After installing Suse 10.0 I'm unable to get my network card working. Also the volume control in the task bar in not working. Using Yast I tried configuring network card. The exact card is not on the list provided by Suse. Is this the problem & how do I fix it?
View 2 Replies
I am with a customer who has Suse 10.1 in production environment and connected to the internet.For now I want to install denyhosts on this machine since I see lots of failed login attempts outside office hours.However when I do: python setup.py install I get the message File "setup.py", line 4, in ?from distutils.core import setupmportError: No module named distutils.coreI don't know how to solve this. I have added a repository to install distutils.core but could not find it
View 1 Replies View RelatedRunning Suse 10.0 on a lenovo idea pad and I am having a problem getting the volume set high enough to hear any music, dialogue!. I have set the volume control up as far as it will go but can hardly hear anything. Had this problem running Ubuntu on a Sony laptop but managed to resolve the problem but cannot remember what I done.
View 2 Replies View RelatedIam newbi to SUSE, I installed java in my SUSE linux Server edition, So i want to set the path in linux,So i created .bash_profile in in /root path using touch and added the path as "JAVA_PATH". When restart my linux the above command is not working and it show unknown command "JAVA_PATH", I can't able to boot in GUI mode, I can boot only in terminal mode, How to delete the file (.bash_profile in /root) ? And how to add java path in SUSE
Note: Before all the commands are working fine
I have volume on my SUSE 11.1 But it is very weak compared to my MS OS.
View 1 Replies View RelatedI'm new to SUSE. I had some virus issues with Windows Vista and decided to change my OS.
I have the modem set up and still can't get the internet to come up. I get the mozilla blank webpage, but I am connected to the internet server. What can I do to get full internet access if everything seems to be working they way it should except for the blank webpage? I know I must be missing something but what?
Also, how do I open Yast to use it? I think I opened it by accident and got some things done
is it possible to extend a mirrored veritas volume which has two SAN LUNs each one in a seperate EMC storage box.
i need to add diska -> EMC box1
and diskb -> EMC box 2
then i need to increase the size of the mirrored volume.
I made an image of a server(A). It did not work because It did not see /dev/sda. So I used another cd from indentical sever(B), cd which had work. Then mounted the nfs copy the image over. Server(B) had slightly older version of sles. And its not using lvm. But point is it had appropriate driver in the image cd.
Now situation is, This new image copied ever thing over.(I can mount it using LIVE CD). But When I boot up server it wont see vg volume group. I believe scsi driver is missing.After booting from LIVE CD I chroot in root used yast to add initrd modules, qla2xxx, mptbase, mptscsih(other server(B) had those). Still when I reboot it, it get stuck saying
Code:
No volume groups found
unable to find volume group
waitnit fot device /dev/vg1/root
to appear .... not found device nodes:
.....
......
.....
No root device found. exiting to /bin/sh
sh: cant access tty; job control turned off
I've had a hell of a time with this and now all but YAST2 are ok. Going back some time to 10.0 this could be used to disable it very completely.
open terminal and run
echo "alias net-pf-10 off" >> /etc/modprobe.conf
echo "alias ipv6 off" >> /etc/modprobe.conf
restart computer. Has anyone used this on more recent issues even 11.4 and are there any repercussions?I assume that the inverse will but it back on ie off's just become on's? I will be using cups when I install my printer which is one concern and I am not at all sure that modprobe will do anything anymore?
I also recollect that there is a command to cause the kernel to effectively reboot which would save restarting. Can't remember what it is. Maybe some one can refresh my memory.
I am trying to set up a home network but I am having a slight problem. The network is reported as being open and active but when I click on the Windows network icon a dialogue reports that " unable to mount location, failed to retrieve share list from server. What have I missed. I have tried other distros such as PClinuxOS and that connected automatically so there is no physical problems with my wired network. My Workgroup is MSHOME and my host is Home1.
View 2 Replies View RelatedI have problem with network on my laptop. Networks status is Active and Online but i cant open any pages. (was working until installation openSUSE on ext HDD)I already try both wireless/wired connection but nothing.
View 2 Replies View RelatedMy Suse server is failing to boot and it is giving the following error:
Mellanox ConnectX Boot over IB v1.9.972
gPXE 0.9.6+ -- Open Source Boot Firmware -- [URL]
No more network devices
I have two network interfaces
Infiniband network and the Ethernet network.
It is a x6275 Sun server.
I just installed open suse 11.2 on a dell inspiron 6000 and i can not get the wifi card to work. Yast sees it, but that's about it. Ethernet works fine- hence the post.... any ideas? Model: intel pro wireless 2915abg calexico2.
View 1 Replies View RelatedJust trying to execute cd command in a .cshrc file (bash shell in SUSE Linux) it says."No such file or directory".Do you see any reasons for this
View 3 Replies View RelatedI'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
View 2 Replies View Relatedi run network based windows softare under wine in ubuntu or open suse.
View 1 Replies View Relatedi am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies View RelatedI mistakenly delete my default panel. How to add the network notifier? Tried to look for the widget but nothing? i need to choose my network connections. And when i look at the Network manager my wireless if black ? It means it didn't detected my wireless?
View 8 Replies View RelatedI just installed suse on this computer, and am wanting to allow other computers to store files on it as a file server. I was reading the online manual and in the personal file preferences, it shows an option to enable 'share public files over network'. The problem is I don't see that option when I open up file preferences. All I see is an option to allow sharing using bluetooth, nothing about sharing over the network. When I look in the network I can see the computer running suse, but when I try to connect to it, it says 'unable to mount drive: connection refused by server.'
View 3 Replies View RelatedNew SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....
I am attempting to setup a linux file server in active directory. It has been kind of an ongoing project(nightmare) for me... I have tried a few distributions of linux and I have to say I really enjoy openSUSE. YaST is my best friend. Now to the problem at hand.
I have samba installed and configured for the domain. I was able to successfully join the machine to the domain. I can even log on using domain user names and passwords (more than I was able to accomplish with other distros...). Where I am having a problem currently is I cannot see the suse machine from a windows machine. I can access shares from suse to windows though.
I got the new version of ubuntu 10.4 and my volume is not working. I checked everything 3 times. No sound comes out at all. I checked the speakers to my laptop to make sure they actually work and they do.
View 2 Replies View RelatedHP 210 Mini
Fedora 14 xfce
2.6.35.11-83.fc14.x86_64
I have inserted my handy drive. However, when I right click and select unmount I get the following message:
An application is preventing the volume "New Volume" from being unmounted
So I try from the command line:
umount /dev/sdb1
And I get the following message:
umount: /media/New Volume: device is busy.
All I have done is copied some files to my handy drive. So I am not sure what process is keeping my handy drive busy.Is there any command that I can use to see what process of anything else is using the handy drive?
it's a while now that the volume control in gnome stopped working. I tried to reinstall gnome-media, but without success. The icon is present in the top bar and I can see the volume slider, but it simply doesn't change the volume.I'm using F15 on x86_64.
View 2 Replies View RelatedI shared a few directories using samba which can be detected with XP or OSX over the network. However, when I try mount those folders this error occurs (OSX): 'Volume X could not be mounted'.I checked that smb as wells as xinetd is running and that the firewall ports are open (also tried deactivating the firewall with no success).
View 8 Replies View RelatedI am having issues with Fedora 11 and audio. I have pulse audio running and configured. The volume control on the top panel (GDE) works properly, but i do not hear any volume until I move it up past 50%. I tested it with the advanced volume controls opened and it even shows the master volume not moving until the volume slider on the panel reaches at least 50%. Can anybody help with fixing this. It is very annoying. Thanks in advance for the support.
View 3 Replies View RelatedI have a dual boot and my windows plays audio fine.My ubuntu plays audio fine as well however when I click on the Volume Control icon on the panel it gives me this error:No volume control GStreamer plugins and/or devices found.and I am still unable to control volume. I have alsamixer installed and it can control my system sound fine but all this time I've been able to use the controls on my HP Pavilion dv5250ca laptop's keyboard controls to control the volume and I'd like to be able to continue doing that- I haven't been able to for the last 2 days.
View 7 Replies View RelatedI appear to have accidentally removed the volume and the network applets from the tray and can't find them in the "add to panel" list ...
View 9 Replies View RelatedI'm having trouble getting keyboard volume keys working with lxde. I have tried a couple of methods found on another forum, but they did not work
View 4 Replies View RelatedI'm running Debian testing/unstable, with my swap on an lvm volume. When I boot into the system, the swap doesn't become activated, even though there are messages that point to the contrary (for instance: "activating swap file...done"). After it's done booting, I run the command "free" and it shows that there is no space allocated to swap. "swapon -a" doesn't load the swap file either -- I have to do "swapon /dev/mapper/xxx-xxx". The swap appears in fstab, and also in /etc/initramfs-tools/conf.d/resume.
View 6 Replies View Related
