How can I install Mplayer for openSUSE 11.3 x86_64 The 1 click install from packman is not working and the download install is asking for libopencore-amrnb.so.0 but llibopencore-amrnb0(x86-64) = 0.1.2-1.pm.3.1 is installed
View 9 RepliesI can't install gnome-mplayer on my openSUSE 11.2 I used the " 1-click insall" I also tried manully installation, got below errors # rpm -ivh gnome-mplayer-0.9.9.2-9.1.x86_64.rpm gnome-mplayer-lang-0.9.9.2-9.1.noarch.rpm error: Failed dependencies: MPlayer is needed by gnome-mplayer-0.9.9.2-9.1.x86_64 libmusicbrainz3.so.6()(64bit) is needed by gnome-mplayer-0.9.9.2-9.1.x86_64
View 4 Replies View RelatedI've noticed the Packman mplayer's ffvorbis doesn't seem to be working on 11.2 (x86)-any vorbis seems to be decoded as very quiet noise that roughly matches the sound that ought to be made. Audio output (-ao) doesn't make any difference, and I've the same problem on three different machines. Xine, vlc, ffplay, etc. all work, as does -afm tremor (the reference decoder) with mplayer. The verbose output from mplayer seems to be the same between these systems and an older 11.0 system with a not-very-recently-upgraded version of mplayer. Unfortunately, packman does not keep old versions of packages, and compiling mplayer is somewhat of a chore, so it is not immediately easy to test an old version of MPlayer on 11.2 for me.
I'm using the samples from Vorbis.com: Music to test with, so I assume there is nothing peculiar about the files.
Is anyone successfully using current (1.0rc2_r29796) Packman MPlayer to play either vorbis .oggs or video with vorbis audio on 11.2? If so, was it a fresh install or an upgrade system? Architecture? Etc.-I've run out of machines to easily test on, and it doesn't work on any of them.
I realize that this is better-addressed to the Packman mailing list, but very few users seem to read it, and for whatever reason, the packagers never seem to have any problems with their own packages (even when they are clearly broken for many others); so I thought I would give it a try here first.
I was updating the files I have from packman on my test box and got security warning on mplayer and gixine. I switched mirrors and got the same checksum errors on a totally different mirror except I was not re-offered mplayer once I refused it the first time.
View 9 Replies View RelatedI'm using OpenSuse 11.3 Gnome I'm having trouble installing new packages from the One Click Installs of Software Open Suse and from Packman. I get the following error each time.The install link or file you opened does not contain instructions for this version of openSUSE.
Having done a new install of Open Suse 11.3 I'm trying to get back to using Mplayer and Cairo-dock, just to mention two packages. Is the version 11.3 still too new, or is there a fault in the auto installs of 11.3? I have managed to download the rpm of Cairo-dock but the Cairo-dock-plugins have dependency problems which I presume should be resolved using the One Click Install - when it works.
am running suse 11.2, trying to install packman repo.but when i open software repositories then the software manager comes up i select specify url, then add packman then the url to packman i get an error that the url is wrong. what is the right url to packman. the one i found and was using is "http://packman.mirrors.skynet" is this right or wrong?
View 5 Replies View RelatedTried about every repo, listed on Additional package repositories - openSUSE but all give the same permission denied problem on some repom.xml and fail to add the repo.I want to install lame, on suse 11.0.
View 1 Replies View RelatedOkay I finally decided to install openSUSE and I have a few questions. First and biggest, how do I add the packman repository as one repo? and will doing so add tumbleweed?
View 9 Replies View RelatedI'm new to opensuse, just installed 11.2 and added the packman repository to the software repositories list, and now when i open the yast software manager there are about a dozen selected packages to install, mostly related to multimedia like ffmpeg ,faac,faad and python-beanutils. I didn't want that, why does it happen? and how can i disable it?
View 5 Replies View RelatedI recently download the new 11.3 suse. I Install from the cd, and choose the update option to make it all auto-.Now I Found out that I have no Mozilla repository, Packman repository, OpenOffice one, as well as others. Then I go the repositories packages screen that repositories aren't displayed. Where can I found them ?What's new on this website that take those repositories apart ?
View 3 Replies View Relatedim trying to do a zypper update for opensuse 11.1 and i get an error from the packman (essentials) repo,
it says that i can't find ./i586/libgupnp-1_0-3-0.13.0-3.2.i586.rpm in Index of /pub/linux/misc/packman/suse/11.1/Essentials
but I've checked and It IS there.I paste the complete error below.
[Code]...
Trying to clean up my system having removed some factory repos so now I have the standard 4, update, oss, non-oss & packman. When updating and switchine to packman I get many Wrong Digest errors and when downloading many NO KEY messages.
What is the significance of the no key message. How can I renew keys from repo sites and what should I do about the Wrong Digest warnings?
With zypper refresh I get this Repository 'openSUSE-11.4-Debug' is up to date. Repository 'openSUSE-11.4-Non-Oss' is up to date. Repository 'openSUSE-11.4-Oss' is up to date. Repository 'openSUSE-11.4-Update' is up to date. Retrieving repository 'libdvdcss' metadata [error] Repository 'libdvdcss' is invalid. Download (curl) error for 'http://opensuse-guide.org/repo/11.4/content': Error code: Connection failed Error message: Couldn't resolve host 'opensuse-guide.org' Retrieving repository 'packman' metadata [error] Repository 'packman' is invalid. Download (curl) error for 'http://packman.inode.at/suse/openSUSE_11.4/content': Error code: Connection failed Error message: Couldn't resolve host 'packman.inode.at'
I was able to add other repos and install applications and upgrades (new install Gnome 11.4 64 bit on friends laptop), and Packman and Video lan are the only repos I can't refresh, any ideas?
I was thinking of trying out the UEFI support that HP has in my laptop BIOS in the next few days. My reasons is that I get a custom boot logo... and (hopefully) a better boot-speed. What is the current state of affairs with the openSuSE UEFI/EFI install support on a empty hdd for x86_64 does anyone know? (badly worded I apologize) This may seem naive but I have struggled to answer this with most posts being about Mac's for obvious reasons.
Specifically, Do I have to have any custom knowledge on formatting the HDD with a GPT partitions or does the installer do this for you? Secondly, How well does the UEFI bootloader tie in with the config tools in YaST2? (I would like to have UEFI but if it turns into some headache in setting up the boot area by hand each time the kernel updates I will forget it.) I can safely say this will be a machine with only openSuSE installed as an OS, no need for any others or any dual-boot problems. This isn't overly urgent and I will dedicate (at least) a whole weekend to tweaking once I buy a new disk and install openSuSE on it. If nobody knows then I will dive in head first and report how I find it and any problems (and severity).
I install Mplayer from Install/Remove Software and I can't find it. I reinstall it but without any success.
View 9 Replies View RelatedIv tried everything to install the codecs for my system, the one click install, the manual provided for by openSUSE but no luck. All the files were installed correctly but alas no file will play. I need a solid answer. I have 11.2 GNOME on a 32 bit processor
View 9 Replies View Relatedjust recently installed 11.2. WOrking good. Would like to upgrade to KDE 4.3.5. However, when I do, I get all these messages. Im using the one click installer.kdebase4-nsplugin-4.3.1-5.6.3.x86_64 requires kdebase4 = 4.3.1, but this requirement cannot be provided
[ ] do not install kdebase4-4.3.5-3.3.x86_64
[ ] break kdebase4-nsplugin by ignoring some of its dependencies
[ ] Following actions will be done:
[code]....
as it says in the title
View 9 Replies View RelatedI just upgraded from 11.2 to 11.4 and the installation/upgrade worked just perfect. I than followed the instructions in the "New User How To/FAQ", "Multimedia and restricted format" post. I was following the instruction in the 11.4 section. I added the additional repositories as explained. I then was on the section where it talks about going into software management and selecting the "Packman" repository and clicking to "switch systems packages" to the versions in this repository (packman). I than click this link and the "warning" screen appears and I am present with conflict resolution after conflict resolution dialog. It just seems that there are some many conflicts, it just seems wrong and I canceled.
The installation/upgrade appears to have worked just fine. My mail is there, audio and dvd play back worked the first try after the upgrade. I am not clear if this is what I should expect or their is something wrong or if I even need to complete this step for a successfully installation.
I have attempted to install Mplayer on my recently upgraded opensuse. It states nothing provides libjpeg.so.62(LIBJPEG_6.2)(64Bit) needed by Mplayer-1.0rc4_r33030-1.pm.1.3.x86_64 With the options of Do not install Mplayer-1.0rc4_r33030-1.pm.1.3.x86_64 OR Break MPlayer by ignoring some of its dependencies. I do not want either of these options, rather I want to just have the option to install it.
The repositories I have ticked are the following
opensuse 11.4 OSS
opensuse 11.4 Updates
Packman Repository
ReDwarf
Opensuse 11.4 NOn OSS.
how I can resolve this dependency issue / install the software?
Running 'zypper install lvm2-clvm' results in a message: Resolving package dependencies... Problem: nothing provides libcpg.so.2()(64bit) needed by lvm2-clvm-2.02.45-16.2.x86_64 Solution 1: do not install lvm2-clvm-2.02.45-16.2.x86_64 Solution 2: break lvm2-clvm by ignoring some of its dependencies So it cannot find the cpg library, which appears to be a part of openais (if I believe google). I have configured the following repositories:
[Code]....
What could be the problem here? Am I just missing a repository or is cluster LVM not supported on opensuse 11.3?
I am trying to install gnome mplayer and later mplayer codecs.script run
Code:
root@zorro:/home/siawacsh/Downloads/MPlayer/mplayer/slackbuild/gnome-mplayer# ./gnome-mplayer.SlackBuild
gnome-mplayer-0.9.8/
[code]....
I tried installing the RPM from tcpflow website. error: Failed dependencies: libpcap.so.0.6.2 is needed by tcpflow-0.21-1.i386 I installed libpcap1-32bit, but doesn't help. I tried added soft-link to libpcap.so.1.0.0 from libpcap.so.0.6.2 to workaround, doesn't help. hen I DLed the tarball, ./configure gives an error, even after including --with-pcap=/usr/lib64/libpcap.so.1.0.0 checking for --with-pcap option... configure: error: /usr/lib64/libpcap.so.1.0.0 does not exist I CAN'T install the rpm, I CAN't compile from source. I can't find this program on any suse repo. I need to use this prog -- what can I do?
View 14 Replies View RelatedI downloaded a ymp 1-click install file but clicking it just opens it in Konqueror and displays description and URLs. What am I doing wrong?
View 6 Replies View RelatedYesterday I applied the su security patch to my openSuSE 11.2 x86_64 system.After applying the patch, any attempt at su failed, and after rebooting the system earlier this morning any login (root, user, otherwise) fails with a "Permission Denied".Is it possible that the su update somehow messed up my (standard) pam settings?
View 10 Replies View RelatedI've trouble compiling libeio on my openSUSE 11.4 x86_64:
[Code]...
Datacrow installed from one click install for openSuse 11.2Problem: can't open image file.message: 02:37:52 - An error occured while reading the image02:37:52 - javax.imageio.IIOException: Invalid argument to native writeImage
View 1 Replies View RelatedHow do create I customized 1-click-install, with browsers, players,broadcom,kernel-vanilha, specific kernel version, gtk-aurora, virtualbox...? I actually install via terminal, but a 1-click-install will be more smoothly.
View 2 Replies View RelatedWhen installing COMPIZ on KDE 4.3.5 and Opensuse 11.2 64 bit, I get the following error message: "compiz-kde4-0.8.4-167.x86_64 requires compiz = 0.84, but this requirement cannot be fulfilled. Is there any way to resolve this issue, and is the problem missing repos?
View 3 Replies View RelatedThere doesn't seem to be a one-click install on KDEs page for 4.4.4 only 4.4.3. Does anyone know if there is going to be one for 11.2 or is Suse targeting 11.3 ?
View 9 Replies View Related