OpenSUSE Hardware :: Usb Flash Drive Doesn't Auto-mount?
Sep 15, 2010
I recently upgraded to Gnome 2.30 and now usb drives don't auto-mount and show-up in Nautilus as a device.
I can mount the drive manually, but it would be nice if this happened automatically when I plugged it in.
View 9 Replies
ADVERTISEMENT
Apr 15, 2010
My Fedora does not auto detect a flash drive if I get to attach it with the OS already running. I still have to make a reboot and attached the drive right from the start in order for it to be detected/mounted.
Unlike In Mint 7, Ubuntu and XP, it automatically detects the flash drive as soon as it is attached.
make my Fedora detect the flash drive so that I would not have to reboot everytime I would use it.
FWIW here are some outputs:
Code: # /etc/fstab
# Created by anaconda on Thu Feb 4 06:06:47 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code].....
View 10 Replies
View Related
Mar 17, 2011
i bought i 32gb transcend flashdrive mainly to t0 another os.. but the problem is it doesnt mount in ubuntu 10.10 but is mounts in windows. when i type lsusb in my terminal after inserting ang again after removing it i see that there is one usb device which is shown when flash drive is inserted and dissapears when i remove my flash drive
View 9 Replies
View Related
Feb 15, 2011
USB Flash drive appearing in GParted but not auto mounting
GParted Screenshot:-
View 9 Replies
View Related
Feb 11, 2010
I'm running OpenSuse 11.2. I've got it running mostly the way I want and it connects to my wireless internet no problem. I have a external hard-drive on my Windows machine setup as a share folder. I can mount the drive with:
Code:
mount //10.13.23.2/D /home/james/mnt/win However when I do mount like this it doesn't give my any read/write privliages on the drive. Also on a slightly different issue but still mounting related I have my HDD partitioned into four main drives (not including swap etc). They are my Windows drive, a seperate storage partition formatted for Windows, my main linux drive and a seperate parition for linux storage.
I want to have my Windows drive, my Windows storage drive and my linux storage drive all mounted on boot. I tried adding these to fstab, and they mount fine but again I have no read/write permissions. My fstab looks like this:
Code:
/dev/disk/by-id/ata-WDC_WD2500BEVT-35ZCT0_WD-WXE908AE4273-part5 swap swap defaults 0 0
/dev/disk/by-id/ata-WDC_WD2500BEVT-35ZCT0_WD-WXE908AE4273-part6 / ext4
[code]....
Lastly I would like my Windows Share drive to mount on boot but I have been advised that I would need to write a shell script for this, to do network checks as obviously I won't always be connecting to my network.
View 6 Replies
View Related
Sep 17, 2010
I have been using Linux for a while but I am more used to Debian based distributions. With distributions like Ubuntu, I have been able to get my flash drives to work instantly. However, I have no idea how to mount one in OpenSuse. I do not have much experience in configuring stuff like this because distros usually do this for me.
View 1 Replies
View Related
Aug 28, 2010
After update to 11.3 system mounts my player How i can disable this feature?
View 3 Replies
View Related
Jul 19, 2010
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies
View Related
Aug 31, 2010
I have a hard time mounting two external drives on my Suse 11.3. When I use the device notifier gadget both drives get mounted in /media/<drive name>, the vfat drive is read-only though. However, I would like to mount both drives under /<drive name> in separate directories and rw. I looked at the devices in /dev/ and entered the device name to fstab, set the mount point, file system (vfat, and ntfs-3g) and set 'rw,noauto,exec,user,sync 0 0'.
This way I could mount my vfat drive read-only under /<drive name>, but not the ntfs one. After a reboot i noticed that the external drives get different IDs in /dev. E.g. what I had in my fstab under /dev/sdc1 got /dev/sdf1, and /dev/sdc was unknown. I am doing something wrong here, what worked in 11.0 does not seem to work here.
[code]...
View 2 Replies
View Related
Jun 10, 2011
Sometimes when I plug in a USB flash drive, it is mounted to /dev/usb0 instead of /dev/drivename. This poses a problem for me because I have applications that depend on files I keep on flash drives, and having to frequently change the file paths is difficult. I haven't been able to find anything on this topic with a cursory search on Google or through the Debian reference. Heck, I don't even know what /dev/usb0 is (though I would like to learn, in the interest of being less of a noob). This is happening on a Squeeze system running Gnome, so I believe nautilus is what's responsible for auto-mounting my flash drives.
Beyond that, I don't know what other information I should provide; if you need to know something else, ask me (and perhaps tell me how to access that information). Someone on IRC suggested that I didn't have my drives set to mount in /dev/, but I have no idea how I would go about fixing that. If there's a configuration file that deals with this sort of thing, chances are I haven't touched it since installing this system. Debian installer sees usb drive as cd drive, so it adds it in fstab, but with wrong file system options (udf,iso9660) which is not the one your flash drive uses.
View 13 Replies
View Related
Sep 17, 2010
Its annoying to unmount my flash drive twice.. its not a major problem actually but its kinda annoying , its whenever i plug-in my flash drive.. everything works well except when i need to un-mount it.. I usually unmount it twice using right-click of the mouse, then it mounts itself back, so i have to unmount it again.. Is there any way to control this? How do i setup the auto-mount option for USB flash drives?
View 1 Replies
View Related
Feb 19, 2009
I have a nfs share that does not automount all the time (may be one out of 10 time it automount properly). I basically have the same line in the fstab on my other 2 computers and no problem on these. I suspect that my wireless connection kick in too late (after fstab). Do you see a solution for delaying a few second the automount of the nfs share.
Code:
# Entry for nfs share on 192.168.1.20 :
192.168.1.20:/mnt/sdb5_data5 /mnt/sdb5_data5 nfs user,sync,rsize=8192,wsize=8192,exec,soft 0 0
View 4 Replies
View Related
Jul 23, 2011
I'm running 64 bit Ubuntu, 11.04. When I first installed, I could plug in my USB thumb drive and it was automatically mounted for me. Lately, this no longer happens... I use the Disk Utility to mount it manually. What I did wrong to lose this automatic mounting?
View 9 Replies
View Related
Jul 16, 2010
i'm working with x86 small computer having 128 ram and 233MHz speed in processor nd i'm going to do a project which need auto mounting of a pen drive if you can post a url that I can download those OS.
View 5 Replies
View Related
Feb 8, 2010
I wanted to mount a drive permanently that I see in my Places -> Network ->
I can add it no problem, but I want it to always mount it when it is available when I am not around.
Once I mount it in the GUI is there any way to make that mount a permanent one?
View 1 Replies
View Related
Sep 1, 2010
I just changed the os on my media server from Windows Home Server to Unbuntu 10.4 server. I got most of it working (samba, twonkymedia)
The only thing i have left to get working is the backup of that server. I installed bacula as i beleive it will do the job (unless someone has a better and simpler to configure idea) and i would like it to backup to my external usb 1Tb hard drive. I am able to mount the drive manually but this server gets turn on and off often to save power (and cut the electric bill) when not in use. I tried adding a line to fstab but when a do that, the server gets stuck on the startup even with the drive turned on. I read somewhere that i should use the UUID of the drive as it could change from sbd1 to sbh1 on restart so i did, same result.
View 4 Replies
View Related
Jun 20, 2010
I bought an 8GB flash drive because my D drive doesn't read DVDs. Anyway, my goal is to install Linux ubuntu and have it be my OS (replacing Windows XP). Last night I went to the Ubuntu homepage and downloaded the Ubuntu desktop edition 32-bit and put it on my flash drive. I followed the instructions on how to open and run it, but I was never asked about whether I want Linux to run side by side with Windows or if I want it to replace Windows. It downloaded the whole program, my computer restarted and then (on a black screen) it asked if I wanted to use Windows XP Home Edition or Linux Ubuntu. It's really frustrating because it took a while to download and install it in the first place AND to top that off, when I tried to use Ubuntu it went to a black screen and at the top said that there was an error. So I uninstalled all the ubuntu program and software and now I have a clean slate and want to try this again. I am a complete n00b. Could someone please walk me through how I can go about downloading (w/ links plz), installing and making ubuntu my ONLY OS on my computer via a flash drive? I'm desperate and I don't want to go through all of that and make the same mistake again!
View 9 Replies
View Related
Mar 28, 2011
How I can auto-mount a iSCSI drive into a folder? Because every time I reboot computer, I need to mount it manually.
View 3 Replies
View Related
Sep 26, 2010
The solution may to my problem may exist elsewhere, but I had trouble searching/finding it.I just bought a new external drive. The drive is formatted as ext4. I use it mainly in esata mode. Whenever I connect it, it mounts to /media/[UUID], where "[UUID]" is the UUID of the drive. I want it to be located at /media/backup when it is inserted, not in relation the UUID. I have tried putting a new line in my fstab (mount by UUID to folder) to mount the drive. It mounts correctly if the drive is connected to the computer and turned on during startup, but if the drive is off/not connected during startup Ubuntu barks at me. (I press 's' to skip mounting the drive) Is there a way to make external/removable drives mount to a certain location other than /media/[UUID] when they are inserted? I want the drive to mount to the folder while the computer is running, not only during startup.
View 3 Replies
View Related
Nov 13, 2010
I have this ubuntu machine that lives under my desk and is basically a utility machine. Mainly I ssh to it and get synchronize/backup files, etc.
When I reboot, for some reason the auto mount for my usb drives doesn't work until I actually hook up the monitor and log in to the gui. When I ssh in after reboot, I'm unable to access my USB drives! "Not Authorized"
I'm not sure how to mount a drive from the command line... really I just want the machine to auto mount the drives when it starts up... gui login or no.
View 4 Replies
View Related
Jun 18, 2011
I have a full working Mythbuntu 11.04 on a FakeRAID system (via ICH10R chipset). The OS is sitting on a 250GB partition and working fine. I am trying to get the 7.07TB partition mounted so that I can use it to store all my movies. When I mount it via the [URL] all works fine. When I reboot it cannot mount due to device being not ready or unavailable It appears the superblock goes missing at reboot. I have it formatted to ext4 with a GPT partition table. If I reformat and remount then all works fine again until I reboot.
[Code]...
View 3 Replies
View Related
Apr 24, 2010
I have the following combo dvd/cdrw drive: 'MATSHITA' 'UJDA730 DVD/CDRW'
Currently, the only way I get it to work is by manually mounting it, i.e.
Code:
mount -t iso9660 /dev/scd0 /media/cdrom0
How can I get this device to auto-mount when a cd is in it? Prior to Fedora 12, I had Ubuntu and it would auto-mount successfully.
NOTE:
I've already tried adding the following to fstab file:
Code:
/dev/scd0 /media/cdrom0 iso9660 noauto,user,exec,rw,sync 0 0
View 4 Replies
View Related
Jul 31, 2010
I am trying to have an encrypted drive auto-mounted once i log into Lucid.
I created the encrypted drive with the disk utility in administration menu
I also have the password remembered "forever" so when i am logged in i just click the icon for the drive on left panel and it mounts.
I am able to find the uuid and know what device is called sdd but i don`t know how to put it into fstab if that is possible?
View 1 Replies
View Related
Apr 7, 2011
Easiest way to auto mount an ext4 partition on my hard drive?
View 3 Replies
View Related
Nov 13, 2009
I upgraded Ubuntu 9.04 to 9.10 desktop a few weeks ago and an external USB drive that was mounting at startup on 9.04 is no longer mounting on 9.10. If I unplug the USB cable and plug it back in it comes up. The issue is strange in that when a regular non-admin logs in the drive auto mounts but does not for an admin login. I have not been able to put together search results that would lead me to a hint of why this would occur and/or what aresolution may be.Why would the drive auto mount when a regular user logs in but not auto mount for an admin? When I say admin I guess what I mean is a user with more privileges such as member of the admin group.
View 2 Replies
View Related
Jul 27, 2010
I wanted to auto mount one of my drives at the startup so I installed PySDM. After that every time I login to Ubuntu every single drive is mounted with a new name, for example one of my drives was located at /media/Local Disk and now it's /media/sda6, so every link to that drive including my audio library is gone. I unchecked the 'auto-mount at startup' option in PySDM and it didn't solve anything, I even uninstall PySDM and it everything is mounted as soon as Ubuntu starts up. The funny thing is there is a 10GB recovery drive on my hard disk that was never visible in Ubuntu and I was happy with that, but now it is mounted on startup too, with the name of sda1. What should I do?
View 9 Replies
View Related
Jan 4, 2011
I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection.I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives.I have created the directory /archive/ where I would like the drive(s) to mount.The drives are all formatted Fat 32 - but in the future I may use HFS for formatting.When I used the command (as root):mount /dev/sdc1 /archivethe drive was mounted (but read only)What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing)Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives?
View 2 Replies
View Related
May 3, 2010
Dropbox will not start properly because my Lucid installation is on a SS HD (/dev/sdc) but my data, including my Dropbox folder is on an internal NTFS-formatted HD (/dev/sda), and I also have another internal HD for backups (/dev/sdb).
For some reason I can get the backups HD to auto-mount on startup, but not the data HD. My fstab file looks like this:
View 3 Replies
View Related
Jan 22, 2011
I would like my Ubuntu server to show up as a drive on my XP home machine. I have loaded samba on to the server but I can only get it to show as the printer and faxes under my work group. Also is there a way to have my Ubuntu laptop to auto mount the server when I am on my home network?
View 6 Replies
View Related
Mar 4, 2011
Having a problem mounting a flash drive on slackware 13.0
tried using command: mount /dev/sdb1 /mnt/hd
Geting an error special device does not exist. sda1 is my hdd, also tried sdc sdd
View 2 Replies
View Related