OpenSUSE Hardware :: Settings For Laptop Monitor With External VGA Display - 11.3-Gnome?
Mar 8, 2011
I'd like to solve a little problem that I have connecting my notebook with an external VGA monitor.Everything seems to work fine, but when I close the laptop monitor, also the external monitor shuts down.I've tried to find different energy-saving setting for laptop display and external monitor. with no luck...My video card is an ATI Radeon Xpress 200M. On the ATI website there is no catalist control center for linux. (It would be very useful). So, for now, I can only use the display options on the panel.
I am looking for a way to switch quickly and easily between my Laptop Display and my External Monitor, in Windows I had it configured so that when I plugged my Monitor in it would switch to that and when I removed it it would switch back to Laptop Display. From what I have tried it looks like this isn't possible with Linux, but I would like to get to the stage when I can click an icon to switch (or 1 to go to External and 1 to go to Laptop) My Laptop has an ATI Mobility Radeon HD 4500 Series Graphics Card and I have so far noticed the following issues.
1. If I use the Gnome Monitors instead of ATI Catalist Control Centre it seams to cause some strange issues include confusing Linux on what the max screen res supported by my External Monitor is.
2. When I try and enable/Disable either Display or change Resolution, I am told that I have to reboot before the changes take affect.
I don't know if it sounds weird but I've been trying for weeks with no result. I want to plug my external monitor through my laptop's vga plug, close the lid and work on my monitor instead of the laptop's monitor. I looked through the gnome power management settings and when the laptop lid is closed it can only suspend, blank screen, hibernate or shutdown. I can plug my monitor and I have clone displays and it works fine but I can' find a way to shutdown the laptop screen without shutting down the vga outlet. Its a brand new Acer aspire 5734Z with a 15,6 inches screen (wich is why I want to plug in my 19 inches monitor and work on bigger screen)
I am using ATI HD3200 graphics card, and running Ubuntu 10.04 Lucid on a laptop. It have VGA port so I can attach external LCD monitor to the laptop. I am using fglrx driver.
My question is how should I configure the xorg.conf file so that when I attached external monitor, the GNOME menu bar (Applications, Places and System, etc) will be put on the external monitor instead of laptop LCD monitor.
I have checked varies web resource that saying you can drag and drop the GNOME menu bar to the new screen, it never worked. Someone also suggested to add new bar into the screen and GNOME will remember it, I can't even find the option to do that.
I've just installed OpenSUSE 11.2 on a new machine. Because I was still using another machine as my main box while building the new one, the monitor attached when it was installed has a resolution of 1280x1024 @ 77Hz. I've now moved it to be my main machine and the monitor is a widescreen 1680x1050 @ 60Hz model. When I boot it normally the screen fails to come up - even GDM doesn't show. If I boot in failsafe mode the system comes up fine, but in 1280x1024 mode. The 'Configure display settings' icon shows the monitor as 'Unknown'. Couple of things I tried:
1) Switched to runlevel 2 and logged in as root. Ran Xorg -configure and looked at the xorg.conf.new that was installed, but it just had generic info for the monitor:
[code]....
2) While still in runlevel 2 and logged in as root I did a startx. This brought up the X display in 1680x1050 ok, and clicking on the 'Configure display settings' icon showed it had correctly identified my monitor and had set the size and frequency correctly.
3) Given the results of (2), I then tried logging in as myself in runlevel 2, did startx again, but this time the display failed to come up again.
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again. When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
I am trying to view my pc on my new flat screen but am unsure of the settings. I am using ubuntu 10.10. I have been trying (and on ocassion succesfully, but never really understood what I have done) to view my pc through the monitor option under preferences. Selecting the different monitor size but always find my external monitor (ie TV) is to the left, right above or under the screen I see on my PC. Also I am unable to hear my PC through the TV. I should say this is a good quality flat screen and all I am unsure of are the correct settings to use my TV as an external monitor.
I have an external monitor at work, but not at home. I take my laptop home and when I come back the settings are off. My monitor is above my laptop, so I have to rearrage displays and save every time its plugged in. Isn't there a system file or something somewhere that I can write to and save the current state as the default?
Whenever I change my Display and Monitor settings. The settings keep getting reset every time I restart KDE. The changes work fine and as expected, they just keep getting wiped every time for some reason.Here is what the settings look like after each restart:And here is what I'm trying to modify them t
I have never used Linux always windows so heres the problem the display only has 2 settings 640x480 and a smaller one and it say unknown monitor. I installed the drivers in hardware driver in systems I'm running Ubuntu v 9.10 if that matters and the video card is a Nvida mx440.
I recently installed Kubuntu 9.04 + Nvidia driver 180.44 on my Dell Latitude E6400 (1440x900) with NVIDIA Quadro NVS 160M. I have the G2410 1920x1080 external monitor. The monitor is connected via VGA. I am very pleased to have the monitor running at full resolution. However, the settings don't stay intact after rebooting.
If I have the monitor connected and turn on the the laptop, only the laptop screen is active. Then, I press Fn + F8 twice to switch to the external monitor which is always reset to 1440x900. After logging in I open Nvidia settings and switch the external monitor resolution to auto. There is a warning about Meta modes and I do auto fix. Then compositing is disabled, so I open system settings, turn off then turn back on desktop effect. Also, if I want to switch back to the laptop display, it stays stuck at 1920x1080 on the laptop.
Is there any way to set this up so it is automatically detected when the external monitor is plugged in and runs at the correct resolution? With my old M1330 and Intel X3100 graphics card, it would do this and was very convenient switching back and forth between the laptop display and external monitor.
I run Ubuntu on a MacBook Pro with an external monitor connected. But currently the external monitor only works with one user account. The External gets no signal and the laptop display is used on the login page. Is there any way of having the login page and possibly startup displayed on the external at all times for all accounts.
System > preferences > Display Doesn't work for me, I use NVIDIA X Server Settings
I'm trying to get my secondary display (DVI-Out) working on a laptop (built-in monitor & external display) and I'm afraid I made quite the mess of it installing the proprietary driver only to learn that my old ATI card is no longer supported and having to clean that up and reinstall the original distro driver!Anyways, I reverted back to the open source driver and all is ok. That is until I reboot. If I reboot with the DVI display connected then both displays are brought up in 640x480 res and look terrible.
What do I have to do to be able to leave my DVI display connected when I start up the machine and get it to render the way it does when I plug in the display after the machine is running?I suspect I need to create an xorg.conf file but these fancy modern Linuxes these days don't come with one (or maybe they no longer need it anymore).
I have slackware 13.1 installed on my laptop and use kde.I just bought a new external monitor 1680 X 1050. The laptop's monitor is 1280 X 800. From KDE i configured laptop's screen to be inactive and the external monitor at resolution 1680 X 1050. When i boot and enter KDE both monitors are activated, ican't understand their resolution. Then, just when i enter system configuration-monitor-monitor configuration the laptop's monitor automaticly turns off. Then i configure the external to 1680 X 1050 resolution. This happens every time i have to enter slackware. How to setup my xorg.conf file. You can see it below:
I want to be able to change the settings for my top down dual head display. Basically one monitor sits on top of another right now. How it was setup before was that they used to sit right next to each other so when you mouse over to the right it would go to the new screen. The problem is now when one sits on top of the other I want to be able to just mouse up instead of mousing over to the right. I don't want to use the gui to be able to do this. I want to find out what config file and specifically what setting in the config file would allow me to change this.
I believe I'm right in thinking the type of graphics card I have is relevant somehow to this, so after some googling I think I worked out mine is Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller.
I searched the forums for a long time and could not found any relevant informationI am new to ubuntu (10.10 64bit) and I just want to know if it is possible, like it is in win7 (sorry!), if I can plug in my hdmi cord and have the laptop speakers and display disable, and have the external display and its spears enabled.
The laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
I have been using Ubuntu for a while now on my netbook, however I have an older HP dv5 laptop that hasn't been used in a couple of years that I would like to format and install a linux distro on. Problem is that it has a very broken LCD screen and I had been previously using an external monitor with it. I had tried to install Ubuntu 9.04 on it at one point but could not progress very far into the installation due to the external monitor. I had also tried using the non-graphical installer but had little success with it as well.
I had thought of removing the HDD from the laptop and putting it into another of my laptops and installing it that way, but the specs are different between the two laptops and I figured that it would not work properly once the HDD was switched back to the older laptop. Is there any way to use an external monitor to install a newer version of Ubuntu? or perhaps is there another distro that is easily installed using an external monitor? My plan is to eventually remove the broken screen all together and only have the external monitor connected, the broken screen is a bit unsightly.
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
I connected an external 22" monitor to my new linux netbook and now I am trying to improve the display clarity. By shifting the "clock" monitor bar to 100 ,the letters were less faded but edges of my screen were lost (by zooming in). Can I fix that through Linux?
I'm newbie linux user and I want to ask a question about my laptop display is too big i think its because of my screen resolution, how can I change my monitor resolution?
I have tried to connect my GMA500 based Acer 751 to an external dsiplay via VGA connection. I couldn't get the right resolution on the external screen (1920/1080) so I disconnected it and rebooted. Now there is only an "unknown" screen in the display menu. I have rewritten the xorg conf file per instructions for enabling GMA500 but to no avail - conf file looks right but screen is "unknown", low resolution and 4:3 aspect ratio, instead of 16:9. How to restore to laptop monitor - I think I can take from there to enable the right resolution.
This is my third SLackware install. I installed 10,12, now 13. the Xorgsetup has changed I think, it does not display the screen to choose Horizontal and Vertical settings for the monitor. In addition, how can I set the Refresh rate?
I am running Debian 8.3, and I'm running Gnome 3.14.1.I have an external monitor plugged in with HDMI, and while Linux is loading both screens are on duplicate. Once the GUI kicks in, only the external screen works, so I have to enter my password blindly. Then, I open a terminal and run
