Ubuntu :: Scanner Not Seen On 10.10
Oct 28, 2010
I've been using a Nikon Coolscan 4000ED on Ubuntu for a couple of years via Vuescan with no problems at all.
The other day I upgraded to 10.10 and Vuescan can no longer see the scanner. So I tried X-Sane and Simplescan and they both say there is no scanner even though it's connected and switched on. So for some reason, Ubuntu 10.10 cannot see the scanner or perhaps the IEEE connection.
View 2 Replies
ADVERTISEMENT
Jul 11, 2010
I just received a Canon Pixma MX320 as a gift.
I am currently running the Ubuntu 10.04 OS
I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.
Unfortunately I am not having the same luck with the scanner.
I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.
View 2 Replies
View Related
Aug 15, 2010
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies
View Related
Dec 14, 2010
How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
View 3 Replies
View Related
Apr 9, 2010
Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports
'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..
View 3 Replies
View Related
Sep 7, 2010
I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.
View 9 Replies
View Related
Mar 17, 2010
After downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
View 4 Replies
View Related
Sep 23, 2010
Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.
I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.
lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.
and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005
but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.
My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic
View 8 Replies
View Related
Oct 22, 2010
my scanner used to work in lenny, now im using squeeze fresh install.
i intall hplip with synaptic in order to setup my scanner, printer is working, i dont need the fax, but the scanner is not working with xsane.
normal user and sudo see the scanner with
$ scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
$ sudo scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
code....
i know my user is in group lp and scanner root cant use the scannner either.
View 1 Replies
View Related
Aug 1, 2010
I have a mac, but I have a lot of files on my Ubuntu machine, that i'd like to transfer over, but I would like to make sure they are clean.
View 2 Replies
View Related
May 7, 2011
what scanner to buy to work out of the box with Ubuntu 10.04 LTS
View 7 Replies
View Related
Jan 16, 2010
I am delving into the world of scanners for the first time. With 9.04, my Cannon CanoScan LiDE 25 works without a hitch in ScanLite and Scanner Utility but not in XSane. I am able to scan photos and such and get good quality images. I have an infrequent need to make copies of pieces of paper and have been experimenting a bit trying to make my scanner and printer act like a copier. what type of images to take and how to print them?
View 1 Replies
View Related
Feb 11, 2010
I've recently installed Karmic Koala (64 bit version) on my pc via a live cd.I still can't get my epson scanner to work so my plan was to get VirtualBox and then run xp inside Karmic.My problem is that my pc doesn't have an internet connection.
View 3 Replies
View Related
Mar 3, 2010
Having spent hours and hours on this, I'm ready to give up on Ubuntu. Whenever I run Xsane or Vuescan, I get a message telling me there are no devices available. Op system is Hardy.HP J6480 is conected to network hub.Vuescan works fine under Windows 2000. Printing works fine from UbuntuI have repeatedly installed HPLIP.I have run hp-check and loaded all the dependencies it told me it couldn't find, reducing the number of errors from 9 t(mostly compile time) to 3.Hp-check finds the printer ok, but tells me no scanners were identified.The silly thing is that before I re-installed Ubuntu I managed, somehow, after a lot of work, to use Xsane.
View 1 Replies
View Related
Mar 4, 2010
I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.
I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.
Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.
The printing side of things works fine but I can't get the scanner recognized by Xsane.......
View 5 Replies
View Related
Mar 7, 2010
I'm using 9.10 on x86 architecture. I've searched the forums and anything related to scanning talks about editing /etc/udev/rules.d/45-libsane.rules which doesn't seem to exist on my system. Judging from the dates most of these posts probably relate to intrepid or jaunty. XSane just says 'no devices available'. Printing works fine.
View 6 Replies
View Related
Mar 31, 2010
Looking over the sane project for the epson GT-S50 scanner I see it lists requires DFSG non-free esci-interpreter-gt-s80 Does anybody know if one is writing their own scripts with bash and scanimage if that requirement of DFSG is still required under ubuntu (Karmic or lucid)????
View 1 Replies
View Related
Sep 13, 2010
I have an Epson perfection V100 Photo scanner. When I open any programit will not detect the scanner. Simply plugging in the scanner and crossing fingers does not work.sane-find-scanner returns the following:
Code:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
[code]...
View 6 Replies
View Related
Nov 8, 2010
I'm trying to get a network scanner to function. I've been following the guides here:
http://ubuntuforums.org/showthread.php?t=1519201
https://help.ubuntu.com/community/ScanningHowTo
And I think I am just misunderstanding something.
1. The scanner is properly functioning on the server side.
2. Both, the client and the server, have the package sane-utils installed.
3. I changed /etc/default/saned on the server to RUN=yes (that was easy!)
4. Editing /etc/sane.d/saned.conf is what I think I'm getting confused on. The internal IP address of the server is 192.168.1.102 and the subnet mask is 255.255.255.0. The internal IP address of the client is 192.168.1.103. So, what do I put there? Is 192.168.1.0/24 correct? That didn't work!
5. Also, editing /etc/sane.d/net.conf on the client is confusing me too! What IP address should go there? Can I put the server name? What is the correct syntax?
6. I added saned to the correct group, lp. I made sure that the scanner was owned by the correct group by doing these commands:
sane-find-scanner
AND
ls -al /dev/bus/usb/XXX/XXX
The group was lp.
View 4 Replies
View Related
Mar 21, 2011
I followed the instuctions in the ubuntu forums and i got the printer to work but i cant get the scanner to work, simplescan lists the printer but when i try to scan i get an error message.
The printer is a brother MFC-8660DN. I am running Ubuntu 10.10 on a Sony Viao tower, Pentium IV 512mb ram, Nvidia 4ti graphics card.
View 1 Replies
View Related
Mar 29, 2011
I have just installed the drivers for the scanner on my brother mfc5460cn. Xsane recognizes the machine but cannot open due to an invalid argument. The problem seems to be that xsane is looking for the machine at bus 1 dev 1 however, lsusb shows the machine at bus 2 dev 5.
How can I fix the discrepancy? I've tried sudo chmod a+w /dev/bus/usb but there was no change.
View 1 Replies
View Related
Jul 20, 2011
I am having some issues with 11.04. My print/fax/scanner is connected directly to the ethernet line, and 11.04 cannot detect the scanner portion through the Simple Scan program. I am using an HP Officejet 4500.
I used to be able to scan perfectly fine when using 10.10, and it just won't work anymore I have the HPLIP toolbox installed, and I can't get it to open/run!
View 1 Replies
View Related
Jan 22, 2011
I have a 3in1 Epsonsx415, the printing part works perfectly but Ubuntu 10.10 will not detect the scanner.
View 2 Replies
View Related
May 4, 2010
What is the best scanner to use with ubuntu 10.04 LTS were drivers that come with Ubuntu are compatible.
Recently purchases a Brother Laser printer model 2142, drivers were already install, I am very impressed with Ubuntu, surpasses windows as I was a hard core windows user.
View 1 Replies
View Related
Apr 27, 2010
how to run benq scanner 5000 and web cam im ubuntu
View 1 Replies
View Related
Apr 20, 2010
I just got a new scanner HP Photosmart C4640 and tried to set it up on Ubuntu 8.10SANE has it as supported, but I can't scan.Printing works fine. when I run xsane I get
Code:
Failed to open device 'v4l:/dev/video0': Invalid argument.
Poking around I found ScanningHowTo page. But I was unable to find the .fw, .usb, or a PPD
[code]....
View 3 Replies
View Related
May 16, 2010
I cant find my scanner (Canon MP250). I have installed the printer and it works fine, this using the drivers from canon (canon divers page) and installed the scanner drivers too. Im running:
Code:
$ uname -a
Linux ubuntu 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:27 UTC 2010 x86_64 GNU/Linux
Installed the drivers with
[Code].....
View 4 Replies
View Related
May 18, 2010
During installation of Ubuntu 10.04, there was no driver found for my Brother MFC-665CW printer/scanner. However, I recently learned on the Forum that there is a printer driver available for the MFC-665CW through Synaptic that can be accessed by searching on printer name. I got it, and it works great. I've not been successful in locating a driver for the scanner part of the MFC-665CW. Does anyone know if there is a driver available on Synaptic that will work for the scanner on a MFC-665CW, and if so how to get to it (i.e., what to search on to locate it)?
View 3 Replies
View Related
Sep 12, 2010
I am trying to install IP scanner. I downloaded it and am trying to do the next command but I am being told there is no file or directory. Here is what I did.
$ wget [URL]
--2010-09-12 20:46:17--[URL]
Resolving sourceforge.net... 216.34.181.60
Connecting to sourceforge.net|216.34.181.60|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: [URL] [following]
--2010-09-12 20:46:17--[URL]
Resolving downloads.sourceforge.net... 216.34.181.59
Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: [URL] [following]
--2010-09-12 20:46:17--[URL]
Resolving softlayer.dl.sourceforge.net... 74.86.229.28
Connecting to softlayer.dl.sourceforge.net|74.86.229.28|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 820580 (801K) [application/java-archive]
Saving to: `download'
100%[======================================>] 820,580 590K/s in 1.4s
2010-09-12 20:46:19 (590 KB/s) - `download' saved [820580/820580]
greg@greg-laptop:~$ sudo mkdir /opt/angry-ip-scanner
greg@greg-laptop:~$ sudo mv ipscan/ipscan-linux-3.0-beta4.jar /opt/angry-ip-scanner
mv: cannot stat `ipscan/ipscan-linux-3.0-beta4.jar': No such file or directory
greg@greg-laptop:~$ sudo mv ipscan/ipscan3-binary/3.0-beta4/ipscan-linux-3.0-beta4.jar /opt/angry-ip-scanner
mv: cannot stat `ipscan/ipscan3-binary/3.0-beta4/ipscan-linux-3.0-beta4.jar': No such file or directory
View 7 Replies
View Related
Oct 28, 2010
I have a multi-function printer/scanner that plugs straight into the LAN via RJ45. Printing works fine, but I'm not sure how to proceed to set up the scanner. Just to be clear, I am not asking about connecting a usb scanner then sharing it over a LAN, that's different. This scanner plugs straight into the LAN.
View 5 Replies
View Related