I'm running Suse 11.3 fresh install, works fineBut I'm trying to make work a wusb54gv2, ndiswrapper -i works fineI'm using lastest ndiswrapper versionit seems tha options -m -ma -e maybe others don't workwhen doing ndiswrpper -l
goldf-fish:/ # ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
wusb54gv2 : driver installed
[code]...
I have a dual partition with xp pro, and Ubuntu 10.04. It really is amazing, and i plan on erasing everything and starting over new again, this time just ubuntu. with windows, i have a Linksys Compact Wireless G usb Network Adapter with speedbooster ver.2. it works in windows from the CD, but its for windows. ive tried ndiswrapper-utils, ndiswrapper-common and ndisgtk downloads and it opened the program, but sat with the spinning circle for 5 seconds then faded to grey. HOW do i get this to work? i'm in a hurry, as i am leaving for vacation in florida, and i have the only laptop in the house and we bring it every year. If there is something easy (or complicated but with step by step) that i could use to get the driver for my usb network thingy,
View 2 Replies View RelatedI got a strange issue here: We are using ISC DHCP v4 which is default in Open SuSE 11.4. These two options 'default-lease-time' and 'max-lease-time' are set in all subnets, with values between 43200 (12 hours) to 518400 (144 hours). See partial dhcpd.conf below please.Now the lease time from Windows client's ipconfig output is only 10 minutes. Why? (dhcpd on servers restarted many times. ipconfig /release, ipconfig /renew on client run many times)
Code:
lease-file-name "/etc/dhcpd.leases";
default-lease-time 43200; # 12 hours
[code]....
I have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies View RelatedI have openSuse 11.2 on my Omnibook 6100. I have a netgear wg511 v2 wireless pcmcia card. I used ndiswrapper to install the drivers for this card. Ndiswrapper shows the driver installed properly and shows the card is present but the card will not even power on. What could be the cause of this and how do I fix it?
View 4 Replies View RelatedI use Termlite from SCO as my terminal emulator. It works on SUSe 9.3 but i can not get it working on 11.3. How do I enable the networking for this in SUSE 11.3.
View 1 Replies View RelatedI'v not seen any security or any other updates,including firefox for many months(since January or earlier. Is there anything wrong?
View 9 Replies View RelatedI tried to compile with latex (pdflatex) some beamer presentations and I getpdflatex astrosiesta0411.texwarning: kpathsea: configuration file texmf.cnf not found in these directories:usr/share/texmf/web2c.This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/openSUSE)I am not a latex expert, but in yast I noticed that suse 11.3 is now installing texlive (I have also the texlive-bin bin-latex latex and latex-doc installed) while my old 9.2 where everything worked had tetex.I found that there is no directory web2c in /usr/share/texmf, but there is one in /usr/lib/texmf/.I also found that /usr/share/texmf/README says:And yet another: texmf-dist should be distribution-independent, so that,in theory, it could be used by distributions other than TeX Live. So,no web2c/kpathsea-specific files.
View 9 Replies View RelatedIam newbi to SUSE, I installed java in my SUSE linux Server edition, So i want to set the path in linux,So i created .bash_profile in in /root path using touch and added the path as "JAVA_PATH". When restart my linux the above command is not working and it show unknown command "JAVA_PATH", I can't able to boot in GUI mode, I can boot only in terminal mode, How to delete the file (.bash_profile in /root) ? And how to add java path in SUSE
Note: Before all the commands are working fine
Few months ago I had updated my OpenSuse 11.2 to new kernel but I broke it so never got to fix it. Now I've upgraded it to 11.3 and its working really well. Really happy with the KDE interface. Not missing Windows 7 at all (dual booting). I've got almost everything working and in fact got a lot more apps than Windows. For example 2 or 3 different versions of MSN Messenger!
I've got couple of minor issues. Firstly, my Logitech Webcam isn't getting detected by OpenSuse. When I open up the Cheese app it doesn't detect any cam.
Secondly, is there a Yahoo Messenger available for Linux? I've got some family/friends who use MSN and others Yahoo. I need webcam functionality in Yahoo Messenger.
I installed OpenSuse 11.4 (x86_64) a couple of days ago.One of my Drives a PC-DVD RAM (Creative) is not working. This worked under 11.3.The SCSI drive is connected to a PCI/SCSI adapter (AHA-2904).The message I see at boot is:ata_id[443]HDIO_GET_IDENTITY FAILED /dev/sr1I also see the message ata_piix not found, and can not find an option in the kernel
to provide this.This causes the system to wait a long time and slows down boot dramatically
I am with a customer who has Suse 10.1 in production environment and connected to the internet.For now I want to install denyhosts on this machine since I see lots of failed login attempts outside office hours.However when I do: python setup.py install I get the message File "setup.py", line 4, in ?from distutils.core import setupmportError: No module named distutils.coreI don't know how to solve this. I have added a repository to install distutils.core but could not find it
View 1 Replies View RelatedI'm running vanilla SuSE 11.1 on a vanilla server with Webmin 1.51 and Apache 2.2.
For a month now, I've been trying to get virtual hosts to work with Webmin without success. When I browse for the second site, I continually come up with the default host site.
just forget Webmin and modify the httpd.conf file directly. That defeats the purpose of trying to use Webmin.
After installing Suse 10.0 I'm unable to get my network card working. Also the volume control in the task bar in not working. Using Yast I tried configuring network card. The exact card is not on the list provided by Suse. Is this the problem & how do I fix it?
View 2 Replies View RelatedIt is me again. I have succeded and make video and audio working in Skype but I cant make Microphone working at all. Tried some info I found on the web but no way.
View 7 Replies View RelatedJust installed opensuse 11.2 (64-bit version) and I have a problem with the Mplayer browser plugin. Basically it comes up OK, I get the MPlayer plugin splash screen and controls exactly as expected, it downloads the media successfully (or at least looks like it does) but then doesn't play, it just reports "Stopped".
Mplayer itself works fine, it's just the browser that doesn't.
System info:
OpenSuse 11.2 (64-bit)
kernel-desktop 2.6.31.5-0.1.1-x86_64
MozillaFirefox 3.5.11-0.1.1-x86_64
mplayer 1.0rc4_r31930-1.pm.3.1-x86_64 (from packman repo)
mplayerplug-in 3.55+cvs20100124-0.pm.1.1-x86_64 (from packman repo)
I have been using openSuse 10.3 on my laptop since 6 months now. Only last week i came to know about this bootable kde suse : http://news.opensuse.org/2009/01/09/...-opensuse-111/
When i was done succesfully booting from the usb stick, and came back to my good old suse10.3 on my laptop, i found out that the system sound has suddenly stopped working. My sound is coming with my usb stick, but not with my native os.
I'm having issue with trying to put the 11.3 DVD iso to a USB pendrive...I've verified the ISO md5sum matches, formatted the pendrive to FAT32, unmounted and finally done:
# isohybrid openSUSE-11.3-DVD-x86_64.iso
# dd if=/path/to/iso/openSUSE-11.3-DVD-x86_64.iso of=/dev/sdX bs=4M;sync
Everything appears to work fine, but once I try to boot I geterror saying no installation CD/DVD is not found and is asking for software installation repository, so I select the media as hard drive since if I select cd/dvd drive, the messag "no repository found"...then I select the USB drive (sdc1 4.2GB, iso9660, openSUSE-DVD) then it asks for "enter the source directory"...I'm not certain what to enter there, so I just point to the root directory "/" and installation continues...followed by "no new driver updates found"....so GUI starts up again...it loads kernel modules, to confirm "usb-storage"...then a message "the partitioning on disk /dev/sdc is not readable by the portioning tool parted,...." I click OK...finally I get stuck on
I have a Rosewill RNX-N150pc wireless card that's been working great with Suse 11.2. But with 11.3, it's able to scan for my wireless network, and I see RX/TX packets moving, but DHCP isn't able to get an address. I've tried the 2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0 and 010_07_16_RT3062_Linux_STA_v2.4.0.0 drivers from the Rosewill site, and the rt3562sta-kmp-desktop-2.4.0.0_k2.6.34.0_12-1.1.i586.rpm package from Suse, all with the same result. I've even tried forcing an IP address on the interface with 'ifconfig', so my current guess is that the WPA-PSK security isn't working.
[Code]...
When I run suse 11.3 live from CD I can connect to the Internet, but when I install it I can't get it to connect.
View 4 Replies View RelatedI'm trying to get the 3D Cube desktop working in SUSE 11 Enterprise Desktop.
I have tried this with the onboard NVidea graphics card and with an added GeForce 8600 XT card with no luck.
No matter what I try, I get an error when I turn on the Desktop enhancements which says that my hardware does not support this feature?
why this particular feature is such a pain to install?
I have a use case where in I am trying to build a yacc program using bison. When I run this on SLES 9, I get errors. But the same works for me fine on a SLES 10 system.
The versions of bison, glibc are different. Hence I moved the rpms from SLES 10 machine to SLES 9 and did a rpm2cpio of these 2 to a temporary folder and did a export of LD_LIBRARY_PATH. When I try to run the program ( ./bison) I am getting a segmentation fault. I have the following questions :
1) IS the scenario what I am trying to do - using a newer version of libc( from sles 10) to sles 9 supported ?
I am currently running openSUSE 11.2, but I do not like the KDE4 interface. I downgraded everything back to KDE3, but kept the KDE4 artwork. The NetworkManager program under KDE4 works fine and can connect to my home wireless network. However, The previous of NM cannot cannot connect to any wireless network.
I find it kind of odd, since KNetworkManager is just a frontend to the real NM, with was not actually changed when I downgraded.
When I installed opensuse 11.2 on my notebook i found my broadcomm 4312 wlan card in the hardware list, but it's not working. I probed different ways to solve the problem.
I found these methods: [url]
I tested them all.
I'm afraid this is not enough, because the wlan led is not lighting. Every extra button works well such as volume buttons, but the wlan button does not working, so i can't switch on the wlan.
I have faced following problem in my office opensuse server there are 6 users working at a time from terminal.all are using java,php eclips programming application.The system is working fine for every user as reported.but it is going to be slow if we start any macromedia flash 8 releted web application on browser.I have checked memory,cpu usege also check iostat,mpstat everything on it ,no such difference.
View 4 Replies View RelatedI've got a handy new Lenovo G560 running with OpenSUSE 11.3 64-bit. After a normal out-of-the-box installation the laptop speakers failed to mute when I plugged in headphones and I was only able to regulate the sound for both the speakers and the headphones simultaneously. Then I installed a whole lot of ALSA stuff and my sound devices were recognized as "PulseAudio server (local)". Speakers muted when I plugged in headphones - a big yay.
Now, though, my microphone doesn't work any more. It worked before, I'd talked on Skype with it, but upon trying to make a call with Skype today I noticed that it didn't work any more. Sound's turned up in KMix, so everything should be okay - does anybody know how to get my microphone working again?
I just installed open suse 11.2 on a dell inspiron 6000 and i can not get the wifi card to work. Yast sees it, but that's about it. Ethernet works fine- hence the post.... any ideas? Model: intel pro wireless 2915abg calexico2.
View 1 Replies View RelatedI installed openSuSE 11.2 sometime ago in a COMPAQ Presario CQ60-419WM laptop (the ones that Wal-mart sold for $300 about a year-and-a-half ago. I installed the 64-bit version because I saw that the processor could support that (perhaps that was not a good idea). I have some problems that seem related to not having the necessary drivers. My wireless has never worked and my display is far from what I would like it to be (the response is slow, if a drag a window, its motion is jerky, if I scroll down in a browser window, the motion is wavy). The look and feel is very different from what I get at work and I do not know how to fix it.
[code]...
Just trying to execute cd command in a .cshrc file (bash shell in SUSE Linux) it says."No such file or directory".Do you see any reasons for this
View 3 Replies View RelatedSuse 11.0 nvidia software repository not working when the updater is run, and it gives an error message which indicates it must be out dated and no longer used. Here is the site in my repository for nvidia; [URL], I did try to add a new nvidia repository site with that Yast tool, but I could not get it to fully work. The new one I did find was as a ftp type, not [URL]. With this older Suse 11.0, and kernel 2.6.25.20-0.7-pae, then is it true that there may not be any more nvidia display driver updates available.? So then I should just remove that nvidia repository from the list, and be okay if the kernel does not update too much newer version, right ?
View 4 Replies View Related