Fedora :: Removing Ati-driver-installer-11-5-x86.x86_64.run From 15?

Jun 5, 2011

how can i remove this driver ati-driver-installer-11-5-x86.x86_64.run from fedora 15 ? I cant seem to find the un-installer any where..

View 4 Replies


ADVERTISEMENT

Software :: Fedora 14 X86_64 No Sound After Removing Alsa-driver-linuxant?

Apr 14, 2011

Months ago, I tried to get my notebook's internal modem working, by installing alsa-driver-linuxant-1.0.23.1-1.noarch.rpm and hsfmodem-7.80.02.06x86_64full-1.x86_64.rpm, both from Linuxant. This did not work, but my system was stable and the sound device (Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)) worked fine.In the last few days, I upgraded to the latest kernel 2.6.35.12-88.fc14.x86_64. Boot failed due to an inability to build the alsa-driver-linuxant against the kernel source (I have the kernel source in /usr/src/kernels/2.6.35.12-88.fc14.x86_64/). The message in boot.log was:

Code:
ERROR: Build failed. Please review the build log at /var/run/alsa-driver.1367.log.
/var/run/alsa-driver.1367.log contains the error:

[code]....

View 4 Replies View Related

Fedora :: Removing Duplicate I386 Packages On A X86_64 System After A Pre-Upgrade From FC8-FC10

Oct 19, 2009

I recently upgraded my x86_64 system from FC8 to FC10 using Pre-Upgrade. (related blog link) It appears that the upgrade process installed a steaming pile of i386 packages that are duplicates of existing x86_64 packages. I now get update errors because of this package clash. I have searched the fora and the most progress I've been able to make so far is: I apparently had 8 unfinished yum transactions so I did yum-complete-transaction 8 times and have no more incomplete transactions.

The output of package-cleanup --dupes is not very helpful:

Code:

[tim@servy ~]$ sudo package-cleanup --dupes
Setting up yum
Loaded plugins: refresh-packagekit

Yet I still get transaction errors when I run updates via synaptic. It checks dependencies and downloads everything and errs when testing changes. This is the error it gives at the moment:

Code:

Test Transaction Errors: file /etc/gconf/schemas/gweather.schemas from install of libgweather-2.24.2-1.fc10.x86_64 conflicts with file from package gnome-applets-1:2.20.1-1.fc8.i386

[code]...

View 14 Replies View Related

Fedora :: NVidia Driver For New Kernel 2.6.35.12-88.fc14.x86_64?

Apr 12, 2011

I just responded to a (packagekit?) prompt to update packages, which included new kernel 2.6.35.12-88.fc14.x86_64. I use nVidia on my notebook and usually the new driver is installed automatically. This time, the computer would not boot to the stage that the nVidia logo appears, indicating the driver is not present. I edited grub.conf to take me back a version and I am now running under the previous kernel 2.6.35.11-83.fc14.x86_64. I tried a yum search for kmod-nvidia-2.6.35.12-88.fc14.x86_64 and nothing was found. I have enabled these repos:

[Code]...

View 4 Replies View Related

Fedora Installation :: Software Update - Fedora (2.6.34.6-47.fc13.x86_64) - Nvidia Driver Doesn't Work

Sep 1, 2010

Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:

Code:

Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored

[code]....

I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?

Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?

View 5 Replies View Related

Fedora Networking :: Kernel 2.6.35.10-74.fc14.x86_64, E1000e Driver 1.0.2-k4 Still Had Bugs?

Feb 11, 2011

I just built some machines with the Intel 82574L gigabit ethernet chip, loaded Fedora 14, and discovered a problem with the e1000e driver dying after a few minutes. A little time spent perusing the web told me that the same driver had problems in Fedora 12 and Fedora 13 as well. Congrats to Fedora for the hat trick.As of kernel 2.6.35.10-74.fc14.x86_64, e1000e driver 1.0.2-k4 still had bugs.[URL]

View 6 Replies View Related

Fedora Hardware :: Possible For Plymouth To Work With ATI Catalyst Driver Installed In F15 X86_64?

Jul 11, 2011

Is it possible for plymouth to work with the ATI Catalyst driver installed in Fedora 15 x86_64?

Is it that plymouth requires KMS and Catalyst doesn't provide it? With the nvidia driver, I could put a vga= line in grub and plymouth would run. Is there something similar for catalyst?

View 3 Replies View Related

Fedora Installation :: Install An Ati Video Card Driver - You Need To Run This Installer As The Super-user"

Aug 27, 2010

I'm trying to install an ati video card driver, but can't seem to get past this (see screenie)

When I click okay, I expected a prompt to put in my password, but everything just closes.

View 2 Replies View Related

Fedora :: Removing Notifications And Safely Removing Drives?

Aug 25, 2010

These should be my last pleas for help with regard to Fedora 13. I've been unable to turn off the notifications that appear in the top right corner, despite a decent amount of searching on google. I can't remove any notifications package without removing a bunch of important software along with it. Also, F13 refuses to "Safely Remove" either of my external disks. I have to yank out the usb cord, touching wood each time.

View 5 Replies View Related

OpenSUSE Hardware :: ATI Driver Doesn't Work On 11.3 X86_64?

Jul 27, 2010

I've got a ATI graphic card, which is not a Radeon bla bla, and it is a Fire Pro MV 2260. I download the official driver from ATI(AMD) website, and it gives me:

'firepro_8.723-linux_98794.zip'and unzip will produce 'fglrx-8.723'

I change the things according to this thread:

openSUSE Lizards ATI HD57xxx fglrx drivers under 11.3

However, after installation I can't start X. The log shows the kernal doesn't match.

Then I try to install the ATI Catalyst 10.7. It won't start X as well. I think maybe ATI Catalyst 10.7 is particular designed for Radeon, isn't it?

BTW, why there is no entry for 11.3 at:

Additional package repositories - openSUSE

NVIDIA drivers is updated, but ATI seems very lazy...

View 9 Replies View Related

Slackware :: Proprietary Nvidia Driver Crashes - 13 X86_64

Jan 23, 2010

I'm having an issue where the proprietary nvidia driver seems to crash my system. the weird thing is that it only happens if i have already started an X session. here is what i mean. i don't use a display manager so i invoke X by running startx. now if i run it for the first time it starts no problem. but if i kill X with ctrl-alt-backspace and then try to run startx again it just hangs and the machine completely freezes up. this only happens with the proprietary nvidia driver. if i use the vesa driver it works fine. the open-source nvidia driver doesn't seem to support my card: GeForce GT220. i never had this problem with slackware 13 x86. i have tried using the 190.42 version from slackbuilds.org as well as the latest version from nvidia's site 190.53. aside from this problem it seems to work fine otherwise.

View 14 Replies View Related

OpenSUSE Hardware :: Canon LBB5100 Capt Driver X86_64 ?

Mar 11, 2009

1st. I still haven't got a reliable working printer driver direct on linux.

2nd. I am currently using the driver via smb to a windows box.

Okay there is no x86_64 driver for the capt drivers, that I could find. But you can download the standard linux drivers, which also contain the source.

The easiest way to get a 64bit driver is to unpack the drivers.

You will find a directory Src. In there are two source packages.

Copy both to /usr/src/packages/SOURCE

unpack both in a temporary directory.

I can't say which other packages you need to compile and build all of this, but you will need the c++ compilers, and various -devel packages. I would just add them via yast as you go along.

Anyway off to work out how to get this working directly on linux reliably.

View 9 Replies View Related

CentOS 5 Server :: X86_64 Xen Xm Create Cannot Find Device Driver?

Apr 27, 2009

I am trying to create a xen vm on CentOs 5.3 using the following config file:

name = "vm5"
maxmem = 512
memory = 512
vcpus = 1

[Code]...

I'm assuming that it can't find a driver for a cdrom - but I am not too sure of that.

View 4 Replies View Related

Ubuntu :: Removing The Nouveau Driver?

Jun 16, 2010

I installed the nVidia 3rd party driver before removing the Nouveau Driver, this means that when my computer is done booting i'll just have a black screen, being able to do nothing. Can i somehow solve this using a live CD? or is there a simpler way? Ubuntu can't boot in recovery mode neither, so it kinda sucks. Anyway, i'd like someone to tell me how to do this.

View 9 Replies View Related

OpenSUSE Network :: Unable To Acquire IP Address Over DHCP With Ipheth Driver In 11.4 X86_64?

Jun 14, 2011

Although Im using SuSE since 7.2 this is my first forum post here. I just plugged in my iPhone with USB and 11.4 created an eth1 interface for the iPhone and also loads the ipheth kernel module. Anyhow I am not able to acquire an IP address using DHCP. The iPhone OS is 4.2.1 and its an iPhone 3G 8GB black

View 2 Replies View Related

Ubuntu Multimedia :: Catalyst X86_64 Driver For Radeon 4850 Install Failing?

May 2, 2011

I realize that Canonical is not responsible for the Catalyst driver, but I can't seem to operate outside of the Ubuntu Classic (no effects) mode for 64 bit Natty, and I was curius if anyone else had encountered or resolved this.

When I upgraded from 10.10 (I was using the fglrx package), xorg would immediately crash. I was able to reach the gdm screen only using recovery mode. I uninstalled the fglrx package, and now I can boot into Ubuntu Classic (no effects) mode only (no other desktop will work) using the open-source driver at no greater than 1280x1024.

When I try to re-install the catalyst driver using aptitude or Administration->Additional Drivers, the installation fails:

(jockey.log: WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx)

Similarly, package generation from the AMD page fails:

Installation complete.
*** glibc detected *** ./setup.data/bin/x86_64/setup: double free or corruption (fasttop): 0x000000000259f630 ***
======= Backtrace: =========

[Code].....

View 5 Replies View Related

Ubuntu :: Hardware Driver Installer Won't Work?

Oct 4, 2010

I got fed up with trying to install from an nvidia binary, so I decided to move my entire computer to connect it to the net temporarily. However, just to torment me further, hardware drivers won't work due to a seemingly irrelevant 404.

View 4 Replies View Related

Debian Hardware :: Will A Net-install Work (driver Already In Installer)?

Jul 5, 2010

I'm new to debian and have just installed release 500(lenny?) on this netbook. The onboard atheros wlan was neither detected nor its driver installed. I was thinking maybe NET-installalling the 'test' version in hopes that that will do it. Will a net-install work (driver already in installer)?

View 3 Replies View Related

Ubuntu :: Can't Enable Desktop Effects After Removing Old Driver?

Aug 28, 2010

I've got an ati x1270 in my laptop and removed the fglxr driver and now I can't enable desktop effects and the preinstalled driver clearly isn't working and I don't really want to reinstall ubuntu AGAIN. I'm getting tired of it. I wouldn't have removed the driver except that I think it was effecting my booting because I was booting to a blank screen (and it wasn't my ram)

View 4 Replies View Related

OpenSUSE :: 11.3 X86_64 Compile - Not Recognized Configure: Error: /bin/sh ./config.sub X86_64-unknown-linux- Failed

Aug 3, 2010

Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed

I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.

View 5 Replies View Related

Server :: Ethernet Driver Not Detected In SUSE Linux Server 10.2 SP2 (x86_64)?

Nov 13, 2010

i had installed open suse linux enterprise server 10.2 SP2 (x86_64) i successfully installed the operating system with adding more packages, but after going inside i cannot configure ethernet, though i have 2 ethernet ports, no ports has been found, i installed some drivers but i cannot found the ethernet , while giving command ifconfig i get this ,

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1

[code]....

how i need to detect the ethernet card i updated more packages and configured network card but not connected...

View 2 Replies View Related

Ubuntu Installation :: NVIDIA 256.35 (x86_64) Driver Installation

Jul 21, 2010

I would like to know if anyone has installed the latest NVIDIA driver on Ubuntu 10.04 (64-bit) which is 256.35 (x86_64).

I am currently having some problem (unstable) with the previous release 195.36.31 (x86_64) and am now considering updating; but, am still reluctant because of possible problems during the installation process.

View 6 Replies View Related

Debian Multimedia :: Removing Epiphany Without Removing Half The System?

May 31, 2011

I know a bunch of commands and I am comfortable using the terminal, I even set a powerpc server but I can't figure out how to remove epiphany on this new computer I'm setting up. I didn't install anything with tasksel. I installed gnome and xorg afterwards... I load it up and 'startx' just fine. then I check around for the programs that were installed. I lik'em gimp, lot's of utilities. gedit. anyway I find epiphany, which I have already established that I dislike, I immediately go to the root terminal (another nice program that comes with gnome) and type apt-get remove epiphany-browser-data the output says it will be deleting gnome... however I have researched and found these are simpy meta packages that don't really matter.... however under the section that states all the packages that will be removed by autoremove there is a huge list... I doubt these packages are safe to remove. how to remove epiphany without removing a huge amount of probably needed software

View 14 Replies View Related

Ubuntu Installation :: Removing Evolution From Synaptic Vs Just Removing The Applet

Feb 27, 2011

what i did was, remove evolution mail from synaptic, what i wanted to do was just remove the indicator applet from the task bar. i read a bunch of bad stuff about removing evolution from synaptic vs just removing the applet.

im worried. did i break anything or put my security at risk. after, i used a command (older) (sudo apt-get install ubuntu-desktop)to install ubuntu desktop. because i thought that it would fix evolution. then i went to synaptic and installed a package called evolution. i rechecked evolution in applications menu. however, i notice that i have both a checkable evolution and two evolution icons. nothing 'seems' broken. im not sure if it ever was. and evolution calender pops up as normal, as does the the installed plain evolution. they both seems to be an exact copy of the other.

all i really wanted to do was remove the indicator applet. did i make a serious mistake. since ive had ubuntu, ive reformatted a lot because i was worried i made a mistake of some kind. however now im into the more "make a mistake and fix it stage' as im pretty happy with my current desktop and have worked hard to customize it. the command, sudo apt-get remove indicator-messages removed the mail icon. i still am worried that i broke something, or put my security at risk. also, now i have two mail icons. evolution mail and calendar, and another just called evolution.

View 1 Replies View Related

Fedora X86/64bit :: Cannot Update Kernel (Fedora 10 X86_64)

May 31, 2009

Keep trying update the packages (36 in total) and every time I keep getting this error
ERROR with rpm_check_debug vs depsolve:
kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64
kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64
Please report this error at [URL]

View 2 Replies View Related

Fedora :: Glibc-common On X86_64?

Jun 17, 2009

I use FC 10 on my desktop. It is great!. But I have some troubles with installing new software via yum or rpm. Most of install/update/upgrade transactions fail. The yum prints string: Error: Missing Dependency: glibc-common = 2.9-2 is needed by package glibc-2.9-2.x86_64 (installed) I tried to manually install or update the glibc-common via yum or rpm, but it fails. The # uname -a -i -p returns

Code:
Linux achfc10 2.6.27.5-117.fc10.x86_64 #1 SMP Tue Nov 18 11:58:53 EST 2008 x86_64 x86_64 x86_64 GNU/Linux Could you have any ideas how to solve the issue?

View 8 Replies View Related

Fedora :: X86_64 Rpm For Gnome-globalmenu?

Jun 26, 2009

Bit of a shot in the dark, but I don't suppose that anyone has/knows of an x86_64 rpm for Gnome-globalmenu? Compiling the source is proving to be a real pain

View 3 Replies View Related

Fedora :: Cannot Boot Into 2.6.29.6-217.2.7.fc11.x86_64?

Sep 9, 2009

I was on version 2.6.29.6-217.2.3.fc11.x86_64 and it asked me to update so I did. When I restarted I chose this version to install and after a brief loading screen it goes to a black screen with a cursor prompt and pretty much stays there. So I go back to 2.6.29.6-217.2.3.fc11.x86_64 which boots up just fine. But after a while I get some updates that won't install because it says that Packages are not compatible:Install - Linux Kernal 2.6.30.5-43.fc11(x86_64)

ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.19-170.2.35.fc10.x86_64 is needed by kmod-nvidia-2.6.27.19-170.2.35.fc10.x86_64-180.29-1.fc10.1.x86_64

[code]....

View 1 Replies View Related

Fedora :: CD/ DVD Burning 2.6.32.9-70.fc12.x86_64

Mar 23, 2010

I have been unable to burn CD's / DVD's while logged into FC12 with a full GDM session or with just the Gnome Greeter running. If I drop to single user mode and use wodim I can burn w/o issue.

GDM 2.28.2
KERNEL 2.6.32.9-70.fc12.x86_64

View 3 Replies View Related

Fedora :: Banshee 1.6 And - 12 X86_64 /home Is On Nfs

May 11, 2010

I am having problems with then new banshee. It won't start.

I tried

Code:

No go

I still get the following error:

Code:

Runnig under root gives no problem and the previous version ran without problems.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved