only reason to install the proper driver is to use dual monitor.
View 6 Replies
ADVERTISEMENT
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Jan 1, 2010
I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
View 8 Replies
View Related
Nov 24, 2010
I have repeatedly installed CentOS 5.5 64-bit on a Dell T3500 with an nVidia Quadro FX 580, in an attempt to get dual monitor support to work to no avail. Everything works fine when just one monitor is plugged in and I do not try to enable or plug in a second monitor. I have installed the Dell DKMS, and the Dell recommended drivers (from Dell site) on one installation, I installed the nVidia drivers (from nVidia site) on another, and have tried with what CentOS loads by default on another. The results are the same every time: When I reboot as directed I get a black screen. I can recover by hard shutdown and unplugging one of the monitors, but that doesn't solve my problem. Has anyone had a similar experience, or have any helpful guidance? I am not very Linux savvy. This is for multiple machines in a corporate environment.
Information for general problems.
== BEGIN uname -rmi ==
2.6.18-194.26.1.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
[Code]...
View 3 Replies
View Related
Jul 24, 2011
I have installed openSUSE with Gnome3.
I had to install the nVidia proprietary drives so the OS would boot into Gnome3 and not fail safe mode. Without the proprietary drivers installed the display settings said:
Driver: software rasterizer in use
After installing the nVidia drivers Gnome3 works in one monitor, but I would like to be able to use my other two monitors (totaling three with two video cards.)
When I run nvidia-settings to generate an xorg.conf file it hangs, so I used nvidia-xorgconf to generate the xorg file and then used nvidia-settings to configure my extra screens.
This fails with a permissions error, running sudo nvidia-settings fails with the following error:
ERROR:
So, I ran nvidia-settings, saved the settings file to my /home/$USER dir, then copied xorg.conf to /etc/X11/
Logging out and logging back into Gnome fails with the error:
This problem extends to Ubuntu running Gnome3, so my thinking is:
a) Imma id10t and something in my xorg.conf file is wrong,
b) there is an issue with Gnome3/nVidia/Multiple displays.
I would really like to use Gnome3, it works on multiple other machines (ironically all ATI devices) just not the machine I use all day long...
Here is my xorg.conf file as generated by nvidia-settings.
Code:
View 6 Replies
View Related
Sep 1, 2011
When ever I install the (recommended) drivers through the "Additional Drivers" interface to run Unity my dual monitor setup does not work. The monitors won't even detect correctly what so ever. Then, when ever I install (more basic?) nVidia drivers through the packet manager, my dual monitors work as planned, but now Unity won't work. What's the deal? Are there any work arounds for this?
View 4 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jul 28, 2009
So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
View 5 Replies
View Related
Jul 15, 2009
I have installed:
yum list installed kernel*
Loaded plugins: fastestmirror, kernel-module, kmod, priorities Installed Packages
kernel.i686 2.6.18-92.1.18.el5 installed
kernel.i686 2.6.18-92.1.22.el5 installed
kernel.i686 2.6.18-128.1.6.el5 installed
[code]....
View 10 Replies
View Related
May 8, 2010
I've managed to get dual monitor support working, but it seems a little sub-standard.
- I can't find how to alter the relative y offsets of each screen
- I can't drag windows from one side to the other
View 3 Replies
View Related
Mar 10, 2010
i have a viewsonic VA712b monitor that used to get 1280x1024 resolution on my dell optiplex gx260 that had the intel video card.i upgraded my motherboard cpu and memory..the nvidia 6100 that is onboard seems like it would be an improvement to my old onboard intel but the best resolution i can get is 1024x768
i installed the nvidia 185 drivers and it's not recognizing my monitor as a flat panel lcd but as a crt, also it won't set the correct refreshrate - either 60 or 75.. it's set at 50... since xorg 7.4 no longer uses a xorg.conf file.. i'm not sure how to go about manually adjusting the settings to ones that will actually work. i mean other than buying a separate graphics car (URL)
View 1 Replies
View Related
May 25, 2011
I have recently installed FC15 on my system. Dual monitor support seems to be broken with my setup. I am using the latest NVIDIA binary blob driver (270.41.19). I compiled my own kernel for it, version 2.6.39.
When gnome3 starts it almost manages to boot up, but then it crashes and gives me the option of logging out. I have my system booting into target 'multi-user.target' since I was doing some other stuff and I use `startx' to start gnome3. I tried running having X use xinerama and not use xinerama, both cause gnome3 to crash, albeit in different ways. Other than that I am running a stock install as far as I know.
If there are some logs I should be looking at for gnome3.
View 4 Replies
View Related
Jan 26, 2010
I have a dual head setup with NVidia drivers. Is it possible to run gnome - screensaver (or xscreensaver) only in one head / monitor?
View 1 Replies
View Related
May 5, 2011
How can i be able to enable dynamically my second monitor and use Unity at the same time?Summary system:HP Compaq 8710p laptop, Nvidia Quadra 320M, Natty 64bit, with attached 2nd 19" monitorDescription steps taken this far:By default ubuntu ships with the following xorg.conf conform the new minimalist trend:
Code:
Section "Device"
Identifier "Default Device"
Option "NoLogo" "True"
EndSection
I use the nvidia-current binary drivers. In this configuration:Unity works Xrandr sees 1 screen (so no configuration of second screen possible)Standard monitor configuration tool in Ubuntu shows 1 screen With [URL]
Code:
disper -d auto -e
my second monitor comes alive. My laptopscreen becomes dark (with moving mouse cursor). Unity / Ubuntu classic (no effects) go into scrambled mode. Mouse is moving, objects are
[code]...
View 9 Replies
View Related
Mar 9, 2010
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
How can I fix the display settings?
View 6 Replies
View Related
Feb 18, 2010
I wanted to know how to save the dual monitor using Nvidia X server Manager. I googled how to and it said to delete the "xorg.conf" However I dont have the Permission to delete this file so I would also need to know how to gain full admin access to my Ubuntu Account.
View 4 Replies
View Related
Jun 22, 2010
I've just installed Ubuntu on my laptop. My laptop has an nVidia card so I'm forced to use the nVidia configuration tools. What I'd like to happen is for it to automatically start using my monitors if they're detected. OR, make a simple script that will enable the monitors without needing to restart X.
View 1 Replies
View Related
Mar 7, 2010
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
View 16 Replies
View Related
Mar 15, 2011
I have openSUSE 11.4 with standard KDE and two screens attached.Here's the question: How do I configure dual monitors when using the proprietary nVidia drivers?The openSUSE 11.4 installation put in the "nouveau" drivers for my nVidia card and I was able to configure dual monitors using KDE's Configure Desktop --> Display & Monitors GUI configurator. I could also set up dual monitors using a script based on xrandr (e.g. "xrandr --output VGA-1 --auto --pos 0x0 --output DVI-I-1 --auto --pos 1920x0")My screens are detected as VGA-1 and DVI-I-1 by the nouveau drivers.
OK, today I switched to the proprietary nVidia drivers. Only one of the screens is now detected and displayed in the KDE monitor configurator and that's marked as "default" rather than as a VGA or DVI connection.When I run xrandr to configure monitors, I get error messages if I refer to VGA or DVI hardware.
More info -- RPMs
nvidia-gfxG02-kmp-desktop-260.19.36_k2.6.37.1_1.2-23.1.x86_64
x11-video-nvidiaG02-260.19.36-24.1.x86_64
[code]....
View 7 Replies
View Related
Feb 25, 2010
I need a seperate workspace on each monitor and I use nvidia propriatary graphics drivers (I have a Geforce 9500 GT Graphics Card. It has one dvi port and one vga using both for my monitors.) The only problem is whenever I try to save the settings I apply something like twinview or the seperate x workspaces with the second monitor enabled It applys it but this is what happens in sequence (It may be only twinview that does this but i'm not sure not at my home computer right now):
1.) Picture cuts out to a blank screen on main monitor
2.) Pictures turns on in the second monitor (Its a seperate workspace from the main monitor)
3.) 3 to 5 seconds later the picute cuts out to the second monitor
4.) I'm left with two blank screen monitors and no way to turn the GUI back on other than a complete restart of the computer.
I need help on both of these issues. If it helps any one monitor is a CRT (The one on the right) and the one on the left is an LCD (The LCD is the main one). I also have Ubuntu 9.10 32 bit Karmic Koala if that helps. Lastly I have the latest propriatary graphics driver from nvidia (185 I think.) I also installed the driver from nvidia via Jockey (I think thats the name of the default driver installer for ubuntu..?) That is my situation and as you can tell its a pretty complicated one.
View 1 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Nov 26, 2009
I used preupgrade to upgrade from F11 to F12. In F11, I used the proprietary nVidia drivers from rpmfusion, and they worked well. I have refrained from installing the nVidia drivers in F12, because of the problems reported for users of KDE. I removed my old xorg.conf, which has references to the nVidia driver and to "TwinView," the proprietary method of managing two screens, so as to let X discover both monitors.
Now, however, my second monitor stays black, even though xrandr and KDE RandR show both monitors correctly. Xorg.0.log shows the nouveau driver is loaded. (I also tried to create a new xorg.conf following guidelines from the web, but many of the guidelines are from before xrandr, and I'm not confident I have it right yet.) It seems that X believes I have two monitors, because I can drag a window off into the blackness (and it's never heard from again!) I know that the hardware is working, because I just booted into Windows 7, and I could see the desktop on both windows.
How do I convince X and KDE to display on both monitors?
View 2 Replies
View Related
Mar 4, 2011
I run opensuse 11.3/kde desktop.
- updated to KDE:Factory
- X11 repository (V1.9.3)
- proprietary nvidia drivers (260.19.36)
Video card is a Quadro NVS 290. A dual head configuration using twinview is run.
The desktop becomes slow almost immediately (couple of seconds) after logging in (all applications). Turning off desktop effects does not make a difference as well as trying the various recipes on the internet regarding x.org conf-files.
The only action restoring responsiveness is to simply start nvidia-settings. Putting the following pseudo-action into a script-file and mapping it to a key allows to have a workable environment:
nvidia-settings -a PixmapCache=0 && nvidia-settings -a PixmapCache=1
It is very annoying having to press a key every minute or so. Instead of creating a cronjob I would like to solve this issue. This behavior has been consistent across kde/x-org/nvidia/kernel updates for many month now.
View 6 Replies
View Related
Jun 21, 2011
I have an NVIDIA 9800 GTX. I have 2 DELL monitors connect to this card, one is a 24" and the other is 21".
I am unable to use Xinerama mode with Unity, because for some reason after logging in, I get no desktop interface, only background wallpaper, and I have to force reboot.
How can I setup dual monitors in Ubuntu using Unity properly? Note that I do NOT want to use TwinView, since this results in dead space around the smaller monitor.
View 7 Replies
View Related
Feb 25, 2010
I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.
View 2 Replies
View Related
Feb 7, 2010
I have an Acer 1200X with an Nvidia 8200 graphics GPU integrated on the motherboard. I have an HDMI and VGA output. I have downloaded the Nvidia graphics driver using envyNG and the old fashioned way. I have tried configuring the monitors 15 ways from Sunday in the configuration and I cannot for the life of me get dual monitors to work.
When I go into configuration with the Nvidia wizzard it blanks like its going to work then just stays black with the mouse cursor. I also cannot save as I get a "parsing" error. I am using Ubuntu 9.10 and have even tried using envyNG to get the monitors to work on twinview... NOTHING Hope someone can help!
My dad who is a Linux nut came over to help and he left 3 hours later because were tempted to chuck the computer out the window...I need to figure this out as this is going to be my work computer and I need dual screens.
View 1 Replies
View Related
Jan 12, 2011
I have the nVidia GeForce 8500 GT 512MB graphics card, I put it in my system to get a speed boost and for a dual monitor setup, I don't have the proprietary drivers installed I tried installing them, and when I did it asked for reboot, so I did, and when it came back up only one monitor was in use, and it was running very very sluggish, so I opened up the Monitors from the settings and it said to use nVidia's thing, so when I did, I enabled the second monitor, and hit apply, and it asked for a restart of Xorg, doing that came back telling me that no monitors were find, and a reboot brings me straight to tty1... I tried both the recent version and the older one, both did the same thing, I really wanna get my Compiz effects back. is there a way to get this working? I will do anything you ask if it solves the problem...
View 2 Replies
View Related
Dec 12, 2010
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies
View Related
Sep 21, 2009
I'm trying to get the NVIDIA drivers to work with xen but i still get it bombing out although I export IGNORE_XEN_PRESENCE=1. the error relates to some variables in nv.c nor being declared. I compiling against 2.6.18-164.el5xen with the NVIDIA-Linux-x86-185.18.36-pkg1.run driver.
View 2 Replies
View Related
May 3, 2010
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies
View Related
