OpenSUSE Hardware :: 11.4 Screen Blinking ATI Radeon X1650 Series?
Sep 5, 2011
Similar to the other threads, but a completely different card/manufacturer. The others were mostly Nvidia. I have a dial boot machine, HP PAvillion with Windows 7 and now openSUSE, 11.4.
One (of my many problems right now!) is the screen / monitor constantly blinks/flashes/blanks. About every 15-20 seconds, it will go black for about 1-2 seconds and then come right back.
I was using KDE the first go around, and have since re-installed and am now running Gnome. I switched to Mint in between and did not have this problem. Also, I do not appear to have this happen at the logon screen. I have also tried ubuntu and didn't have the problem. I have checked the screen saver settings, and power save options and have them set to off and a couple of hours respectively. I have also modified the xorg.conf.d file to hard code the monitor settings. (Dell 23"). The card is Dual DVI out, and I have it converting to VGA to the monitor.
View 3 Replies
ADVERTISEMENT
Feb 17, 2010
I have a new system with an ati mobility radeon hd 5730 chip. As far as I know, there are new drivers in the works, but aside from some articles, I haven't found anything that specifically tells me how to get them installed/working (at least, so that it works for the 5000 series of radeon chips).Has anyone had any luck with this yet? I'm just at the stage of installing, so I don't really care if it involves a different distro, etc. I've tried Ubuntu 9.10 and 10.04-alpha2, as well as Fedora 12 (from the live CD) and so far no luck.At the moment, all I care about is getting the native 1600x800 working for my screen. I haven't a clue how do do that...it seems like I might be able to do this using xrandr, but I don't know how to create a mode properly.
View 6 Replies
View Related
May 28, 2010
I have a performance issue using the open source radeon driver. I normally would just attribute this to the driver still not ready, but it was working fine on the Mandriva install I just wiped out. I replaced madriva in order to have Qimo sessions for my daughter to use. When I try to run glxgears the gears basically don't move.
View 4 Replies
View Related
Mar 9, 2009
I have a computer with an integrated graphics card. It is ati radeon xpress 200 series. It have installed OpenSuse 11.1 on my computer with KDE 4.1. I have heard that we have to manually install ati and nvidia drivers. Or can the open source drivers run my card. has the drivers for my card already been installed. Or should i install it manually. I donot have an internet connection on my pc. but i can download the required files from another computer and bring them to my pc.
View 3 Replies
View Related
Feb 6, 2010
So far everyone thats tried to help has mentioned modifying xorg.conf On this installation, there is no xorg.conf file. Anyone with video troubleshooting experience with ubuntu 9.10 ? I cannot even get 800x600 16 colors displayed correctly
View 2 Replies
View Related
Jan 29, 2011
First problem is that there does not seem to be any Catalyst Control Center available for this driver. Is there one anywhere for Linux for this driver? The graphics card appears to be constantly at 99% usage at all times when simply sitting at the desktop. Is there a way to bring this down to virtually no usage like it should be at?
The display area on my monitor does not extend to the edges. In Windows, I can simply scale it to 0% to overscan in order to completely fill the screen inside the Catalyst Control Center; in Linux, I have been unable to do so with a monitor. Is there any way to scale the display area to completely fill my screen?
View 2 Replies
View Related
Feb 10, 2010
I just bought a new ASUS laptop with the Mobility Radeon HD 5470 card.It seems like there's no driver for it yet (the amd.com download wizard is a dead end because I only find the HD 4000 series).
Is there anything I can do to get support for this card? At least I'd like to be able to change resolution. Or do I simply have to wait for a new ATI driver?
View 3 Replies
View Related
Oct 11, 2010
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 3 Replies
View Related
Jan 28, 2011
First problem is that there does not seem to be any Catalyst Control Center available for this driver. Is there one anywhere for Linux for this driver? The graphics card appears to be constantly at 99% usage at all times when simply sitting at the desktop. Is there a way to bring this down to virtually no usage like it should be at?
The display area on my monitor does not extend to the edges. In Windows, I can simply scale it to 0% to overscan in order to completely fill the screen inside the Catalyst Control Center; in Linux, I have been unable to do so with a monitor. Is there any way to scale the display area to completely fill my screen?
View 9 Replies
View Related
Apr 30, 2011
I really don't know what's going on here. I had Ubuntu 10.10 working great, and noticed 11.04 came out. I had been waiting a while and, for some reason, I decided to start with a fresh install rather than an upgrade.So basically here's what I've done so far:
- Installed Ubuntu 11.04 amd64
- Installed Opera, and XSensors
(sensors-detect only detected my GPU and CPU, not mainboard this time. But I can live with that.)
- Activated the FGLRX driver, rebooted.
---
- Tried to launch Catalyst Control Center, received this error message:
[Initialization error]
There was a problem initializing CCC Linux edition. It could be caused by the following.No ATI graphics driver is installed, or the ATI driver is not functioning properly. Please install the ATI driver apropriate for you ATI hardware, or configure using aticonfig.
View 3 Replies
View Related
Aug 3, 2011
Recently I decided to install my first linux. I choose openSUSE. Installation went smooothly and everything seemed to work just fine. After few days i noticed that sometimes my screen blinks for some time. During this blinking everything is working very slow.Today when blinking started i decided to see CPU usage of specific processes and I noticed that during this strange behaviour Xorg CPU usage is about 40% or more, it seems odd to me because usually it is few %. I am wondering what is the cause of this behaviour and how can I do something about it.I am using KDE, my graphics card is Intel GMA 4500.
View 6 Replies
View Related
Jul 20, 2010
When I booted a flash drive with Ubuntu 10.04 desktop on my laptop, the screen started blinking (or moving the picture up for 1/100 sec) and with lines on my screen like on an old TV. I thought it would go away as soon as I installed it and got rid of the USB stick.
VGA compatible controller: ATI Technologies Inc Mobility Radeon X2300
Edit: From what I've read, it should work fine from the "out of the box" driver. Could the problem come from something else?
View 3 Replies
View Related
Jun 14, 2010
I'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
View 4 Replies
View Related
Oct 10, 2010
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 4 Replies
View Related
Jan 24, 2010
i am sort of newbie to linux,i recently installed opensuse 11.2. i also installed nvidia card via 1 click install..
after install compositing didnt work,it said "someother program is blocking it ,type alt ctrl f12 to enable" after i hit that,my screen was stuck at blinking cursor,
so rebooted went to init 3, typed sax2 ,it showed me the options ,it passed the test screen,but after reboot didnt work.rebooted and hit sax2 -r -m 0=nvidia,again showed me option ,but didnt work.
everytime i login i see nvidia logo flashing up,but after login compostiting is still not enabled ,i have no idea what is wrong help please..
my other option is to type nvidia-xconfig to
my config,
nvidia 6150 card,opensuse 11.2 32 bit,amd turion,
my xorg.conf
Code:
# /.../
# SaX generated X11 config file
# Created on: 2010-01-24T16:06:50+0530.
#
# Version: 8.1
code....
View 9 Replies
View Related
Oct 30, 2009
I ran into a problem the moment i installed 11.1. The GUI wouldn't show up (ctrl+alt+f2 yeilded a black screen with a blinking underscore). Failsafe worked fine, though.
So, i tried entering, one by one, every parameter that was entered in the failsafe boot options. Entering 'x11failsafe' gave me a flawless GUI. So, i opened the '/boot/grub/menu.lst' file and added this parameter in the 'showopts' of the normal mode, to make it permanent. Fine. Now, what exactly have i done?
Note- I use an NVidia 8000 series Graphic card. I'll post more details if you need them.
View 4 Replies
View Related
Mar 31, 2010
I just replaced my older monitor with a slightly newer, much nicer Dell 1905FP. I need to have it rotated, but I have no clue how to rotate it. I have seen several xorg.conf modifications that are supposed to work for some of the nvidia drivers, but nothing for the generic radeon driver. The radio buttons in SaX2 are grayed out as well. How do I set up X11 to rotate my display? Preferably without installing the other ATi driver, as I have tried before to switch to that one, and have been unsucessfull.
View 5 Replies
View Related
Jun 1, 2011
I'm getting some weird corruption on the screen in openSUSE 11.4 or Ubuntu Natty and wondered if anyone has seen this or could offer some suggestions. My config: Athlon XP 2400+, ATI Radeon 9800 Pro 128MB (R350NH), 1GB RAM, fresh install of either OS. It manifests as evenly spaced columns of discolored pixels, which change as different windows are drawn on the screen. At first I tried compiling the latest radeon drivers from git, but that didn't help. I've also tried nomodeset, x11failsafe, turning off desktop effects, turning off dri/dri2, and nothing seems to help. The corruption appears even if I switch to the vesa driver or fbdev. Any suggestions? This has got me stumped.
lspci
dmesg
Xorg.0.log
Uploaded with ImageShack.us
View 5 Replies
View Related
Jul 17, 2011
I'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:
* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen
[code]...
View 4 Replies
View Related
Dec 20, 2010
i recently update my linux ubuntu 10.10 when i update it and restarded it my os doesnt work anymore , my screen is also blinking and a dark screen background , what happen to my os ?
View 7 Replies
View Related
May 25, 2011
I finished making a custom build OS of openSUSE 11.4 using suse studio but when I tried running the LIVE DVD in a laptop with an ATi Mobility Radeon HD 4250, I got a black screen. Everything from the word go seemed fine showing everything from the loading Kernel message, but the screen that is supposed to show the user accounts is surprisingly absent and only a black screen in its place.
I have only seen this problem with ATi graphics, Intel graphics work just fine. I haven't tested it on a laptop with nvidia. I'm using the default openSUSE 11.4 Kernel (Kernel-Desktop 2.6.37.6-0.5.1), Xorg-X11-driver-video-radeonhd 1.3.0_20100512_80ba041-2.1, Mesa 7.10.2-7.3.1, Xorg-X11 7.6-43.44.1. I have listed these few packages contained in the build, but I'm not sure where to look or what I may be missing.
View 4 Replies
View Related
Dec 20, 2010
When I put my laptop, a Presario X1000 to sleep that uses Radeon Mobility M7 LW [Radeon Mobility 7500], when it comes back up, I get just black and white "nosie" on the screen.
Even after I do cntr+alt+F1 and then cntrl+alt+F7 it still doesn't appear to restore the regular screen.
View 3 Replies
View Related
Sep 4, 2011
After installing OpenSuse 11.3x86_64 specifically for the ATI radeon HD 4850 proprietary driver that was created with intended compatibility from ATI, I have intense screen tearing.
View 4 Replies
View Related
Nov 12, 2010
I have a problem with the latest Fedora. Installed it cleanly on a machine with Gigabyte H55M-S2 with Intel Core i3. There seems to be no sound and I checked to see if anything is muted but is not. The manual says that the sound chip is ALC888B so this could be the first problem. Any ide how I can make it work? Here is a dump of some things on my system.
Code: [weaz ~]$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
[weaz ~]$ uname -a
Linux EarthwormJim 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
[code].....
View 6 Replies
View Related
May 24, 2010
i have to grep a series say 98782 from a group by series in a file ,how can i grep the series.
View 6 Replies
View Related
Jul 26, 2011
1. a decent screen recorder where i can crop to my designated x and y co-ordinates.
2. how will i record my voice and my partners voice via skype.
3. a good video editing software, where i can pan/crop and upload to videos with full 720p hd.
View 1 Replies
View Related
Feb 22, 2010
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2.
I have seen the boot logs and it shows a warning:
Code:
Warning: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/
I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation.
how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
View 7 Replies
View Related
Jul 11, 2011
I am using fedora 15 on my dell studio 1558 . Sometimes a black screen appears with a cursor blinking when i tries to reduce the brightness of the laptop and somethimes it automatically happens . And i am not able to do anything its just like the blue screen of death as in windows . the only way to get back is by restarting the computer
View 8 Replies
View Related
Feb 16, 2010
I just replaced my PSU and now my computer is not booting up. To make sure that my new psu is not causing the problem, I put my old one back in but it still doesn't boot up. My system powers on, motherboard led glows, the processor starts running and so does the graphics card. The monitor stays blank though. Nothing shows up on the monitor. Just a blank screen with the monitor led blinking. What could be the problem ? It was working fine before I replaced my psu.
View 3 Replies
View Related
Nov 10, 2010
Just did a fresh Ubuntu 10.10 (minimal) install on my Asus EEE PC 1001PX.Before the minimal install I had Ubuntu Netbook Edition 10.10 which worked flawlessly, now all I get is a black screen with a blinking cursor:for the amazing quality, but I guess it's better than nothing.ctrl+alt+Fx does nothing, ctrl+alt+del reboots the computer.Booting with the usb-stick that was used for the install takes me to the login...
View 3 Replies
View Related
