OpenSUSE Hardware :: Driver For Radeon 5850 On 11.3?
Aug 4, 2010
I've installed openSUSE 11.3, and I want to have hardware 3D acceleration on my Radeon 5850. Far as I can tell, I don't have any right now (for example, I installed armagetron and it uses software rendering).
I'm a technical enough user, but I'm new to openSUSE and to Linux, and my previous attempt of installing ATI drivers (proprietary ones on Fedora) resulted in the OS being unable to boot. I figure that asking for directions would help make things work out better this time.
View 7 Replies
ADVERTISEMENT
Mar 7, 2010
I have been having lots of trouble getting my system up and running after I installed a Radeon HD 5850 on my suse machine. I did as they told by uninstalling the previous drivers and installing the new ones as stated in ATI Catalyst™ 10.2 Linux Installer Note.
2)sh ./ati-driver-installer-10-2-x86.x86_64.run
7) /usr/bin/aticonfig --initial
This was all done from a terminal... And I did this for Suse distributions 11.1 and 11.2. Both times my mouse cursor disappeared, but this could easily be fixed by adding the option "SWCursor" "on" option under the Device section.
This was only part of the solution as I still have incredible lag on my windows e.g. when I scroll down a web page it takes incredibaly long to render and you can see it rendering the page in steps from the bottom up. As well as when I drag a window across my desktop it lags behind and you can se it reforming at the new position.
Finally I tried different releases of the proprietary driver. I tried 10.1 and this did not give me the mouse cursor issue, but the window lag still prevails. These are my xorg.conf and xorg.0.log files for my current setup. Opensuse 11.1 and proprietary driver version 10.1. I have an Radeon HD 5850 card.[URL]..
I should add that I am on a private network, and only have the oss, non-oss and packman repositories available. (Is it possible to add the AMD driver repository? Because I have trid and the firewall refuses connection.)
View 6 Replies
View Related
Jan 26, 2011
Has anyone had any luck with AMD's actual ATI driver for 10.10 or should I be using the FGLRX driver that pops up when I install 10.10? I've heard people had issues before with Ubuntu+ATI cards but wasn't sure.
View 1 Replies
View Related
Apr 16, 2010
I am using ubuntu 10.04 and I am trying to install drivers through the hardware drivers in system > administration but I keep getting "SystemError: installArchives() failed" error.I also tried installing the latest drivers from the ati website but nothing worked.When I go to synaptic package manager it says "fglrx-amdcccle" broken. I tried to remove it but when I reboot, it says its still broken.
View 9 Replies
View Related
Nov 11, 2010
I got 11.3 64-bit installed properly the first time around and working with a Radeon HD4350. I noticed X to be somewhat sluggish on certain apps under KDE so a couple of days ago I tried to install the Catalyst 10.10 tool from the unofficial repository. I didn't like it and uninstalled it.
After some research it turned out that the proper driver is radeon so I uninstalled the radeonhd driver and rebooted hoping Xorg will pick up the radeon driver automatically as it is included with my kernel. Didn't work and I couldn't even get past the failsafe login screen. Regular boot doesn't even get to the login screen. Just hangs and won't respond to any keyboard commands.
I followed the instruction at this SDB Configuring graphics cards in openSUSE 11.3 using the ATI Xorg -configure option from level 3 console and creating a radeon xorg.conf file. It all works to the point of "startx" as regular user which just brings me back to console. Rebooting and does the same things as before under failsafe and regular. Even nomodeset doesn't help. The output error from startx in failsafe console mode is the following:
Code:
Could not open library ksmserver: Cannot load library /usr/lib64/libkdeinit4_ksmserver.so (libatiuki.so.1: cannot open shared object file: no such file or directory) reinstalling is not an option as I have a lot of custom stuff on this box.
View 9 Replies
View Related
Nov 12, 2009
Ati 11.2 repo isn't accessable. Ati catalyst 9.3 dont want to install.
View 9 Replies
View Related
Mar 31, 2010
I just replaced my older monitor with a slightly newer, much nicer Dell 1905FP. I need to have it rotated, but I have no clue how to rotate it. I have seen several xorg.conf modifications that are supposed to work for some of the nvidia drivers, but nothing for the generic radeon driver. The radio buttons in SaX2 are grayed out as well. How do I set up X11 to rotate my display? Preferably without installing the other ATi driver, as I have tried before to switch to that one, and have been unsucessfull.
View 5 Replies
View Related
Jul 27, 2010
recently I have downloaded opensuse 11.3.tried to install latest version of graphic driver.but after uncompressing it says:
which: no XFree86 in (/home/muhammad/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.34-12-desktop:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.fvzKbN
I have installed kernel sources,xorg x11 headers and gcc.
View 9 Replies
View Related
May 9, 2010
Is the radeon open source driver 6.13 supporting Xorg 6.5 and Mesa 7.8.1?
View 9 Replies
View Related
Dec 24, 2009
When I first installed openSUSE 11.2, it has no xorg.conf of course, but it detected the subject card and loaded radeon instead of radeonhd. When I used Sax2 to create an xorg.conf for a problem, I noticed that it for the device it created:
[Code]....
When I rebooted with this xorg.conf, lsmod says that it's still radeon that is loaded:
[Code]...
I know that radeonhd does cause some issues with KDE desktop effects, but according to Radeon - openSUSE, the cards above X1900 should be using radeonhd. Instead of either of these, should I try to use the ATI driver fglrx? It seems from my gleaning of forum posts that these have some problems, but I am having some desktop effect issues that maybe would be addressed with that driver.
View 4 Replies
View Related
Feb 20, 2010
I didn't found working driver for my card yet. Using OpenSUSE 11.2 KDE, Motherboard MSI 648F Neo, Pentium4 2.8GHz, 2 x 1GB DDR.I've found, that my card should be supported according to HCL/ATI Video Cards - openSUSEInstallation following ATI drivers - openSUSE Easy Way didn't work because of chcecksum difference (x11-video-fglrxG02), Repositary Way too. Hard Way Installation resulted to disability of Graphic Environment and I wasn't able to fix that (finally, I somehow get running KDE, but Kwin always broke down, so system was unuseful).
I also tried packages found by Software search (Software.openSUSE.org), so package 'xorg-x11-driver-video-radeonhd' but nothing works for me, some of them provide result of "glxingo | grep direct" -> "No", some of them "Yes", but in this case I wasn't able to run "glxgears", because of error "drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info." Desktop Effects I cannot run anyway. how to get graphic acceleration working. It will be great if is here someone with exactly same, or similar card, he could write a step-by-step guide to do that. Starting with fresh installation of OpenSUSE (not corrupted by my previous tries) is not problem.
View 9 Replies
View Related
Mar 13, 2010
I tried to install the driver using the easy and hard way, but unfortunately I couldn't install it. When the file manager opens up through terminal after I type in the command using super user mode, I select the downloaded file and it opens it up in kwrite.
View 9 Replies
View Related
Aug 23, 2010
I have a problem with free ATI driver with Radeon X850XT 256Mb VRAM. I cant get 3d acceleration in OpenSUSE 11.3.
System : Linux lv426 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 x86_64 x86_64 x86_64 GNU/Linux
Here boot.msg :
<6>[ 5.847172] [drm] Loading R400 Microcode
<6>[ 5.854547] [drm] radeon: ring at 0x00000000B0000000
<3>[ 6.032976] [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD)
<3>[ 6.035637] [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
[code]...
View 4 Replies
View Related
Sep 20, 2010
I'm an owner of a ATI mobility radeon X1300 card. Since ATI tagged my card as legacy, i'm stuck with the open source radeon drivers. Wich doesn't bother me, as i know they are slower and openGL support doesn't equal fglrx. What does bother me is that the current version 7.9 dev. claims to have full opengl support up to 2.1. I'm trying to use a extention that is part of the openGL version 1.3 and it's failing. This is a known issue for a long time now and it really disappoints me. "Compressed textures" is what i'm talking about.
Is there any way to make sure that drivers aren't tagged with something they support if they obviously don't? I guess the KDE4 kwin vs drivers thing is the same as i'm trying to say now. Drivers should be documented with what they effectively support and not what they should support. What can I do to make this public to xorg developers? I could only think about posting this here as i have no idea where to put it elsewere. Could someone please point me in the right direction to where i should send this complaint?
View 2 Replies
View Related
Mar 13, 2010
I recently bought a HIS HD 4670 IceQ card but can't get it to work in openSUSE 11.2 Under Windows the card works fine, so I assume there is no hardware problem. I tried this card in two computers with different mainboards, but it does not work. Several times I reinstalled openSUSE completely from scratch (tried both 32bit and 64bit versions) but no luck. The problem: Right after the installation it uses the radeonhd driver. This basically works, but without 3D (no Tuxracer...) and even 2D is slow (dragging around windows on the desktop is slow, page scrolling in firefox also).
Then I tried to install the ati proprietary driver, both from rpm (the rpm's from the "official" ati repository have a checksum error, as already mentioned in another thread!), and by downloading the driver from AMD and running the install script. The install script seems to work successfully. The kernel module is compiled and loaded. "aticonfig --initial" makes a rudimentary xorg.conf. But then, when starting X, it does not work:
- on one of the 2 tested systems, even kdm does not start, the screen simply stays black with a frozen cursor top left, even CTRL+ALT+backspace doesn't do anything - on the other system, kdm starts and shows the login screen, but when trying to start KDE kwin crashes, and the windows have no title bar (when I googled for this symptome I found lots of people also having this problem...) - trying to configure the system using sax2 didn't help, even sax2 doesn't display properly I have now spent 4 days trying to get this to work and now I'm really tired of those buggy graphics drivers, be it proprietary or open source...
Can anyone recommend me a graphics card that is approximately as powerful as the radeon 4670 (I bought this card because it is said to be the most economical card (both in price and energy consumption) that allows to play Anno 1404 reasonably well on windows), but is known to work in openSUSE 11.2, even in 3D mode (tuxracer...)?
View 4 Replies
View Related
Apr 26, 2010
This is just to report that I've got 3D support successfully enabled on my Mobility Radeon HD3200 chip with the open source driver on openSUSE 11.2. I did this to replace the proprietary fglrx driver that has already been installed for quite some time on my system.
Uninstalled fglrx, and here we go... Basically what I did was to get the latest X.Org server (1.8) and Mesa from Index of /repositories/X11:/XOrg/openSUSE_11.2 I changed all the corresponding system packages to the versions in that repository. I noticed that I cannot get any 3D support when pairing the last X server with the updated openSUSE 11.2 kernel (2.6.31.12_0.2). With RadeonHD driver it gives me no acceleration at all (No DRI), perhaps it is still intentionally disabled to prevent lockups in r600 cards. With Radeon KDE wouldn't start.
So to get usable driver support I have to update the stock kernel to the one in Index of /repositories/Kernel:/HEAD/openSUSE_11.2 I installed the 2.6.34-rc5-22 kernel and reboot. Immediately I notice that KMS is working, but I could not get DRI to work, presumably caused by the drm being unable to locate two related firmware files (it is there in the kernel, just doesn't know why it is not being loaded). Other than that I do not know why I can't get any acceleration with KMS on. To workaround I passed the 'nomodeset' parameter to the kernel to run in UMS mode instead, and voila! with UMS 2D + 3D accelerations are working. I can enable kwin effects just fine.
Since this is a laptop I need suspend & resume and power management working. Good news is s2ram works perfectly with extra parameter. And all the new Radeon power management options: DynamicPM, ClockGating and ForceLowPowerMode can be enabled just fine! (For UMS you need to generate a xorg.conf and put those options in)Performance is good. So far it's faster than fglrx in some areas and slower in some other area. Now this is truly amazing!
View 9 Replies
View Related
Apr 8, 2011
I upgraded a HP Proliant server to openSUSE 11.4 (X86-64) with KDE, and I'm encountering various graphical problems. This machine's been running SUSE versions since 11.0 on similar hardware with few major issues, and I did the 'upgrade' by a new install keeping only /home partition intact. This Server has 10GB memory. It has a PCI ATI ES1000 with 64MB and uses the radeon driver. It boots up fine under the monitor's correct resolution of 1600*1000, but
1) It flickers one time each 4 of 5 seconds
2) during works more and more memory is used : starting at 9% and going up to 51% after 20 minutes and I receive then allocation error in /var/log/messages
[Code]...
View 9 Replies
View Related
Jun 29, 2011
After a bit of work I got 3d acceleration (direct rendering) working on my system. Now, whenever I use intensive graphics, (certain screen savers, Google Earth overlay animations) all performs fine for a while (1-2 minutes) and then causes a full system freeze. Only solution at that point is a hard power reboot. I don't know where to look for a solution, since I can not check any diagnostic files when the system is frozen.
System:
Intel Pentium 4 CPU 3.00GHz
ATI FireGL V3100 graphics Card
OpenSuse 11.4 with radeon driver.
View 9 Replies
View Related
Mar 15, 2010
Am trying to install the correct driver for my RV710 Radeon HD4350 grahics card.which version out of these two I should install: * x11-video-fglrxG02 (for HD2000 series and later) * x11-video-fglrxG01 (for Radeon 9500 - X1900)
View 3 Replies
View Related
Sep 4, 2011
After installing OpenSuse 11.3x86_64 specifically for the ATI radeon HD 4850 proprietary driver that was created with intended compatibility from ATI, I have intense screen tearing.
View 4 Replies
View Related
Nov 22, 2009
I have the graphic card: ATI Technologies Inc RS482 [Radeon Xpress 200M] and I want to set the driver radeon because when start the ubuntu 9.10 on live cd it's use this driver. Now load the radeonfb but when set on xorg the driver "radeon" while reboot the machine not work. When start gdm the screen becomes black and I need power off and change xorg.
View 1 Replies
View Related
Jan 28, 2010
I'm running Mint Helena.The problem is that i can'd find a driver for my ti radeon x1050 card. I've tried the mesa driver and the other things similar to it but with no result.
View 1 Replies
View Related
Jan 31, 2011
I'd installed Puppy and was very happy with the performance on my laptop, but I decided to switch to Debian because of the ap-get feature. I decided to go with JWM instead of one of the default desktop environments, but now I'm having to configure everything manually, and I'm pretty lost. So far, I've got X and JWM installed (though no graphical login, and have to startx manually).
Priority one is to update the video driver and get the best performance possible. I have an ATI Mobility Radeon 7500. I know the fglrx driver doesn't work with this card, but I don't know which package to install. When I type "apt-get install radeon", it spits out "E: Couldn't find package radeon"
View 12 Replies
View Related
Feb 20, 2010
I just downloaded ATI Radeon x700 driver from Quote:[URL]..the file name is
Quote:
ati-driver-installer-9-3-x86.x86_64.run I gave permission as Executing file as program. I run as sudo from terminal but I get this error Quote: Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.31-20-generic; make sure that the version is being correctly set by --iscurrentdistro
View 1 Replies
View Related
May 13, 2010
I installed Lucid when I had my Nvidia board in the computer. Yesterday I pulled out the nvidia board and installed my new Radeon 5750. Hearing that the Open Source driver is the way to go, I first decided to try that. I edited xorg.conf replacing "nvidia" with "radeon", since this is the module name (right?) but it still doesn't seem to load. Does anyone have an example of what a properly configured xorg.conf is supposed to look like using the ATI Open Source driver? I get X up and running in "low graphics mode", but can never get beyond that.
Trying to turn on window effects causes a "searching for drivers" dialogue to appear and then disappear without success. A quick "glxinfo |grep -i render" indicates that it is indeed in the software mode. I even tried to manually modprobe the radeon module and restart GDM, but still nothing. At first I thought this was a limitation of the Open Source drivers on 5xxx series boards, but this page suggests that it should work in "gold" status. I have since installed FGLX and it is just terribly buggy, so I am hoping to use the Open Source driver.
View 5 Replies
View Related
Sep 14, 2010
I've always had and used Ubuntu. When I installed and did not like the stability of a certain version, I just reformatted the partition and used LiveCD. OK, on a virgin SATA, 300-gig partition, I installed 10.04 and that took the ATI Radeon 3rd-party graphics driver. No problem. Then, the family wanted 2 languages on the machine. The German keyboard screwed me in terminal and I wiped out Home and all their data. I used Scalpel to image-carve 300-gig onto a 400-gig partition and tried to re-install Ubuntu 10.10.
The ATI's fglrx will not install, that's the error. That same file prevents upgrades of Ubuntu to current status.
is this thread current for my problem with 10.10?
http://ubuntuforums.org/showthread.php?t=651566
Or, do I have that 400-gig with the backup cross-pollinating?
View 2 Replies
View Related
Sep 24, 2010
The last few weeks I have been dual monitoring from my lcd monitor to my hdtv. LCD was connected via vga and my tv via hdmi. To my knowledge, my pc has two graphic cards, both ATI Radeons. One I believe is on the mother board, ATI Radeon 4200HD series, and the other is in a PCI slot ATI Radeon 5600HD series. I think that when I had it dual monitored the tv was connected via 4200HD and LCD via 5600HD (could be wrong).
What I Did: Everything was working fine (i was mainly just using the HDTV as my only monitor and main monitor). As you can guess I was gaming on the hdtv, but I was not satisfied with the slight lag I felt. So I looked at forums to see what I could do and they mostly said 1) change settings on tv to game mode, 2) turn off vsync on your graphics card. So I did #1, but when I tried to do #2 I could not open my graphics cards "menu" aka CCC aka Catalyst Command Center.
So I read up on why this might happen and they said I should uninstall drivers and reinstall the drivers, so I did this as well (with most current drivers from the AMD site, version 10.9) and still I could not get into the CCC. As I was reading more forums, they were saying the 10.8 version mainly has this problem. So what I did was I downloaded 10.7 (did not install yet) and uninstalled the new 10.9. When I went to reboot the cpu after the uninstall of 10.9 there was no display on my HDTV.
I figured I just need to go back to my LCD which was still hooked up to my cpu. No display there as well. I tried dvi and vga hook ups from the monitor to both graphic cards but nothing worked to get me a display. I also tried my girlfriends monitor, which only has vga, to both graphics card and still nothing worked. So at this point I have NO display. After about an hour of trying different combinations of cords, monitors, plugs, tv's etc.,
I RANDOMLY somehow got a display with my girlfriends monitor vga to the 5600 card (I think). I had to hold the vga cord a certain way on attached to the monitor in order for the display to work. So since I had a display, I quickly installed 10.7. After installation, it did not prompt me to reboot (which I thought was weird) so I just went to properties and tried to change the resolution to the max 1600x something, to see how it looks. The screen went blank and the display never reappeared. Now I basically have NO DISPLAY again.
View 1 Replies
View Related
Feb 19, 2011
is it possible for me to get this driver for Ubuntu v 10.10? This is the only thing stopping me coming over fully from Win7 right now...
View 1 Replies
View Related
Mar 20, 2010
I just installed OpenSUSE 11.2 x86_64 on a new computer with ATI Radeon HD 5770 graphics card. I have included ati in the update repositories. I saw that x11-video-fglrxG02 and ati-fglrxG02-kmp-desktop are NOT checked, so, I selected both in YAST2, then, OpenSUSE started to download the required files. but, in the middle of downloading, I got a "wrong digest", said that ati-fglrxG02-kmp-desktop has wrong checksum.
View 4 Replies
View Related
Mar 29, 2010
I have Radeon HD 3870, which is limited to 2D purposes I understand...
Will this mean that I cannot use DRI? Will it have a performance impact in 2D applications?
Does DRI make watching movies on PC 'better'? Especially 720p ones.
View 3 Replies
View Related
