CentOS 5 :: More Than 800x600 Screen Resolution?

May 17, 2010

Loaded Cent O/S on VMWare Workstation to begin learning for enterprise role.. The largest screen resolution is 800x600. Is this the max or how can I change it to a larger res.?

View 4 Replies


ADVERTISEMENT

CentOS 5 :: Screen Resolution Only 800x600 Using VMWare?

Nov 9, 2009

I use a VMWare ESX Server and installed CentOS.

Within the CentOS I can only use the Screen Resolution 800x600.

As I have a VMware installed I use the VMware grafic adapter shown in the hardware selection.

Even if I configure the VM graphic adapter within the ESX to use 1600x1200.

Is there any change to configure a higher resolution?

View 1 Replies View Related

CentOS 5 :: 5.5 - Make Welcome Screen Display At 800x600 Resolution?

Feb 20, 2011

My monitor is an old, low-res (800x600 resolution) flatscreen, and the loader keeps trying to set it for 1024x768.the initial setup and package selection screens ran fine. it was only after rebooting to the "Welcome" screen that the problems started. I found the "resolution= (800x600 for me) under "additional boot options", but I don't know how to use it.

View 3 Replies View Related

CentOS 5 :: Aspire One Screen Resolution Stuck On 800x600?

Mar 31, 2011

I've installed CentOS 5.5 on my Acer Aspire One D150. It uses the Intel integrated graphics chip GM945 which isn't supported "out of the box" by CentOS. My screen resolution has defaulted to 800x600, but it should be 1024x600. tried xrandr, and editing the xorg.conf file, and now have gone down the rabbit hole of trying to install xf86-video-intel and its associated dependencies (nested like Russian matryoshka dolls). I'm at the point of trying to install xorg-server, but am getting hung up by its dependencies on xproto and fontsproto, despite having installed them.

View 5 Replies View Related

Fedora :: Screen Resolution Won't Go Above 800x600

Oct 19, 2009

i recently installed fedora 11 i386 from fedora 8 i386. it was a fresh install. with 8 i had a 1024x768 res and my monitor is a 15.4" Polaroid LCD tv that has a max res of 1280x800. when i goto display and try to change the res it only shows 800x600 and below.

View 11 Replies View Related

Fedora :: 11 - Fix Screen Resolution Higher Than 800x600

Oct 1, 2009

Im running fedora 11. I pressed the desktop effects button yesterday, and it suddenly changed my resolution to 800x600 when it was previously a lot higher. I couldn't fix it, so i reinstalled fedora 11. Couldn't fix it. Reinstalled Windows XP, then reinstalled fedora 11, and it fixed. Now, 12 hours on, it has gone back to 800x600. How can i fix this?!

View 4 Replies View Related

Ubuntu :: Screen Resolution Changed To 800x600?

Oct 26, 2010

I've been using Ubuntu for about two years now, then suddenly today (after my PC accidently lost power) the screen resolution changed to 800x600 (it is, in fact, a widescreen monitor, and this resolution looked 'zoomed in'). The only two resolutions detected with xrandr were in the 4:3 ratio (800x600 and something worse). I followed some instructions, trying to reset the resolution to 1024x576.

I got as far as

$ xrandr --newmode "1024x576" ...

then,

$xrandr --addmode default 1024x576

but when I

$xrandr --output default --mode 1024x576

I a message to the effect of 'your screen can only support 800x600 or less'. Ah-ha, I thought, you stupid machine; this screen has had a greater resolution for over a year.

And so, from System->Preferences->Monitor, I forced the computer to switch to this new resolution. When prompted, I reset.

My current problem is that when I turn the computer on, the monitor displays a floating 'Input Not Supported' sign. I Ctrl+Alt+F1'd, and now all 'xrandr' and 'cvt' commands return:

Can't Open Display

My first priority is to get the computer back to it's less-broken 800x600 state;

EDIT: I'm running Ubuntu 10.04

View 9 Replies View Related

Ubuntu :: Screen Resolution Will Not Go Above 800x600 Anymore

Dec 12, 2010

After the latest kernel update (2.6.32-26), my computer will no longer start up with a screen resolution higher than 800x600. Before this update, my computer would sometimes startup with this problem, but this could usually be fixed with a restart (or two if necessary). At this resolution the panels and a lot of tool-bars will not display properly, so I am limited as to what I can do using the GUI.

my video card is an S3 unichrome (I think. It is built-in to the motherboard so I don't know for certain) my screen is an old ctr one I am running Ubuntu 10.04 on the 2.6.32-26 kernel

View 6 Replies View Related

Ubuntu :: Unable To Get Screen Resolution Above 800x600?

Feb 11, 2011

here is output of lspci

Code:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 21)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC

[Code]...

View 7 Replies View Related

Ubuntu :: Screen Resolution - Only Choose 800x600 ?

Mar 3, 2011

I have a good Asus monitor in which I can have a resolution of 1280x800 when using Mac Os (I have a Power Mac G4). However, when I try to have a better resolution with Ubuntu, the only resolution that it lets me choose is 800x600! There are no choices. I tried the "detect display" button but it doesn't change anything.

View 8 Replies View Related

Software :: Not Showing Screen Resolution Beyond 800x600?

Jan 5, 2010

My Fedora 12 is not showing screen resolution beyond 800x600. When I installed latest ATI Radon drivers, screen has become blank and I had to re-install.

View 1 Replies View Related

Ubuntu :: How To Change HP Mini Screen Resolution To 800x600

Nov 7, 2010

I am using HP Mini 1000 Series with Ubuntu 10.10 (later installed with xubuntu-desktop). I want to run a wine application which requires 800x600 resolution. However, my current resolution is 1024x576. The other available solution is 640x480. Previously, I used pre-installed Windows XP, it allows me to change the resolution to 800x600 by clicking the "List All Modes" button at the display setting, then I can choose the 800x600 resolution. So, I think HP Mini is also able to support 800x600 screen resolution. May I know how can I do it in Ubuntu?

View 1 Replies View Related

Ubuntu Multimedia :: Screen Resolution Locked To 800x600?

Jan 5, 2011

I have tried EVERY solution that has been posted. the nVidia forumswon help. Every solution that involves editing the .conf file crash my system. I wanna have real resolution for my monitor not be stuck at this 800x600 bull$#!tnVidia Graphics CardPlanar PL1700 Monitor

View 1 Replies View Related

Ubuntu Multimedia :: 10.04 - Cannot Set Screen Resolution Higher Than 800x600

Mar 5, 2011

I recently installed Ubuntu 10.04 in my computer, I ran update manager and installed all the actualization but and I can not set the screen resolution higher than 800x600; I have windows XP installed in another partition and the screen resolution can get to 1028x1024 at 85 hz. I have a Pentium 4, 2.20 ghz, 1gb ram, and the video card is a SiS (Silicone Integrated Systems) 300/305/630/540/730 32 Mb.

View 4 Replies View Related

Hardware :: Change Screen Resolution From The Current 800x600?

Apr 26, 2010

I am having some trouble trying to change my screen resolution from the current 800x600.I tried to install driver but it didn't. output of lspci: 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)

View 1 Replies View Related

Ubuntu Multimedia :: Unable To Increase The Screen Resolution Beyond 800x600 After Upgrade To 10.10

Jan 29, 2011

I am using a 15" CRT Samsung monitor and when I upgraded 10.10, the screen resolution became 800x600 and I am not able to increase the resolution of it. This was working fine with 10.04 version.

Below is the o/p for "xrandr":
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 600, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 0.0*

I also see a continuous message box at the top left corner of my monitor with text as "Unknown".

View 7 Replies View Related

Ubuntu :: Display Limited To 800x600 Screen Resolution On 9.04 On LG Flatron L1718S

Oct 3, 2010

I'm a faithful user of Ubuntu Linux, especially 9.04 Jaunty Jackalope. I have a problem with my screen resolution on my LG Flatron L1718S. It's a 17 inch and its recommended resolution is 1280x1024.I was on this resolution all along until now. Now I'm limited to 800x600 resolution. Here's what happened. Before installing Ubuntu 9.04 on a friend's computer, I put in his Seagate 40 Gig hard drive into his Intel Celeron Box with a 2.93 GHz and 512MB ram. I then plugged my monitor into his system. Upon booting, I discovered that the hard drive had a very strange looking operating system called OS2 Warp...seemed like Black XP to me. On the desktop, the icons were so big and bloated,the mouse was frozen, there was so much eyecandy which demanded so much graphics resources.

His graphics card is an onboard one, framebuffer. I then rebooted the machine, this time running the Ubuntu 9.04 live CD. Resolution still ok, with 1024x768 this time. I installed Ubuntu 9.04 and finished. I shut down the machine, unplugged my monitor and plugged it back into my machine, which is a Intel Celeron with a 2.4GHz processor, 1,5GB RAM, 80GIG X 2 Seagate IDE hard Drives, 2 DVD Drives, an LG Spermulti-DVD rewriter and a BENQ DC W2000 rewriter.My graphics card is NVidia GeForce NV34 FX5200 Series, 256MB RAM Graphics Card. Suddenly everything on the desktop is so large, and the maximum resolution now is 800x600. It becomes 640x480 if i add Nvidia drivers, version 173. If I switch over to Windows XP, Service Pack 2, I have no resolution issues there. Nvidia drivers are loaded there as well. No issues with resolution there. To test the screen again, I plugged my monitor back into my friends computer that I mentioned earlier on. The resolution is stuck on 800x600. After plugging the monitor back to my computer, I tried to edit the X.conf using "sudo nano", adding the desired parameters, like undetected screen resolutions, monitor name, device,etc, but nothing worked.

I always had to resort to the backed up configuration file for XOrg. The latest Ubuntu 10,04 Lucid Lynx picks up my monitor with a maximum resolution of 1024x768.The Mandriva One 2008 Live CD also gave me the same result like Ubuntu 10.04, this time giving me more higher resolution options. Strangely enough, from my Ubuntu 9,04 and older, after several tests, the resolution is still stuck to 800x600. When I press the AUTO RESET button on my monitor, the screen says "Processing image Auto Adjustment-For Optimal display, change resolution to 1280x1024". A factory reset did not help. The resolution was perfect until I plugged my monitor into my friend's computer, the one with the 2,93GHz processor. I took another friend's monitor, a HP Cathode Tube Monitor, a 17 inch as well, and plugged it to my machine to test the resolution. The results were glorious! All resolution options were shown, from the lowest "320x240" to beyond "1280x1024". Plugged it back to mine, the same result showed: 800x600 resolution, the lowest being 320x240. I kindly ask for advice on how I can be able to get all the screen resolution options available on my Ubuntu 9.04, like before, because it shows the maximum of800x600, lowest- 320x240 on "display" in "System--Preferences".

View 8 Replies View Related

General :: Screen Resolution Settings Higher Than 800x600 With Ubuntu 10.04 Inside Virtual PC

Oct 3, 2010

This is my first posting as a Linux Newbie. I have installed Ubuntu 10.04 inside of a MS Virtual PC on my Vista machine. Everything seems to work beautifully and is stable. However, I would like to use a resolution higher than the current maximum of 800x600. I've poked around on the web and have tried various tips. I tried using the xrandr options which added a higher resolution mode, but when I would try to set the output to that resolution, I would get an error message to the effect that I could not exceed the current maximum of 800x600.

I tried to cobble parameter values together and create an xorg.conf file, but every iteration seems to produce a bunch of colorful vertical bars within my Virtual PC window, and I would have to blow away that virtual PC setup and rebuild it (along with reinstalling Ubuntu). As I said, 800x600 is not a show stopper, but I would like to take advantage of the real estate I have with my display. These "fifty-five year old" eyes could benefit from the larger size. FYI, I did take a stab at installing Virtual Box, but got the infamous "blue screen", so I would rather stick with what appears to be a stable virtual PC base.

View 4 Replies View Related

OpenSUSE Hardware :: Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks - Resolution Limited To 800x600

Mar 12, 2010

I'm stuck at 800x600, and no matter what i try i seem to hit a dead end. I've got the Intel Mobile 945GM/GMS rev 03, and it seems like lots of people have had to fiddle to get it working. Here's the info I've collected and tried so far. Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks � 100% Linux Addict

HOWTO: install drivers and set up widescreen res. with Intel 945 vga card and Ubuntu - Ubuntu Forums Mostly Harmless: SuSE, Acer aspire 5580 and non-standard resolution 1280x800 Intel 945gm And 1280x800 Laptop Monitor Problem Suse 10.2 - openSUSE Forums I'm not too proficient with linux yet, so the right solution might be here and I'm just not getting it right. Maybe i'm not on the right path at all.

View 9 Replies View Related

Ubuntu :: Resolution Randomly Sets To Either 1024x768 Or 800x600 - Permanently Set A Resolution?

Dec 26, 2010

Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?

View 1 Replies View Related

General :: Resolution Max Is 800x600 - Can't Set A Resolution Of 1024x760

Apr 2, 2010

I've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?

View 2 Replies View Related

Debian :: Can't Change Resolution From 800x600

Apr 12, 2010

got an acer aspire one zg8 running debian in a vmware enviroment i only have 800x600 and cant change resolution do i need to install linux drivers for intel 945 express vga card? i googled for drivers for vga card but linux and there were linux drivers,but it said linux 4 trying to get into linux.

View 1 Replies View Related

Debian Multimedia :: Cannot Get Better Resolution Than 800x600

Aug 25, 2010

I just installed Debian 5 onto an older PC and cannot get a better resolution than 800x600. The PC is currently dual booting with Windows XP and in Windows I can get the resolution to 1280x768 without any issues. I checked the device manager in Windows and the video card shows up as VIA/S3G Unichrome II. What do i need to do to get this working at 1280x768 in Debian? I had Mint installed previously and it got to this resolution fine until I upgraded it to a new version, then it was stuck at 1024x768.

View 3 Replies View Related

Ubuntu :: Cannot Set Resolution Higher Then 800x600 10.04

Jul 2, 2010

I have just done a clean install of 10.04 and cannot for the life of me set the resolution higher then 800x600 When I go to change the resolution I am greeted with a unknown monitor.

lspci | grep -i vga
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)

Here is the Xorg config file I have configured

Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
[Code].....

View 4 Replies View Related

General :: Can't Get The Resolution Higher Than 800x600 In 10.10?

Jan 1, 2011

I have installed Ubuntu 10.10 as a virtual machine under my Win7 windows. Everything is OK except that I can not get resolution higher than 800*600. Actually there are two options in Display Settings Menu 800*600 and 640*480. But my laptop has 15.4 inch monitor so its normal resolution is 1280*800.

View 3 Replies View Related

Debian :: Display Resolution Stuck At 800x600

Nov 26, 2010

Recently when I rebooted the display resolution went to 800x600, where as before it was 1024x768. For some reason 1024x768 is no longer listed in (GNOME) System->Preferences->Moniters. Even after reinstalling Debian from scratch it's not there anymore. What can I do to fix this? System->Preferences->Moniters says Moniter: Unknown and stays that way even if I click Detect moniters.

# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm

[Code]....

View 1 Replies View Related

Fedora Hardware :: 11 - Resolution Stuck At 800x600

Nov 24, 2009

My screen resolution is stuck at 800x600. I am using Fedora 11. The screen resolution used to go higher, but after a restart I have not been able to get it about 800x600. Below is a link to my smolt profile, [URL]This is my video driver Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller. It is an onboard card. I have installed a new graphics driver which did not help. The name of it is, i915Graphics.tar.gz. Keep in mind I installed the driver after F11 wouldn't allow me to increase the resolution from 800x600.

View 14 Replies View Related

OpenSUSE :: Only Get 800x600 Resolution With GeForce 6150 LE

Feb 12, 2010

I just installed OpenSuse 11.2 and I can't change my resolution. That max it will give me is 800x600. My display card is GeForce 6150 LE. Is this a known problem and can I do anything about it.

View 3 Replies View Related

OpenSUSE Hardware :: Resolution Stuck In 800x600

May 18, 2010

I just switched to opensuse a couple of days ago and I noticed that my resolution was stuck in 800x600. I went and downloaded the nvidia drivers and went to install the driver for my monitor through sax2. When I tried to add the monitor driver I would get out of range errors. I rebooted and can now set the resolution to 1680x1050 which is my max. However, when I go to test these new settings the resolution shown in the window is 1400x1050. GPU: Nvidia GeForce 9600 GTX Monitor: LG FLATRON L227WTG

View 9 Replies View Related

Ubuntu :: Change Resolution From 800x600 To 1024x768?

Mar 11, 2010

change my resolution from 800x600 to 1024x768..since the latter option is not available in my display settings?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved