OpenSUSE Hardware :: 11.4 And "Cannon Sensys MF4430" Scanner Drivers?
Jul 23, 2011
About ten days ago, I bought multifunctional printer Canon I-sensys MF4430. I did it after I saw there are linux drivers - rpm drivers. But, unfortunately, after buying and installing these package, I saw that drvers given on "Canon" download page are just for printer to work. And it works. But, scanner do not work! Can anybody tell me how to enable scanner which can not be recognized by opensuse 11.4 YaST?Actually this happens:when I click YaST(root password)/Hardware/Scanner autodetection does not recognize scanner. After I click Other -> Restart detection , system recognizes my scanner, but says that drivers are not configured.They are missing.
View 2 Replies
ADVERTISEMENT
Oct 17, 2010
openSUSE 11.3 (64bit)
The printer is plugged in via usb and I'm using the PIXMA MP220 driver (closest # to the model). Printing manager detects status of the printer, however, nothing will print.
Under "Print Self-Test Page" and "Clean Print-Heads" I get this: 'client-error-document-format-not-supported'
Under "Print Test Page" it indicates the job is processed and finished, but nothing happens.
I've found several errors concerning this, but being unfamiliar with CUPS, I'm not sure where to start troubleshooting.
View 3 Replies
View Related
May 20, 2011
I am trying to get Canon MP250 printer and scanner working in OpenSUSE 11.3 and so far I've had limited success. Both components work up to a point, but aren't fully operational.First of all, I installed the drivers from Canon website for both parts of the multifunctional device. Here's the report on the versions (it's localised, but it shouldn't be hard to understand ).
The printer works for the most part. But it fails to set images to greyscale when I request the driver to. There are some guides about that for Ubuntu, but none for openSUSE that I could find. Also, what does the setting "Amount of Extension" in the printer options do?It would also be nice if I could set the printing quality as well. Right now it seems to print everything with the default quality setting, but personally I like using lower print quality since that saves ink and makes it a little faster.
The scanner, however, is hardly usable at all. If I try to use Canon's ScanGear MP to scan, I can hear that it operates the scanner, but the program itself freezes and after a while gives me the "Cannot communicate with scanner" error. On certain settings I can also hear that the scanner itself doesn't complete the scan (the indicator on it also reports an operation in progress, but it never gets completed).If I try to use Acquire images, the native KDE scanner application, I can get it to scan, but only on very specific settings: it must scan it in colour and the resolution must be equal to or over 300 dpi. If I try anything else, the resulting image file is completely blank or I get an "Error during device I/O". And, of course, it can't save PDF files.
View 5 Replies
View Related
Jul 11, 2010
I just received a Canon Pixma MX320 as a gift.
I am currently running the Ubuntu 10.04 OS
I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.
Unfortunately I am not having the same luck with the scanner.
I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.
View 2 Replies
View Related
Mar 31, 2010
Looking over the sane project for the epson GT-S50 scanner I see it lists requires DFSG non-free esci-interpreter-gt-s80 Does anybody know if one is writing their own scripts with bash and scanimage if that requirement of DFSG is still required under ubuntu (Karmic or lucid)????
View 1 Replies
View Related
Mar 10, 2011
I have a CanonMP280 printer and Ubuntu 10.10. Mp280 is not recognized by Ubuntu 10.10. Through 'cybertechhelp' I was very lucky to get the printing drivers to install. So the printer works.
No-one seems to be able to find the 'scanner' drivers and Canon_help is useless. So I must dual-boot with Windows to be able to scan.
Although win7 is a vast improvement on vista. I would much prefer to single-boot with Ubuntu. I tried other Ubuntu and Ubuntu-Based distros, but, the printer-drivers I have, only work in Ubuntu 08.04 - 10.10
View 8 Replies
View Related
Dec 6, 2010
I am running ubuntu 10.04. I have an Epson Wprkforce 310 4 in 1. Connection is USB. I can print. I have searched for proper drivers for scanner and fax. I have found nothing for fax. I have found and installed at one time or another the following scanner drivers:
iscan_2.21.0-6.ltdl7_i386.deb
iscan_2.26.1-3_i386.deb
iscan-data_1.6.0-0_all.deb
iscan_2.26.1-3.ltdl7_i386.deb
The 1st 3 installed but nothing happened. When I installed the 4th, I got a message telling me about the scan app I have installed(default with ubuntu install). Hope welled up inside. When I opened the scan app, it said it could not find a scanner. WF 310 was on hoping for a driver.
View 1 Replies
View Related
Mar 18, 2011
I have installed the c2esp driver for the printer part of my AIO. I am unable to find any scanner drivers that works. Does any one know of any drivers that will work?
View 3 Replies
View Related
Mar 21, 2011
I am having a problem with the Sane Drivers and a Scanjet HP4570 scanner. I have sane-backends-1.0.21-6.fc14 and I am running on x86_64 machine. Other info in my signature below. I have verified that the specific Scanner works as I have installed it on a Win Machine. I ran yum provides *libsane* . Results with respect to the hp5590 libs was --->
[Code]....
How to get the Scanner working, as I would expect it to work out of the box. It is one of the scanners that is completely supported, as per SANE web page info. I also have a hp3300c and it found that immediately.
View 7 Replies
View Related
Aug 27, 2011
which (printer+scanner) is compatible with linux and drivers are in repo's?
HP LaserJet Pro M1132
SAMSUNG SCX-3200
witch of them is better? better performance , ...?
View 1 Replies
View Related
Apr 27, 2010
I have downloaded successfully the drivers for the printer component of the MX330. The scanner drivers are downloaded,but I am unable to locate the working part of the .sh file so that I can open it. I have the .sh file in text, but do not know how to utilize it
View 1 Replies
View Related
Jun 21, 2010
I installed Fedora 13 and can't install my multifunction printer CANON i-SENSYS MF4690PL.The scanner works fine (very odd) only printer not working.Is there a specific driver for this printer and if so, how to install this driver on Fedora 13? The MF4690PL and GNU/Linux I get this in terminal:
Code:
[root@Philip philip]# system-config-printer libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.How do I now if the kernel has support for my printer ?
[Code]...
View 5 Replies
View Related
Sep 17, 2010
have installed various flavor of the OS only to find that I cannot use my current printer. Have tried most of the setup for installing the printer but just cannot not get it to work.
View 1 Replies
View Related
Jan 20, 2011
I have recently formatted my PC (About a week ago) and installed Ubuntu-Linux 10.10. I also recently installed a Cannon Pixma MP495. Which is a Wi-Fi model. I connected the two windows PC's in my home just fine. However, I don't know how to wirelessly link it to my netbook. The Model number of the netbook is Acer Aspire One AOD205.
View 3 Replies
View Related
Aug 15, 2010
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies
View Related
Dec 14, 2010
How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
View 3 Replies
View Related
Mar 17, 2010
After downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
View 4 Replies
View Related
Sep 23, 2010
Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.
I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.
lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.
and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005
but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.
My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic
View 8 Replies
View Related
Apr 9, 2010
Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports
'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..
View 3 Replies
View Related
Sep 7, 2010
I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.
View 9 Replies
View Related
Oct 22, 2010
my scanner used to work in lenny, now im using squeeze fresh install.
i intall hplip with synaptic in order to setup my scanner, printer is working, i dont need the fax, but the scanner is not working with xsane.
normal user and sudo see the scanner with
$ scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
$ sudo scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
code....
i know my user is in group lp and scanner root cant use the scannner either.
View 1 Replies
View Related
May 9, 2011
after few years being limited with my pc configuration (windows OS) I realized that linux or it's distributions is the best invention in 21 century. And finally I am starting use it. openSUSE 11.4 installaition succesful, I updated it and it looks I don;t have any problems, but I got few questions.
1. How install older version of mozilla firefox internet browser here? I can't install some plugins because it's a firefox beta 12 version, for example. I am quake fan, o I like play quake live, but i can't install quake plugin, because my firefox is beta version.
2. Does I got all drivers instantly installed to my mashine? ATI video drivers, sound drivers ect??
3. Are there any How-To guides which can teach me, how I can improve my desktop? gadgets, 3D desktop ect...?
View 5 Replies
View Related
Sep 4, 2010
I verify in Intel site that my Intel'drivers are outdated, because Dell Suport is slow, so how do I update them in Opensuse?
Do I use Virtual Machine or try through Wine?
View 4 Replies
View Related
Sep 12, 2010
I have recently obtained a dell 725 printer but it the drivers do not seem to be available when I try to configure it.
View 3 Replies
View Related
Aug 6, 2010
I am using Suse 11.1 on a 64-bit computer. Some time ago, I was helped on these forums to get a Brother MFC-640CW printer/scanner to work by downloading the relevant drivers from the Brother website. Although the printer works fine, when I attempt to scan something into the computer nothing happens. A pop up box appears on screen when the printer is used with an XP OS. Can anybody suggest a way to get the scanner working?
View 3 Replies
View Related
Feb 24, 2010
I have a HP3500c scanner and skanlite does not see it. How do I get it or some other scanner program to work with it?
View 9 Replies
View Related
Jun 25, 2009
I have a printer/scanner/fax that's on the network. i have the printer part set up through cups but how do I set up the scanner? What programs can I use on opensuse to see the scanner?
View 9 Replies
View Related
Feb 23, 2010
I recently have a need to get my HP ScanJet 5590 working. Never used it in suse, only in the old windoze daze. Running opensuse 11.2, kde 4.3.4 quite nicely.
When I dusted the scanner off (USB) and plugged it in and fired it up, then went into Yast, scanner, it correctly recognized the scanner by model, but the driver line has Not configured: in front of the driver info. And, it will not do a test scan, nor do any apps see the scanner. As far as I can see all the dependencies are installed, I just need to configure the scanner. But I can't find any place in Yast to do that, nor do I have a clue what command line would work.
View 5 Replies
View Related
Nov 15, 2010
I have a Bearpaw 1200CU scanner that is not recognized by Yast, so I cannot use XSane to scan my images. Is there anyway to get the driver?
View 2 Replies
View Related
Dec 18, 2009
I have a HP Office-Jet 6110 All-In-One for about 5 years now and I havve been using it on Suse and openSuse without a problem all these years. This morning I wanted to scan something and suddenly realised that the scanner is not working. I can print but not scan. i tried to set up the scanner using YaST like I have done for the past 5 years but it#s not working. Hpaio shows that no scanner is available for this driver. I can#t install the scanner. What has changed in 11.2 that devices that worked before are not working anymore?
View 7 Replies
View Related
