I have been using Linux for a while but I am more used to Debian based distributions. With distributions like Ubuntu, I have been able to get my flash drives to work instantly. However, I have no idea how to mount one in OpenSuse. I do not have much experience in configuring stuff like this because distros usually do this for me.
View 1 RepliesI recently upgraded to Gnome 2.30 and now usb drives don't auto-mount and show-up in Nautilus as a device.
I can mount the drive manually, but it would be nice if this happened automatically when I plugged it in.
Its annoying to unmount my flash drive twice.. its not a major problem actually but its kinda annoying , its whenever i plug-in my flash drive.. everything works well except when i need to un-mount it.. I usually unmount it twice using right-click of the mouse, then it mounts itself back, so i have to unmount it again.. Is there any way to control this? How do i setup the auto-mount option for USB flash drives?
View 1 Replies View RelatedHaving a problem mounting a flash drive on slackware 13.0
tried using command: mount /dev/sdb1 /mnt/hd
Geting an error special device does not exist. sda1 is my hdd, also tried sdc sdd
i bought i 32gb transcend flashdrive mainly to t0 another os.. but the problem is it doesnt mount in ubuntu 10.10 but is mounts in windows. when i type lsusb in my terminal after inserting ang again after removing it i see that there is one usb device which is shown when flash drive is inserted and dissapears when i remove my flash drive
View 9 Replies View RelatedMy Fedora does not auto detect a flash drive if I get to attach it with the OS already running. I still have to make a reboot and attached the drive right from the start in order for it to be detected/mounted.
Unlike In Mint 7, Ubuntu and XP, it automatically detects the flash drive as soon as it is attached.
make my Fedora detect the flash drive so that I would not have to reboot everytime I would use it.
FWIW here are some outputs:
Code: # /etc/fstab
# Created by anaconda on Thu Feb 4 06:06:47 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code].....
I wish to gain access to a USB flash drive. It is old and I forget how small. Could somebody give me insight into a way to mount it if the security code isn't letting me access it via /dev/sdx?
Code:
I had to unmount a flash drive in GParted to format it, now I want to mount it again so I can use it, GParted does not get me a "mount" option and it does not automatically mount. How do I mount it so I can use it to make a Fedora Live USB? I am using Fedora 14 KDE BTW...
View 6 Replies View RelatedI've found some older threads with the same problem and read a few bug reports also. Nobody has a solution that has worked for me.How can I get Ubuntu 10.10 to be able to use something as basic as a usb drive?
View 5 Replies View RelatedI have Mandriva 08 and I can't get a MP3 player or a Flash Drive to mount. If I manually mount the Flash drive the "Computer File" won't create a file so I can access it. I get no desktop icons and I have checked the box in "config-whatever", The Flash Drive will appear in HardDrake but the MP3 player will not. The MP3 player will appear in the "Computer File" but will not manually mount.
View 2 Replies View RelatedUsb flash drive mount point not found.
see screenshot.
I'd like to make regular backups of my flash drives, but I don't plug them in regularly. Because of this, I can't just use a scheduled backup application to back them up. Does anyone know of an incremental backup application that will automatically run backups on media as soon as it's mounted?
View 1 Replies View RelatedI am trying to setup my ubuntu machine to automatically log some data I am trying to collect and write the data to a flash drive. I have everything setup so that when the machine boots up it starts that logging process. The problem I am having is that sometimes (not always) ubuntu creates a directory with the same path that I expect my flash drive to mount to i.e., /media/data/ then my flash drive instead mounts to /media/data_/. I need to know the path of the flash drive so I can store my data on it.
View 2 Replies View RelatedI'm a NOOB to CentOS and Linux in general. I've been trying to find a way to mount my USB flash drive (FAT32) so I can see my files. I've been told that I need to add a USB controller. My CentOS is running as a VMWARE guest in WS7 loaded on a Vista host. My physical hardware is a Toshiba Satellite notebook. I've been told I have to add a USB controller before I can mount. Can anybody give me some direction with this?
View 5 Replies View RelatedI have two questions regarding auto mount function of Truecrypt. First question:
I want to automatically mount my flash drive encrypted by Truecrypt using a keyfile whenever I plug the drive. How can I do this? I use Ubuntu 10.10.
Second question:
As I do not know the answer of my first question, I currently use following command in a startup script to mount my encrypted flash drive automatically at every system start-up.
Quote:
/usr/bin/truecrypt -k ~/keyfile --auto-mount=favorites
My problem with this method is, Truecrypt always search for the drive in the same path saved in favorite drives list, e.g. /dev/sdb1. However sometimes there are more than one flash drive plugged to my computer and my encrypted drive's path changes. In such cases Truecrypt cannot mount my encrypted drive because it cannot find the drive in its path.
As a workaround I tried "auto-mount=devices" parameter. It is slow because it checks every mounted drive, and some of them external hard disk big in size. Moreover it does not recognize any mount point parameter. I'd like to mount the drive to the same mount point every time.
Quote:
/usr/bin/truecrypt -t --auto-mount=devices -p "" -k ~/keyfile /media/MyMountPoint
The command above mounts the drive however it is slow and to the destination of "/media/treucrypt1".
Also I have all files it asks for installed including dostools..Btw I used usb creator, then went to gparted and did something. The system is fat 32 now but with same message, not including ext4 part. Just the mount point message, and something about dosftools and mtools, wihich also are installed.
View 4 Replies View RelatedI always have a problem in simple user mode when I insert a USB key. Can't mount, can't open with file manager. I'm obliged to open a simultaneous root session, to do what I want to manage the usb key.
In my user manager, I don't know wich group I have to add to this simple user (it's me) so I am allowed to manage the usb key.
Mount a remote drive over a network in 10.10 Gnome I could use an option (I think it was connect to remote server or something) where I could mount a windows folder share or a samba share, Since upgrading to 11.04 I cannot find this option, has it been removed or hidden?
View 7 Replies View RelatedI,ve upgraded Debian Testing to Gnome 3.18, acrivate from Online Accounts file integration of Google service.
In Nautilus left panel i see my Google Drive accounts but is impossible to mount , i have a generic error (impossible to mount position).
How i can fix this?
Same problem on Arch (Laptop).
The system is 11.1 32 bit and used to work ok
All the drives function and mount normally under Parted Magic.
Sometimes a cd will mount after 15 mins or so but if it is ejected it will not remount. after that event the dmesg output is 3 times as long. As it is 35K chrs long it is too long to post!
I have changed hardware and cables with no effect.
I have run the repair option on the install disk. I get a cannot find floppy error
It also reports cups, hal, ntp & postfix as errors but if I select repair it still returns the same next time I run the repair routine.
It also says the bootloader is faulty if I select repair I go into an infinite loop so I exit with skip. Anyway the system boots ok and runs just fine apart from the cd/fdd/usb problem
Due to the lack of a CD burner (at least one that works properly) I've been trying to install Debian on my laptop from a USB drive. I extracted the ISO contents onto my drive, made an entry in GRUB (on the flash drive - I'm booting from it) and can successfully begin the installation, but when it tries to mount the CD-ROM, obviously it can't, as there isn't one. I tried mounting the flash drive partition with the ISO contents to /cdrom manually, but I don't seem to be able to do so. I either get "No such device" or "Invalid argument". I CAN, however, mount the FAT32 partition of that flash drive (which oddly enough I cannot mount in Windows - go figure). The partition I need to mount is ext2. All of the partitions show up in /dev as well as /proc/filesystems.
Also, I'm using the netinstall to save space on my flash drive. ( http://cdimage.debian.org/debian-cd/...86-netinst.iso )
Why can't I mount my ext2 partition?
After update to 11.3 system mounts my player How i can disable this feature?
View 3 Replies View RelatedI'm just interested if there does exist any utility for creating bootable flash drives? I mean, if I could make somehow LiveCD with KDE desktop on openSUSE? I used Ubuntu and it had it's own utility with nice GUI, it just needed any bootable .ISO file or bootable CD/DVD and it created LiveCD on USB flash drive. So is there any chance to find something similar?
I work in a computer service center and it'll be very helpful (I think) to have bootable USB Flash dive with operating system to log into dead operating system partitions. Of course I have Windows LiveCD, but it has as much bugs as it's parent big brother.Oh, I forget to post my operating system versio. I'm using openSUSE 11.2 x64 with KDE version 4.3.5
USB Flash drive appearing in GParted but not auto mounting
GParted Screenshot:-
I had a USB flash drive that was working perfectly well with my openSUSE 11.3 laptop and my openSUSE 11.1 work desktop. That was until I was copying some files onto a friends Windows 7 laptop when it detected some errors and "fixed" them. Now when I plug the flash drive into my laptop I can read files but I can't write or erase. The mount output looks sane
Code:
/dev/sdb on /media/REMOVABLE type vfat (rw,nosuid,nodev,uid=1000,utf8,shortname=mixed,flush)
But it looks like the file system is mounted read only
[code]....
When i open dolphin and go to my flash drive, the files wont delete. When i delete them it keeps coming back. I already checked permissions as well.
I had it in during installation but didn't install it to there. Is that the issue?
If so how will I delete the folders?
I want to install OpenSUSE on a netbook I have that's currently running Mandriva.
I know often with a distro you can run the LiveCD/Live USB version from a USB Flash Drive. I understand maybe I can do that but want I want to do is do an actual install. Is this possible?
I assume I'd need to download the distro to my netbook under Mandriva and then after do an install and choose the USB Flash Drive after inserted as the hard drive to install to. Then when I boot up the computer I'd just choose the USB Drive as the bootup drive.
Is this possible though? Would it damage my Mandriva install? Like I said I know I can use the USB Flash Drive likely as a bootup/Live CD type of solution but since I will be using it semi-regularly and saving data at times I'd like to use it simply like another hard drive. Is this possible?
I have a 4gig usb flash drive that opensuse can not see. I have other usb drives that work fine.
View 10 Replies View RelatedI have a bit of a "problem" you can say. I have a computer with no cd/dvd drive nor a floppy drive. It does however have USB ports and ability to boot from LAN or USB-FDD, USB-CDROM, USB-HDD in the Bios setup menu.
I've been searching for a way to install openSUSE 11.2 on this computer using a flash drive I have but I'm not being able to even after following a number of suggestions from posts on the internet.
Anyone have any idea on what I should do?
I don't know why, but all of a sudden when I plug in a Corsair flash drive with a fat32 files system, it registers on the notifier, but when I try to open it in Dolphin, Dolphin opens in the /home/documents folder. Ditto when I try it as root. Media won't open to anything, and when I click on the Corsair listing in the folders on the left side of Dolphin, I get the error message: unknown file system 'vfat'. I have used this drive for over a year with no previous problems, and can access it in 11.3 on my laptop, so I suspect that a setting or something in my system has changed.
View 9 Replies View Related