I installed nVidia by 1 click off suse site and on reboot my display is gone. I booted with failsafe Kernel. How do I get my display back with nVidia driver instead of default one.
View 9 RepliesBasically what has happened is that I have installed the nvidia drivers for a 9800 GT from the One-click install for the newer video cards. It seems to have succeeded although I am having difficult activating 3D effects. What happens is that whenever I activate Compiz settings, it works for about 2 seconds (wobbly windows is my test) and then quickly goes back to standard. Is this something I have done wrong or is my hardware incompatible? It works in other distributions I have tried so I'm assuming it is a fault on my part.
View 1 Replies View RelatedSDB: NVIDIA drivers - openSUSE says
The 1-click install repository links for the "Easy Way" and "Repository Way" will be populated after the mid-July-2010 release of openSUSE-11.3." Well 11.3 is of course out now, so anyone know where the links are? I know I could do it the 'Hard Way' and I've done it that way many times in the past. But these days I'm older and lazier and prefer the 'Easy Way'.
This morning, I authorized an update as almost every day. I saw that the nvidia driver was on the list but in recent years, I no longer fear these driver updates since everything usually works well...
Except that this time, no! I turn on my pc this afternoon and more 3d effects. I run "Nvidia X Server Settings" which tells me I do not use the nvidia driver and must run as root the command "nvidia-xconfig," what I do. I restart X and no display at all, only the prompt in text mode!
When i start the install of the open suse linux 11.2 load the kernel but later my display is in black, i think that is my graphic card becouse in other linux only load linux without graphic mode, what i have to do for install open suse?, i can download a driver with the installer or something like?
View 4 Replies View RelatedI have openSUSE11.3 KDE with the latest Nvidia binary from the Nvidia repo. I have two monitors configured and working more or less. If I configure for separate displays the secondary display has a X window with an x for a cursor. It doesn't look like that configuration is happy. If I configure for twinview I have one continuous desktop spread across two monitors. I have been using nvidia-settings to configure the displays.
What I want is for the right display to mirror the left display. How can I or can I get it to mirror? Looking in Personal Settings (Configure Desktop) doesn't show any configuration there for mirroring.
I just purchased a new notebook, namely an HP Pavilion dv6, with a GeForce GT 230M. Also, I have a neat 1920x1200 display with an HDMI connector, which fits nicely with the corresponding outlet on the computer. Now I'd like the external display to be the main display when connected, with the internal display as an expansion to the desktop, and the internal display should, obviously, be primary when on its own.
The reality looks quite different: Not too surprising, with the default drivers I got only a 800x600 resolution, but with the correct drivers installed, I got the full resolution on the integrated display. My external HDMI-display, however, is dead. With the xorg.conf file being obsolete I can't really use the configuration app by nvidia, can I?
I have no display after attempting nvidia driver install and doing telinit 3
On hitting F2 I get these errors -
Code:
Is there anyway to boot in safe mode. I boot Fedora with GRUB2 and there isnt any failsafe entry for it. I have blacklisted nv driver already.
Lucid installed without any errors that I can see of off the main i386 installation CD, but after booting I get no display. Even in recovery mode. The monitor doesn't go into sleep mode and I can tell that the OS is actually running the background because I can do a Ctrl-Alt-Del and do a proper shutdown. I'm running an nvidia GT 9500. Everything is working fine on Karmic.
View 4 Replies View Relatedi have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View RelatedI am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.
I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.
I am running Ubuntu 10.04 and ran the normal weekly updates last night. There were kernal updates listed but they have run alright before so I went ahead and let everything update.
On restart my Nvidia drivers would not load, so I restarted in low graphics mode. I uninstalled the Nvidia driver (with the intent of reinstalling them) but decided to restart before I reinstalled the driver (windows habit). upon restart I was told (in a very small box) that Ubuntu was running in low graphics mode.
I clicked ok and it proceeded to load, but it loaded it in regular mode and only the right half of the desktop is visible! It is like it is cut totally in half! And I can't get to the important side with Admin and Preferences. I tried boot options but that just gets me a very small colored box. There are no options when it boots just 3/4 of a box that says it is running in low graphics mode because "unable to load module "fglrx" module does not exist". I can not try and reinstall the Nvidia drivers because I can't see the part of the desktop that has Admin on it. I have used Ubuntu for several years now but have not used the terminal very often.
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
How can I fix the display settings?
I have a bit of a problem with the proprietary nvidia driver which I installed as a binary on suse 11.3, when I run the nvidia-settings gui it does not give any widescreen display modes as options. My monitor is an Acer x193w which will do 1440x900 but there is no option for that. The monitor is just listed as a generic CRT, and only 4x3 display modes are given. My card is a PNY Geforce 6200 AGP 512MB.
View 9 Replies View RelatedI went back to Suse 11.2, it comes with the 'nv' driver for my NVIDIA Quadro2 Pro (64 MB) and I'm getting some slow performance on browser display and sometimes video playing. Not always, I recently saw a 2 hr long movie on Blue Ray resolution, so the problem is not hardware, it's software. I saw several links here on how to install other drivers and a 1-click install link on this page but my question is, since this is an old card... which driver is the best for this card ?
View 9 Replies View RelatedRecently installed OpenSuse 11.3 on my system, Setup dual monitors w/ the latest Nvidia driver from Yast repo : download.nvidia.com
Initially twin view ( same desktop viewed on both monitors ) worked no problem
Once xinorama was enabled to extend the one desktop across both I encountered a mouse issue.
Main monitor is on the right, 2ndary on the left... When I drag the mouse from the right monitor over to the lest.. the cursor appears to get stuck on the left monitor's right hand edge.. it flickers as i move it around...
If I drag the mouse to the right a few whole mousepad lengths it will come back to the right...its like fighting to bring it back..
xserver-common (2:1.10.4-1) was upgrade today in Sid to xserver-common (2:1.11.0-1) breaking my nvidia driver (NVIDIA-Linux-x86_64-280.13.run). There is a temporary fix as showen below.
Section "ServerFlags"
Option "IgnoreABI" "true"
EndSection
Some problems do exist and downgrading may be a better option.
I need to look at bugreports at nividia but not sure how. LOL guess it's time to google.
I was having a problem with cairo dock, asked on the board how to resolve was told to reinstall the visual driver for my monitor since I have an ati vid card since with the updated kernal u have to reinstall those drivers(didn't know that, I'm new to opensuse). I thought I did that before so I completely uninstalled it so I could then do a fresh reinstall but I wasn't paying attention and my laptop was unplugged for a while. I stepped away while the install was going on and my laptop died.
I tried plugging it in but had to restart my laptop when I did I got the command line rows and when I tried to start GDM it wouldn't start, I did so as SU. Attempted to connect to the internet via networkmanager and couldn't get wifi or wired to work. Anyway I can access my desktop visually just so I can start yast and install the driver or will I have to reinstall 11.2 or use the cd to repair? If so how do I use the cd to repair?
How can I install Mplayer for openSUSE 11.3 x86_64 The 1 click install from packman is not working and the download install is asking for libopencore-amrnb.so.0 but llibopencore-amrnb0(x86-64) = 0.1.2-1.pm.3.1 is installed
View 9 Replies View RelatedIv tried everything to install the codecs for my system, the one click install, the manual provided for by openSUSE but no luck. All the files were installed correctly but alas no file will play. I need a solid answer. I have 11.2 GNOME on a 32 bit processor
View 9 Replies View Relatedwhere can I change the single click into a double click (because I'm a windows user (sorry!))? The mouse model does not support this.
View 4 Replies View RelatedI downloaded a ymp 1-click install file but clicking it just opens it in Konqueror and displays description and URLs. What am I doing wrong?
View 6 Replies View RelatedI'm using OpenSuse 11.3 Gnome I'm having trouble installing new packages from the One Click Installs of Software Open Suse and from Packman. I get the following error each time.The install link or file you opened does not contain instructions for this version of openSUSE.
Having done a new install of Open Suse 11.3 I'm trying to get back to using Mplayer and Cairo-dock, just to mention two packages. Is the version 11.3 still too new, or is there a fault in the auto installs of 11.3? I have managed to download the rpm of Cairo-dock but the Cairo-dock-plugins have dependency problems which I presume should be resolved using the One Click Install - when it works.
Datacrow installed from one click install for openSuse 11.2Problem: can't open image file.message: 02:37:52 - An error occured while reading the image02:37:52 - javax.imageio.IIOException: Invalid argument to native writeImage
View 1 Replies View RelatedHow do create I customized 1-click-install, with browsers, players,broadcom,kernel-vanilha, specific kernel version, gtk-aurora, virtualbox...? I actually install via terminal, but a 1-click-install will be more smoothly.
View 2 Replies View Relatedjust recently installed 11.2. WOrking good. Would like to upgrade to KDE 4.3.5. However, when I do, I get all these messages. Im using the one click installer.kdebase4-nsplugin-4.3.1-5.6.3.x86_64 requires kdebase4 = 4.3.1, but this requirement cannot be provided
[ ] do not install kdebase4-4.3.5-3.3.x86_64
[ ] break kdebase4-nsplugin by ignoring some of its dependencies
[ ] Following actions will be done:
[code]....
as it says in the title
View 9 Replies View RelatedWhen installing COMPIZ on KDE 4.3.5 and Opensuse 11.2 64 bit, I get the following error message: "compiz-kde4-0.8.4-167.x86_64 requires compiz = 0.84, but this requirement cannot be fulfilled. Is there any way to resolve this issue, and is the problem missing repos?
View 3 Replies View RelatedThere doesn't seem to be a one-click install on KDEs page for 4.4.4 only 4.4.3. Does anyone know if there is going to be one for 11.2 or is Suse targeting 11.3 ?
View 9 Replies View RelatedI tried searching for these two apps but I can't find a 1-click install anyplace? Is it possible to install these two apps w/o a 1 click?
View 1 Replies View Related