OpenSUSE Hardware :: Screen Rotation With Radeon Driver?

Mar 31, 2010

I just replaced my older monitor with a slightly newer, much nicer Dell 1905FP. I need to have it rotated, but I have no clue how to rotate it. I have seen several xorg.conf modifications that are supposed to work for some of the nvidia drivers, but nothing for the generic radeon driver. The radio buttons in SaX2 are grayed out as well. How do I set up X11 to rotate my display? Preferably without installing the other ATi driver, as I have tried before to switch to that one, and have been unsucessfull.

View 5 Replies


ADVERTISEMENT

OpenSUSE Hardware :: After Installing 11.3x86_64 Specifically For The ATI Radeon HD 4850 Proprietary Driver - Having Intense Screen Tearing

Sep 4, 2011

After installing OpenSuse 11.3x86_64 specifically for the ATI radeon HD 4850 proprietary driver that was created with intended compatibility from ATI, I have intense screen tearing.

View 4 Replies View Related

Hardware :: Driver For Radeon 7000/VE - Cannot Get The Screen Resolution

Mar 25, 2010

I have a machine with an ATI Radeon 7000/VE graphic card and I can not get the screen resolution I need. This is running on redhat enterprise 4 OS (32bit). My monitor is a 1600x1280 but I can not get anything better than 1024x768. I did set the desired resolution in the xorg file. I guess this would rather be a driver issue? I am running with radeon driver at the moment. I tried to get the fglrx from ATI but they do not seem to give any linux support for this card.

View 4 Replies View Related

Debian Installation :: Radeon ATI Gives Black Screen, Even With Nonfree-driver?

Jul 15, 2011

The screen goes black while "waiting to populate /dev/"and only by adding acpi=off can I boot into my system, and then I see that I get an error message during boot when "populating /dev/ " that says"fatal error during GPU init", even after I've installed the firmware-linux-nonfree.deb, which is the one for the R300 family, which I'm guessing is the right one, since lspci tells me I have:Radeon IGP 330M/340M/350MI've read the wiki[URL]

View 5 Replies View Related

Fedora :: F14 Black Login Screen After Ati Radeon Driver Install?

Apr 25, 2011

I`m using a N5010 dell laptop with an Ati Radeon mobility 5650, I tried to install the ati drivers on F14 which caused a black login screen and there is no way to open the console and do anything. On top of that I`m using Ubuntus Grub2 so I`m practically stuck.

View 7 Replies View Related

Slackware :: Black Screen With Radeon Driver (asus X1650xt)?

Jun 19, 2010

i have an asus radeon x1650xt vga, i can use the latest radeon driver in ubuntu 10.04 and also in the newest fedora but in slackware 13.1 i get the same black screen i used to get with older ubuntu, fedora and other distros. i can only use slackware with the vesa driver, what could be the problem...here is my /var/log/Xorg.0.log

Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04

[code]...

View 13 Replies View Related

OpenSUSE Hardware :: Driver For Radeon 5850 On 11.3?

Aug 4, 2010

I've installed openSUSE 11.3, and I want to have hardware 3D acceleration on my Radeon 5850. Far as I can tell, I don't have any right now (for example, I installed armagetron and it uses software rendering).

I'm a technical enough user, but I'm new to openSUSE and to Linux, and my previous attempt of installing ATI drivers (proprietary ones on Fedora) resulted in the OS being unable to boot. I figure that asking for directions would help make things work out better this time.

View 7 Replies View Related

OpenSUSE Hardware :: Kde Won't Start With Radeon Driver

Nov 11, 2010

I got 11.3 64-bit installed properly the first time around and working with a Radeon HD4350. I noticed X to be somewhat sluggish on certain apps under KDE so a couple of days ago I tried to install the Catalyst 10.10 tool from the unofficial repository. I didn't like it and uninstalled it.

After some research it turned out that the proper driver is radeon so I uninstalled the radeonhd driver and rebooted hoping Xorg will pick up the radeon driver automatically as it is included with my kernel. Didn't work and I couldn't even get past the failsafe login screen. Regular boot doesn't even get to the login screen. Just hangs and won't respond to any keyboard commands.

I followed the instruction at this SDB Configuring graphics cards in openSUSE 11.3 using the ATI Xorg -configure option from level 3 console and creating a radeon xorg.conf file. It all works to the point of "startx" as regular user which just brings me back to console. Rebooting and does the same things as before under failsafe and regular. Even nomodeset doesn't help. The output error from startx in failsafe console mode is the following:

Code:

Could not open library ksmserver: Cannot load library /usr/lib64/libkdeinit4_ksmserver.so (libatiuki.so.1: cannot open shared object file: no such file or directory) reinstalling is not an option as I have a lot of custom stuff on this box.

View 9 Replies View Related

OpenSUSE Hardware :: ATI Radeon Proprietary Driver Isn't Working In 11.2?

Nov 12, 2009

Ati 11.2 repo isn't accessable. Ati catalyst 9.3 dont want to install.

View 9 Replies View Related

OpenSUSE Hardware :: Can't Install ATI Radeon HD 2600 Driver On 11.3 X86

Jul 27, 2010

recently I have downloaded opensuse 11.3.tried to install latest version of graphic driver.but after uncompressing it says:

which: no XFree86 in (/home/muhammad/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.34-12-desktop:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.fvzKbN

I have installed kernel sources,xorg x11 headers and gcc.

View 9 Replies View Related

OpenSUSE :: Radeon Opensource Driver 6.13 Supporting Xorg 6.5 And Mesa 7.8.1?

May 9, 2010

Is the radeon open source driver 6.13 supporting Xorg 6.5 and Mesa 7.8.1?

View 9 Replies View Related

OpenSUSE Hardware :: Which Driver For ATI Radeon HD 4800 - Desktop Effect

Dec 24, 2009

When I first installed openSUSE 11.2, it has no xorg.conf of course, but it detected the subject card and loaded radeon instead of radeonhd. When I used Sax2 to create an xorg.conf for a problem, I noticed that it for the device it created:

[Code]....

When I rebooted with this xorg.conf, lsmod says that it's still radeon that is loaded:

[Code]...

I know that radeonhd does cause some issues with KDE desktop effects, but according to Radeon - openSUSE, the cards above X1900 should be using radeonhd. Instead of either of these, should I try to use the ATI driver fglrx? It seems from my gleaning of forum posts that these have some problems, but I am having some desktop effect issues that maybe would be addressed with that driver.

View 4 Replies View Related

OpenSUSE Hardware :: Which Driver To Sapphire ATI Radeon HD 2600 XT AGP 256MB

Feb 20, 2010

I didn't found working driver for my card yet. Using OpenSUSE 11.2 KDE, Motherboard MSI 648F Neo, Pentium4 2.8GHz, 2 x 1GB DDR.I've found, that my card should be supported according to HCL/ATI Video Cards - openSUSEInstallation following ATI drivers - openSUSE Easy Way didn't work because of chcecksum difference (x11-video-fglrxG02), Repositary Way too. Hard Way Installation resulted to disability of Graphic Environment and I wasn't able to fix that (finally, I somehow get running KDE, but Kwin always broke down, so system was unuseful).

I also tried packages found by Software search (Software.openSUSE.org), so package 'xorg-x11-driver-video-radeonhd' but nothing works for me, some of them provide result of "glxingo | grep direct" -> "No", some of them "Yes", but in this case I wasn't able to run "glxgears", because of error "drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info." Desktop Effects I cannot run anyway. how to get graphic acceleration working. It will be great if is here someone with exactly same, or similar card, he could write a step-by-step guide to do that. Starting with fresh installation of OpenSUSE (not corrupted by my previous tries) is not problem.

View 9 Replies View Related

OpenSUSE Hardware :: Cannot Install ATI Radeon 4670 Display Driver

Mar 13, 2010

I tried to install the driver using the easy and hard way, but unfortunately I couldn't install it. When the file manager opens up through terminal after I type in the command using super user mode, I select the downloaded file and it opens it up in kwrite.

View 9 Replies View Related

OpenSUSE Hardware :: Unable To Use ATI Radeon X850XT Free Driver On 11.3

Aug 23, 2010

I have a problem with free ATI driver with Radeon X850XT 256Mb VRAM. I cant get 3d acceleration in OpenSUSE 11.3.

System : Linux lv426 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 x86_64 x86_64 x86_64 GNU/Linux

Here boot.msg :

<6>[ 5.847172] [drm] Loading R400 Microcode
<6>[ 5.854547] [drm] radeon: ring at 0x00000000B0000000
<3>[ 6.032976] [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)
<3>[ 6.035637] [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).

[code]...

View 4 Replies View Related

OpenSUSE Hardware :: Radeon Driver Opengl Support ( Lack Of )?

Sep 20, 2010

I'm an owner of a ATI mobility radeon X1300 card. Since ATI tagged my card as legacy, i'm stuck with the open source radeon drivers. Wich doesn't bother me, as i know they are slower and openGL support doesn't equal fglrx. What does bother me is that the current version 7.9 dev. claims to have full opengl support up to 2.1. I'm trying to use a extention that is part of the openGL version 1.3 and it's failing. This is a known issue for a long time now and it really disappoints me. "Compressed textures" is what i'm talking about.

Is there any way to make sure that drivers aren't tagged with something they support if they obviously don't? I guess the KDE4 kwin vs drivers thing is the same as i'm trying to say now. Drivers should be documented with what they effectively support and not what they should support. What can I do to make this public to xorg developers? I could only think about posting this here as i have no idea where to put it elsewere. Could someone please point me in the right direction to where i should send this complaint?

View 2 Replies View Related

Fedora :: Get Screen Rotation In Boot Up Automatically?

Mar 2, 2010

I have a big LCD screen.I make it 90 degrees retated to play games .But I want to know :if I can get rotation in boot up? I'm using Fedora 12 in KDE. My screen display driver is Intel . I think can write something into /etc/X11/xorg.conf to make it,or write into KDE's init script /usr/bin/startkde ( if there is a command like"rotate 90",then I can write it here).

View 3 Replies View Related

OpenSUSE Hardware :: Radeon 4670 Ati Driver - Graphics Card Recommendation?

Mar 13, 2010

I recently bought a HIS HD 4670 IceQ card but can't get it to work in openSUSE 11.2 Under Windows the card works fine, so I assume there is no hardware problem. I tried this card in two computers with different mainboards, but it does not work. Several times I reinstalled openSUSE completely from scratch (tried both 32bit and 64bit versions) but no luck. The problem: Right after the installation it uses the radeonhd driver. This basically works, but without 3D (no Tuxracer...) and even 2D is slow (dragging around windows on the desktop is slow, page scrolling in firefox also).

Then I tried to install the ati proprietary driver, both from rpm (the rpm's from the "official" ati repository have a checksum error, as already mentioned in another thread!), and by downloading the driver from AMD and running the install script. The install script seems to work successfully. The kernel module is compiled and loaded. "aticonfig --initial" makes a rudimentary xorg.conf. But then, when starting X, it does not work:

- on one of the 2 tested systems, even kdm does not start, the screen simply stays black with a frozen cursor top left, even CTRL+ALT+backspace doesn't do anything - on the other system, kdm starts and shows the login screen, but when trying to start KDE kwin crashes, and the windows have no title bar (when I googled for this symptome I found lots of people also having this problem...) - trying to configure the system using sax2 didn't help, even sax2 doesn't display properly I have now spent 4 days trying to get this to work and now I'm really tired of those buggy graphics drivers, be it proprietary or open source...

Can anyone recommend me a graphics card that is approximately as powerful as the radeon 4670 (I bought this card because it is said to be the most economical card (both in price and energy consumption) that allows to play Anno 1404 reasonably well on windows), but is known to work in openSUSE 11.2, even in 3D mode (tuxracer...)?

View 4 Replies View Related

OpenSUSE Hardware :: 3D Support With Radeon UMS Driver + Kernel 2.6.34rc5 + X Server 1.8?

Apr 26, 2010

This is just to report that I've got 3D support successfully enabled on my Mobility Radeon HD3200 chip with the open source driver on openSUSE 11.2. I did this to replace the proprietary fglrx driver that has already been installed for quite some time on my system.

Uninstalled fglrx, and here we go... Basically what I did was to get the latest X.Org server (1.8) and Mesa from Index of /repositories/X11:/XOrg/openSUSE_11.2 I changed all the corresponding system packages to the versions in that repository. I noticed that I cannot get any 3D support when pairing the last X server with the updated openSUSE 11.2 kernel (2.6.31.12_0.2). With RadeonHD driver it gives me no acceleration at all (No DRI), perhaps it is still intentionally disabled to prevent lockups in r600 cards. With Radeon KDE wouldn't start.

So to get usable driver support I have to update the stock kernel to the one in Index of /repositories/Kernel:/HEAD/openSUSE_11.2 I installed the 2.6.34-rc5-22 kernel and reboot. Immediately I notice that KMS is working, but I could not get DRI to work, presumably caused by the drm being unable to locate two related firmware files (it is there in the kernel, just doesn't know why it is not being loaded). Other than that I do not know why I can't get any acceleration with KMS on. To workaround I passed the 'nomodeset' parameter to the kernel to run in UMS mode instead, and voila! with UMS 2D + 3D accelerations are working. I can enable kwin effects just fine.

Since this is a laptop I need suspend & resume and power management working. Good news is s2ram works perfectly with extra parameter. And all the new Radeon power management options: DynamicPM, ClockGating and ForceLowPowerMode can be enabled just fine! (For UMS you need to generate a xorg.conf and put those options in)Performance is good. So far it's faster than fglrx in some areas and slower in some other area. Now this is truly amazing!

View 9 Replies View Related

OpenSUSE Hardware :: Radeon Driver And ATI ES1000 - Flickers One Time Each 4 Of 5 Seconds

Apr 8, 2011

I upgraded a HP Proliant server to openSUSE 11.4 (X86-64) with KDE, and I'm encountering various graphical problems. This machine's been running SUSE versions since 11.0 on similar hardware with few major issues, and I did the 'upgrade' by a new install keeping only /home partition intact. This Server has 10GB memory. It has a PCI ATI ES1000 with 64MB and uses the radeon driver. It boots up fine under the monitor's correct resolution of 1600*1000, but

1) It flickers one time each 4 of 5 seconds
2) during works more and more memory is used : starting at 9% and going up to 51% after 20 minutes and I receive then allocation error in /var/log/messages

[Code]...

View 9 Replies View Related

Ubuntu :: Tecra M7 Stylus Directions After Screen Rotation

Oct 21, 2010

I have a slight problem with setting of a stylus in my Tecra m7. It works fine when screen is in default position, but when I rotate the screen to vertical (left/CCW) touchpad and stylus input does not change so when I move it up it it goes right ^^'

xinput goes like this:

Code:

I already tried few .sh's from this forum archives but it didn't seem to work. I disabled driver for graphic card, because recommended version showed only violet screen when starting system and older version does not support rotation. I use Ubuntu 10.10 with Gnome.

View 9 Replies View Related

OpenSUSE Hardware :: System Freeze With Radeon Driver + DRI / FireGL V3100 Card?

Jun 29, 2011

After a bit of work I got 3d acceleration (direct rendering) working on my system. Now, whenever I use intensive graphics, (certain screen savers, Google Earth overlay animations) all performs fine for a while (1-2 minutes) and then causes a full system freeze. Only solution at that point is a hard power reboot. I don't know where to look for a solution, since I can not check any diagnostic files when the system is frozen.

System:
Intel Pentium 4 CPU 3.00GHz
ATI FireGL V3100 graphics Card
OpenSuse 11.4 with radeon driver.

View 9 Replies View Related

Ubuntu :: 10.04: Calibrate Touch In HP Tx2000 - Set Up Automatic Screen Rotation

May 5, 2010

I have an HP Pavilion tx2000 tablet, wich is working perfectly in Ubuntu 10.04. The touch and the stylus works out of box, and i'm using the script that Favux has posted to rotate my screen and i've installed the wacomrotate daemon, wich is working too. Now, I've two questions: How to calibrate it? The stylus is ok, but the touch isn't calibrated. In Karmic, I was using wacomcpl and xsetwacom, but neither of them detect my tablet now (in 9.10, Hal was used to detect the tablet, now it's xserver-xorg-input-wacom).

[code]...

It's possible to set up the automatic screen rotation, like in Windows (the screen rotates automaticaly in tablet position)?

View 9 Replies View Related

Ubuntu :: Screen Rotation In Lucid - Gateway M275 Tablet ?

Jul 1, 2010

Recently installed ubuntu on my gateway m275 tablet alongside windows xp tablet. Everything, including the stylus/pen without any poking around. However, I'm having trouble getting the screen orientation to rotate.

If I go to system-preferences-monitors, the only option for rotation is "normal".

Here is my xorg.conf:

Code:

View 9 Replies View Related

Ubuntu Installation :: Motion Computing M1300 - Screen Rotation

May 27, 2011

I just installed ubuntu 10.04.02 on to my tablet, aside from the dreaded intel video problem. Install went ok, but I'm finding now. That when I rotate the screen, the touch screen isn't adjusting to match. I'm not really ubuntu savvy.

View 6 Replies View Related

OpenSUSE Hardware :: Install The Correct Driver For RV710 Radeon HD4350 Grahics Card?

Mar 15, 2010

Am trying to install the correct driver for my RV710 Radeon HD4350 grahics card.which version out of these two I should install: * x11-video-fglrxG02 (for HD2000 series and later) * x11-video-fglrxG01 (for Radeon 9500 - X1900)

View 3 Replies View Related

OpenSUSE Hardware :: Screen Corruption On Radeon 9800 Pro 128MB?

Jun 1, 2011

I'm getting some weird corruption on the screen in openSUSE 11.4 or Ubuntu Natty and wondered if anyone has seen this or could offer some suggestions. My config: Athlon XP 2400+, ATI Radeon 9800 Pro 128MB (R350NH), 1GB RAM, fresh install of either OS. It manifests as evenly spaced columns of discolored pixels, which change as different windows are drawn on the screen. At first I tried compiling the latest radeon drivers from git, but that didn't help. I've also tried nomodeset, x11failsafe, turning off desktop effects, turning off dri/dri2, and nothing seems to help. The corruption appears even if I switch to the vesa driver or fbdev. Any suggestions? This has got me stumped.

lspci
dmesg
Xorg.0.log
Uploaded with ImageShack.us

View 5 Replies View Related

OpenSUSE Hardware :: 11.4 Screen Blinking ATI Radeon X1650 Series?

Sep 5, 2011

Similar to the other threads, but a completely different card/manufacturer. The others were mostly Nvidia. I have a dial boot machine, HP PAvillion with Windows 7 and now openSUSE, 11.4.

One (of my many problems right now!) is the screen / monitor constantly blinks/flashes/blanks. About every 15-20 seconds, it will go black for about 1-2 seconds and then come right back.

I was using KDE the first go around, and have since re-installed and am now running Gnome. I switched to Mint in between and did not have this problem. Also, I do not appear to have this happen at the logon screen. I have also tried ubuntu and didn't have the problem. I have checked the screen saver settings, and power save options and have them set to off and a couple of hours respectively. I have also modified the xorg.conf.d file to hard code the monitor settings. (Dell 23"). The card is Dual DVI out, and I have it converting to VGA to the monitor.

View 3 Replies View Related

OpenSUSE Hardware :: Black Screen With Radeon HD 4200 - With All Graphics Drivers?

Jul 17, 2011

I'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:

* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen

[code]...

View 4 Replies View Related

OpenSUSE Hardware :: No Login Screen With 11.4 (Suse Studio Build) With ATi Mobility Radeon HD 4250

May 25, 2011

I finished making a custom build OS of openSUSE 11.4 using suse studio but when I tried running the LIVE DVD in a laptop with an ATi Mobility Radeon HD 4250, I got a black screen. Everything from the word go seemed fine showing everything from the loading Kernel message, but the screen that is supposed to show the user accounts is surprisingly absent and only a black screen in its place.

I have only seen this problem with ATi graphics, Intel graphics work just fine. I haven't tested it on a laptop with nvidia. I'm using the default openSUSE 11.4 Kernel (Kernel-Desktop 2.6.37.6-0.5.1), Xorg-X11-driver-video-radeonhd 1.3.0_20100512_80ba041-2.1, Mesa 7.10.2-7.3.1, Xorg-X11 7.6-43.44.1. I have listed these few packages contained in the build, but I'm not sure where to look or what I may be missing.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved